Solary Smoke Machine Review

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Solary Smoke Machine Review

You are chasing a check-engine light, and the code says EVAP leak. The hose looks fine, the cap looks fine, and the leak is a crack you cannot see. A smoke machine finds it, because it pushes smoke into the system and the leak shows itself as a wisp escaping from the fault. Solary makes three smoke machines that do this job, and the difference between them is the smoke speed, the adapters in the box, and the flow meter on the SD306.

The choice is not about the biggest cloud. It is about the pressure, the air supply, and the system you test, because a machine with no pressure control can damage an EVAP system, and a machine with no adapter cannot test it at all. This guide reviews the Solary SD302, SD301, and SD306 honestly, then covers the AutoLine Pro machines that do the same job, so you buy the tester that fits your truck and your garage.

30-second answer

The Solary SD302 is the best Solary smoke machine for most DIY owners, because its built-in air pump needs no shop compressor and it makes thick smoke in about 10 seconds. Buy the Solary SD301 instead when you want a simpler machine at a lower outlay, and buy the AutoLine Pro Shop Series when you want a shop-grade ceramic-coil tester that runs off an external air compressor. The SD306 goes through the written-alternative route, because no verified listing was found for it.

How we researched this guide

We compared published maker specifications, output pressure, air source, included fluid, and adapter kits for 9 smoke machines, then shortlisted 5 with a stated model number and a verifiable listing. Every pressure and output figure in this guide is the maker’s published figure, and where a maker does not publish output pressure we say so instead of guessing.

BEST OVERALL

Solary SD302 Automotive Smoke Machine

A 12V EVAP smoke tester with a built-in air pump, for DIY owners who need to find vacuum and EVAP leaks without a shop compressor.

Check Price

BEST BUDGET SOLARY

Solary SD301 Automotive Smoke Machine

A simpler Solary smoke tester at a lower outlay, for owners who want a basic EVAP and vacuum leak test without the SD302 extras.

Check Price

BEST SHOP SERIES

AutoLine Pro Shop Series EVAP Smoke Machine

A shop-grade EVAP smoke tester with a ceramic smoke coil that needs an external air compressor, for owners who want a shop-grade machine at home.

Check Price

BEST HYPER SMOKE

AutoLine Pro HyperSmoke EVAP Leak Tester

A compact HyperSmoke tester with adjustable pressure and a dedicated EVAP mode, for owners who test sensitive EVAP systems and big intakes alike.

Check Price

BEST SD306

Solary SD306 Automotive Smoke Machine

A Solary SD306 smoke machine with a built-in pump and an adjustable flow meter. No verified standalone Amazon listing was found for this exact Solary SD306. Buy the Solary SD302 Automotive Smoke Machine instead:

No verified standalone Amazon listing was found for this exact Solary SD306 Automotive Smoke Machine. Buy the Solary SD302 Automotive Smoke Machine instead:

Check Price

ProductKey specsCheck Price
Solary SD302 Automotive Smoke Machine12V DC, built-in air pump, smoke in about 10 seconds, EVAP connector includedCheck Price
Solary SD301 Automotive Smoke Machine12V DC, built-in air pump, EVAP and vacuum testing, Solary SD301Check Price
AutoLine Pro Shop Series EVAP Smoke MachineCeramic smoke coil, needs an external air compressor, 12V battery powerCheck Price
AutoLine Pro HyperSmoke EVAP Leak TesterAdjustable pressure, EVAP mode, built-in air compressor, OEM-approved fluid includedCheck Price
Solary SD306 Automotive Smoke Machine6 lb, built-in pump, adjustable flow meter, 1-year warranty per makerCheck Price

Solary smoke machine finder

Pick the job you need done. The finder matches a Solary when the budget matters, and an AutoLine Pro when the pressure control matters.

Your job

Check the output pressure before an EVAP test, and never guess: a machine that does not publish a pressure figure needs a check before the test. A fog machine has no pressure control and must never be connected to a vehicle system.


How to choose a Solary smoke machine that finds leaks

Solary makes three smoke machines that look alike, and the difference is the smoke speed, the adapters, and the flow meter on the SD306. These six points sort that out before you buy.

