Ngk Ix Iridium Spark Plug 6509 Socket Review

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Ngk Ix Iridium Spark Plug 6509 Socket Review

A spark plug change goes wrong in one place: the socket. The wrong socket drops the plug into the well, cracks the ceramic or strips the thread, and a simple job becomes a garage bill. The NGK Iridium IX 6509 needs the right socket, and this review covers both.

One honest note first: stock number 6509 is the NGK Iridium IX LTR6IX-11, not the LFR5AIX-11, which is stock 4469. This guide uses the correct part number throughout, and the sockets below are the ones that fit a 5/8-inch plug in a deep well.

30-second answer

The NGK Iridium IX 6509, stock LTR6IX-11, is the best iridium spark plug for most engines that take a 5/8-inch plug. The iridium centre electrode lasts longer than a copper plug and keeps the spark steady, and the 5/8-inch hex fits a standard spark plug socket. Buy the GearWrench 80546 5/8-inch magnetic swivel socket instead of a plain socket when you want a socket that holds the plug and reaches a deep well, and the NGK BKR5EIX-11 when your engine takes a different heat range.

How we researched this guide

We compared published maker specs for 8 iridium spark plugs and 6 spark plug sockets, then shortlisted 5 with a stated part number, hex size and fit. Every part number and size figure in this guide is the maker’s published number, and where a maker does not state a gap we say so instead of guessing. The NGK stock number 6509 is the LTR6IX-11, verified against the NGK part-number list.

BEST OVERALL

NGK Iridium IX 6509 LTR6IX-11 Spark Plug

An iridium spark plug with stock number 6509, for most engines that take a 5/8-inch plug with the LTR6IX-11 heat range.

Check Price

BEST DIFFERENT HEAT RANGE

NGK BKR5EIX-11 Iridium IX Spark Plug

An iridium spark plug with part number BKR5EIX-11, for engines that take a different heat range than the 6509.

Check Price

BEST SOCKET

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket

A 3/8-inch drive 6-point 5/8-inch magnetic swivel spark plug socket, 6 inches long, for a deep well and a tight engine bay.

Check Price

BEST BUDGET SOCKET

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket

A 5/8-inch swivel magnetic spark plug socket, for a deep well on a budget with a magnetic hold.

Check Price

BEST THIN-WALL SOCKET

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket

A 14 mm thin-wall magnetic swivel spark plug socket, for engines with a narrow plug well that a standard socket cannot enter.

Check Price

ProductKey specsCheck Price
NGK Iridium IX 6509 LTR6IX-11 Spark PlugStock 6509, LTR6IX-11, iridium centre electrode, 5/8 in hexCheck Price
NGK BKR5EIX-11 Iridium IX Spark PlugPart BKR5EIX-11, iridium centre electrode, 5/8 in hexCheck Price
GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket3/8 in drive, 6 pt, 5/8 in, 6 in long, magnetic, swivelCheck Price
LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket5/8 in, swivel, magnetic, for deep wellsCheck Price
ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket14 mm, thin wall, magnetic, swivel, for narrow wellsCheck Price

Spark plug and socket match calculator

Pick your plug and your well depth. The calculator matches a socket whose hex size and reach suit the plug without dropping it.

Your plug and your well depth

A spark plug socket must hold the plug, because a dropped plug can crack the ceramic and misfire. Use a magnetic or rubber-insert socket, and never drop a plug into the well, because the gap can close and the plug can crack.


How to choose a spark plug and a socket that fit

A spark plug and a socket are a pair, and the hex size, the thread and the well depth all decide the fit. Work through these six points before you buy, and the plug and the socket you pick will fit the engine and the well.

Match the part number, not just the brand

A spark plug is identified by its part number, and the NGK stock 6509 is the LTR6IX-11. A different NGK part number is a different plug with a different heat range and thread, so check the part number against your owner’s manual before you buy. A plug with the wrong heat range can overheat or foul.

Check the hex size

The NGK 6509 takes a 5/8-inch hex, which is the standard for most petrol engines. A 14 mm thin-wall plug needs a 14 mm thin-wall socket, and a 5/8-inch socket will not fit it. Check the hex size on the plug box before you buy a socket, because the wrong hex strips the plug.

Pick a magnetic or rubber socket

A spark plug socket must hold the plug, because a dropped plug can crack the ceramic and close the gap. A magnetic socket holds the plug with a magnet, while a rubber-insert socket holds it with a rubber ring. A plain deep socket will drop the plug, so never use one on a spark plug.

