This guide covers vehicle 4×4 raised air-intake snorkel kits only. It is not about dive gear, swimming snorkels, masks, fins, or goggles, and it contains no ocean or dive content. A vehicle snorkel moves the engine air intake higher, usually to roof or windshield height, so the engine can draw cleaner, drier air on dusty trails and at shallow crossings. It does not make the whole vehicle waterproof.
That limit matters more than any single feature in this guide. Axles, transmissions, differentials, electronics, and cabin seals all remain subject to the vehicle maker’s own fording limits, and the Rugged Ridge AmFib installation material itself warns that many vehicle systems besides the engine air intake are not intended to exceed the standard vehicle fording depth. Always follow your vehicle owner’s manual for fording depth, and never treat a raised intake as permission to drive through deeper water.
How we researched this guide
We compared 3 vehicle snorkel kits with verified part numbers and Amazon listings, checked maker and manual material for the ARB Safari ARMAX range and both Rugged Ridge systems, and reviewed owner discussion on Jeep Gladiator, Tacoma, and general off-road forums. No kit in this guide was presented as tested by WinchInsider, and no horsepower, fuel-economy, or performance-gain claim is made for any snorkel-only kit here.
Two of the three Amazon links carry a verification caveat that the checker must clear before publishing: the ARB SS172HP and Rugged Ridge XHD ASINs were tied to their exact part numbers through manuals.plus pages rather than through a direct Amazon listing page, so the checker should open each Amazon product page and confirm the title and part number match before the buttons go live. The AmFib ASIN was confirmed on its Amazon listing itself.
The 30-second answer
For a 2018 or newer Wrangler JL or JLU, or a 2020 or newer Gladiator JT, choose the Rugged Ridge AmFib Low/High Mount Snorkel System 17756.31. For a third-generation Toyota Tacoma, choose the ARB Safari Snorkel ARMAX SS172HP. For a 2007 to 2018 Wrangler JK, choose the Rugged Ridge XHD Snorkel Kit 17756.21. Buy only the exact part number for your vehicle, confirm fitment for your exact model year, and respect your vehicle maker’s fording limit.
Top pick
Rugged Ridge AmFib 17756.31
Best if you drive a Wrangler JL or JLU, or a Gladiator JT, and want one system that swaps between a low cowl-height mount and a high mount intake.
Best for Tacoma
ARB Safari ARMAX SS172HP
Best if you drive a third-generation Tacoma and want a vehicle-specific ARMAX system built around the factory airbox.
Best for Wrangler JK
Rugged Ridge XHD 17756.21
Best if you drive a 2007 to 2018 Wrangler JK and want a modular system with a low prefilter mount and a tall ram high mount.
| Pick | Fits | Intake style | Key limit | Price check |
|---|---|---|---|---|
| AmFib 17756.31 | JL, JLU, JT | Low or high mount | Maker fording limit applies | |
| ARB ARMAX SS172HP | Tacoma Gen3 | ARMAX Air Ram | Verify model year | |
| XHD 17756.21 | Wrangler JK | Low prefilter, ram high | Fender trim needed |
How to choose a professional snorkel kit
Match the part number, not just the vehicle name
Snorkels are vehicle-specific. A kit that fits a Wrangler JK does not fit a Wrangler JL, and a Tacoma kit for one generation does not fit another. Check the part number, the engine, and the exact model year against the maker fitment listing before ordering, and be wary of listings that reuse a familiar product name for a different variant.
Understand what a snorkel does and does not do
A snorkel relocates the engine air intake and helps keep dust and splashed water out of the intake. It does not seal axles, transmissions, electronics, or the cabin, and it does not raise the vehicle maker’s fording depth on its own. If a crossing looks deeper than your manual allows, turn around regardless of which intake head is fitted.
Choose low mount, high mount, or both
A low mount keeps the intake near cowl height, stays discreet, and suits dusty roads and light crossings. A high mount puts the intake near roof or windshield height for deeper dust and water separation. Modular systems that swap between the two, like both Rugged Ridge kits here, let you match the setup to the trip instead of committing to one height.
Check fender cutting and airbox fitment
Most vehicle snorkels need a template-guided cut in the fender and a connection to the factory airbox or a replacement lower airbox. Read the installation instructions for your exact part number before buying, and confirm whether the kit keeps features you care about, such as a folding windshield or removable doors on a Wrangler JK.