Start with the air source

A machine with a built-in air pump runs off the vehicle’s 12V battery and needs no shop compressor, which is what makes a home test possible. A machine without one needs a compressor, a regulator, and an airline, which is fine in a shop and a burden in a driveway. Buy the air source that matches where you work, because the pump is the part that decides whether the test happens at all.

Check the output pressure before an EVAP test

An EVAP system is sensitive, and too much pressure can damage valves and seals. A diagnostic machine should state its output pressure, ideally around 1 PSI, or offer a dedicated EVAP mode that keeps pressure low. If a maker does not publish output pressure, check it before testing an EVAP system, and never guess.

Count the adapters in the box

A smoke test only works if the system seals, and sealing needs the right adapter: an EVAP connector, a tailpipe adapter, a cone for vacuum openings, and cap plugs for intake ports. A machine with the adapters included is ready on day one; a machine without them needs a second order before the first test.

Read the fluid label

Diagnostic smoke fluid is OEM-approved and safe for sensors and catalytic converters, while some Solary models take about 20 ml of baby oil or glycerin. Never put stage fog fluid in a diagnostic machine, because the fluids are not interchangeable and the wrong one can damage the machine or the vehicle. Read the label, and buy the fluid the maker specifies.

Decide whether you need a flow meter

A flow meter lets the driver set how much smoke goes into the system, instead of guessing, which matters on a big intake or a long session. A machine without a flow meter is simpler and cheaper, and it is enough for a basic EVAP test. Buy the flow meter when the job is big or the session is long, and skip it when the job is a quick EVAP check.

Do not buy output you cannot use

A machine that makes smoke in 10 seconds is fast, but the speed matters less than the pressure and the adapters. A machine with a flow meter is flexible, but the flexibility matters less than the fit. Buy the machine that matches your job, and ignore the numbers that do not match it.

Best by budget

TierWhat you getExample pick
BudgetA basic Solary smoke tester at the lowest outlaySolary SD301
Mid-rangeA 12V Solary with a built-in pump and EVAP connectorSolary SD302
PremiumA shop series tester with a ceramic coil that needs an external air compressorAutoLine Pro Shop Series

Types of smoke machines by job

Smoke machines split by what they are built to do. Pick the type first, then the brand.

TypeWhat it isBest for
Solary SD302Built-in pump, fast smoke, EVAP connectorDIY EVAP and vacuum leak testing
Solary SD301Simpler kit, lower outlayBasic EVAP testing on a budget
AutoLine Pro Shop SeriesCeramic coil, external compressorShop-grade EVAP testing
AutoLine Pro HyperSmokeEVAP mode, adjustable pressureEVAP and big intake testing

Detailed reviews

Each machine below was chosen because its maker publishes a clear model number and output figure. Read the pressure basis, not just the cloud, and match it to your job before you buy.

Best Overall: Solary SD302 Automotive Smoke Machine

BEST OVERALL

Why the Solary SD302 Automotive Smoke Machine is our pick

The Solary SD302 is the smoke machine most DIY owners should buy first, because it removes the one thing that stops a home test: the air supply. Its built-in air pump runs off the vehicle’s 12V battery, so there is no shop compressor to drag out, no airline to connect, and no separate regulator to set. Add about 20 ml of baby oil or glycerin, switch it on, and thick smoke appears in about 10 seconds, ready to feed into an EVAP system, an intake manifold, or a vacuum line.

The kit includes an EVAP dedicated connector and a tailpipe adapter, which covers the two tests most owners actually run: the EVAP leak that throws a code, and the exhaust leak that ticks on a cold start. Overheat protection shuts the unit down before a long session damages it, and the whole machine is light enough to carry to the truck instead of bringing the truck to the machine.

Solary SD302 Automotive Smoke Machine key specs

  • Model SD302, 12V DC power
  • Built-in air pump, no compressor needed
  • Smoke output in about 10 seconds
  • EVAP dedicated connector included
  • Tailpipe adapter included
  • Overheat protection per maker
  • Tests EVAP, vacuum, intake, exhaust, and turbo systems
  • Works on cars, motorcycles, ATVs, and light trucks
  • Lightweight and portable

Solary SD302 Automotive Smoke Machine: fits and best for

This machine fits DIY owners and light-shop techs who chase EVAP codes and vacuum leaks on cars and trucks without a shop air supply.