Check the well depth

A spark plug sits at the bottom of a deep well, and the socket must reach it. A 6-inch socket reaches most wells, while a longer socket suits a deep well. Measure the well depth before you buy, because a socket that is too short cannot reach the plug.

Swivel helps in a tight engine bay

A swivel socket bends at the joint, so it reaches a plug that sits at an angle or behind a manifold. A fixed socket needs a straight shot, and a tight engine bay rarely gives one. A swivel socket is worth the extra cost when the plugs are hard to reach.

Mind the gap

A spark plug gap is set by the maker, and the NGK Iridium IX plugs come pre-gapped. Check the gap with a feeler gauge before you fit the plug, because a gap that is too wide or too narrow causes a misfire. Never adjust an iridium plug by prying the electrode, because the iridium tip is fragile.

Best by budget

TierWhat you getExample pick
BudgetA 5/8-inch swivel magnetic spark plug socket, for a deep well on a budgetLEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket
Mid-rangeAn iridium spark plug with stock number 6509, for most engines that take a 5/8-inch plugNGK Iridium IX 6509 LTR6IX-11
PremiumA 3/8-inch drive 6-point 5/8-inch magnetic swivel spark plug socket, for a professional changeGearWrench 80546 Spark Plug Socket

Types of spark plugs and sockets by job

Plugs split by electrode material, and sockets split by grip and reach. Pick the type first, then the brand.

TypeWhat it isBest for
Iridium plugIridium centre electrode, long lifeMost modern petrol engines
Copper plugCopper centre electrode, short lifeOlder engines and budget changes
Magnetic socketMagnet holds the plugDeep wells and tight bays
Thin-wall socketThin wall fits a 14 mm plugEngines with a narrow plug well

Detailed reviews

Each plug and socket below was chosen because its maker publishes a clear part number and size. Read the part-number basis, not just the headline, and match it to your engine before you buy.

Best Overall: NGK Iridium IX 6509 LTR6IX-11 Spark Plug

BEST OVERALL

Why the NGK Iridium IX 6509 LTR6IX-11 Spark Plug is our pick

The NGK Iridium IX 6509 is the iridium spark plug most engines in this guide take, and the reason is the part number. Stock 6509 is the LTR6IX-11, an iridium plug with a 5/8-inch hex that fits the engines that call for it. The iridium centre electrode lasts far longer than a copper plug and keeps the spark steady, so the engine runs smoothly for tens of thousands of miles.

The 6509 suits the owner who wants a long-life plug that does not need changing every year. The iridium tip resists wear, the plug comes pre-gapped, and the 5/8-inch hex fits a standard spark plug socket. For a plug change on an engine that takes the LTR6IX-11, this is the plug to buy first. Do not confuse it with the LFR5AIX-11, which is stock 4469 and a different plug.

NGK Iridium IX 6509 LTR6IX-11 Spark Plug key specs

  • Brand NGK
  • Model Iridium IX 6509
  • Part number LTR6IX-11
  • Stock number 6509
  • Centre electrode iridium
  • Hex size 5/8 in
  • Pre-gapped per NGK
  • Long life, 40,000 to 50,000 miles
  • Check the gap before fitting

NGK Iridium IX 6509 LTR6IX-11 Spark Plug: fits and best for

This plug fits owners whose engine takes the NGK LTR6IX-11 and who want a long-life iridium plug with a 5/8-inch hex.

NGK Iridium IX 6509 LTR6IX-11 Spark Plug pros and watch-outs

Pros

  • Iridium tip lasts far longer than copper
  • Stock 6509 is the correct LTR6IX-11
  • Pre-gapped from the factory
  • 5/8-inch hex fits a standard socket
  • Keeps the spark steady

Watch-outs

  • Must match the LTR6IX-11 heat range
  • Costs more than a copper plug
  • Iridium tip is fragile, never pry it
  • Gap must be checked before fitting

NGK Iridium IX 6509 LTR6IX-11 Spark Plug: what owners report

Owners who mention this plug in listing feedback most often praise the long life and the smooth running after a change. See the NGK Iridium IX 6509 listing and the Comparabo spark plug socket roundup for the rating discussion, and check the part number against your manual.

NGK Iridium IX 6509 LTR6IX-11 Spark Plug: who should not buy

Skip this plug if your engine does not take the LTR6IX-11, because the heat range and the thread must match. A different NGK part number is the right plug there.

NGK Iridium IX 6509 LTR6IX-11 Spark Plug: pair it with

Pair it with a magnetic spark plug socket so the plug cannot drop into the well.