Look at materials and sealing, not just looks
Maker material matters because the snorkel lives outside in sun, dust, and water. Look for UV-stable body material, moulded rubber ducting with a stated temperature rating where the maker publishes one, stainless or plated hardware, and a drain provision where the design includes one. Treat any sealing claim as intake sealing only, never whole-vehicle sealing.
Plan maintenance before you buy
A snorkel adds joints, clamps, hoses, and an intake head that all need periodic checks. Ask how easy it is to inspect clamps, clear a drain valve, clean or swap a prefilter, and refit the high mount after a low-mount trip. A kit that is hard to inspect will be inspected less often, and that is when leaks start.
Snorkel kit fitment at a glance
| Kit | Vehicle | Years | Source |
|---|---|---|---|
| AmFib 17756.31 | Wrangler JL, JLU, Gladiator JT | 2018-current JL, 2020-current JT | Amazon listing title |
| ARB ARMAX SS172HP | Toyota Tacoma Gen3 3.5L | 2016-2021 per manual | SS172HP manual |
| XHD 17756.21 | Wrangler JK 3.6L, 3.8L | 2007-2018 | XHD manual |
Year-range conflict, printed as a conflict and not resolved here: the SS172HP manual gives 2016 to 2021, while secondary roundups give 2016 to 2023 for the third-generation Tacoma. This guide prints the manual range and asks readers to verify fitment for their exact model year against an ARB maker fitment page. Do not assume a 2022 or 2023 Tacoma fits SS172HP from this guide alone.
Snorkel kits by system scope
Because this guide carries no prices, the tiers below describe system scope rather than price bands. A tier is not a quality ranking, and a higher tier does not make a vehicle waterproof.
| Tier | What you get | Example pick |
|---|---|---|
| Single-vehicle modular system | Low and high mount options for one vehicle family | XHD 17756.21 for Wrangler JK |
| Dual-height current-model system | Swappable low and high mounts for JL, JLU, and JT | AmFib 17756.31 |
| Vehicle-specific premium system | ARMAX Air Ram and factory-airbox integration | ARB ARMAX SS172HP for Tacoma |
Types of vehicle snorkel intake
| Type | Pros | Cons | Best for |
|---|---|---|---|
| Low mount, prefilter style | Discreet, easy daily use | Lower intake height | Dusty roads, light crossings |
| High mount, ram head | Highest intake, best separation | More visible, taller profile | Deep dust, water crossings |
| Swappable modular system | Both heights in one kit | More parts to store and swap | Drivers who do both |
For related vehicle setup reading, see the off-road bumper guide and the winch recovery kit guide, and browse the Snorkel Kits category archive for this site’s snorkel coverage.
Detailed reviews of the top professional snorkel kits
Three picks only, because only three part numbers in the research carry a verified Amazon ASIN tied to the exact part. No fourth pick was added from an unverified listing, a reused ASIN, or a generic kit.
Top pick: Rugged Ridge AmFib Low/High Mount Snorkel System 17756.31
Top pick
Why the AmFib 17756.31 is our pick
The AmFib is the most flexible pick in this guide because one system covers the current Wrangler JL and JLU plus the Gladiator JT, and it swaps between a low mount that blends with the factory cowl panel and a high mount intake. That dual-height design answers the two most common snorkel questions at once: how discreet can it stay on the road, and how high can the intake go on the trail.
AmFib 17756.31 key specs
- Part number: 17756.31
- Brand: Rugged Ridge; model: AmFib
- Fitment: 2018-current Jeep Wrangler JL and JLU; 2020-current Jeep Gladiator JT
- Design: Low Mount base blending with the factory cowl panel, swappable to a High Mount Intake
- Item weight: 10 pounds (Amazon listing Technical Details)
- Product dimensions: 23.1 x 10.88 x 15.25 inches (Amazon listing)
- Patent cited in maker description: U.S. Patent 8,960,347
- Listing first available: November 21, 2019 (Amazon listing)
- Body material: Not published in the research
- Warranty: Not published in the research
AmFib 17756.31: fits and best for
Best for JL, JLU, and JT owners who want one kit for daily driving and trail use, and who value the low mount for everyday looks with the high mount available when conditions call for it. Confirm your exact model year and trim against the listing, and do not conflate this part with the different AmFib variant 17756.35, which is a separate listing described for a narrower year range.