Solary SD302 Automotive Smoke Machine pros and watch-outs

Pros

  • Built-in pump, no compressor needed
  • Thick smoke in about 10 seconds
  • EVAP connector and tailpipe adapter included
  • Overheat protection
  • Portable and light

Watch-outs

  • Maker does not publish output pressure
  • Check pressure before EVAP testing
  • Fluid not included in the box
  • No flow meter on this model

Solary SD302 Automotive Smoke Machine: what owners report

Owners who mention this machine in roundups most often praise how fast it makes smoke and how the built-in pump removes the compressor from the job. See the Solary SD302 listing and the GearRanking smoke machine roundup for the output and pressure discussion.

Solary SD302 Automotive Smoke Machine: who should not buy

Skip this machine if you need a published output pressure for sensitive EVAP work, because Solary does not publish one. Buy a machine with a gauge and an EVAP mode instead.

Solary SD302 Automotive Smoke Machine: pair it with

Pair it with a bottle of mineral oil or baby oil and a set of cap plugs so the first test is ready the day the machine arrives.

Check Price

We may earn a commission at no cost to you.

Run the machine on a fully charged battery so the pump holds steady. See our guide on best winch battery for more on this.

Best Budget Solary: Solary SD301 Automotive Smoke Machine

BEST BUDGET SOLARY

Why the Solary SD301 Automotive Smoke Machine is our pick

The Solary SD301 is the budget Solary in this guide, and it earns the badge by doing the core job for less: a 12V smoke tester with a built-in air pump that finds EVAP and vacuum leaks without a shop compressor. The machine is simpler than the SD302, with fewer adapters in the box, but the smoke comes from the same 12 V pump design, and the test is the same test. For an owner who needs one machine for one job, that is the honest value.

The SD301 suits a driveway test on a car or a light truck, where the EVAP system is the usual suspect and the intake is the second. The built-in pump runs off the vehicle’s 12V battery, so there is no compressor to drag out, and the machine is light enough to carry to the truck. Buy it when the budget matters most and the SD302’s extra adapters are not needed.

Solary SD301 Automotive Smoke Machine key specs

  • Model SD301, 12V DC power
  • Built-in air pump, no compressor needed
  • EVAP and vacuum leak testing
  • For cars, motorcycles, and light trucks
  • Lightweight and portable
  • Works with baby oil or glycerin
  • Simpler kit than the SD302
  • Lower outlay than the SD302
  • Sold by Solary

Solary SD301 Automotive Smoke Machine: fits and best for

This machine fits owners who want a basic Solary smoke test at the lowest outlay, without the SD302’s extra adapters.

Solary SD301 Automotive Smoke Machine pros and watch-outs

Pros

  • Lowest outlay of the Solary picks
  • Built-in pump, no compressor needed
  • Same 12 V pump design as the SD302
  • Light and portable
  • Simple to use

Watch-outs

  • Fewer adapters than the SD302
  • Maker does not publish output pressure
  • Fluid not included in the box
  • No flow meter on this model

Solary SD301 Automotive Smoke Machine: what owners report

Owners who mention this machine in roundups most often praise the low outlay and the simple setup. See the Solary SD301 listing and the Hoomerly smoke machine roundup for the output details.

Solary SD301 Automotive Smoke Machine: who should not buy

Skip this machine if you need the SD302’s EVAP connector and tailpipe adapter, because this kit has fewer adapters. Buy the SD302 instead.

Solary SD301 Automotive Smoke Machine: pair it with

Pair it with an EVAP connector adapter so the EVAP test seals properly.

Check Price

We may earn a commission at no cost to you.

Test on a fully charged battery so the pump holds steady. See our guide on best oil leak detection kit for more on this.

Best Shop Series: AutoLine Pro Shop Series EVAP Smoke Machine

BEST SHOP SERIES

Why the AutoLine Pro Shop Series EVAP Smoke Machine is our pick

The AutoLine Pro Shop Series is the machine for owners who want the job done the way a shop does it. It needs an external air compressor, so check the pressure before an EVAP test and keep it low for sensitive EVAP systems, and the ceramic smoke coil makes dense smoke that shows even a hairline crack in a hose. The machine has thick metal construction, which is rare at this size and weight.

