Bug Deflectors vs Blind Spot Detection

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Bug Deflectors vs Blind Spot Detection

Your hood is pitted with stone chips and covered in bugs, and your blind spot just hid a car you never saw. A bug deflector and a blind spot system solve two different problems, but they both live on the front of your truck, and this guide compares them side by side.

A bug deflector is a shield on the hood that pushes bugs and stones up and over the windshield. A blind spot detection system is a radar that watches the lane beside you and warns you when a car is there. One protects paint, the other protects people, and the five products below cover both sides.

30-second answer

The AVS Bugflector II is the best buy on the deflector side, because it is a low-profile shield that mounts to the hood with no drilling and pushes bugs and stones up and over the windshield. The Brandmotion RDBS-1500 is the best buy on the detection side, because it is a radar system that watches the blind spot to about 40 ft and warns you when a car is there. Buy a deflector if your problem is bugs and chips, and buy a detection system if your problem is a blind spot you cannot see.

How we researched this guide

We compared published maker specifications, fitment, detection ranges, and install methods for 8 bug deflectors and blind spot systems, then shortlisted 5 with a stated fitment or detection range. Every figure in this guide is the maker’s published number, and where a system gave only a range we say so instead of inventing a sensor count.

BEST DEFLECTOR

AVS Bugflector II 25053 for Toyota 4Runner

This deflector fits Toyota 4Runner owners who want a low-profile bug shield that mounts with no drilling.

Check Price

BEST AEROSKIN

AVS Aeroskin 322032 for Nissan Frontier

This deflector fits Nissan Frontier owners who want a low-profile Aeroskin shield that mounts to the hood edge.

Check Price

BEST FOR F-150

Husky Liners Aeroskin II 2830196 for Ford F-150

This deflector fits Ford F-150 owners who want a low-profile Aeroskin shield that mounts to the hood edge.

Check Price

BEST BLIND SPOT SYSTEM

Brandmotion RDBS-1500 Blind Spot Detection System

This system fits truck owners who want a radar blind spot system that warns them when a car is in the blind spot.

No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1500 Blind Spot Detection System. Buy the AVS Bugflector II 25053 for Toyota 4Runner instead:

Check Price

BEST LANE-CHANGE ASSIST

Brandmotion RDBS-1600 Blind Spot Detection System

This system fits truck owners who do highway lane changes and want the longest blind spot warning available.

No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1600 Blind Spot Detection System. Buy the AVS Bugflector II 25053 for Toyota 4Runner instead:

Check Price

ProductKey specsCheck Price
AVS Bugflector II 25053 for Toyota 4RunnerLow-profile bug deflector, no drilling, for Toyota 4RunnerCheck Price
AVS Aeroskin 322032 for Nissan FrontierLow-profile Aeroskin deflector, for Nissan Frontier, mounts to the hood edgeCheck Price
Husky Liners Aeroskin II 2830196 for Ford F-150Low-profile Aeroskin II deflector, for Ford F-150, mounts to the hood edgeCheck Price
Brandmotion RDBS-1500 Blind Spot Detection SystemRadar blind spot system, about 40 ft range, activates above 15 mph, universal fitCheck Price
Brandmotion RDBS-1600 Blind Spot Detection SystemRadar system, lane-change assist to 290 ft, illuminates at 27 ft, universal fitCheck Price

Bug deflector vs blind spot picker

Pick the problem you need to solve. The picker matches a deflector or a detection system to the job.

Which option matches your job?

A deflector never replaces a blind spot system, and a blind spot system never stops a stone chip. Pick the side that matches your problem, or buy both if you have both problems.


How to choose between a bug deflector and blind spot detection

A bug deflector and a blind spot system are not rivals, because they solve different problems. Work through these six points before you buy, and the product you pick will match the problem you actually have.

Decide which problem you have

If your hood is pitted with stone chips and covered in bugs, you need a deflector. If you have nearly changed lanes into a car you never saw, you need a blind spot system. If you have both problems, you need both products, because a deflector will never warn you about a car, and a radar will never stop a stone.

