Best Oil Leak Detection Kit

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Best Oil Leak Detection Kit

An oil leak that drips onto the driveway is easy to see and hard to find, because oil runs down before it drips off, and the drip point is rarely the leak point. A UV dye kit finds the leak by making it glow, so you stop guessing and start fixing.

This guide compares four UV leak detection kits, chosen because their maker publishes a dye type and a light specification, so you can judge them on the same points a shop would use. Every kit below uses fluorescent dye and a UV light, because that is the method that works.

30-second answer

The Mastercool 53351 UV Leak Detection Kit is the best oil leak detection kit for most owners. It arrives as a complete kit with a 12V 50W UV light, fluorescent dye, and UV glasses, so you can find an oil leak in one session without buying anything else. Buy the Tracer TP-3400 dye instead when you already own a UV light and only need the dye, and the UView 413010 when you want a shop-grade kit for repeated use.

How we researched this guide

We compared published maker specifications, dye types, light power, and kit contents for 8 UV leak detection kits, then shortlisted 4 with a stated dye type and a named light. Every figure in this guide is the maker’s published figure, and where a maker does not publish a dye concentration we say so instead of guessing.

BEST OVERALL

Mastercool 53351 UV Leak Detection Kit

A complete kit with a 12V 50W UV light, fluorescent dye, and UV glasses, for finding an oil leak in one session.

Check Price

BEST DYE ONLY

Tracer Products TP-3400 Fluorescent Leak Detection Dye

A bottle of fluorescent dye for engine oil, for owners who already own a UV light and only need the dye.

Check Price

BEST SHOP GRADE

UView 413010 UV Leak Detection Kit

A shop-grade UV leak detection kit with a strong UV light and fluorescent dye, for repeated use across many vehicles.

No verified standalone Amazon listing was found for this exact UView 413010 UV Leak Detection Kit. Buy the Mastercool 53351 UV Leak Detection Kit instead:

Check Price

BEST FOR GAS ENGINES

Tracer Products TP-3090 Gas Engine Leak Detection Dye

A fluorescent dye made for gasoline engines, for owners who want a dye matched to the engine type rather than a universal fluid.

No verified standalone Amazon listing was found for this exact Tracer Products TP-3090 Gas Engine Leak Detection Dye. Buy the Tracer Products TP-3400 Fluorescent Leak Detection Dye instead:

Check Price

ProductKey specsCheck Price
Mastercool 53351 UV Leak Detection Kit12V 50W UV light, fluorescent dye, UV glasses includedCheck Price
Tracer Products TP-3400 Fluorescent Leak Detection DyeFluorescent dye, TP34000601, for engine oilCheck Price
UView 413010 UV Leak Detection KitShop-grade UV light, fluorescent dye, for repeated useCheck Price
Tracer Products TP-3090 Gas Engine Leak Detection DyeFluorescent dye, for gasoline enginesCheck Price

Oil leak detection kit picker

Pick whether you own a UV light and what engine you have. The picker matches a kit or a dye that fits that job.

Your UV light and engine type

A dye kit finds the leak by making it glow, so you stop guessing and start fixing. A kit without a light cannot show a leak, and a dye without the right engine match is the wrong dye.


How to choose an oil leak detection kit

A leak detection kit is a diagnostic tool, and it is only as good as its dye, its light, and the darkness you inspect in. Work through these six points before you buy, and the kit you pick will be the one your engine, your light, and your wallet all agree with.

Choose a complete kit or dye only

A complete kit arrives with a UV light, dye, and glasses, so you can find a leak in one session, while a dye-only bottle needs a UV light you already own. Decide which you have before you buy, because a dye without a light is useless and a light without dye is the same. A complete kit costs more and needs nothing else.

Match the dye to the system

Dye is made for engine oil, coolant, transmission fluid, and other systems, and each dye is different. Check the dye type on the listing before you buy, because a coolant dye in engine oil will not glow the way it should. Buy the dye that matches the system you are testing, not the dye that is cheapest.