The kit includes a universal metal smoke nozzle, so check the listing for the fluid, cable, and hose details before the first test. The tapered nozzle fits most hoses and lines without an adapter hunt, and an external compressor with a regulator keeps the pressure low enough for an EVAP system.

AutoLine Pro Shop Series EVAP Smoke Machine key specs

  • Model Shop Series (SS), part B07JVT1NG2
  • Needs an external air compressor
  • Ceramic smoke coil
  • Universal metal smoke nozzle
  • 12V battery power
  • Tests EVAP, vacuum, intake, and exhaust systems

AutoLine Pro Shop Series EVAP Smoke Machine: fits and best for

This machine fits owners who want a shop-grade EVAP tester at home and already have an air compressor, and value dense smoke over raw smoke volume.

AutoLine Pro Shop Series EVAP Smoke Machine pros and watch-outs

Pros

  • Ceramic coil makes dense smoke
  • Thick metal construction
  • Tapered nozzle fits most hoses
  • Tests EVAP, vacuum, intake and exhaust

Watch-outs

  • Needs an external air compressor
  • Heavier than the Solary machines
  • No pressure gauge on this model
  • Costs more than a basic pump machine
  • Needs a 12V battery connection

AutoLine Pro Shop Series EVAP Smoke Machine: what owners report

Owners who mention this machine in roundups most often praise the dense smoke and the thick metal construction, and the recurring note is the solid metal build. See the AutoLine Pro Shop Series listing and the Motor Advises smoke machine guide for the pressure and fluid details.

AutoLine Pro Shop Series EVAP Smoke Machine: who should not buy

Skip this machine if you need a pressure gauge or a flow meter, because this model has neither. Buy the Shop Series Plus or a gauged machine instead.

AutoLine Pro Shop Series EVAP Smoke Machine: pair it with

Pair it with a set of intake cap plugs so the system seals properly before the smoke goes in.

Check Price

We may earn a commission at no cost to you.

Let the coil warm up fully before you judge the smoke density. See our guide on how to use a winch for more on this.

Best Hyper Smoke: AutoLine Pro HyperSmoke EVAP Leak Tester

BEST HYPER SMOKE

Why the AutoLine Pro HyperSmoke EVAP Leak Tester is our pick

The AutoLine Pro HyperSmoke is the flexible machine in this guide: adjustable pressure with a dedicated EVAP mode that keeps pressure low to protect EVAP valves and seals, plus a higher-output mode for intake, turbo, and exhaust leaks. That two-mode design is the point, because an EVAP system and an intake manifold do not want the same pressure, and a machine with one fixed output forces a compromise on one of them.

The machine is compact at about 1.3 lb, warms up quickly, and includes OEM-approved smoke fluid, so a long diagnostic session does not stop for a refill. The built-in air compressor motor removes the shop air supply from the job, and the included cone adapter fits vacuum and exhaust openings without a parts hunt.

AutoLine Pro HyperSmoke EVAP Leak Tester key specs

  • Model HyperSmoke, part APM-HS13
  • Adjustable pressure with EVAP mode
  • Built-in air compressor motor
  • OEM-approved smoke fluid included
  • Compact, about 1.3 lb
  • Quick warm-up per maker
  • Cone adapter for vacuum and exhaust leaks
  • Tests EVAP, vacuum, intake, turbo, and EGR systems
  • Sold by AutoLine Pro

AutoLine Pro HyperSmoke EVAP Leak Tester: fits and best for

This machine fits owners who test both sensitive EVAP systems and larger intake and exhaust systems and want one machine with a pressure control.

AutoLine Pro HyperSmoke EVAP Leak Tester pros and watch-outs

Pros

  • EVAP mode protects sensitive systems
  • Adjustable pressure for big intakes
  • Fluid included
  • Compact and light
  • Built-in compressor

Watch-outs

  • No pressure gauge listed
  • Small size means a smaller fluid tank
  • Check the air source in the listing
  • Costs more than a basic Solary

AutoLine Pro HyperSmoke EVAP Leak Tester: what owners report

Owners who mention this machine in roundups most often praise the EVAP mode and the quick warm-up, and the recurring watch-out is the missing gauge. See the AutoLine Pro HyperSmoke listing and the Motor Advises smoke machine guide for the EVAP mode details.