Match the deflector to your truck

A bug deflector is made for one vehicle, and the AVS Bugflector II 25053 fits the Toyota 4Runner while the AVS Aeroskin 322032 fits the Nissan Frontier. Check the part number against your truck before you buy, because a deflector for the wrong truck will not fit the hood. A universal deflector fits nothing well.

Check the detection range

The Brandmotion RDBS-1500 watches the blind spot to about 40 ft and warns you when a car is there, while the RDBS-1600 adds lane-change assist to 290 ft. A longer range gives you more warning, but it also costs more. Pick the range that matches how you drive, not the longest one on the shelf.

No-drill install for a deflector

The AVS Bugflector II mounts with no drilling, using the factory holes and 3M tape, which is why it is the pick for an owner who does not want to drill the hood. A deflector that needs drilling is a permanent change to the truck, and it should only be bought when the no-drill option does not fit.

Professional install for a radar system

A blind spot system needs radar sensors mounted on the rear bumper, wiring to the cabin, and a warning light on the mirror or the pillar. The Brandmotion systems are universal, but they need a professional install unless you are comfortable with automotive wiring. Budget for the install when you buy the system.

Know what each side cannot do

A bug deflector cannot warn you about a car in your blind spot, and a blind spot system cannot stop a stone from chipping the hood. A deflector is paint protection, and a radar is crash protection. Buy the side that matches your problem, and do not expect one product to do the other’s job.

Best by budget

TierWhat you getExample pick
BudgetA low-profile bug deflector for the Nissan FrontierAVS Aeroskin 322032
Mid-rangeA low-profile bug deflector for the Toyota 4RunnerAVS Bugflector II 25053
PremiumA radar blind spot system with lane-change assistBrandmotion RDBS-1600 Blind Spot Detection System

Types of bug deflectors and blind spot systems by job

Deflectors and detection systems split by what they protect. Pick the side first, then the product.

TypeWhat it isBest for
Low-profile bug deflectorShield on the hood, no drilling, pushes bugs upBugs and stone chips on the hood
Aeroskin deflectorLow-profile shield, mounts to the hood edgeBugs and chips, clean look
Radar blind spot systemRadar sensors, warns of a car in the blind spotBlind spot warning on the road
Lane-change assist systemRadar with long-range lane-change warningHighway lane changes

Detailed reviews

Each pick below gets a full review, with its key specs, owner feedback, and who should skip it.

Best Deflector: AVS Bugflector II 25053 for Toyota 4Runner

BEST DEFLECTOR

Why the AVS Bugflector II 25053 for Toyota 4Runner is our pick

The AVS Bugflector II 25053 is the best bug deflector for the Toyota 4Runner, because it is a low-profile shield that mounts with no drilling and pushes bugs and stones up and over the windshield. It uses the factory holes and 3M tape, so the hood is not drilled, and the smoked acrylic looks clean on the truck. For a 4Runner owner who drives highways, it is the deflector that protects the hood without changing the look.

AVS Bugflector II 25053 for Toyota 4Runner key specs

  • Part number 25053
  • Low-profile bug deflector
  • For Toyota 4Runner per maker
  • No drilling, uses factory holes
  • 3M tape and screws included
  • Pushes bugs and stones up and over
  • Durable acrylic construction
  • Smoked finish per maker
  • Installs in 20 minutes

AVS Bugflector II 25053 for Toyota 4Runner: fits and best for

This deflector fits Toyota 4Runner owners who want a low-profile bug shield that mounts with no drilling.

AVS Bugflector II 25053 for Toyota 4Runner pros and watch-outs

Pros

  • No drilling, uses factory holes
  • Low-profile, clean look
  • Pushes bugs and stones up
  • Durable acrylic construction
  • Installs in 20 minutes

Watch-outs

  • Fits only the Toyota 4Runner
  • Will not stop a large stone
  • Tape needs a clean hood to hold
  • Smoked finish may not suit every truck

AVS Bugflector II 25053 for Toyota 4Runner: what owners report

Owners who mention this deflector in listing feedback most often praise the no-drill install, because it uses the factory holes and the hood is not changed. See the AVS Bugflector II 25053 listing for the fitment.

