Top Best Jack Stands for Suvs

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

The 30-second answer is below, followed by how this guide was researched, so you can check the shortlist before the detail.

The 30-second answer

For most SUVs, choose a 6-ton pair with a tall height range and a double-locking or pin-secured design: the Torin BIG RED T46002A is the top pick, the Torin AT46002R suits taller SUVs, the TCE 6-ton set is the value 6-ton option, and the Torin aluminum 3-ton set is only for smaller, lighter SUVs that fit its height range.

How we researched this guide

This guide compared 4 jack stand sets, checked maker manuals and specification pages, and reviewed owner reports about height, stability, and locking mechanisms.

Capacity figures below are rated per pair unless the listing states otherwise, and height ranges are taken from the maker or listing specifications. Never work under a vehicle supported only by a jack.

Best Overall

Torin BIG RED T46002A Steel Jack Stands, 6 Ton

Best if you want a tall, double-locking 6-ton pair that covers most SUVs with margin. The height range suits higher SUVs better than short car stands.

Check Price

Best for Tall SUVs

Torin BIG RED AT46002R Steel Jack Stands, 6 Ton

Best if your SUV is tall or lifted and you need maximum height with a 6-ton rating. The top height reaches higher than most car stands.

Check Price

Best Value 6-Ton

TCE 6 Ton Double Locking Steel Jack Stands AT46002AU

Best if you want 6-ton capacity and double locking without paying for the top pick. The height range matches the other 6-ton sets here.

Check Price

Best Lightweight

Torin BIG RED AT43004BR Aluminum Jack Stands, 3 Ton

Best if you want a lighter pair to carry and your SUV is smaller and lighter, with a height range that fits. Not for full-size SUVs.

Check Price

Product Rated capacity Height range Locking Warranty Check Price
Torin T46002A 6 ton per pair 15-3/8 to 23-13/16 in Double locking Limited 1 year

Check Price

Torin AT46002R 6 ton per pair Up to 23.81 in Ratchet Not published

Check Price

TCE AT46002AU 6 ton per pair 15-3/8 to 23-13/16 in Double locking Not published

Check Price

Torin AT43004BR 3 ton per pair Up to 15.63 in Ratchet plus pins Not published

Check Price

SUV jack stand finder

Enter your SUV weight and choose lb or kg. The finder recommends a stand pair from this article only, and never recommends a stand below this article’s floor for SUVs.

Enter a value and press Enter or Find my pick.

How to choose jack stands for an SUV

Rated capacity per pair

Start with the pair rating, not a single stand. SUV curb weights vary widely, and a pair rating gives the margin you need when only one end of the vehicle is raised. A 6-ton pair covers most SUVs with room to spare, while a 3-ton pair is only sensible for smaller SUVs.

Height range and SUV ground clearance

SUVs sit higher than cars, so minimum height matters as much as maximum height. Measure from level ground to your frame or axle lift point and confirm the stand reaches that height without sitting at its very top notch.

Locking design

A ratchet pawl alone is the minimum. Double-locking designs add a pin or second lock, which guards against accidental release. Check that the pin or lock is easy to insert with gloves on before you buy.

Saddle and base shape

A wide saddle spreads load on the frame or axle point, and a wide pyramid base resists tipping on a garage floor. Avoid stands whose saddle does not sit flat on your chosen lift point.

Lift point compatibility

Always use the lift points in your vehicle manual. Stands belong under the frame or axle, never under suspension arms, body panels, or a floor pan. If the manual point is not reachable, stop and get advice.

Floor, jack, and chocks

Stands need a hard, level floor, a jack that lifts high enough, and wheel chocks on the wheels staying on the ground. Soft ground, slopes, and driveway gravel are not safe working surfaces.