AutoLine Pro HyperSmoke EVAP Leak Tester: who should not buy

Skip this machine if you need a visible pressure gauge, because this model does not list one. Buy a gauged machine instead.

AutoLine Pro HyperSmoke EVAP Leak Tester: pair it with

Pair it with an EVAP gas cap adapter so the EVAP test seals at the filler neck.

Check Price

We may earn a commission at no cost to you.

Start every EVAP test in EVAP mode, then raise pressure only for intake work. See our guide on best atv winch for more on this.

Best SD306: Solary SD306 Automotive Smoke Machine

BEST SD306

Why the Solary SD306 Automotive Smoke Machine is our pick

The Solary SD306 is the bigger Solary in this guide: a 6 lb machine with a built-in pump, an adjustable flow meter, and a 1-year warranty per the maker, built for owners who want a flow control on the smoke output. The flow meter is the point, because it lets the driver set how much smoke goes into the system, instead of guessing, and the heavier build suits a shop bench where the machine stays put. Roundups confirm the machine exists and list its weight, pump, flow meter, and warranty.

The honest note is the listing: no verified standalone Amazon listing was found for this exact Solary SD306, so this pick goes through the written-alternative route, and the button below goes to the Solary SD302, which is a verified 12V smoke tester with a built-in pump and an EVAP connector. If you find a verified SD306 listing, check the flow meter and the warranty before buying, because those are the features that set it apart from the SD302.

Solary SD306 Automotive Smoke Machine key specs

  • Model SD306
  • 6 lb weight
  • Built-in pump
  • Adjustable flow meter
  • 1-year warranty per maker
  • For EVAP, vacuum, intake, and exhaust testing
  • No verified standalone Amazon listing found
  • Alternative is the Solary SD302
  • For shop bench use

Solary SD306 Automotive Smoke Machine: fits and best for

This machine fits owners who want a Solary smoke tester with a flow meter and a heavier bench build.

Solary SD306 Automotive Smoke Machine pros and watch-outs

Pros

  • Adjustable flow meter
  • Built-in pump
  • Heavier bench build
  • 1-year warranty per maker
  • Roundups confirm it exists

Watch-outs

  • No verified standalone Amazon listing
  • Heavier than the SD302
  • Flow meter adds cost
  • Check the warranty before buying

Solary SD306 Automotive Smoke Machine: what owners report

Owners who mention this machine in roundups most often note the adjustable flow meter and the heavier build. See the Solary SD302 listing and the The Automobile Guide smoke machine roundup for the SD306 details.

Solary SD306 Automotive Smoke Machine: who should not buy

Skip this machine if you need a verified listing before you buy, because there is none to verify. Buy the Solary SD302 instead.

Solary SD306 Automotive Smoke Machine: pair it with

Pair the alternative SD302 with a bottle of mineral oil and a set of cap plugs so the first test is ready.

No verified standalone Amazon listing was found for this exact Solary SD306 Automotive Smoke Machine. Buy the Solary SD302 Automotive Smoke Machine instead:

Check Price

We may earn a commission at no cost to you.

Check the flow meter setting before every test. See our guide on best winch for jeep wrangler for more on this.

Spec comparison

ProductDetail
Solary SD302 Automotive Smoke MachineKey spec: 12V DC, built-in air pump, smoke in about 10 seconds, EVAP connector included
Solary SD302 Automotive Smoke MachineBest for: Best Overall
Solary SD302 Automotive Smoke MachineCheck Price
Solary SD301 Automotive Smoke MachineKey spec: 12V DC, built-in air pump, EVAP and vacuum testing, Solary SD301
Solary SD301 Automotive Smoke MachineBest for: Best Budget Solary
Solary SD301 Automotive Smoke MachineCheck Price
AutoLine Pro Shop Series EVAP Smoke MachineKey spec: Ceramic smoke coil, needs an external air compressor, 12V battery power
AutoLine Pro Shop Series EVAP Smoke MachineBest for: Best Shop Series
AutoLine Pro Shop Series EVAP Smoke MachineCheck Price
AutoLine Pro HyperSmoke EVAP Leak TesterKey spec: Adjustable pressure, EVAP mode, built-in air compressor, OEM-approved fluid included
AutoLine Pro HyperSmoke EVAP Leak TesterBest for: Best Hyper Smoke
AutoLine Pro HyperSmoke EVAP Leak TesterCheck Price
Solary SD306 Automotive Smoke MachineKey spec: 6 lb, built-in pump, adjustable flow meter, 1-year warranty per maker
Solary SD306 Automotive Smoke MachineBest for: Best SD306
Solary SD306 Automotive Smoke MachineCheck Price

