How we researched this guide
We compared 5 products for this guide, checked maker spec sheets and listing documents for each pick, and reviewed owner reports for fitment, durability and day-to-day use. Where a maker does not publish a figure, this guide says so instead of filling the gap with a guess.
Nothing here is presented as hands-on test data. Maker ratings are written as rated figures, owner points are paraphrased and linked to their sources, and every product below carries its own verified affiliate button so you can check the current listing yourself.
The 30-second answer
For trucks the answer is Bushwacker Extend-A-Fender Flares 31906-01, Bushwacker OE-Style Flares 40923-02, Bushwacker Extend-A-Fender Front Pair 22003-11, Tyger Auto Factory Style Flares TG-FF6D4198, G-PLUS Pocket Rivet Flares for F-150. Fitment decides everything here: match year, bed and trim first, then choose the style you like.
Best for Toyota
Bushwacker Extend-A-Fender Flares 31906-01
Extended coverage for older Toyota pickups. Best if your truck runs oversized tyres and needs real protection.
Best OE Look
Bushwacker OE-Style Flares 40923-02
Factory-look coverage for Silverado trucks. Best if you want protection that looks stock.
Best Front Pair
Bushwacker Extend-A-Fender Front Pair 22003-11
Front-pair extended flares for Ford trucks. Best if only the fronts need coverage.
Best Paintable
Tyger Auto Factory Style Flares TG-FF6D4198
Paintable factory-style flares for Ram trucks. Best if you want a colour-matched finish.
Best Stance
G-PLUS Pocket Rivet Flares for F-150
Bolted pocket-rivet look for 2009 to 2014 F-150 Styleside trucks. Best if you want an off-road stance.
| Product | Fitment | Style | Finish | Check |
|---|---|---|---|---|
| Bushwacker Extend-A-Fender Flares 31906-01 | Toyota 1989-1995 | Extended | Smooth black | |
| Bushwacker OE-Style Flares 40923-02 | Silverado 2007-2014 | OE-style | Matte black | |
| Bushwacker Extend-A-Fender Front Pair 22003-11 | Ford trucks | Extend-A-Fender | Front pair | |
| Tyger Auto Factory Style Flares TG-FF6D4198 | Ram 2002-2009 | Factory style | Paintable | |
| G-PLUS Pocket Rivet Flares for F-150 | F-150 2009-2014 | Pocket rivet | Textured black |
Finder: match the flare to your truck
Flares are vehicle-specific, so every branch below names one pick from this article with its button. If no branch matches your truck, do not force a fit: find your own part number first.
Older Toyota pickup with oversized tyres: extended coverage here.
Silverado that should look stock: OE-style coverage here.
Ford truck where only the fronts need help: front pair here.
Ram that may be colour-matched later: paintable set here.
F-150 Styleside that wants an off-road stance: pocket style here.
How to choose fender flares for trucks
Fitment first, always
Flares are made for a specific year, make, model, cab and bed length. A flare for the wrong bed length or the wrong trim will not fit no matter how good it looks, so confirm every fitment field against your truck before ordering.
Coverage versus tyre size
Measure how far your tyres stick out past the bodywork, then choose a coverage style that covers them. OE-style flares suit near-stock tyres, Extend-A-Fender suits moderate upsizes, and pocket styles suit wide stances.
Style and finish
Smooth finishes look factory and paint well, textured finishes hide trail marks, and pocket-rivet styles make a styling statement. Pick the finish you will still like after a year of gravel roads, not just on delivery day.
Drilling and bodywork
No-drill sets protect ageing bodywork and resale value, while some styles need holes. If your truck is older or you plan to remove the flares later, favour no-drill designs and keep the original hardware.
Sensors and trim
Newer trucks carry sensors, cameras and trim in the fender area. Check clearance after fitting and confirm the flare does not cover a sensor or a side marker your truck needs.
Cleaning and paint care
Flares trap grit against paint, especially pocket styles with bolts. Plan to wash behind them after gravel use, and consider paint protection film on the contact edge if your truck sees rough roads often.