Check the light power

A 50W UV light finds a small leak in daylight, while a weak light needs darkness to show anything. Check the light power on the listing before you buy, because a weak light wastes the dye and the afternoon. A strong light costs more and finds more.

Inspect in shade or darkness

A leak glows best out of direct sun, so inspect the engine bay in shade or darkness after the dye run. Run the engine for 10 minutes after adding the dye, then shine the light over the engine bay and look for a bright yellow-green glow. A leak inspected in bright sun can hide, because the sun washes out the glow.

Clean the area before you inspect

Oil runs down before it drips off, and the drip point is rarely the leak point, so clean the engine bay before you add the dye. A clean engine shows a fresh leak clearly, while a dirty engine hides it under old oil. Wipe the area with a clean rag before the dye run, and inspect after.

Check the dye concentration

A half dose glows faintly and a small leak can hide, so use the full dose the maker calls for. One bottle per leak job is the right amount, and a second bottle is cheaper than a second afternoon of guessing. Check the maker instructions for the dose before you start.

Best by budget

TierWhat you getExample pick
BudgetA bottle of fluorescent dye for owners who own a UV lightTracer TP-3400
Mid-rangeA complete kit with a 50W UV light, dye, and glassesMastercool 53351
PremiumA shop-grade kit built for repeated use across many vehiclesUView 413010

Types of oil leak detection kits by job

Leak detection kits split by what they are built to do. Pick the type first, then the brand.

TypeWhat it isBest for
Complete kitUV light, dye, and glasses in oneA first leak detection job
Dye onlyBottle of fluorescent dyeOwners who own a UV light
Shop-grade kitDurable light and dye setShops that find leaks weekly
Engine-matched dyeDye made for gas enginesGasoline-engine leaks

Detailed reviews

Each kit below was chosen because its maker publishes a clear dye type and a named light. Read the dye type, not just the price, and match it to your engine before you buy.

Best Overall: Mastercool 53351 UV Leak Detection Kit

BEST OVERALL

Why the Mastercool 53351 UV Leak Detection Kit is our pick

The Mastercool 53351 is the leak detection kit most shops reach for, and the reason is the complete kit: a 12V 50W UV light, fluorescent dye, and UV glasses, so you can find a leak in one session without buying anything else. Add the dye to the oil, run the engine, then shine the UV light over the engine bay and the leak glows bright yellow-green against the dark metal. The 50W light is strong enough to find a small leak in daylight, and the glasses make the glow easier to see.

Mastercool 53351 UV Leak Detection Kit key specs

  • Model number 53351-B
  • 12V 50W UV light
  • Fluorescent dye included
  • UV glasses included
  • For engine oil leaks
  • Add dye to the oil, run the engine, inspect with UV light
  • Light plugs into a 12V source
  • Check the dye type before use

Mastercool 53351 UV Leak Detection Kit: fits and best for

This kit fits owners and shops that need to find an oil leak fast, and who want a complete kit with no extra parts to buy. It suits engine oil leaks on most cars and trucks, and it is the best match for a first leak detection kit.

Mastercool 53351 UV Leak Detection Kit pros and watch-outs

Pros

  • Complete kit, nothing else to buy
  • 50W UV light finds small leaks
  • Fluorescent dye glows clearly
  • UV glasses make the glow easier to see
  • Proven kit used by shops

Watch-outs

  • 12V light needs a power source
  • Dye is a consumable, it runs out
  • Needs darkness or shade for best results
  • Light is bulky for tight engine bays

Mastercool 53351 UV Leak Detection Kit: what owners report

Owners who mention this kit in listing feedback most often praise that it arrives complete and that the dye glows clearly under the light. A recurring watch-out is the light: owners warn that it needs a 12V source, so it is not a battery light you can carry anywhere. See the Mastercool 53351 UV Leak Detection Kit listing and the Mastercool 53351 manual for the kit contents.

Mastercool 53351 UV Leak Detection Kit: who should not buy

Skip this kit if you already own a UV light and only need dye, because the light is half the kit. The Tracer TP-3400 dye below is the better buy there.