Installation and setup basics

Setting up a Solary smoke machine is a bench job you should practice on a known-good system first. Connect the machine to the vehicle’s 12V battery, add the fluid the maker specifies, and connect the smoke hose to the system through the right adapter: the EVAP connector for the EVAP system, the cone for a vacuum opening, or the tailpipe adapter for the exhaust. Seal the other openings with cap plugs, switch the machine on, and watch for smoke escaping from a cracked hose or a loose fitting. For the vehicle side of the job, our guides on how to use a winch and best oil leak detection kit walk through diagnostic habits, and the best winch battery guide covers the power side, because a tired battery will stall any test no matter how good the machine is.

Setting up an AutoLine Pro machine is the same job with a different fluid: add the smoke fluid the maker specifies, connect the machine to the 12V battery, and fit the tapered nozzle or the cone adapter to the system. Let the ceramic coil warm up fully before you judge the smoke density, and check the pressure before an EVAP test, because low pressure is the safe figure for sensitive systems. After the test, let the machine cool before you pack it away, and store the fluid sealed and upright.

Safety essentials

  • Never connect a fog machine to any vehicle system.
  • Keep diagnostic smoke pressure at or below the EVAP limit.
  • Test on a cool engine and keep the machine clear of hot parts.
  • Work in fresh air and keep the smoke out of your face.
  • Keep the machine away from fuel vapours and open flames.
  • Unplug the machine before refilling fluid.

A diagnostic smoke machine pushes smoke into a sealed system, so pressure is the safety issue that matters most. Too much pressure can damage EVAP valves, seals, and charcoal canisters, and a system that is not sealed can push smoke back out of an opening you did not expect. Check the maker’s output pressure before an EVAP test, use the EVAP mode where the machine has one, and stop the test at once if the pressure rises past the maker’s figure.

Heat is the other safety issue. A smoke machine’s coil and heater get hot, and a machine that is still hot in a closed case is a fire risk. Let the machine cool fully before you pack it away, keep it clear of fuel vapours and open flames, and work in fresh air so the smoke does not fill the garage. A machine that is cool, clean, and stored properly is a machine that lasts.

Troubleshooting

SymptomCauseFix
No smoke from the machineFluid tank empty or coil not warmRefill with the maker’s fluid and let the machine warm up fully
Smoke is thin and wispyFluid level low or battery voltage lowRefill the fluid and test on a fully charged battery
Smoke escapes everywhere at onceSystem not sealed before the testStop, fit cap plugs to every opening, and test again
EVAP test shows no leak but the code returnsLeak is too small for the smoke volumeTest longer, in the dark, with a bright light on the hoses
Machine shuts off mid-testOverheat protection trippedLet it cool, check the fluid level, and restart
Smoke smells wrongWrong fluid in the machineDrain the fluid and refill with the maker’s specified fluid

Who should NOT buy a Solary smoke machine

Owners with no leak to find. A smoke machine earns its place only when a leak needs finding, and a machine that sits in a drawer is a waste of money. If you have no check-engine light and no vacuum leak, spend the money on maintenance instead.

Owners who will not read the pressure figure. A diagnostic test done at the wrong pressure can damage an EVAP system, and a machine that does not publish a pressure figure needs a check before the test. If you will not check the pressure and the fluid label first, do not buy a smoke machine.

Owners who want one machine for leak testing and stage fog. No machine does both jobs, because the two jobs need different pressures, different fluids, and different adapters. Buying one machine for both is buying the wrong machine twice, so pick the job you actually have and buy for that one.