Truck fitment at a glance
Use this table to narrow the search, then confirm your exact truck against the maker listing before buying.
| Truck | Bed or body note | Flare fit |
|---|---|---|
| Toyota Pickup 1989-1995 | Standard pickup body | Bushwacker 31906-01 |
| Silverado 1500 2007-2013 | 6.5 ft or 8 ft bed, not dually | Bushwacker 40923-02 |
| Ford trucks, front pair | Vehicle-specific Ford fit | Bushwacker 22003-11 |
| Ram 1500 2002-2008 | 6.5 ft bed only | Tyger TG-FF6D4198 |
| F-150 Styleside 2009-2014 | Not Platinum or Raptor | G-PLUS pocket rivet |
Fender flares by budget
| Tier | What you get | Example pick |
|---|---|---|
| Value | Factory-style set for one truck family | Tyger Auto Factory Style Flares TG-FF6D4198 |
| Mid-range | Extended or OE-style Bushwacker set | Bushwacker Extend-A-Fender Flares 31906-01 |
| Styling | Pocket-rivet set for an off-road stance | G-PLUS Pocket Rivet Flares for F-150 |
Types of fender flare
| Type | Strengths | Best for |
|---|---|---|
| OE-style | Low profile, factory look, modest coverage | Daily drivers and work trucks |
| Extend-A-Fender | More coverage, still factory-like | Moderate tyre upsizes |
| Pocket rivet | Bolted look, bold stance | Off-road styled trucks |
| Factory style paintable | Stock lines, paint to match | Colour-matched builds |
Detailed reviews: fender flares for trucks
Each review below states fitment first, because a flare that does not fit your truck is useless however good it looks. Confirm your year, bed and trim against the listing before ordering.
Best for Toyota: Bushwacker Extend-A-Fender Flares 31906-01
Best for Toyota
Why the Bushwacker Extend-A-Fender Flares 31906-01 is our pick
Bushwacker Extend-A-Fender flares are built to add coverage for oversized tyres while keeping a factory-like look, and the 31906-01 set covers 1989 to 1995 Toyota pickups in a four-piece set with a smooth black finish. The Extend-A-Fender idea is simple: more coverage than stock, without the bulky off-road flare look, and Bushwacker lists no-drilling installation for the range. That matters on an older truck, where drilling fresh holes in ageing bodywork is a poor trade. The watch-out is fitment: this part number fits the listed Toyota years only, so confirm your cab and bed configuration before ordering.
Bushwacker Extend-A-Fender Flares 31906-01 key specs
- Part number: 31906-01
- Fitment: 1989-1995 Toyota Pickup
- Pieces: 4-piece set, front and rear
- Finish: smooth black
- Style: Extend-A-Fender extended coverage
- Installation: no drilling per maker range
- Material: thermoplastic construction
- UPC: 090689104342
- Position: front and rear
- Maker: Bushwacker
Bushwacker Extend-A-Fender Flares 31906-01: fits and best for
Best for owners of 1989 to 1995 Toyota pickups running wider or taller tyres than stock, and for anyone restoring an older truck who wants coverage without cutting bodywork. It is not a universal flare: other trucks need their own part numbers.
Bushwacker Extend-A-Fender Flares 31906-01 pros and watch-outs
- Extended coverage for oversized tyres
- Factory-like smooth finish
- No-drilling installation
- Four-piece complete set
- Fits listed Toyota years only
- Painting, if wanted, is extra work
- Older-truck fitment must be verified
Bushwacker Extend-A-Fender Flares 31906-01: what owners report
- Owners report the coverage finally stops spray on trucks with wider tyres.
- Owners praise the no-drill fit on trucks they did not want to cut.
- Owners note test-fitting before final tightening saves alignment trouble.
Bushwacker Extend-A-Fender Flares 31906-01: who should not buy
If your truck is not a 1989 to 1995 Toyota pickup, do not buy this part number. Find the Bushwacker or Tyger number for your own truck instead.
Bushwacker Extend-A-Fender Flares 31906-01: pair it with
Pair it with mud flaps for the rear wheels if spray still reaches the bodywork behind the flares.
We may earn a commission at no cost to you.
Tip: Measure tyre stick-out past the bodywork before choosing a coverage style. See best winch for pickup truck for truck sizing basics.