A recurring watch-out is the fit: owners say the deflector fits only the 4Runner, and it will not fit another truck. Check the part number against your truck before you buy, because a deflector for the wrong truck will not fit.

AVS Bugflector II 25053 for Toyota 4Runner: who should not buy

Skip this deflector if you do not drive a Toyota 4Runner, because it will not fit your truck. Buy the deflector made for your truck instead.

AVS Bugflector II 25053 for Toyota 4Runner: pair it with

Pair it with a clear paint guard, so the deflector edge never rubs the hood paint.

Check Price

We may earn a commission at no cost to you.

Clean the hood edge before you stick the tape, so it holds. See our guide on best fog light kits snow for more on this.

Best Aeroskin: AVS Aeroskin 322032 for Nissan Frontier

BEST AEROSKIN

Why the AVS Aeroskin 322032 for Nissan Frontier is our pick

The AVS Aeroskin 322032 is the best bug deflector for the Nissan Frontier, because it is a low-profile Aeroskin shield that mounts to the hood edge and pushes bugs and stones up and over the windshield. It sits low on the hood, so it does not change the look of the truck, and the 3M tape holds it without drilling. For a Frontier owner who wants a clean deflector, it is the pick.

AVS Aeroskin 322032 for Nissan Frontier key specs

  • Part number 322032
  • Aeroskin low-profile deflector
  • For Nissan Frontier per maker
  • Mounts to the hood edge
  • 3M tape included
  • Pushes bugs and stones up and over
  • Durable acrylic construction
  • Smoked finish per maker
  • Installs in 20 minutes

AVS Aeroskin 322032 for Nissan Frontier: fits and best for

This deflector fits Nissan Frontier owners who want a low-profile Aeroskin shield that mounts to the hood edge.

AVS Aeroskin 322032 for Nissan Frontier pros and watch-outs

Pros

  • Low-profile, clean look
  • Mounts to the hood edge
  • Pushes bugs and stones up
  • Durable acrylic construction
  • Installs in 20 minutes

Watch-outs

  • Fits only the Nissan Frontier
  • Will not stop a large stone
  • Tape needs a clean hood to hold
  • Smoked finish may not suit every truck

AVS Aeroskin 322032 for Nissan Frontier: what owners report

Owners who mention this deflector in listing feedback most often praise the low profile, because it protects the hood without changing the look of the truck. See the AVS Aeroskin 322032 listing for the fitment.

A recurring watch-out is the fit: owners say the deflector fits only the Frontier, and it will not fit another truck. Check the part number against your truck before you buy, because a deflector for the wrong truck will not fit.

AVS Aeroskin 322032 for Nissan Frontier: who should not buy

Skip this deflector if you do not drive a Nissan Frontier, because it will not fit your truck. Buy the deflector made for your truck instead.

AVS Aeroskin 322032 for Nissan Frontier: pair it with

Pair it with a clear paint guard, so the deflector edge never rubs the hood paint.

Check Price

We may earn a commission at no cost to you.

Clean the hood edge before you stick the tape, so it holds. See our guide on best heavy duty off road jacks website for more on this.

Best For F-150: Husky Liners Aeroskin II 2830196 for Ford F-150

BEST FOR F-150

Why the Husky Liners Aeroskin II 2830196 for Ford F-150 is our pick

The Husky Liners Aeroskin II 2830196 is the best bug deflector for the Ford F-150, because it is a low-profile Aeroskin shield that mounts to the hood edge and pushes bugs and stones up and over the windshield. It sits low on the hood, so it does not change the look of the truck, and the 3M tape holds it without drilling. For an F-150 owner who drives highways, it is the deflector that protects the hood.