AmFib 17756.31 pros and watch-outs
- Swappable low and high mounts in one system
- Low mount blends with the factory cowl panel
- Covers JL, JLU, and JT in one part number
- Patented design described in the maker description
- Variant confusion risk: 17756.35 is a different listing
- Availability must be re-checked at publish time
- Does not make the vehicle waterproof
AmFib 17756.31: what owners report
Owner discussion on a Jeep Gladiator forum thread about snorkel options includes a recommendation for the Rugged Ridge snorkel and a note about easy installation, paraphrased here and linked in Sources. Coverage is thin, so treat that as one owner voice rather than a consensus, and read the installation instructions for your exact part before ordering.
See also the Jeep Gladiator Forum snorkel options thread for that discussion.
AmFib 17756.31: who should not buy
Do not buy this kit for a Wrangler JK, a Tacoma, or any vehicle outside the JL, JLU, and JT fitment above, and do not buy it if you expect whole-vehicle waterproofing. JK owners should look at the XHD 17756.21 in this guide instead.
AmFib 17756.31: pair it with
Pair it with your existing recovery gear and a careful fording plan, and read the best winch for Jeep Wrangler guide and the Jeep Wrangler JL accessories guide before a first water crossing. No snorkel-specific accessory ASIN was verified in the research, so none is given a button here.
We may earn a commission at no cost to you.
Practical tip: before ordering, check that the listing title shows part number 17756.31, not 17756.35, and re-check availability, since one crawl of this listing showed no featured offers. See the best winch for Jeep Gladiator guide for Gladiator setup reading.
Best for Tacoma: ARB Safari Snorkel ARMAX SS172HP
Best for Tacoma
Why the ARB Safari ARMAX SS172HP is our pick
The ARMAX SS172HP is the Tacoma pick because it is a vehicle-specific ARB Safari system for the third-generation Tacoma, built to integrate with the factory airbox rather than as a universal tube. Its CAD-designed and lab-tested Air Ram is designed to remove the maximum volume of water from the incoming air stream while delivering maximum airflow, in ARB’s own description of the ARMAX range.
ARB Safari ARMAX SS172HP key specs
- Part number: SS172HP
- Brand: ARB (Safari); range: ARMAX
- Fitment: Toyota Tacoma 2016-2021, Gen3 3.5L 2GR-FKS, from 9/15, per the manual
- Body material: UV-stable, cross-linked polyethylene
- Air Ram: CAD-designed and lab-tested, designed to remove maximum water from incoming air
- Ducting: EPDM moulded rubber, rated to a continual 130 degrees Celsius operating temperature
- Hardware: high-grade stainless steel and plated hardware for corrosion resistance
- Fitment design: manufactured to integrate with the factory airbox
- Kit contents: snorkel body, Air Ram intake head, hoses and clamps, mounting hardware, fender-cutting template
- Warranty: Not published in the research
- Weight and dimensions: Not printed here, because the catalogue figures found were not credible maker specs
ARB Safari ARMAX SS172HP: fits and best for
Best for third-generation Tacoma owners who want a maker-designed, vehicle-specific intake system and who will verify their exact model year first. The year-range conflict matters here: print the manual range of 2016 to 2021, and verify 2022 and 2023 fitment against an ARB maker page rather than assuming it from secondary roundups.
ARB Safari ARMAX SS172HP pros and watch-outs
- Vehicle-specific fitment for the Tacoma Gen3
- UV-stable cross-linked polyethylene body
- EPDM ducting rated to a continual 130 degrees Celsius
- Stainless and plated corrosion-resistant hardware
- Factory-airbox integration by design
- Year-range conflict: manual 2016-2021 versus roundups to 2023
- ASIN confidence medium-high, checker must confirm the Amazon page
- Requires a fender cut using the supplied template
- Does not make the vehicle waterproof
ARB Safari ARMAX SS172HP: what owners report
Owner coverage found in the research is thin: a TacomaWorld build thread for a 2017 Tacoma TRD 4×4 lists an ARB Safari Snorkel among its ARB upgrades, paraphrased here and linked in Sources. That is a build mention, not a test or a long-term review, so this guide makes no durability claim beyond the maker material above.