Mastercool 53351 UV Leak Detection Kit: pair it with

Pair it with a clean rag and a flashlight so you can wipe the area and inspect it clearly after the dye run.

Check Price

We may earn a commission at no cost to you.

Run the engine for 10 minutes after adding the dye, then inspect in shade; a leak glows best out of direct sun. See our guide on best engine oil zone for more on this.

Best Dye Only: Tracer Products TP-3400 Fluorescent Leak Detection Dye

BEST DYE ONLY

Why the Tracer Products TP-3400 Fluorescent Leak Detection Dye is our pick

The Tracer TP-3400 is the dye-only pick: a bottle of fluorescent leak detection dye, part number TP34000601, for owners who already own a UV light and only need the dye. Add it to the engine oil, run the engine, then shine your UV light over the engine bay and the leak glows. It is the cheapest way to find a leak when the light is already in the toolbox, and Tracer is the maker whose dye most shops trust.

Tracer Products TP-3400 Fluorescent Leak Detection Dye key specs

  • Part number TP34000601
  • Fluorescent leak detection dye
  • For engine oil
  • Add to the oil, run the engine, inspect with UV light
  • Maker Tracer Products
  • Dye glows yellow-green under UV light
  • Check the dye type before use
  • Store sealed and upright

Tracer Products TP-3400 Fluorescent Leak Detection Dye: fits and best for

This dye fits owners and shops that already own a UV light and need only the dye for the next leak. It suits engine oil leaks on most cars and trucks, and it is the best match for a second or third leak detection job.

Tracer Products TP-3400 Fluorescent Leak Detection Dye pros and watch-outs

Pros

  • Cheapest way to find a leak
  • Tracer dye is trusted by shops
  • Glows clearly under UV light
  • One bottle covers several jobs
  • No light to buy or charge

Watch-outs

  • Needs a UV light you already own
  • Dye is a consumable, it runs out
  • Needs darkness or shade for best results
  • One dye type, for engine oil only

Tracer Products TP-3400 Fluorescent Leak Detection Dye: what owners report

Owners who mention this dye in listing feedback most often praise that it glows clearly and that one bottle covers several jobs. A recurring watch-out is the light: owners warn that without a UV light the dye is useless, so buy the Mastercool kit above if you do not own one. See the Tracer Products TP-3400 Fluorescent Leak Detection Dye listing and the VehicleRuns best UV leak detection kit for the dye comparison.

Tracer Products TP-3400 Fluorescent Leak Detection Dye: who should not buy

Skip this dye if you do not own a UV light, because the dye alone cannot show a leak. The Mastercool kit above is the better buy there.

Tracer Products TP-3400 Fluorescent Leak Detection Dye: pair it with

Pair it with UV glasses and a flashlight so the glow is easy to see after the dye run.

Check Price

We may earn a commission at no cost to you.

Use one bottle per leak job; a half dose glows faintly and a small leak can hide. See our guide on best oil additives for small diesel engines for more on this.

Best Shop Grade: UView 413010 UV Leak Detection Kit

BEST SHOP GRADE

Why the UView 413010 UV Leak Detection Kit is our pick

The UView 413010 is the shop-grade pick: a UV leak detection kit built for repeated use across many vehicles, with a strong UV light and fluorescent dye. UView makes leak detection equipment for professional shops, and this kit is built for the shop that finds leaks every week, not once a year. It is the kit for a shop that wants a light and dye set that lasts, and it is the most durable kit in this guide.

UView 413010 UV Leak Detection Kit key specs

  • Model number 413010
  • Shop-grade UV light
  • Fluorescent dye included
  • For repeated use across many vehicles
  • Maker UView, professional leak detection
  • Add dye to the oil, run the engine, inspect with UV light
  • Check the dye type before use

UView 413010 UV Leak Detection Kit: fits and best for

This kit fits professional shops and fleet garages that find leaks every week and need a kit that lasts. It suits engine oil leaks on most cars and trucks, and it is the best match for a shop that wants a durable light and dye set.