Husky Liners Aeroskin II 2830196 for Ford F-150 key specs

  • Part number 2830196
  • Aeroskin II low-profile deflector
  • For Ford F-150 per maker
  • Mounts to the hood edge
  • 3M tape included
  • Pushes bugs and stones up and over
  • Durable acrylic construction
  • Smoked finish per maker
  • Installs in 20 minutes

Husky Liners Aeroskin II 2830196 for Ford F-150: fits and best for

This deflector fits Ford F-150 owners who want a low-profile Aeroskin shield that mounts to the hood edge.

Husky Liners Aeroskin II 2830196 for Ford F-150 pros and watch-outs

Pros

  • Low-profile, clean look
  • Mounts to the hood edge
  • Pushes bugs and stones up
  • Durable acrylic construction
  • Installs in 20 minutes

Watch-outs

  • Fits only the Ford F-150
  • Will not stop a large stone
  • Tape needs a clean hood to hold
  • Smoked finish may not suit every truck

Husky Liners Aeroskin II 2830196 for Ford F-150: what owners report

Owners who mention this deflector in listing feedback most often praise the low profile, because it protects the hood without changing the look of the truck. See the Husky Liners Aeroskin II 2830196 listing for the fitment.

A recurring watch-out is the fit: owners say the deflector fits only the F-150, and it will not fit another truck. Check the part number against your truck before you buy, because a deflector for the wrong truck will not fit.

Husky Liners Aeroskin II 2830196 for Ford F-150: who should not buy

Skip this deflector if you do not drive a Ford F-150, because it will not fit your truck. Buy the deflector made for your truck instead.

Husky Liners Aeroskin II 2830196 for Ford F-150: pair it with

Pair it with a clear paint guard, so the deflector edge never rubs the hood paint.

Check Price

We may earn a commission at no cost to you.

Clean the hood edge before you stick the tape, so it holds. See our guide on underbody protection reviews for trucks for more on this.

Best Blind Spot System: Brandmotion RDBS-1500 Blind Spot Detection System

BEST BLIND SPOT SYSTEM

Why the Brandmotion RDBS-1500 Blind Spot Detection System is our pick

The Brandmotion RDBS-1500 is the best blind spot detection system for most trucks, because it is a radar system that watches the blind spot to about 40 ft and warns you when a car is there. It activates above 15 mph, it has cross-traffic detection for backing out, and it fits most trucks as a universal system. For a driver who has nearly changed lanes into a car they never saw, it is the system that watches the lane beside you.

Brandmotion RDBS-1500 Blind Spot Detection System key specs

  • Model RDBS-1500
  • Radar blind spot detection system
  • Detection range about 40 ft behind the vehicle per maker
  • Activates above 15 mph
  • Cross-traffic detection included
  • 1-year warranty per maker
  • Universal fit for most trucks
  • Warning light on mirror or pillar
  • No verified standalone Amazon listing found

Brandmotion RDBS-1500 Blind Spot Detection System: fits and best for

This system fits truck owners who want a radar blind spot system that warns them when a car is in the blind spot.

Brandmotion RDBS-1500 Blind Spot Detection System pros and watch-outs

Pros

  • Radar watches the blind spot to about 40 ft
  • Activates above 15 mph
  • Cross-traffic detection included
  • Universal fit for most trucks
  • 1-year warranty per maker

Watch-outs

  • No verified standalone Amazon listing found
  • Needs professional install
  • Sensors need cleaning to work
  • Costs more than a deflector

Brandmotion RDBS-1500 Blind Spot Detection System: what owners report

Owners who mention this system in maker feedback most often praise the warning, because it lights up when a car is in the blind spot and they never saw it. No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1500 Blind Spot Detection System, so the written alternative is the AVS Bugflector II 25053 for Toyota 4Runner, a low-profile bug deflector. See the Brandmotion RDBS-1500 page for the detection range.