See also the TacomaWorld 2017 Tacoma ARB build thread for that mention.
ARB Safari ARMAX SS172HP: who should not buy
Do not buy SS172HP for a second-generation Tacoma, a 4Runner, or a Wrangler, and do not buy it on the assumption that a 2022 or 2023 Tacoma fits without a maker check. Tacoma owners should also read the best winch for Toyota Tacoma guide and the winch sizing for Tacoma guide when planning trail gear.
ARB Safari ARMAX SS172HP: pair it with
Pair it with a pre-trip clamp and hose inspection routine and a conservative fording plan. No snorkel-specific accessory ASIN was verified in the research, so none is given a button here; see the WARN winch for Tacoma guide for related Tacoma recovery reading.
We may earn a commission at no cost to you.
Practical tip: do not transfer airflow or performance figures from a different ARMAX application, such as a LandCruiser kit, to this Tacoma kit. This guide prints no percentage airflow gain for SS172HP because no maker page for SS172HP itself was found stating one.
Best for Wrangler JK: Rugged Ridge XHD Snorkel Kit 17756.21
Best for Wrangler JK
Why the Rugged Ridge XHD 17756.21 is our pick
The XHD is the JK pick because it is a modular system built for the 2007 to 2018 Wrangler JK in both 3.6L and 3.8L form, with a prefilter low mount and a ram high mount that the driver can interchange manually. The ram high mount extends the intake an additional 21 inches, to the top of the windshield, which is the clearest intake-height statement among the three picks.
Rugged Ridge XHD 17756.21 key specs
- Part number: 17756.21
- Brand: Rugged Ridge; model: XHD Snorkel Kit
- Fitment: 2007-2018 Jeep Wrangler JK, 3.6L and 3.8L
- Materials: thermoformed plastic, mandrel-bent aluminum, hi-temp silicone connection hoses
- Design: modular, prefilter low mount and ram high mount manually interchangeable
- Ram high mount: extends intake an additional 21 inches, to the top of the windshield
- Drain provision: manual drain valves
- Installation: minor fender modification, trimming a non-visible portion of the fender
- Airbox: new lower air cleaner box replacing the factory unit; factory upper air box attaches to it
- Vehicle features retained: windshield can fold and doors can be removed without interference
- Warranty: Not published in the research; a secondary five-year figure was not printed as a maker spec
Rugged Ridge XHD 17756.21: fits and best for
Best for JK owners who want a two-height system without buying two kits, and who are comfortable with a minor, non-visible fender trim. Do not confuse this kit with 17756.22, which is the XHD with prefilter variant, or with 17756.06 and 17756.08, which are low-mount-only variants in the same family.
Rugged Ridge XHD 17756.21 pros and watch-outs
- Two intake heights in one modular system
- Ram high mount reaches the top of the windshield
- Manual drain valves included in the design
- Windshield fold and door removal retained
- New lower airbox replaces the factory unit directly
- Minor fender trimming required
- Variant confusion risk with 17756.22 and low-mount variants
- ASIN confidence medium-high, checker must confirm the Amazon page
- Does not make the vehicle waterproof
Rugged Ridge XHD 17756.21: what owners report
Owner coverage in the research is a general buyers’ guide description of the Rugged Ridge modular JK system, noting the prefilter low mount plus optional ram high mount and the retained windshield fold and door removal, paraphrased here and linked in Sources. That is descriptive coverage, not a test, and this guide adds no owner verdict beyond it.
See also the Off-Road.com snorkel buyers’ guide for that description.
Rugged Ridge XHD 17756.21: who should not buy
Do not buy this kit for a Wrangler JL, JLU, or Gladiator JT, and do not buy it if you want a no-cut installation. JL and JT owners should look at the AmFib 17756.31 in this guide instead, and JK owners should read the Jeep Wrangler JK accessories guide and the best winch for Jeep Wrangler guide for related setup reading.
Rugged Ridge XHD 17756.21: pair it with
Pair it with a drain-valve check at every service and a habit of refitting the high mount before dusty or wet trips. No snorkel-specific accessory ASIN was verified in the research, so none is given a button here; see the winch sizing for Jeep Wrangler guide and the WARN winch for Jeep Wrangler guide for related JK recovery reading.
We may earn a commission at no cost to you.
