The WARN PullzAll is a handheld 120V electric pulling tool that lifts or pulls up to 1,000 lb, and after digging into the spec sheet and owner feedback, the verdict is clear: it is an excellent shop and barn tool with few real competitors, but it is not a substitute for a mounted vehicle winch or a long-range portable winch. Buy it for controlled pulls near power, not for backcountry recovery.
WARN PullzAll Specs
| Spec | Detail |
|---|---|
| Model number | 885000 (120V corded) |
| Rated capacity | 1,000 lb lifting or pulling |
| Power | 120V AC (wall outlet or generator) |
| Rope | 15 ft x 7/32 in. wire rope |
| Line speed | 13.8 ft/min |
| Control | Variable-speed trigger, forward/reverse switch |
| Safety | Electronic load limiter with LED indicator, dynamic brake |
| Anchor | Swivel anchor hook |
| Weight | ~20 lb |
| Warranty | 1 year limited |
What It Actually Is
Think of the PullzAll less as a winch and more as a power tool that pulls. You hold it in your hands like a large drill, hook the swivel anchor to a fixed point, hook the rope to the load, and squeeze the trigger. The variable-speed trigger gives you fine control, which is exactly what you want when inching an engine onto a stand or tensioning a structure. There is no free-spool, so every inch of rope moves under power, and the dynamic brake holds the load when you release the trigger.
Strengths
True one-person portability. At around 20 lb it goes wherever you carry it: shop, barn, deer camp with a generator, job site. No mount, no vehicle, no permanent installation.
The electronic load limiter. This is the standout feature. An LED warns you as you approach the 1,000 lb limit and the tool stops pulling before you overload it. That is genuinely useful protection against the most common winching mistake: pulling until something breaks.
Variable speed control. The trigger is not on/off; it meters power like a drill trigger. Delicate jobs stay delicate.
WARN build and support. It is a WARN product with WARN’s parts and service network behind it, and owners consistently rate it well for reliability in the shop role it was designed for.
Weaknesses
15 feet of rope is short. This is the single biggest limitation. Fifteen feet covers engine hoists, shop pulls, and dragging a deer to the truck. It does not cover pulling a log 100 feet or any real recovery scenario.
Needs 120V AC. There is no battery and no 12V option in the current corded model. In the field that means a generator or an inverter, which partly defeats the portability story. (WARN previously made a 24V cordless NiMH version; it is discontinued and only available used.)
No free-spool. You cannot pull rope out by hand to reach the load; everything extends under power at 13.8 ft/min. Rigging takes longer than with a free-spooling winch.
One-year warranty. Short compared with WARN’s limited lifetime coverage on many vehicle winches. For a $330–$375 tool, that stings slightly.
How the Electronic Load Limiter Works
The load limiter is the PullzAll’s signature feature and worth understanding. As line tension climbs toward the 1,000 lb rating, an LED on the housing warns you that you are approaching the limit; at the limit, the electronics cut the pull before the motor stalls or something in the rigging fails. This matters more than it sounds: on a conventional winch, the failure mode for overloading is a stalled motor, a tripped breaker, or a broken component, and you find out which one by experiment. The PullzAll tells you first. For delicate work like tensioning a structure or seating an engine, that early warning is the difference between a controlled job and a damaged one.
The dynamic brake is the limiter’s partner. Release the trigger and the brake holds the load in place; there is no creep, no slow unwind. Combined with the variable-speed trigger, you get inch-level control in both directions, which is exactly what shop work demands.
Where the PullzAll Earns Its Keep
Owner feedback clusters around a handful of jobs where the PullzAll is close to ideal. Engine and transmission work tops the list: pulling an engine onto a stand, lowering a transmission into place, or holding a heavy component at an angle while you bolt it up. Farm and ranch owners use it for stretching fence wire and tensioning gates, where the variable speed beats the jerky pull of a come-along. Hunters hang it from a gambrel or beam for lifting game. Small-shop fabricators use it as a third hand for positioning steel. The common thread is controlled, short-distance pulling and lifting under 1,000 lb, within arm’s reach of a 120V outlet or a generator.