Best OE Look: Bushwacker OE-Style Flares 40923-02
Best OE Look
Why the Bushwacker OE-Style Flares 40923-02 is our pick
Bushwacker 40923-02 is an OE-style four-piece set for 2007 to 2013 Silverado 1500 and 2007 to 2014 Silverado 2500HD and 3500HD trucks, excluding dually models, and it exists for drivers who want tyre protection without changing the truck’s look. OE-style flares sit low and follow the factory lines, so they suit trucks that tow, work and commute rather than trucks built for a show stance. The set covers both bed lengths listed by the maker, 6.5-foot and 8-foot beds, which is worth confirming because bed length changes the rear flare. The trade-off is coverage: OE-style flares protect against spray and chips, but they do not cover the widest aftermarket tyres.
Bushwacker OE-Style Flares 40923-02 key specs
- Part number: 40923-02
- Fitment: 2007-2013 Silverado 1500, 2007-2014 Silverado 2500HD and 3500HD
- Excludes: dually models
- Bed lengths: 6.5 ft and 8 ft
- Pieces: 4-piece set
- Style: OE-style low profile
- Finish: matte black
- Material: thermoplastic construction
- Position: front and rear
- Maker: Bushwacker
Bushwacker OE-Style Flares 40923-02: fits and best for
Best for Silverado owners who want stock-looking protection for daily driving, towing and gravel roads. It suits trucks on near-stock tyre sizes, where the goal is paint protection rather than covering a wide stance.
Bushwacker OE-Style Flares 40923-02 pros and watch-outs
- Looks factory, not aftermarket
- Covers two bed lengths
- Four-piece complete set
- Suits work and tow trucks
- Not for dually trucks
- Coverage is modest, not wide
- Wide tyres need a different style
Bushwacker OE-Style Flares 40923-02: what owners report
- Owners report the flares blend in so well that visitors assume they are factory.
- Owners praise the fit on both bed lengths when the right set is ordered.
- Owners note dually owners must look elsewhere, since this set excludes them.
Bushwacker OE-Style Flares 40923-02: who should not buy
If you run wide aftermarket tyres that stick out past the body, OE-style coverage will not cover them. Choose an Extend-A-Fender or pocket-style set instead.
Bushwacker OE-Style Flares 40923-02: pair it with
Pair it with a bed-length check in your manual before ordering, since the rear flare depends on it.
We may earn a commission at no cost to you.
Tip: Test-fit every flare before painting or final tightening. Our best winch mounting plate for truck covers truck accessory fitting.
Best Front Pair: Bushwacker Extend-A-Fender Front Pair 22003-11
Best Front Pair
Why the Bushwacker Extend-A-Fender Front Pair 22003-11 is our pick
Bushwacker 22003-11 is a front pair of Extend-A-Fender flares for Ford trucks, and it earns its place for the common case where only the front wheels throw spray and chips onto the doors and bodywork. Buying a front pair instead of a full set saves money and fitting time when the rears are already covered or undamaged, and the Extend-A-Fender profile adds coverage for larger tyres without a bulky look. The maker lists a vehicle-specific fit, so the part number must match your Ford model and year, and the front-pair format means you must check whether your truck also needs rears before assuming the job is done.
Bushwacker Extend-A-Fender Front Pair 22003-11 key specs
- Part number: 22003-11
- Position: front pair
- Style: Extend-A-Fender extended coverage
- Finish: black
- Fit type: vehicle-specific fit
- UPC: 090689103543
- Material: thermoplastic construction
- Maker: Bushwacker
- Use: front wheel coverage
- Pairs with: rear flares if needed
Bushwacker Extend-A-Fender Front Pair 22003-11: fits and best for
Best for Ford truck owners whose front tyres are the problem, whether from wider tyres or from front spray on gravel. It suits drivers replacing damaged fronts without paying for a full set.
Bushwacker Extend-A-Fender Front Pair 22003-11 pros and watch-outs
- Front-only cost saving
- Extended coverage for larger tyres
- Vehicle-specific fit
- Factory-like appearance
- Front pair only, rears separate
- Fitment must match exactly
- Coverage varies by vehicle
Bushwacker Extend-A-Fender Front Pair 22003-11: what owners report
- Owners report the fronts alone solved most of their spray problem.
- Owners praise the factory-like look once fitted.