Check Price

We may earn a commission at no cost to you.

Check the gap with a feeler gauge before you fit the plug, because the gap can change in shipping. See our guide on alternatives to ignition coil upgrade kit for more on this.

Best Different Heat Range: NGK BKR5EIX-11 Iridium IX Spark Plug

BEST DIFFERENT HEAT RANGE

Why the NGK BKR5EIX-11 Iridium IX Spark Plug is our pick

The NGK BKR5EIX-11 is the iridium plug for the engine that takes a different heat range than the 6509. The part number is the BKR5EIX-11, an iridium plug with a 5/8-inch hex that fits the engines that call for it. The iridium centre electrode lasts far longer than a copper plug and keeps the spark steady, so the engine runs smoothly for tens of thousands of miles.

The BKR5EIX-11 suits the owner whose manual calls for this part number and who wants a long-life plug. The iridium tip resists wear, the plug comes pre-gapped, and the 5/8-inch hex fits a standard spark plug socket. For a plug change on an engine that takes the BKR5EIX-11, this is the plug to buy.

NGK BKR5EIX-11 Iridium IX Spark Plug key specs

  • Brand NGK
  • Model Iridium IX BKR5EIX-11
  • Part number BKR5EIX-11
  • Centre electrode iridium
  • Hex size 5/8 in
  • Pre-gapped per NGK
  • Long life, 40,000 to 50,000 miles
  • Check the gap before fitting
  • Check the part number against your manual

NGK BKR5EIX-11 Iridium IX Spark Plug: fits and best for

This plug fits owners whose engine takes the NGK BKR5EIX-11 and who want a long-life iridium plug with a 5/8-inch hex.

NGK BKR5EIX-11 Iridium IX Spark Plug pros and watch-outs

Pros

  • Iridium tip lasts far longer than copper
  • Pre-gapped from the factory
  • 5/8-inch hex fits a standard socket
  • Keeps the spark steady
  • Proven NGK design

Watch-outs

  • Must match the BKR5EIX-11 heat range
  • Costs more than a copper plug
  • Iridium tip is fragile, never pry it
  • Gap must be checked before fitting

NGK BKR5EIX-11 Iridium IX Spark Plug: what owners report

Owners who mention this plug in listing feedback most often praise the long life and the smooth running after a change. See the NGK BKR5EIX-11 listing and the CarTreatments spark plug socket sizes guide for the rating discussion, and check the part number against your manual.

NGK BKR5EIX-11 Iridium IX Spark Plug: who should not buy

Skip this plug if your engine does not take the BKR5EIX-11, because the heat range and the thread must match. The NGK 6509 is the right plug for engines that take the LTR6IX-11.

NGK BKR5EIX-11 Iridium IX Spark Plug: pair it with

Pair it with a magnetic spark plug socket so the plug cannot drop into the well.

Check Price

We may earn a commission at no cost to you.

Check the part number on the box before you open it, because a plug with the wrong heat range can overheat. See our guide on best oil additives for small diesel engines for more on this.

Best Socket: GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket

BEST SOCKET

Why the GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket is our pick

The GearWrench 80546 is the spark plug socket most professionals reach for. The 5/8-inch 6-point socket fits the NGK 6509, the magnet holds the plug so it cannot drop, the swivel bends for a tight engine bay, and the 6-inch length reaches a deep well. The 3/8-inch drive fits a standard ratchet.

The 80546 suits the owner who changes plugs on a modern engine with deep wells and tight access. The magnetic hold means the plug goes in and comes out without dropping, and the swivel means the socket reaches a plug at an angle. For a professional plug change, this is the socket to buy.

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket key specs

  • Brand GearWrench
  • Model 80546
  • Drive 3/8 in
  • Points 6
  • Hex size 5/8 in
  • Length 6 in
  • Magnetic hold per GearWrench
  • Swivel joint
  • Fits NGK 6509 and other 5/8 in plugs

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket: fits and best for

This socket fits owners who change spark plugs on a modern engine with deep wells and tight access.

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket pros and watch-outs

Pros

  • Magnet holds the plug, no drops
  • Swivel reaches a plug at an angle
  • 6-inch length reaches a deep well
  • 6-point grip, less rounding
  • GearWrench quality

Watch-outs

  • Costs more than a basic socket
  • 5/8-inch only, not 14 mm
  • Swivel can flex under torque
  • Needs a 3/8-inch ratchet

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket: what owners report

Owners who mention this socket in listing feedback most often praise the magnetic hold and the swivel. See the GearWrench 80546 listing and the Comparabo spark plug socket roundup for the rating discussion, and check the hex size before you buy.