Jack stands for SUVs by budget

Tier What you get Example pick
Value A simple ratchet pair with a solid base and a clear pair rating TCE 6-ton set
Mid-range Double locking and a taller height range for full-size SUVs Torin BIG RED T46002A
Lightweight Aluminum construction for easier carrying, for smaller SUVs only Torin aluminum 3-ton set

Types of jack stands for SUVs

Type Strengths Best for
Ratchet stands Fast height adjustment, one-handed operation Most garage work on level concrete
Double-locking stands Ratchet plus a pin or second lock for extra security Anyone working under a heavy SUV
Pin-style stands Positive pin through fixed holes, no ratchet teeth to wear Heavy, infrequent jobs where height steps suit the vehicle
Aluminum stands Lighter to carry and position Smaller SUVs and users who move stands often

Detailed reviews

Each pick below is judged on rated capacity, height range, locking design, and SUV fitment, with owner-report themes paraphrased from published reviews and guides.

Best Overall: Torin BIG RED T46002A Steel Jack Stands, 6 Ton

Best Overall — Best overall for most SUVs

Why the Torin T46002A is our pick

The T46002A is the top pick because it combines a 6-ton pair rating with a tall height range and double locking, which are the three things SUVs demand most. It is a straightforward steel stand pair without gimmicks, and its wide base helps stability on a garage floor.

Torin T46002A key specs

  • Rated capacity: 6 ton per pair
  • Height range: 15-3/8 to 23-13/16 inches
  • Locking: double locking, ratchet plus pin
  • Construction: steel with a wide pyramid base
  • Saddle: large surface area for better contact
  • Warranty: limited 1-year maker warranty
  • Sold as: pair
  • Material: alloy steel
  • Base: wide pyramid foot base
  • Part number: T46002A

Torin T46002A: fits and best for

Best for mid-size and full-size SUVs on hard, level concrete, especially where a short car stand cannot reach the lift point. Confirm the minimum height suits your vehicle before ordering.

Torin T46002A pros and watch-outs

  • 6-ton pair rating with margin for most SUVs
  • Tall height range for higher ground clearance
  • Double locking adds a second safety step
  • Wide base helps stability
  • Simple, proven ratchet design
  • Heavier than aluminum stands
  • Minimum height may be too tall for very low vehicles
  • Ratchet teeth need inspection before each use
  • No carrying handle listed in the specifications

Torin T46002A: what owners report

  • Owners moving from short car stands to this taller set describe the extra height as the main benefit for SUVs and trucks, per a jack stand guide.
  • Reviewers note the double-locking design as a reason to prefer this set for heavier vehicles, per a Torin 6-ton review.
  • Some owners report the stands feel heavy to move, which is expected for steel 6-ton stands and worth considering if you carry them often.
  • Owner-coverage note: published owner discussion for this exact model is thin, so the points above draw on owner reports for this model and its jack stand class where a model-specific report was not available.

Torin T46002A: who should not buy

If your vehicle is a low car rather than an SUV, the minimum height may be too tall. In that case, see our car-focused guides instead of forcing a tall stand under a low lift point.

Torin T46002A: pair it with

Pair it with wheel chocks and a floor jack rated for your SUV, and keep the locking pins with the stands so they are never missing at setup time.

How the Torin T46002A compares with the other picks here

Against the other picks in this guide, the Torin T46002A stands out as best overall with 6 ton per pair on the first comparison measure and 15-3/8 to 23-13/16 in on the second. That profile suits buyers who prioritise best overall for most suvs over the strengths of the other picks, such as a different size, capacity, or mounting style. If the comparison table shows another pick closer to your needs on those measures, choose that pick instead, since the best pick is the one that matches your vehicle, space, and use, not the one with the highest headline figure.

Torin T46002A: delivery check and upkeep

When the Torin T46002A arrives, check the part number against the listing, confirm all listed components are present, and inspect for transit damage before first use. Keep the packaging and instructions until the product has been fitted and used once, so a wrong-size or damaged item can be returned without delay. For upkeep, clean the product after dusty or wet use, store it dry, and re-check fasteners, straps, or seals at regular intervals, since vibration, weather, and repeated use loosen and wear even well-made products.

Check Price

We may earn a commission at no cost to you.

Measure from the ground to your frame lift point before ordering, and choose the stand whose range covers that height in the middle, not at the top notch.

Best for Tall SUVs: Torin BIG RED AT46002R Steel Jack Stands, 6 Ton

Best for Tall SUVs — Best for taller SUVs

Why the Torin AT46002R is our pick

The AT46002R is built for the same 6-ton class as the top pick but is the better choice when height is the limiting factor. Its maximum height gives working room under taller SUVs, and its forged steel construction is made for repeated garage use.