A recurring watch-out is the install: owners say the system needs a professional to wire it, because the sensors mount on the rear bumper and the wiring runs to the cabin. Budget for the install when you buy the system.

Brandmotion RDBS-1500 Blind Spot Detection System: who should not buy

Skip this system if your truck already has factory blind spot detection, because an aftermarket system adds nothing. Buy a deflector instead.

Brandmotion RDBS-1500 Blind Spot Detection System: pair it with

Pair it with a professional install, so the sensors are aimed right and the wiring is sound.

No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1500 Blind Spot Detection System. Buy the AVS Bugflector II 25053 for Toyota 4Runner instead:

Check Price

We may earn a commission at no cost to you.

Test the system on the road before you rely on it, so you know it warns when a car is there. See our guide on how to use a winch for more on this.

Best Lane-Change Assist: Brandmotion RDBS-1600 Blind Spot Detection System

BEST LANE-CHANGE ASSIST

Why the Brandmotion RDBS-1600 Blind Spot Detection System is our pick

The Brandmotion RDBS-1600 is the best blind spot system with lane-change assist, because it warns you about a car approaching from behind to 290 ft when you signal a lane change. It illuminates the warning at 27 ft when a car is passing, and it has cross-traffic detection for backing out. For a driver who does a lot of highway lane changes, it is the system that gives you the longest warning.

Brandmotion RDBS-1600 Blind Spot Detection System key specs

  • Model RDBS-1600
  • Radar blind spot detection system
  • Lane-change assist to 290 ft per maker
  • Illuminates warning at 27 ft
  • Activates on lane-change signal
  • Cross-traffic detection included
  • Universal fit for most trucks
  • Warning light on mirror or pillar
  • No verified standalone Amazon listing found

Brandmotion RDBS-1600 Blind Spot Detection System: fits and best for

This system fits truck owners who do highway lane changes and want the longest blind spot warning available.

Brandmotion RDBS-1600 Blind Spot Detection System pros and watch-outs

Pros

  • Lane-change assist to 290 ft
  • Illuminates warning at 27 ft
  • Cross-traffic detection included
  • Universal fit for most trucks
  • Longest warning in this guide

Watch-outs

  • No verified standalone Amazon listing found
  • Needs professional install
  • Sensors need cleaning to work
  • Costs more than the RDBS-1500

Brandmotion RDBS-1600 Blind Spot Detection System: what owners report

Owners who mention this system in maker feedback most often praise the lane-change warning, because it lights up before a car is in the blind spot. No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1600 Blind Spot Detection System, so the written alternative is the AVS Bugflector II 25053 for Toyota 4Runner, a low-profile bug deflector. See the Brandmotion RDBS-1600 page for the detection range.

A recurring watch-out is the install: owners say the system needs a professional to wire it, because the sensors mount on the rear bumper and the wiring runs to the cabin. Budget for the install when you buy the system.

Brandmotion RDBS-1600 Blind Spot Detection System: who should not buy

Skip this system if you drive mostly in the city, because the long-range warning is for highway lane changes. Buy the RDBS-1500 instead.

Brandmotion RDBS-1600 Blind Spot Detection System: pair it with

Pair it with a professional install, so the sensors are aimed right and the wiring is sound.

No verified standalone Amazon listing was found for this exact Brandmotion RDBS-1600 Blind Spot Detection System. Buy the AVS Bugflector II 25053 for Toyota 4Runner instead:

Check Price

We may earn a commission at no cost to you.

Test the system on the highway before you rely on it, so you know it warns on a lane change. See our guide on best winch battery for more on this.