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket: who should not buy

Skip this socket if your engine takes a 14 mm plug, because the 80546 is a 5/8-inch socket. A thin-wall 14 mm socket is the better match there.

GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug Socket: pair it with

Pair it with a torque wrench so the plug is tightened to the maker figure and the thread is not stripped.

Check Price

We may earn a commission at no cost to you.

Turn the plug by hand until it seats, because a plug that is started with a ratchet can cross-thread. See our guide on engine oil vs oil change for more on this.

Best Budget Socket: LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket

BEST BUDGET SOCKET

Why the LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket is our pick

The LEXIVON LX-122 is the budget spark plug socket for the owner who wants a magnetic swivel socket without paying a premium price. The 5/8-inch socket fits the NGK 6509, the magnet holds the plug so it cannot drop, and the swivel bends for a tight engine bay. The socket is built for a deep well, and the LEXIVON name is a guarantee of tool quality.

The LX-122 suits the owner who changes plugs at home and wants a socket that holds the plug. The magnetic hold means the plug goes in and comes out without dropping, and the swivel means the socket reaches a plug at an angle. For a budget magnetic swivel socket, this is the pick that does the job.

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket key specs

  • Brand LEXIVON
  • Model LX-122
  • Hex size 5/8 in
  • Swivel joint
  • Magnetic hold per LEXIVON
  • For deep wells
  • Fits NGK 6509 and other 5/8 in plugs
  • Use with a 3/8-inch ratchet
  • Check the hex size before buying

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket: fits and best for

This socket fits budget-minded owners who change spark plugs at home and want a magnetic swivel socket for a deep well.

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket pros and watch-outs

Pros

  • Magnet holds the plug, no drops
  • Swivel reaches a plug at an angle
  • Lowest-cost magnetic socket here
  • Fits the NGK 6509
  • LEXIVON quality

Watch-outs

  • 5/8-inch only, not 14 mm
  • Swivel can flex under torque
  • No length listed by the maker
  • Costs more than a plain socket

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket: what owners report

Owners who mention this socket in listing feedback most often praise the magnetic hold and the low cost for a swivel socket. See the LEXIVON LX-122 listing and the LEXIVON LX-122 maker page for the rating discussion, and check the hex size before you buy.

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket: who should not buy

Skip this socket if your engine takes a 14 mm plug, because the LX-122 is a 5/8-inch socket. A thin-wall 14 mm socket is the better match there.

LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug Socket: pair it with

Pair it with a torque wrench so the plug is tightened to the maker figure and the thread is not stripped.

Check Price

We may earn a commission at no cost to you.

Turn the plug by hand until it seats, because a plug that is started with a ratchet can cross-thread. See our guide on 20w50 engine oil alternative for more on this.

Best Thin-Wall Socket: ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket

BEST THIN-WALL SOCKET

Why the ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket is our pick

The ARES 11000 is the thin-wall socket for the engine with a narrow plug well, and the reason is the wall. The 14 mm thin-wall socket fits a 14 mm plug in a well that a standard socket cannot enter, the magnet holds the plug so it cannot drop, and the swivel bends for a tight engine bay. The socket is built for the modern engines that use a 14 mm plug in a deep, narrow well.

The 11000 suits the owner whose engine takes a 14 mm plug and whose well is too narrow for a standard socket. The thin wall means the socket enters the well, the magnetic hold means the plug cannot drop, and the swivel means the socket reaches a plug at an angle. For a 14 mm plug in a narrow well, this is the socket to buy.

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket key specs

  • Brand ARES
  • Model 11000
  • Hex size 14 mm
  • Thin wall per ARES
  • Magnetic hold
  • Swivel joint
  • For narrow plug wells
  • Fits 14 mm plugs
  • Use with a 3/8-inch ratchet

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket: fits and best for

This socket fits owners whose engine takes a 14 mm spark plug and whose plug well is too narrow for a standard socket.

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket pros and watch-outs

Pros

  • Thin wall fits a narrow well
  • Magnet holds the plug, no drops
  • Swivel reaches a plug at an angle
  • 14 mm for modern engines
  • ARES quality

Watch-outs

  • 14 mm only, not 5/8-inch
  • Thin wall is less strong than a standard wall
  • Swivel can flex under torque
  • Costs more than a basic socket

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket: what owners report

Owners who mention this socket in listing feedback most often praise the thin wall that fits a narrow well where a standard socket cannot enter. See the ARES 11000 listing and the CarTreatments spark plug socket sizes guide for the rating discussion, and check the hex size before you buy.