Torin AT46002R key specs

  • Rated capacity: 6 ton per pair
  • Maximum height: 23.81 inches
  • Construction: forged steel
  • Base: wide pyramid foot base
  • Saddle: large surface area
  • Part number: AT46002R
  • Sold as: pair
  • Material: steel
  • Locking: ratchet height adjustment
  • Warranty: Not published

Torin AT46002R: fits and best for

Best for tall, full-size, and lifted SUVs where a standard stand cannot reach the lift point. Measure first, because maximum height alone does not guarantee the saddle fits your lift point.

Torin AT46002R pros and watch-outs

  • 6-ton pair rating
  • Tall maximum height for SUVs
  • Wide base for stability
  • Forged steel construction
  • Large saddle contact area
  • Heavier than aluminum options
  • Minimum height may suit only taller vehicles
  • Warranty details are not published in the listing
  • Needs a jack that lifts high enough

Torin AT46002R: what owners report

  • Reviewers describe the height range as the key advantage for taller vehicles, per a Torin 6-ton review.
  • Owners note the wide base as a stability benefit on concrete floors, per a jack stand guide.
  • Some owners mention the weight when moving the pair, which is normal for steel 6-ton stands.
  • Owner-coverage note: published owner discussion for this exact model is thin, so the points above draw on owner reports for this model and its jack stand class where a model-specific report was not available.

Torin AT46002R: who should not buy

If your SUV is low or small, a shorter stand may seat better. Do not choose this set on capacity alone when the minimum height is above your lift point.

Torin AT46002R: pair it with

Pair it with a high-lift floor jack and wheel chocks, so the vehicle can be raised high enough for the stands to seat correctly.

How the Torin AT46002R compares with the other picks here

Against the other picks in this guide, the Torin AT46002R stands out as best for tall suvs with 6 ton per pair on the first comparison measure and Up to 23.81 in on the second. That profile suits buyers who prioritise best for taller suvs over the strengths of the other picks, such as a different size, capacity, or mounting style. If the comparison table shows another pick closer to your needs on those measures, choose that pick instead, since the best pick is the one that matches your vehicle, space, and use, not the one with the highest headline figure.

Torin AT46002R: delivery check and upkeep

When the Torin AT46002R arrives, check the part number against the listing, confirm all listed components are present, and inspect for transit damage before first use. Keep the packaging and instructions until the product has been fitted and used once, so a wrong-size or damaged item can be returned without delay. For upkeep, clean the product after dusty or wet use, store it dry, and re-check fasteners, straps, or seals at regular intervals, since vibration, weather, and repeated use loosen and wear even well-made products.

Check Price

We may earn a commission at no cost to you.

Raise the vehicle slowly and seat both stands at the same notch height before lowering onto them.

Best Value 6-Ton: TCE 6 Ton Double Locking Steel Jack Stands AT46002AU

Best Value 6-Ton — Best value 6-ton pair

Why the TCE AT46002AU is our pick

The TCE set gives the same 6-ton class and double-locking idea as the top pick, which makes it a sensible value choice for SUV owners who need capacity and height. Its specifications mirror the common 6-ton pattern, so it is easy to compare directly.

TCE AT46002AU key specs

  • Rated capacity: 6 ton per pair
  • Height range: 15-3/8 to 23-13/16 inches
  • Locking: double locking
  • Construction: steel
  • Sold as: pair
  • Part number: AT46002AU
  • Material: steel
  • Base: wide foot base
  • Saddle: standard jack stand saddle
  • Warranty: Not published

TCE AT46002AU: fits and best for

Best for mid-size and full-size SUVs on concrete, where a 6-ton pair and a tall range are needed. Check the saddle fit at your manual lift points before first use.

TCE AT46002AU pros and watch-outs

  • 6-ton pair rating
  • Double locking design
  • Tall height range
  • Steel construction
  • Direct alternative to the top pick
  • Warranty details are not published in the listing
  • Heavier than aluminum stands
  • Saddle shape is standard, not vehicle-specific
  • Needs a suitable floor jack

TCE AT46002AU: what owners report

  • Owners of 6-ton double-locking stands generally report confidence from the second lock, per a jack stand guide.
  • Some owners note that 6-ton stands are heavier than expected, which matters if you move them between vehicles often.
  • Owner reports for this class often stress checking the pin before every use, which applies to this set too.
  • Owner-coverage note: published owner discussion for this exact model is thin, so the points above draw on owner reports for this model and its jack stand class where a model-specific report was not available.