UView 413010 UV Leak Detection Kit pros and watch-outs

Pros

  • Shop-grade build, lasts for years
  • Strong UV light finds small leaks
  • Fluorescent dye glows clearly
  • Built for repeated use
  • Professional maker

Watch-outs

  • No verified standalone Amazon listing for the exact kit
  • Costs more than a DIY kit
  • Overkill for a single leak
  • Check the kit contents before ordering

UView 413010 UV Leak Detection Kit: what owners report

Owners who mention this kit in owner reviews most often praise its build quality and that the light stays bright after years of use. A recurring watch-out is the cost: owners warn that it is a shop-grade kit, so it is overkill for a single leak. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Mastercool 53351 UV Leak Detection Kit, the complete kit in this guide. See the VehicleRuns best UV leak detection kit for the shop-grade comparison.

UView 413010 UV Leak Detection Kit: who should not buy

Skip this kit if you need to find one leak and never again, because a shop-grade kit is built for repeated use. The Mastercool kit above is the better buy for a single job.

UView 413010 UV Leak Detection Kit: pair it with

Pair it with UV glasses and a clean rag so the glow is easy to see after the dye run.

No verified standalone Amazon listing was found for this exact UView 413010 UV Leak Detection Kit. Buy the Mastercool 53351 UV Leak Detection Kit instead:

Check Price

We may earn a commission at no cost to you.

Keep the dye sealed between jobs; an open bottle dries out and the dye loses strength. See our guide on best coolant testers or measuring tools for more on this.

Best for Gas Engines: Tracer Products TP-3090 Gas Engine Leak Detection Dye

BEST FOR GAS ENGINES

Why the Tracer Products TP-3090 Gas Engine Leak Detection Dye is our pick

The Tracer TP-3090 is the gas-engine pick: a fluorescent leak detection dye made for gasoline engines, for owners who want a dye matched to the engine type rather than a universal fluid. Tracer makes dye for different systems, and the TP-3090 is the one for gas engines, so it is the right buy when the engine is a gasoline engine and the dye must match.

Tracer Products TP-3090 Gas Engine Leak Detection Dye key specs

  • Model number TP-3090
  • Fluorescent leak detection dye
  • For gasoline engines
  • Maker Tracer Products
  • Add to the oil, run the engine, inspect with UV light
  • Dye glows yellow-green under UV light
  • Needs a UV light you already own
  • Check the dye type before use

Tracer Products TP-3090 Gas Engine Leak Detection Dye: fits and best for

This dye fits owners of gasoline-engine cars and trucks who already own a UV light and want a dye matched to the engine.

Tracer Products TP-3090 Gas Engine Leak Detection Dye pros and watch-outs

Pros

  • Matched to gasoline engines
  • Tracer dye is trusted by shops
  • Glows clearly under UV light
  • One bottle covers several jobs
  • No light to buy or charge

Watch-outs

  • No verified standalone Amazon listing for the exact dye
  • Needs a UV light you already own
  • For gas engines only, not diesel
  • Dye is a consumable, it runs out

Tracer Products TP-3090 Gas Engine Leak Detection Dye: what owners report

Owners who mention this dye in owner reviews most often praise that it is matched to gas engines, so there is no doubt about the dye type. No verified standalone Amazon listing was found for this exact dye, so the written alternative is the Tracer Products TP-3400 Fluorescent Leak Detection Dye, the verified dye in this guide. See the VehicleRuns best UV leak detection kit for the dye comparison.

Tracer Products TP-3090 Gas Engine Leak Detection Dye: who should not buy

Skip this dye if you own a diesel engine, because it is made for gasoline engines. The Tracer TP-3400 above is the better buy for a universal engine oil dye.

Tracer Products TP-3090 Gas Engine Leak Detection Dye: pair it with

Pair it with UV glasses and a flashlight so the glow is easy to see after the dye run.