- Owners note checking the rear situation first avoids a second order.
Bushwacker Extend-A-Fender Front Pair 22003-11: who should not buy
If your rear tyres also throw spray, buy a full set instead of a front pair and a later mismatch. If your Ford year is not listed for this number, do not force it.
Bushwacker Extend-A-Fender Front Pair 22003-11: pair it with
Pair it with the matching rear pair if your rear tyres also sit outside the bodywork.
We may earn a commission at no cost to you.
Tip: Wash behind the flares after gravel roads so grit does not sit against the paint. See best truck winches for truck care.
Best Paintable: Tyger Auto Factory Style Flares TG-FF6D4198
Best Paintable
Why the Tyger Auto Factory Style Flares TG-FF6D4198 is our pick
Tyger Auto TG-FF6D4198 is a four-piece factory-style set for 2002 to 2008 Dodge Ram 1500 and 2003 to 2009 Ram 2500 and 3500 trucks with a 6.5-foot bed, finished in paintable fine-textured matte black. The paintable finish is the point: it can stay matte black for a work-truck look or be painted to match the body, which factory-style flares suit better than rugged pocket styles. Tyger builds its flares from impact-resistant polypropylene with injection moulding, and the factory style keeps the truck looking stock. The bed-length limit is strict, so confirm 6.5 feet before ordering, since other bed lengths need other part numbers.
Tyger Auto Factory Style Flares TG-FF6D4198 key specs
- Part number: TG-FF6D4198
- Fitment: 2002-2008 Ram 1500, 2003-2009 Ram 2500 and 3500
- Bed length: 6.5 ft only
- Pieces: 4-piece set
- Finish: paintable fine-textured matte black
- Style: factory style
- Material: impact-resistant polypropylene
- Maker: Tyger Auto
- Position: front and rear
- Installation: per maker instructions
Tyger Auto Factory Style Flares TG-FF6D4198: fits and best for
Best for Ram owners who want a stock look with the option of a colour-matched finish, and for work trucks where a matte finish is fine as-is. It suits trucks on near-stock tyres where protection, not stance, is the goal.
Tyger Auto Factory Style Flares TG-FF6D4198 pros and watch-outs
- Paintable for colour matching
- Factory-style stock look
- Impact-resistant polypropylene
- Four-piece complete set
- 6.5-foot bed only
- Ram fitment years are specific
- Painting adds cost if wanted
Tyger Auto Factory Style Flares TG-FF6D4198: what owners report
- Owners report the matte finish looks tidy even unpainted.
- Owners praise the factory lines once the set is fitted.
- Owners note the bed-length check is essential, since the wrong bed means the wrong rear flare.
Tyger Auto Factory Style Flares TG-FF6D4198: who should not buy
If your Ram has a different bed length, do not buy this number. If you want a rugged bolted look, a pocket-style flare fits that taste better.
Tyger Auto Factory Style Flares TG-FF6D4198: pair it with
Pair it with a test fit before painting, since painted flares cannot be returned once coated.
We may earn a commission at no cost to you.
Tip: Check sensor and trim clearance after fitting, especially on newer trucks. See best winch for Ford F-150 for bumper and sensor notes.
Best Stance: G-PLUS Pocket Rivet Flares for F-150
Best Stance
Why the G-PLUS Pocket Rivet Flares for F-150 is our pick
G-PLUS pocket-rivet flares for 2009 to 2014 Ford F-150 Styleside trucks bring the bolted off-road look: textured black, four pieces, front and rear, with a riveted pocket style that reads as purposeful rather than factory. The listing covers Styleside beds in 67-inch, 78.8-inch and 97.4-inch lengths, and it excludes Platinum and Raptor models, so fitment checking matters more here than on a plain factory set. The textured finish hides trail marks better than a smooth finish, and the pocket style adds visual width even before tyre size is considered. The trade-off is taste and cleaning: pocket flares collect dirt around the bolts and suit trucks that already lean off-road.
G-PLUS Pocket Rivet Flares for F-150 key specs
- Fitment: 2009-2014 Ford F-150 Styleside
- Bed lengths: 67 in., 78.8 in., 97.4 in.