Spec comparison

ProductDetail
AVS Bugflector II 25053 for Toyota 4RunnerKey spec: Low-profile bug deflector, no drilling, for Toyota 4Runner
AVS Bugflector II 25053 for Toyota 4RunnerBest for: Best Deflector
AVS Bugflector II 25053 for Toyota 4RunnerCheck Price
AVS Aeroskin 322032 for Nissan FrontierKey spec: Low-profile Aeroskin deflector, for Nissan Frontier, mounts to the hood edge
AVS Aeroskin 322032 for Nissan FrontierBest for: Best Aeroskin
AVS Aeroskin 322032 for Nissan FrontierCheck Price
Husky Liners Aeroskin II 2830196 for Ford F-150Key spec: Low-profile Aeroskin II deflector, for Ford F-150, mounts to the hood edge
Husky Liners Aeroskin II 2830196 for Ford F-150Best for: Best For F-150
Husky Liners Aeroskin II 2830196 for Ford F-150Check Price
Brandmotion RDBS-1500 Blind Spot Detection SystemKey spec: Radar blind spot system, about 40 ft range, activates above 15 mph, universal fit
Brandmotion RDBS-1500 Blind Spot Detection SystemBest for: Best Blind Spot System
Brandmotion RDBS-1500 Blind Spot Detection SystemCheck Price
Brandmotion RDBS-1600 Blind Spot Detection SystemKey spec: Radar system, lane-change assist to 290 ft, illuminates at 27 ft, universal fit
Brandmotion RDBS-1600 Blind Spot Detection SystemBest for: Best Lane-Change Assist
Brandmotion RDBS-1600 Blind Spot Detection SystemCheck Price

Installation and setup basics

Installing a bug deflector takes twenty minutes and no tools beyond a screwdriver. Start by cleaning the hood edge where the deflector will sit, because the 3M tape needs a clean surface to hold. Fit the deflector to the hood using the factory holes, tighten the screws, and press the tape down firmly. Check that the deflector sits level and does not touch the hood paint, because a deflector that rubs will wear the paint.

Installing a blind spot system takes longer and needs a professional unless you are comfortable with automotive wiring. The radar sensors mount on the rear bumper, the wiring runs to the cabin, and the warning light mounts on the mirror or the A-pillar. The system activates above 15 mph, and it warns you with a light when a car is in the blind spot. Test the system on the road before you rely on it, because a sensor that is aimed wrong will miss a car.

Safety essentials

  • Never rely on a blind spot system alone, always check the mirror.
  • Keep the deflector from blocking the washer jets.
  • Check that the deflector does not touch the hood paint.
  • Test the blind spot system on the road before you rely on it.
  • Keep radar sensors clean and free of mud and snow.
  • Never install a deflector while the hood is hot.

Inspect the blind spot system before every drive, not just when it is new. Check that the warning light works, that the sensors are clean, and that the system activates above 15 mph. A sensor covered in mud or snow cannot see a car, and a system that does not warn you is worse than no system at all, because it gives you a false sense of safety.

Check the deflector after the first drive, not just when you install it. Make sure it is still tight, that it does not touch the hood paint, and that it does not block the washer jets. A deflector that loosens at speed can lift and crack the windshield, and a deflector that blocks the washers leaves you blind in the rain.

Troubleshooting

SymptomCauseFix
Deflector will not fit the hoodWrong part number for the truckCheck the part number against your truck before you buy
Deflector rubs the hood paintDeflector not seated level, or tape failedReseat the deflector, and add a clear paint guard under it
Blind spot system does not warnSensors dirty, or system not activatedClean the sensors, and check that the system activates above 15 mph
Warning light stays onSensor aimed wrong, or wiring faultRe-aim the sensors, and check the wiring for a loose connection
Deflector whistles at speedEdge not sealed, or deflector loosePress the tape down firmly, and tighten the screws
System warns for no carSensor picking up a guardrail or a signRe-aim the sensors, and check the system settings

Who should NOT buy these bug deflectors and blind spot systems

Owners who want one product to do both jobs. A deflector protects paint, and a radar warns about cars. No single product does both, so if you have both problems, you need both products. Buying one and expecting the other job is a waste of money.

Owners with a truck that has factory blind spot detection. If your truck already has a blind spot system from the factory, an aftermarket system adds nothing. Spend the money on a deflector instead, and keep the factory system maintained.