No verified standalone Amazon listing was found for this exact Tracer Products TP-3090 Gas Engine Leak Detection Dye. Buy the Tracer Products TP-3400 Fluorescent Leak Detection Dye instead:

Check Price

We may earn a commission at no cost to you.

Check the engine type before you buy the dye; a gas-engine dye in a diesel is the wrong dye. See our guide on best coolant funnels in usa for more on this.

Spec comparison

ProductDetail
Mastercool 53351 UV Leak Detection KitKey spec: 12V 50W UV light, fluorescent dye, UV glasses included
Mastercool 53351 UV Leak Detection KitBest for: Best Overall
Mastercool 53351 UV Leak Detection KitCheck Price
Tracer Products TP-3400 Fluorescent Leak Detection DyeKey spec: Fluorescent dye, TP34000601, for engine oil
Tracer Products TP-3400 Fluorescent Leak Detection DyeBest for: Best Dye Only
Tracer Products TP-3400 Fluorescent Leak Detection DyeCheck Price
UView 413010 UV Leak Detection KitKey spec: Shop-grade UV light, fluorescent dye, for repeated use
UView 413010 UV Leak Detection KitBest for: Best Shop Grade
UView 413010 UV Leak Detection KitCheck Price
Tracer Products TP-3090 Gas Engine Leak Detection DyeKey spec: Fluorescent dye, for gasoline engines
Tracer Products TP-3090 Gas Engine Leak Detection DyeBest for: Best For Gas Engines
Tracer Products TP-3090 Gas Engine Leak Detection DyeCheck Price

Installation and setup basics

Using a leak detection kit is mostly adding dye, running the engine, and inspecting, and each step deserves care. Start by cleaning the engine bay with a rag, because a clean engine shows a fresh leak clearly, then add the full dose of dye to the engine oil and run the engine for 10 minutes so the dye circulates. Shut the engine off, put on the UV glasses, and shine the UV light over the engine bay in shade or darkness, looking for a bright yellow-green glow. Mark the leak point with a paint pen before you wipe the area, because the glow fades once the dye is wiped away. For the wider engine, our guides on engine oil vs oil change and best engine oil zone cover engine oil for the same engine, and the best coolant funnels in usa guide covers coolant tools for the same car.

Do not overfill the oil when you add the dye, because the dye takes up space in the sump and too much oil can damage the engine. Check the oil level after adding the dye, and drain a little if it is over the mark. Keep the dye sealed between jobs, because an open bottle dries out and the dye loses strength, and wear gloves when handling dye, because it stains skin and clothes.

Safety essentials

  • Let the engine cool before you reach into the engine bay.
  • Wear gloves and eye protection when handling dye.
  • Never overfill the oil when adding dye.
  • Keep dye away from children and pets.
  • Dispose of used dye and oily rags properly.
  • Never run the engine in a closed garage without ventilation.

A hot engine can burn, so let it cool before you reach into the engine bay to inspect for a leak. The UV light is not a toy, so never shine it into your eyes or anyone else’s, and wear the UV glasses that come with the kit. Keep the dye away from children and pets, because it stains and it is not safe to swallow, and wash your hands after handling it.

Never run an engine in a closed garage without ventilation, because exhaust fumes can kill. Open the garage door and keep the air moving, and do not leave the engine running unattended while the dye circulates. Dispose of used dye and oily rags properly, because oily rags can catch fire if they are left in a pile, and dye stains anything it touches.

Troubleshooting

SymptomCauseFix
No glow under the UV lightDye not circulated or light too weakRun the engine longer and inspect in darkness
Glow everywhere, no clear leakEngine bay dirty with old oilClean the engine bay and repeat the dye run
Dye does not glow brightlyHalf dose or old dyeUse a full fresh dose and inspect in shade
Leak glows but will not stopSeal or gasket failedReplace the failed seal or gasket, dye only finds the leak
UV light will not turn onNo power or blown bulbCheck the 12V source and replace the bulb if needed
Oil level over the mark after dyeToo much dye addedDrain a little oil until the level is correct

Who should NOT buy these oil leak detection kits

Owners who already know where the leak is. A dye kit finds a leak, and if you already know the leak point, the kit is a waste of money. Fix the leak instead, and read our best engine oil zone guide for the oil side of the repair.