- Excludes: Platinum and Raptor models
- Pieces: 4-piece set, front and rear
- Style: pocket rivet
- Finish: textured black
- OEM references: FO1269100, FO1268100
- Position: front and rear
- Maker: G-PLUS
- Use: tyre coverage and styling
G-PLUS Pocket Rivet Flares for F-150: fits and best for
Best for F-150 Styleside owners who want an off-road look and extra coverage for wider tyres, and who do not own a Platinum or Raptor. It suits trucks with a stance already, where factory flares would look lost.
G-PLUS Pocket Rivet Flares for F-150 pros and watch-outs
- Bold pocket-rivet styling
- Textured finish hides marks
- Covers three bed lengths
- Four-piece complete set
- Excludes Platinum and Raptor
- Pockets collect dirt
- Styling is not for everyone
G-PLUS Pocket Rivet Flares for F-150: what owners report
- Owners report the stance change is the first thing visitors notice.
- Owners praise the textured finish after gravel-road use.
- Owners note confirming Styleside and bed length first avoids a return.
G-PLUS Pocket Rivet Flares for F-150: who should not buy
If you own a Platinum or Raptor, or a Flareside bed, this set is not for you. If you want a factory look, choose an OE-style set instead.
G-PLUS Pocket Rivet Flares for F-150: pair it with
Pair it with a bed-length measurement from your own truck, not from memory, before ordering.
We may earn a commission at no cost to you.
Tip: Measure tyre stick-out past the bodywork before choosing a coverage style. See best winch for pickup truck for truck sizing basics.
Spec comparison
The table below puts the headline figures side by side. Where a maker does not publish a figure, the cell says so plainly.
| Product | Fitment | Style | Finish | Check |
|---|---|---|---|---|
| Bushwacker Extend-A-Fender Flares 31906-01 | Toyota 1989-1995 | Extended | Smooth black | |
| Bushwacker OE-Style Flares 40923-02 | Silverado 2007-2014 | OE-style | Matte black | |
| Bushwacker Extend-A-Fender Front Pair 22003-11 | Ford trucks | Extend-A-Fender | Front pair | |
| Tyger Auto Factory Style Flares TG-FF6D4198 | Ram 2002-2009 | Factory style | Paintable | |
| G-PLUS Pocket Rivet Flares for F-150 | F-150 2009-2014 | Pocket rivet | Textured black |
Editorial judgement, not test results. Rankings in this guide weigh maker specifications, fitment breadth, owner-reported reliability and how well each product matches the use case in the title. No product was lab-tested for this guide.
Fitment and installation basics
Fitting starts with measurement, not with the box: confirm year, make, model, cab, bed length and trim, then test-fit each flare loosely before tightening anything. Most sets here use existing mounting points or maker hardware, and a loose test fit shows alignment problems while they are still easy to fix. Our guides on best winch mounting plate for truck and mounting a winch to a front bumper cover truck accessory fitting and bumper work that often happens at the same time.
If you plan to paint, test-fit first and paint second, since painted flares usually cannot be returned. After fitting, check door and sensor clearance, wash behind the flares, and recheck fasteners after the first hundred miles of rough-road use. See best winch for pickup truck for truck sizing and best winch recovery kit for recovery gear that shares the same fitting weekend, plus how to install a winch on a truck, best winch for Jeep Wrangler and best winch for Toyota Tacoma for truck fitting context.
Safety essentials
- Never cut bodywork to force a flare to fit.
- Confirm sensor and side-marker clearance after fitting.
- Keep fasteners tight and recheck them after rough roads.
- Wash grit from behind flares so it does not wear paint.
- Do not paint before a full test fit.
- Check local rules on tyre coverage before buying wide flares.
The accessory picks below are the article’s own flare picks, each with its own button, for readers who want a second set or a matching pair.
Extended Toyota set: Bushwacker Extend-A-Fender Flares 31906-01.
OE-style Silverado set: Bushwacker OE-Style Flares 40923-02.
Pocket-rivet F-150 set: G-PLUS Pocket Rivet Flares for F-150.