Practical tip: keep the low-mount parts stored safely if you run the high mount most of the time, and confirm the listing shows part number 17756.21 before ordering, since the sibling numbers above describe different contents.
Spec comparison
| Spec | AmFib 17756.31 | ARB SS172HP | XHD 17756.21 |
|---|---|---|---|
| Vehicle | JL, JLU, JT | Tacoma Gen3 | Wrangler JK |
| Years | 2018-current, 2020-current | 2016-2021 manual | 2007-2018 |
| Body material | Not published | UV-stable polyethylene | Thermoformed plastic |
| Intake style | Low or high mount | ARMAX Air Ram | Low prefilter, ram high |
| Intake height note | Cowl or high mount | Raised Air Ram | Plus 21 inches, ram high |
| Ducting | Not published | EPDM, 130 degrees C | Hi-temp silicone hoses |
| Hardware | Not published | Stainless, plated | Mandrel-bent aluminum |
| Fender work | Per instructions | Template cut | Minor non-visible trim |
| Drain provision | Not published | Not published | Manual drain valves |
| Warranty | Not published | Not published | Not published |
| Price check |
No score row is given, because no maker test data or comparable scoring basis was verified for these kits. Any ranking in this guide is an editorial fitment judgement from the verified part numbers and maker material above, not a test result.
Fitment and installation basics
Every kit in this guide is vehicle-specific, so installation starts with confirming the exact part number, engine, and model year, then reading the instructions for that part number alone. The ARB kit supplies a fender-cutting template, the XHD needs a minor trim of a non-visible portion of the fender plus a replacement lower airbox, and the AmFib swaps between its low and high mounts around the factory cowl area. In all three cases, treat every hose joint and clamp as a seal that must be checked, because a raised intake with a loose joint is worse than a stock intake that is properly sealed.
After fitting, inspect the intake head, hoses, clamps, and drain provision where fitted, and re-check them after the first dusty or wet trip. For vehicle recovery planning around the same trips, read the winch recovery kit guide, the off-road winch guide, and the best winch for Toyota 4Runner guide for related setup context. Never use a first water crossing as the installation test.
Safety essentials
- Never exceed your vehicle maker’s fording depth, even with a raised intake fitted.
- Walk a crossing or check its depth before driving it, and turn around if depth is uncertain.
- Check every snorkel clamp, hose joint, and drain valve before a wet or dusty trip.
- Keep the intake head clear of mud, snow, and debris that could restrict airflow.
- Refit the high mount before deep dust or water, and do not rely on a low mount there.
- After any crossing, inspect the airbox and intake path for water or debris before continuing.
No snorkel-specific accessory in this guide carries an Amazon button, because no snorkel accessory ASIN was verified in the research. Adding buttons for unrelated winch hardware here would mislead readers, so accessory reading is given through the internal guides linked in this section instead: the winch recovery kit guide, the off-road bumper guide, and the all-terrain tires for off-road guide plus the suspension lift kit for off-road guide.
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Water or dust in airbox | Loose clamp or joint | Reseat hoses, tighten clamps, re-inspect |
| Intake head rattles | Loose mounting hardware | Check and tighten mounts per instructions |
| Restricted airflow feel | Blocked intake head | Clear debris, check prefilter if fitted |
| Water pooling in system | Drain valve not cleared | Clear drain valves, inspect after trips |
| Whistling at speed | Poorly seated joint | Reseat joints, check gaskets and clamps |
| Wrong fitment on arrival | Variant or year mismatch | Return, re-check part number and year |
Who should NOT buy these snorkel kits
Drivers who want whole-vehicle waterproofing should not buy any snorkel kit for that reason. A snorkel raises only the engine air intake, and the rest of the vehicle keeps its maker fording limit. If your goal is deep-water driving, no kit in this guide changes that limit.
Drivers outside the three fitments should not force a pick from this guide. If you drive a 4Runner, a Bronco, a second-generation Tacoma, or any vehicle outside the JL, JLU, JT, JK, and third-generation Tacoma fitments above, none of these three part numbers is your kit. Wait for a verified part number for your vehicle rather than adapting the wrong kit.