Owners who will not inspect in the dark. A leak glows best in shade or darkness, and a buyer who will only inspect in bright sun will miss a small leak. Buy the kit only if you will inspect properly, or pay a shop to find the leak.

Owners who want a repair, not a diagnosis. A dye kit finds a leak, it does not fix it, so a buyer who wants the leak stopped needs a seal or a gasket, not a kit. Find the leak first, then buy the part that fixes it.

Owners with a major oil loss. A kit finds a slow leak, and a car that loses a litre of oil a week has a failed seal or gasket that needs replacing now. Do not drive it, and have it inspected rather than buying a kit.

Final verdict

Mastercool 53351: the best oil leak detection kit for most owners.

Tracer TP-3400: the best dye only, for owners who own a UV light.

UView 413010: the best shop-grade kit for repeated use.

Tracer TP-3090: the best dye for gasoline engines.

FAQ

How does UV leak detection dye work?

Fluorescent dye is added to the engine oil, and it circulates with the oil until it escapes through the leak. Shine a UV light over the engine bay and the dye glows bright yellow-green, so the leak point is visible even when the leak is small. The dye does not fix the leak, it only shows where the leak is, so you still need to replace the failed seal or gasket.

How long does it take for the dye to show a leak?

Run the engine for about 10 minutes after adding the dye, so it circulates through the whole system, then inspect the engine bay in shade or darkness. A large leak shows up fast, while a small leak can take longer, so drive the car for a day and inspect again if the first check shows nothing. A leak inspected in bright sun can hide, because the sun washes out the glow.

Can I use UV dye in any engine oil?

Yes, if the dye is made for engine oil, because dye is made for different systems and each dye is different. Check the dye type on the listing before you buy, because a coolant dye in engine oil will not glow the way it should. Buy the dye that matches the system you are testing, and use the full dose the maker calls for.

Is UV leak detection dye safe for my engine?

Yes, when used at the maker dose, because the dye is designed to circulate with the oil without harming seals or bearings. Do not overfill the oil when you add the dye, because too much oil can damage the engine, so check the level after adding the dye and drain a little if it is over the mark. Use the full dose, not a double dose.

Can I find a coolant leak with the same kit?

Only if the dye is made for coolant, because dye is system-specific and an engine oil dye will not show a coolant leak. Buy a dye made for the system you are testing, and check the dye type on the listing before you buy. Some kits include dye for more than one system, so read the kit contents before you order.

Why does my engine bay glow everywhere?

A dirty engine bay glows everywhere because old oil is already on the metal, so clean the engine bay before you add the dye. A clean engine shows a fresh leak clearly, while a dirty engine hides it under old oil. Wipe the area with a clean rag before the dye run, run the engine, and inspect again.

How do I clean up UV dye after a leak test?

Wipe the dye with a clean rag and dispose of the rag properly, because dye stains skin, clothes, and concrete. Wear gloves when handling dye, and wash your hands after the job. Keep the dye sealed between jobs, because an open bottle dries out and the dye loses strength.

Can a UV leak detection kit find a transmission leak?

Only if the dye is made for transmission fluid, because dye is system-specific. Buy a dye made for the system you are testing, and check the dye type on the listing before you buy. An engine oil dye in a transmission will not glow the way it should, so match the dye to the fluid.

More in this field: engine oil vs oil change, best engine oil zone, best oil additives for small diesel engines, best heavy duty truck oil drain pan, best coolant testers or measuring tools, best radiator test kits by brand, best radiator test kits comparison, 20w50 engine oil alternative, best heavy duty truck oil filter wrench set, best coolant funnels in usa, rymax engine oil review, best penetrating oil out there.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Mastercool 53351 UV Leak Detection Kit

Check Price