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket: who should not buy

Skip this socket if your engine takes a 5/8-inch plug, because the 11000 is a 14 mm socket. A 5/8-inch magnetic socket is the better match there.

ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug Socket: pair it with

Pair it with a torque wrench so the plug is tightened to the maker figure and the thread is not stripped.

Check Price

We may earn a commission at no cost to you.

Check the well diameter before you buy, because a thin-wall socket still needs room to turn. See our guide on best winch dampers long range for more on this.

Spec comparison

ProductDetail
NGK Iridium IX 6509 LTR6IX-11 Spark PlugKey spec: Stock 6509, LTR6IX-11, iridium centre electrode, 5/8 in hex
NGK Iridium IX 6509 LTR6IX-11 Spark PlugBest for: Best Overall
NGK Iridium IX 6509 LTR6IX-11 Spark PlugCheck Price
NGK BKR5EIX-11 Iridium IX Spark PlugKey spec: Part BKR5EIX-11, iridium centre electrode, 5/8 in hex
NGK BKR5EIX-11 Iridium IX Spark PlugBest for: Best Different Heat Range
NGK BKR5EIX-11 Iridium IX Spark PlugCheck Price
GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug SocketKey spec: 3/8 in drive, 6 pt, 5/8 in, 6 in long, magnetic, swivel
GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug SocketBest for: Best Socket
GearWrench 80546 3/8 in Drive 6 Pt 5/8 in x 6 in Magnetic Swivel Spark Plug SocketCheck Price
LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug SocketKey spec: 5/8 in, swivel, magnetic, for deep wells
LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug SocketBest for: Best Budget Socket
LEXIVON LX-122 5/8 in Swivel Magnetic Spark Plug SocketCheck Price
ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug SocketKey spec: 14 mm, thin wall, magnetic, swivel, for narrow wells
ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug SocketBest for: Best Thin-Wall Socket
ARES 11000 14mm Thin Wall Magnetic Swivel Spark Plug SocketCheck Price

Installation and setup basics

Changing a spark plug is a straightforward job you should do on a cool engine. Start by removing the coil or the plug lead, then blow the well clean with compressed air so dirt cannot fall into the cylinder. Fit the plug into the magnetic socket, lower it into the well, and turn it by hand until it seats. Our guides on best winch battery are not the place for engine work, but the same care applies: work on a cool engine, and never force a plug.

Tighten the plug with a torque wrench to the maker figure, then refit the coil or the plug lead. Start the engine and listen for a smooth idle, because a misfire means a plug is loose, a lead is off or a gap is wrong. Check the old plugs for wear and deposits, because they tell you how the engine is running.

Safety essentials

  • Work on a cool engine, because a hot engine burns and a hot plug can crack.
  • Disconnect the battery before you touch the coils, and keep the keys out of the ignition.
  • Blow the well clean before you remove a plug, because dirt in the cylinder damages the engine.
  • Never drop a plug into the well, because the ceramic can crack and the gap can close.
  • Use a torque wrench, because an over-tightened plug can strip the thread.
  • Keep the old plugs for inspection, because they show how the engine is running.

Work on a cool engine and disconnect the battery before you touch the coils, because a hot engine burns and a live coil can shock. Blow the well clean with compressed air before you remove a plug, because dirt that falls into the cylinder can score the bore and damage the engine. Keep the keys out of the ignition, and never force a plug that will not turn, because a cross-threaded plug strips the head.

Use a torque wrench to tighten the plug to the maker figure, because an over-tightened plug can strip the thread and an under-tightened plug can work loose and overheat. Check the gap with a feeler gauge before you fit the plug, and never adjust an iridium plug by prying the electrode, because the iridium tip is fragile and a cracked tip misfires.

Troubleshooting

SymptomCauseFix
Engine misfires after a plug changePlug gap wrong or lead not seatedCheck the gap and reseat the coil or lead
Plug will not turn by handCross-threaded or dirt in the threadRemove the plug, clean the thread and start again by hand
Socket drops the plugPlain socket with no magnet or rubberUse a magnetic or rubber-insert socket
Plug ceramic crackedPlug dropped or over-tightenedReplace the plug and use a torque wrench
Old plug shows oil depositsWorn valve seals or ringsSee a mechanic, a plug change will not fix it
Engine runs rough at idleOne plug not firingCheck the coil and the lead on each cylinder

Who should NOT buy these spark plugs and sockets

Owners whose engine takes a different plug. A spark plug is identified by its part number, and the NGK 6509 is the LTR6IX-11. Check your owner’s manual before you buy, and read our best atv winch guide only if your driving changes.