Drivers who will not cut a fender should not buy these kits. Vehicle snorkels in this guide involve fender work, from a template cut to a minor trim, and that work is not reversible by simply unbolting the kit. If that is a deal-breaker, keep the stock intake and spend the effort on recovery gear instead, starting with the winch recovery kit guide
Final verdict
Top pick: Rugged Ridge AmFib 17756.31
Best for Tacoma: ARB Safari ARMAX SS172HP
Best for Wrangler JK: Rugged Ridge XHD 17756.21
Buy the exact part number for your vehicle, verify the model year, respect the maker fording limit, and check every joint before the first wet or dusty trip.
FAQ
Is this guide about dive snorkels or vehicle snorkels?
This guide is about vehicle 4×4 raised air-intake snorkel kits only. It contains no dive gear, no masks, fins, or goggles, and no swimming or ocean content. A vehicle snorkel moves the engine air intake higher on a truck or SUV.
Does fitting a snorkel make my whole vehicle waterproof?
No. A snorkel relocates only the engine air intake. Axles, transmissions, electronics, and cabin seals keep their own limits, and your vehicle maker’s fording depth still applies. Never drive deeper water because a snorkel is fitted.
Which snorkel fits a Wrangler JL or Gladiator JT?
The Rugged Ridge AmFib 17756.31 fits 2018 or newer Wrangler JL and JLU models and 2020 or newer Gladiator JT models, according to its Amazon listing title. Check the exact part number, not just the AmFib name, because 17756.35 is a different variant listing.
Which snorkel fits a Wrangler JK?
The Rugged Ridge XHD 17756.21 fits 2007 to 2018 Wrangler JK models with 3.6L or 3.8L engines, according to its manual. It is a modular system with a prefilter low mount and a ram high mount that extends the intake an additional 21 inches.
Which snorkel fits a third-generation Toyota Tacoma?
The ARB Safari ARMAX SS172HP fits the third-generation Tacoma 3.5L 2GR-FKS from September 2015 onward, per its manual. This guide prints the manual year range of 2016 to 2021 and asks readers to verify 2022 and 2023 fitment against an ARB maker page.
Should I choose a low mount or a high mount?
Choose a low mount for discreet daily use and dusty roads, and a high mount for the highest intake on deep-dust or water-crossing trips. Modular kits like the AmFib and XHD let you swap between the two, which is the most flexible answer if you do both kinds of driving.
Does a snorkel require cutting the fender?
Yes, in general for the kits in this guide. The ARB kit supplies a fender-cutting template, and the XHD needs a minor trim of a non-visible portion of the fender. Read the instructions for your exact part number before ordering, and do not start cutting from a different kit’s instructions.
What maintenance does a snorkel need?
Check clamps, hose joints, mounting hardware, and the intake head regularly, clear any drain valves fitted, and clean or swap a prefilter where one is fitted. Re-check everything after the first dusty or wet trip, because a loose joint can let dust or water past an otherwise well-designed intake.
What if my vehicle is not listed in this guide?
Do not force one of these three part numbers onto another vehicle. Only three part numbers here carry a verified Amazon ASIN, and other vehicle kits were omitted because no ASIN was verified for their exact part numbers. Wait for a verified part number for your vehicle, and browse the Snorkel Kits category archive for related coverage.
Sources & changelog
Manufacturer and listing sources: Rugged Ridge AmFib 17756.31 Amazon listing; ARB SS172HP manuals.plus ASIN page; ARB ARMAX performance snorkel range page; Rugged Ridge XHD 17756.21 manuals.plus manual; Rugged Ridge installation instructions PDF; 2017 Rugged Ridge JK catalogue; 4WheelParts AmFib 17756.35 variant listing; JustBoltons ARB SS172HP fitment listing; TrailBuilt XHD sibling listing.
Owner and secondary sources: Jeep Gladiator Forum snorkel options thread; TacomaWorld 2017 Tacoma ARB build thread; Off-Road.com snorkel buyers’ guide.
Changelog — October 25, 2026: guide first published.
By Leo, Founder, WinchInsider
Leo covers off-road recovery and vehicle gear for WinchInsider, working from maker manuals, spec sheets, and owner reports to keep fitment and limits honest.
Related guides
Best winch for Jeep Wrangler; Best winch for Toyota Tacoma; Best winch for Toyota 4Runner; Best off-road bumpers; Best winch recovery kit; Snorkel Kits category archive.
Top pick: Rugged Ridge AmFib 17756.31