TCE AT46002AU: who should not buy

If you need a lightweight set for a small SUV, this steel 6-ton pair is heavier than you need. Choose the aluminum pick instead, after confirming height fit.

TCE AT46002AU: pair it with

Pair it with wheel chocks and a floor jack with enough lift height for your SUV.

How the TCE AT46002AU compares with the other picks here

Against the other picks in this guide, the TCE AT46002AU stands out as best value 6-ton with 6 ton per pair on the first comparison measure and 15-3/8 to 23-13/16 in on the second. That profile suits buyers who prioritise best value 6-ton pair over the strengths of the other picks, such as a different size, capacity, or mounting style. If the comparison table shows another pick closer to your needs on those measures, choose that pick instead, since the best pick is the one that matches your vehicle, space, and use, not the one with the highest headline figure.

TCE AT46002AU: delivery check and upkeep

When the TCE AT46002AU arrives, check the part number against the listing, confirm all listed components are present, and inspect for transit damage before first use. Keep the packaging and instructions until the product has been fitted and used once, so a wrong-size or damaged item can be returned without delay. For upkeep, clean the product after dusty or wet use, store it dry, and re-check fasteners, straps, or seals at regular intervals, since vibration, weather, and repeated use loosen and wear even well-made products.

Check Price

We may earn a commission at no cost to you.

Store the pins with the stands, and check both locks before lowering the vehicle onto them.

Best Lightweight: Torin BIG RED AT43004BR Aluminum Jack Stands, 3 Ton

Best Lightweight — Best lightweight pick for smaller SUVs

Why the Torin AT43004BR is our pick

The aluminum 3-ton set is the lightweight option in this guide. It is easier to carry and position than steel 6-ton pairs, and it suits smaller SUVs where a 3-ton pair rating and its height range are enough. It is not a substitute for a 6-ton pair on a full-size SUV.

Torin AT43004BR key specs

  • Rated capacity: 3 ton per pair
  • Maximum height: 15.63 inches
  • Construction: aluminum
  • Sold as: pair
  • Part number: AT43004BR
  • Material: aluminum
  • Color: black and silver
  • Locking: ratchet with locking pins
  • Base: standard jack stand base
  • Warranty: Not published

Torin AT43004BR: fits and best for

Best for smaller, lighter SUVs and crossovers on level concrete, where the height range reaches the manual lift points. Do not use it for a full-size or lifted SUV.

Torin AT43004BR pros and watch-outs

  • Lighter than steel 6-ton stands
  • Easier to carry and position
  • 3-ton rating suits smaller SUVs
  • Locking pins included in the design
  • Compact to store
  • Lower capacity than 6-ton picks
  • Shorter maximum height
  • Not suitable for full-size SUVs
  • Aluminum needs inspection for cracks and dents

Torin AT43004BR: what owners report

  • Owners of aluminum stands often cite weight as the main benefit, per a jack stand guide.
  • Some owners report that aluminum stands are easier to store in a small garage, which matters for apartment and condo owners.
  • Owner reports also warn to check aluminum stands for damage after any drop, since dents matter more than on steel.
  • Owner-coverage note: published owner discussion for this exact model is thin, so the points above draw on owner reports for this model and its jack stand class where a model-specific report was not available.

Torin AT43004BR: who should not buy

If your SUV is full-size, lifted, or near the 3-ton pair limit, do not buy this set. Choose a 6-ton pair from this guide instead.

Torin AT43004BR: pair it with

Pair it with wheel chocks and a jack rated for your smaller SUV, and inspect the aluminum body before every use.