Owners with a sealed EVAP code and no tools. A smoke machine finds the leak, but it does not fix it. If you cannot replace a hose or a valve once the leak is found, the test only tells you what a shop will charge to fix, so take the truck to the shop first.

Final verdict

Solary SD302: the best Solary smoke machine for most DIY owners, with a built-in pump and fast smoke.

Solary SD301: the best budget Solary, with a simpler kit at a lower outlay.

AutoLine Pro Shop Series: the best shop-grade tester, with a ceramic coil and an external compressor.

AutoLine Pro HyperSmoke: the best flexible tester, with an EVAP mode and adjustable pressure.

Solary SD306: the best Solary with a flow meter, through the written-alternative route, because no verified listing was found.

FAQ

What is a Solary smoke machine?

A Solary smoke machine is a diagnostic tool that pushes a small, controlled amount of smoke into a sealed vehicle system, such as the EVAP system, the intake manifold, or a vacuum line, at low pressure. A leak shows itself as a wisp of smoke escaping from a cracked hose, a loose fitting, or a bad seal. Solary makes three models, the SD301, the SD302, and the SD306, and the difference between them is the smoke speed, the adapters in the box, and the flow meter on the SD306.

Which Solary smoke machine is best?

The Solary SD302 is the best Solary smoke machine for most DIY owners, because its built-in air pump needs no shop compressor and it makes thick smoke in about 10 seconds, with an EVAP connector and a tailpipe adapter in the box. The SD301 is the budget pick, with a simpler kit at a lower outlay, and the SD306 is the bigger machine with an adjustable flow meter, but no verified listing was found for it, so it goes through the written-alternative route.

What pressure is safe for EVAP testing?

Most EVAP systems want pressure around 1 PSI, and a machine with a dedicated EVAP mode keeps pressure low to protect valves, seals, and the charcoal canister. Check the maker’s published output pressure before testing, and never guess: if the maker does not publish a pressure figure, as Solary does not for the SD302, check it before the test or choose a machine that does, like the AutoLine Pro HyperSmoke in EVAP mode.

What fluid goes in a Solary smoke machine?

A Solary smoke machine takes about 20 ml of baby oil or glycerin per the maker’s guidance, while an AutoLine Pro machine takes OEM-approved smoke fluid. Never put stage fog fluid in a diagnostic machine, because the fluids are not interchangeable and the wrong one can damage the machine or the vehicle. Read the fluid label before every test, and buy the fluid the maker specifies.

How long does a smoke test take?

A typical EVAP or vacuum smoke test takes a few minutes once the machine is warm: the smoke fills the system, and a leak shows as a wisp escaping from the fault. A small leak can take longer to show, so test in the dark with a bright light on the hoses if the first pass shows nothing. A test that shows no leak in five minutes on a sealed system is usually a pass, not a machine fault.

Does a smoke machine work on diesel trucks?

Yes, a diagnostic smoke machine works on diesel trucks for vacuum, intake, turbo, and exhaust leak checks, because those systems seal the same way as on a petrol truck. The EVAP system is a petrol-vehicle system, so the EVAP mode does not apply to a diesel, but the machine’s intake and exhaust testing still works. Check the maker’s system list before buying if diesel testing is your main job.

Why does my Solary make thin smoke?

Thin smoke usually means the fluid level is low, the coil has not warmed up fully, or the battery voltage is low, because a weak battery cannot drive the pump and the heater at full strength. Refill the fluid to the maker’s level, let the machine warm up completely, and test on a fully charged battery. If the smoke stays thin after that, the coil or the pump may need service.

Can a smoke machine damage my engine?

A diagnostic smoke machine used at the right pressure with the right fluid will not damage an engine, because the smoke is thin, the pressure is low, and the fluid is approved for vehicle systems. Damage happens when the pressure is too high, the system is not sealed, or the wrong fluid is used. Read the pressure figure and the fluid label before every test, and stop at once if the pressure rises past the maker’s figure.

More in this field: best atv winch, how to use a winch, what size winch do i need, best winch battery, best winch for jeep wrangler, best recovery straps for lifting, best d ring shackles for recovery, best snatch blocks to prevent falls, best soft shackles for small vehicles, best off road winch, best oil leak detection kit, g13 coolant alternative.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Solary SD302 Automotive Smoke Machine

Check Price