What it will not do is equally clear. Fifteen feet of rope rules out vehicle recovery, long yard pulls, and anything where the anchor is far from the load. If your jobs regularly exceed the rope length, you are buying the wrong tool.
A Note on the Discontinued 24V Model
WARN’s own documentation references an older cordless 24V PullzAll powered by NiMH battery packs. That version is discontinued; the current production model is the 120V corded 885000 reviewed here. Used 24V units surface occasionally, but batteries for a discontinued NiMH platform are a gamble, so buy used only if you can verify the packs hold a charge. Do not expect 12V vehicle-powered operation from any PullzAll: it was never a 12V tool.
Maintenance
Maintenance is minimal but not zero. Keep the wire rope clean and lightly lubricated, and inspect it for broken strands or kinks before each use; a damaged 7/32-inch rope under 1,000 lb of tension is not something to gamble with. Check that the swivel anchor hook moves freely and the safety latch closes. Store it indoors: the housing is built for shop environments, not for living in a truck bed through winter. If the load limiter LED stops working, treat the tool as unprotected and service it before the next heavy pull.
Who Should Buy It
Buy the PullzAll if you work in a shop, barn, or garage and regularly move loads under 1,000 lb: engines, transmissions, heavy equipment onto benches, tensioning gates and structures. Buy it if you want a controlled, one-person lifting aid and you have wall power or a generator. It is also a reasonable gift-grade tool for the person who has everything: it is genuinely fun to use.
Who Should Skip It
Skip it if your real need is vehicle recovery; 1,000 lb and 15 feet will not recover a stuck truck, and there is no mount. Skip it if you need long pulls in the backcountry; a drill winch is cheaper for light jobs and a gas capstan goes vastly further for heavy ones. Skip it if you have no reliable 120V source where you will use it.
PullzAll vs Drill Winch vs Capstan
| PullzAll 1000 | WARN Drill Winch 750 | PCW3000 capstan | |
|---|---|---|---|
| Capacity | 1,000 lb | 750 lb | 1,545 lb |
| Rope length | 15 ft | 40 ft | Unlimited |
| Power | 120V AC | Your drill | Gas engine |
| Weight | ~20 lb | ~12 lb | 21 lb |
| Price | ~$335–375 | ~$240 | ~$1,250 CAD |
| Best for | Shop precision pulls | Light grab-and-go jobs | Backcountry heavy pulls |
Safety Notes
Respect the 1,000 lb rating and let the load limiter do its job; an LED warning is not a suggestion. Do not spool out past the red paint mark on the rope (about 13 feet); the drum needs its wraps to hold. Keep hands clear of the fairlead and never stand in line with a tensioned rope. Like all winches, this is a pulling tool, not an elevator: never lift loads over people.
Frequently Asked Questions
Is the WARN PullzAll a winch?
It is a handheld electric pulling tool, not a vehicle recovery winch. It pulls or lifts up to 1,000 lb on 15 feet of wire rope, which suits shop and barn work but not stuck-vehicle recovery.
Can the PullzAll run on 12V from my truck?
No. The current model (885000) is 120V AC only and needs a wall outlet, generator, or inverter. There is no 12V version.
How far can the PullzAll pull?
Fifteen feet of rope, and you should not spool past the red mark at about 13 feet. For longer pulls, look at a drill winch or a gas capstan instead.
Can it lift an engine?
Yes, within its 1,000 lb rating. The variable-speed trigger and dynamic brake give good control for positioning engines and transmissions, but never lift loads over people.
Verdict
The WARN PullzAll earns its keep as a shop and barn pulling tool: 1,000 lb of variable-speed, load-limited pulling in a 20 lb handheld package is genuinely useful, and nothing else at this price does exactly that. Just buy it for what it is. If you need vehicle recovery or long field pulls, your money belongs elsewhere: a drill winch for light portable jobs or a gas capstan for serious backcountry work.