How the Torin AT43004BR compares with the other picks here

Against the other picks in this guide, the Torin AT43004BR stands out as best lightweight with 3 ton per pair on the first comparison measure and Up to 15.63 in on the second. That profile suits buyers who prioritise best lightweight pick for smaller suvs over the strengths of the other picks, such as a different size, capacity, or mounting style. If the comparison table shows another pick closer to your needs on those measures, choose that pick instead, since the best pick is the one that matches your vehicle, space, and use, not the one with the highest headline figure.

Torin AT43004BR: delivery check and upkeep

When the Torin AT43004BR arrives, check the part number against the listing, confirm all listed components are present, and inspect for transit damage before first use. Keep the packaging and instructions until the product has been fitted and used once, so a wrong-size or damaged item can be returned without delay. For upkeep, clean the product after dusty or wet use, store it dry, and re-check fasteners, straps, or seals at regular intervals, since vibration, weather, and repeated use loosen and wear even well-made products.

Check Price

We may earn a commission at no cost to you.

For aluminum stands, check for cracks, dents, and bent pins before each use, and retire a damaged stand rather than continuing to use it.

Spec comparison

Attribute Torin T46002A Torin AT46002R TCE AT46002AU Torin AT43004BR
Rated capacity per pair 6 ton 6 ton 6 ton 3 ton
Height range 15-3/8 to 23-13/16 in Up to 23.81 in 15-3/8 to 23-13/16 in Up to 15.63 in
Locking Double locking Ratchet Double locking Ratchet plus pins
Material Steel Forged steel Steel Aluminum
Base and saddle Wide base Wide base, large saddle Not published Not published
Best for Most SUVs Tall or lifted SUVs Mid-size and full-size SUVs at value Smaller, lighter SUVs only
Portability Heavy steel pair Heavy steel pair Heavy steel pair Lighter and easier to carry
Second-lock safety step Yes, double locking No, ratchet only Yes, double locking Pins included
Pack Pair Pair Pair Pair
Warranty Limited 1 year Not published Not published Not published
Check Price

Check Price

Check Price

Check Price

Check Price

Editorial judgement, not test results: the comparison above ranks published specifications and owner-report themes, not measured performance.

Installation and use basics

Lift on a hard, level surface, chock the wheels that stay on the ground, raise the vehicle with a jack rated for the load, place both stands at the manual lift points, lower the vehicle onto the stands, and give the vehicle a firm shake check before any work underneath. Remove the stands in reverse order and never rely on the jack alone. If a stand will not sit flat or the height is at its top notch, choose a taller stand instead of forcing the fit.

Related reading on this site: Jack Stands category, Garage and Workshop Equipment category, best ATV winch guide, snatch block guide, tree saver strap guide, D-ring shackles guide, truck battery charger guide, safety chains guide, garage signs guide, ATV winch for the money guide, ATV winch for plowing guide, truck bed liners guide, truck bed swing case guide, LED work lights guide.

Safety essentials

Work on hard, level ground only. Chock the wheels on the ground. Use the vehicle manual lift points. Lower the vehicle onto the stands and shake-check before going underneath. Never work under a vehicle held only by a jack. Keep children and bystanders clear, and inspect stands for bent teeth, cracks, or damaged pins before every use.

Torin BIG RED T46002A Steel Jack Stands, 6 Ton. Keep a second matched pair on hand for four-corner work, and never mix different stand models under one vehicle.

Check Price

Torin BIG RED AT46002R Steel Jack Stands, 6 Ton. Use this taller pair only on hard, level concrete, and shake-check the vehicle before working underneath.

Check Price

TCE 6 Ton Double Locking Steel Jack Stands AT46002AU. Use both locks on every stand, every time, and never work under a vehicle on a single lock alone.

Check Price

Troubleshooting

Symptom Likely cause Fix
Stand will not reach lift point Stand too short for SUV ride height Use a taller 6-ton pair; do not extend with blocks
Stand rocks on the floor Uneven or soft surface Move to hard, level concrete and re-seat the base
Ratchet slips or pin will not fit Worn teeth, bent pin, or dirt in mechanism Remove from service and replace the set
Vehicle shifts after lowering Lift point missed or chocks missing Raise, re-chock, and re-seat both stands
Saddle does not sit flat Wrong lift point or saddle shape Use the manual lift point and a stand with a matching saddle

Before you order: final checklist

Before ordering any pick in this guide, confirm five things: the size or capacity fits your vehicle and use, the fitment or mounting suits your setup, the included components match what you need, the warranty and return terms are acceptable, and you have the tools or mounts needed for install. Measure twice, check the listing fitment or dimensions, and compare the pick against the comparison table one last time. A careful check now avoids the most common buyer regret, which is ordering a good product for the wrong vehicle, size, or job.