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Flare will not align | Wrong bed length or trim | Reconfirm fitment and exchange for the right number |
| Edge lifts after fitting | Fasteners loose or surface dirty | Clean the surface, refit and tighten in sequence |
| Paint chips behind flare | Grit trapped against paint | Wash behind flares and add protection film |
| Sensor warning after fitting | Flare covers a sensor | Reposition or choose a sensor-safe style |
| Rattle on rough roads | Loose hardware | Tighten and recheck after the first rough trip |
| Colour mismatch after painting | Paint mixed without a test panel | Spray a test panel first and match in daylight |
Who should NOT buy these
Drivers with the wrong truck: if your year, bed or trim is not listed for a part number, do not buy it. Find your own number instead of forcing a fit.
Drivers who want universal flares: there is no honest universal truck flare. Vehicle-specific fit is the whole product here.
Drivers who will not maintain them: flares trap grit and need washing behind them. Neglected flares wear paint faster than no flares at all.
Drivers chasing extreme stance: if your tyres stick out far past the body, a standard flare will not cover them. Look at wide-body or custom options with local rules in mind.
Final verdict
Best for Toyota — Bushwacker Extend-A-Fender Flares 31906-01
Best OE Look — Bushwacker OE-Style Flares 40923-02
Best Front Pair — Bushwacker Extend-A-Fender Front Pair 22003-11
Best Paintable — Tyger Auto Factory Style Flares TG-FF6D4198
Best Stance — G-PLUS Pocket Rivet Flares for F-150
FAQ
How do I know which fender flares fit my truck?
Match year, make, model, cab, bed length and trim against the maker listing, in that order. Bed length alone changes the rear flare on many trucks, and trim exclusions such as Platinum or Raptor matter, so check every field, not just the year.
Do fender flares require drilling?
Some do and some do not. Bushwacker lists no-drilling installation for its Extend-A-Fender range, while other styles need holes. Check the listing for your part number before ordering, especially on an older truck.
Can I paint fender flares to match my truck?
Paintable sets such as the Tyger factory-style flares here can be painted, but always test-fit first, since painted flares usually cannot be returned. Spray a test panel and match the colour in daylight.
How much tyre coverage do I need?
Measure how far your tyres stick out past the bodywork. OE-style flares suit near-stock tyres, Extend-A-Fender suits moderate upsizes, and pocket styles suit wider stances. If the tyre sticks out far beyond the flare, the flare is not covering it.
Will flares damage my paint?
They can if grit sits behind them unwashed. Wash behind the flares after gravel roads and consider protection film on the contact edge. Properly fitted and maintained flares protect paint rather than harming it.
Do I need front and rear flares, or just fronts?
It depends on where the spray comes from. Many drivers find the fronts alone solve the problem, which is why front pairs exist, but if the rears also throw spray, a full set is the honest buy.
Are pocket-rivet flares real bolts or decoration?
On most aftermarket sets the pocket bolts are styling, with the flare held by hidden hardware. Check the listing for your set if real through-bolts matter to you, since it varies by maker.
Will flares affect my truck sensors?
They can on newer trucks if a flare covers a parking sensor, camera or side marker. Check clearance after fitting and choose a sensor-safe style if your truck carries sensors in the fender area.
Can I fit flares myself?
Most owners can, with basic tools, a test fit and patience. The hard part is fitment checking before ordering, not the fitting itself, so spend the time on year, bed and trim first.
Sources & changelog
- Bushwacker Extend-A-Fender 31906-01, Amazon listing
- Bushwacker OE-Style 40923-02, Amazon listing
- Bushwacker Extend-A-Fender Front Pair 22003-11, Amazon listing
- Tyger Auto TG-FF6D4198, Amazon listing
- G-PLUS Pocket Rivet Flares, Amazon listing
- Bushwacker 31906-01 product record
- Bushwacker OE-Style fitment notes, SD Wheel
- Tyger Auto fender flare instructions
Changelog — November 4, 2026: guide first published.
By Leo, Founder, WinchInsider
Leo covers recovery gear, diagnostic tools and truck accessories, working from maker documentation and owner reports so readers can buy once and buy right. More about the site: About WinchInsider.
Related guides
- Best winch for Ford F-150
- Best winch for pickup truck
- Best truck winches
- Best winch for Jeep Gladiator
- Best winch mounting plate for truck
- Fender Flares category archive
Top pick: Bushwacker Extend-A-Fender Flares 31906-01