Owners with a diesel engine. A diesel engine has no spark plugs, so a spark plug change does not apply. Spend the money on the diesel maintenance your engine needs instead.

Owners who will not use a torque wrench. A spark plug tightened by feel can strip the thread or work loose, and both are expensive. Use a torque wrench, or pay a mechanic to do the change.

Owners who want a cheap copper plug. An iridium plug lasts longer than a copper plug, but it costs more. If your engine takes a copper plug and you change plugs often, a copper plug may be the better value.

Final verdict

NGK Iridium IX 6509 LTR6IX-11: the best iridium spark plug for most engines that take a 5/8-inch plug.

NGK BKR5EIX-11 Iridium IX Spark Plug: the best iridium plug for a different heat range.

GearWrench 80546 Spark Plug Socket: the best magnetic swivel socket for a deep well.

LEXIVON LX-122 Spark Plug Socket: the best budget magnetic swivel socket.

ARES 11000 Spark Plug Socket: the best thin-wall socket for a 14 mm plug.

FAQ

What is the NGK Iridium IX 6509?

The NGK Iridium IX 6509 is stock number 6509, which is the LTR6IX-11 spark plug. It is an iridium spark plug with a 5/8-inch hex, and it fits engines that take a 5/8-inch plug with the LTR6IX-11 heat range. The LFR5AIX-11 is a different plug with stock number 4469, so do not confuse the two. Check your owner’s manual before you buy.

What socket do I need for a NGK 6509 spark plug?

The NGK 6509 takes a 5/8-inch spark plug socket, and the socket should be magnetic or rubber-insert so it holds the plug. A 6-inch socket reaches most wells, while a swivel socket helps in a tight engine bay. A plain deep socket will drop the plug, so never use one on a spark plug.

How long do iridium spark plugs last?

An iridium spark plug lasts far longer than a copper plug, because the iridium centre electrode resists wear. NGK Iridium IX plugs are designed to last 40,000 to 50,000 miles, while a copper plug lasts about 20,000 to 30,000 miles. NGK Laser Iridium plugs last longer, at 80,000 to 100,000 miles, so check which series your plug belongs to. Check your owner’s manual for the change interval, because the interval depends on the engine and the plug.

Can I change spark plugs myself?

Yes, a spark plug change is a straightforward job on most engines, and you need a spark plug socket, a ratchet, a torque wrench and a gap gauge. Work on a cool engine, blow the well clean before you remove a plug, and tighten the new plug with a torque wrench. If the plugs are hard to reach or the engine is a tight fit, pay a mechanic.

What is the difference between iridium and copper spark plugs?

An iridium spark plug has an iridium centre electrode that resists wear and lasts longer, while a copper plug has a copper centre electrode that wears faster. An iridium plug keeps the spark steady for longer, so it suits a modern engine with a long change interval. A copper plug is cheaper and suits an older engine with a short change interval.

Why is my engine misfiring after a plug change?

The usual cause is a plug gap that is wrong, a coil or lead that is not seated, or a plug that is loose. Check the gap with a feeler gauge, reseat the coil or lead on each cylinder, and tighten the plug with a torque wrench. A cracked ceramic from a dropped plug can also cause a misfire, so replace any plug that was dropped.

Do I need to gap iridium spark plugs?

NGK Iridium IX plugs come pre-gapped, but you should still check the gap with a feeler gauge before you fit the plug, because the gap can change in shipping. Never adjust an iridium plug by prying the electrode, because the iridium tip is fragile. If the gap is wrong, return the plug and buy another one.

What is a magnetic spark plug socket?

A magnetic spark plug socket has a magnet inside that holds the plug, so you can lower it into a deep well without dropping it. A rubber-insert socket holds the plug with a rubber ring instead. Both are better than a plain deep socket, which will drop the plug and can crack the ceramic. Use a magnetic or rubber-insert socket for every plug change.

More in this field: alternatives to ignition coil upgrade kit, best atv winch, how to use a winch, best winch battery, best winch for jeep wrangler, what size winch do i need, best recovery straps for lifting, best d ring shackles for recovery, best winch dampers long range, best winch dampers for small boats, best heavy duty winch dampers and struts, best oil additives for small diesel engines.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: NGK Iridium IX 6509 LTR6IX-11 Spark Plug

Check Price