Maintenance and storage

Store products from this guide clean and dry, away from direct sun and chemicals where possible, and inspect them before each use. For mechanical products, check moving parts, locks, and fasteners; for fabric and rubber products, check for tears, fading, and adhesive failure; for electrical products, check wiring, connectors, and seals. Replace worn or damaged items rather than continuing to use them, since a worn tool, stand, cover, or anchor can fail at the worst moment. Keep instructions and part numbers with the product, so replacements and warranty claims are straightforward.

Who should NOT buy these

Do not buy short car-only stands for a lifted or full-size SUV, because height, not just capacity, decides whether the stand can reach the lift point safely. Do not buy a single stand when you need a pair, and do not buy stands with a damaged or missing locking pin. If your SUV is lifted, measure first and choose a taller 6-ton pair rather than stretching a short stand to its limit. The Torin T43202 is excluded from the SUV picks in this guide because its listing states it is not suitable for SUV/truck use.

Final verdict

Best Overall: Torin BIG RED T46002A Steel Jack Stands, 6 Ton —

Check Price

Best for Tall SUVs: Torin BIG RED AT46002R Steel Jack Stands, 6 Ton —

Check Price

Best Value 6-Ton: TCE 6 Ton Double Locking Steel Jack Stands AT46002AU —

Check Price

Best Lightweight: Torin BIG RED AT43004BR Aluminum Jack Stands, 3 Ton —

Check Price

FAQ

What size jack stands do I need for an SUV?

For most SUVs, a 6-ton pair is the safe default because it covers the weight and, just as importantly, usually offers the taller height range SUVs need. Smaller SUVs can use a 3-ton pair only if the height range reaches the manual lift points with margin.

Are 3-ton jack stands safe for an SUV?

They can be safe for a smaller, lighter SUV when the pair rating covers the raised end and the height range fits, but they are not the right choice for a full-size or lifted SUV. When in doubt, step up to a 6-ton pair.

Can I use one jack stand at a time?

No. Always use a matched pair at the manual lift points, with the other wheels chocked. A single stand cannot keep a vehicle stable while you work underneath it.

Where do jack stands go on an SUV?

Under the frame or axle at the lift points shown in your vehicle manual. Never place stands under body panels, suspension arms, or a floor pan, and never improvise a lift point.

Do I need wheel chocks with jack stands?

Yes. Chock the wheels that stay on the ground, work on hard, level ground, and lower the vehicle onto the stands before going underneath. The jack alone is never a support.

What is double locking on a jack stand?

Double locking means a ratchet pawl plus a second lock, usually a pin, that must both be released before the stand can lower. It adds protection against accidental release compared with a ratchet alone.

How do I check jack stands before use?

Look for bent ratchet teeth, cracked welds, a bent or missing pin, and a base that does not sit flat. If anything is damaged, remove the set from service and replace it rather than repairing it.

Can jack stands be used on gravel or a slope?

No. Use hard, level concrete with less than a slight slope, as maker manuals require. Gravel, grass, and slopes let stands sink or shift, which is a serious safety risk.

Should I buy aluminum or steel jack stands?

Steel stands are heavier and generally offer taller, higher-capacity options for SUVs. Aluminum stands are easier to carry and suit smaller SUVs, but check capacity and height range before choosing them.

Where can I find more Jack Stands guides?

Start with the Jack Stands category on this site, then read the related guides at the end of this article, which cover neighbouring products and the same kind of garage, truck, or off-road work. The category page collects every guide in this family, so it is the best place to compare a pick here with a related product before ordering.

Sources

By Leo, Founder, WinchInsider

Leo researches automotive tools and recovery gear from maker specifications, manuals, and owner reports, and writes practical buying guides for truck, off-road, and garage use.

Related guides

Top pick: Torin BIG RED T46002A Steel Jack Stands, 6 Ton

Check Price