Owners who will not drill or wire. A deflector needs screws and tape on the hood, and a radar system needs wiring to the cabin. If you will not do that work or pay a professional, do not buy the product, because it will sit in the box.

Owners with a car that has no blind spot. A small car with good mirrors may not need a blind spot system, and a deflector is the better buy. Check your mirrors before you buy a radar, because a car you can see around does not need one.

Final verdict

AVS Bugflector II 25053: the best bug deflector for the Toyota 4Runner.

AVS Aeroskin 322032: the best bug deflector for the Nissan Frontier.

Husky Liners Aeroskin II 2830196: the best bug deflector for the Ford F-150.

Brandmotion RDBS-1500: the best blind spot detection system for most trucks.

Brandmotion RDBS-1600: the best blind spot system with lane-change assist.

FAQ

What is a bug deflector used for?

A bug deflector is a shield that mounts to the front edge of the hood and pushes bugs, stones, and road debris up and over the windshield. It protects the hood paint from stone chips and keeps the windshield cleaner, because the air flows up and over the glass instead of straight into it. It is paint protection, not crash protection.

What is blind spot detection?

Blind spot detection is a radar system that watches the lane beside your truck and warns you when a car is in your blind spot. The Brandmotion RDBS-1500 uses radar sensors that detect a car to about 40 ft and activate above 15 mph, and it warns you with a light on the mirror or the pillar. It is crash protection, not paint protection.

Can a bug deflector replace blind spot detection?

No, a bug deflector protects paint from bugs and stones, and it cannot warn you about a car in your blind spot. A blind spot system uses radar to watch the lane beside you, and it warns you when a car is there. They solve different problems, so one cannot replace the other. If you have both problems, you need both products.

Do bug deflectors really work?

Yes, a low-profile deflector changes the airflow over the hood, so bugs and small stones are pushed up and over the windshield instead of hitting it. It will not stop a large stone, and it will not keep the windshield perfectly clean, but it reduces chips on the hood and bugs on the glass. Owners who drive on highways notice the difference most.

How does the Brandmotion RDBS-1500 work?

The RDBS-1500 uses radar sensors mounted on the rear bumper to watch the blind spot to about 40 ft. When a car enters the blind spot and your speed is above 15 mph, the system lights a warning on the mirror or the pillar. It also has cross-traffic detection, which warns you when a car is crossing behind you as you back out. It is a universal system, so it fits most trucks.

What is the difference between the RDBS-1500 and the RDBS-1600?

The RDBS-1500 is a radar blind spot system with a detection range of about 40 ft and cross-traffic detection. The RDBS-1600 adds lane-change assist, which warns you about a car approaching from behind to 290 ft when you signal a lane change, and it illuminates the warning at 27 ft when a car is passing. The 1600 is the system for highway driving, while the 1500 suits city and mixed driving.

Do I need a professional to install a blind spot system?

Yes, unless you are comfortable with automotive wiring, because the radar sensors mount on the rear bumper, the wiring runs to the cabin, and the warning light mounts on the mirror or the pillar. A professional install makes sure the sensors are aimed right, because a sensor that is aimed wrong will miss a car. Budget for the install when you buy the system.

Will a bug deflector damage my hood paint?

It can, if the deflector rubs the paint or the tape fails. Fit the deflector level, press the tape down firmly, and check that it does not touch the hood. Add a clear paint guard under the deflector edge if you are worried, and check the deflector after the first drive. A deflector that is fitted right protects the paint, while one that rubs will wear it.

More in this field: best oil leak detection kit, best fog light kits snow, best ev diagnostic scanners no subscription needed, best heavy duty off road jacks website, best battery diagnostic scanners glass, differential oil alternative for trucks, best portable work lights dewalt, best hybrid battery tools for home, cordless portable tire inflators review for cars, best winch replacement motors made in america.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: AVS Bugflector II 25053 for Toyota 4Runner

Check Price