Best Charger Pedestals Brands
How we researched this guide
We compared six charger pedestal brands from maker documents and Amazon listings, checking height, material, mounting, and whether each pedestal is sold retail or direct and commercial.
No product here was hands-on tested by WinchInsider. Only two pedestals in this guide have a verified Amazon listing, and both are the same brand: Ufixed. The other brands are sold direct or commercial, so they are covered without Check Price buttons.
The 30-second answer
A charger pedestal is a freestanding post that holds a separately purchased EV charger where no wall is available. Tesla makes the best-documented maker pedestal, a 76-inch aluminium post for Gen 3 Wall Connectors. Ufixed is the only brand with a verified Amazon listing, with two models. ChargePoint, Enel X, and EVOCharge make real pedestals too, but they are commercial or direct products, not Amazon retail picks.
Best maker pedestal
Tesla Tall Pedestal for Wall Connector
A rugged aluminium post, 76 inches tall, for one or two Gen 3 Wall Connectors. Sold through the Tesla shop, with an owner eligibility check. No Amazon listing exists.
No verified Amazon listing was found for this product, so there is no Check Price button here. See the maker page linked in its review below.
Best Amazon pick
Ufixed Weatherproof Pedestal with Roof
Model UEVST-05, a galvanised phosphated metal pedestal with a roof to shield the charger from rain, snow, and sunlight. The only pedestal here with a verified Amazon listing.
Also on Amazon
Ufixed Wallbox Stand
A wallbox stand for Tesla Mobile Connector and J1772 chargers, listed on Amazon with a verified ASIN. Likely an older variant of the same Ufixed line, not an independent brand.
Best commercial
ChargePoint Single or Dual-Sided Pedestal
A commercial pedestal for ChargePoint stations, in single or dual-station preparation, with M16 anchor bolts and a concrete slab. Contractor product, no Amazon listing.
No verified Amazon listing was found for this product, so there is no Check Price button here. See the maker page linked in its review below.
Best complete system
Enel X JuicePedestal
A pedestal that ships with one or two JuiceBox Pro chargers assembled: 74 inches tall, 175 lbs, powder-coated stainless steel, with a 3-year limited warranty. A system, not a standalone post.
No verified Amazon listing was found for this product, so there is no Check Price button here. See the maker page linked in its review below.
Best height choice
EVOCharge Pedestal
A high-strength aluminium pedestal in nominal maximum heights of 4 ft 4 in, 6 ft 4 in, and 8 ft 4 in, for single or dual mount of EVOCharge stations. Maker manual, no Amazon listing.
No verified Amazon listing was found for this product, so there is no Check Price button here. See the maker page linked in its review below.
Quick comparison
| Brand | Product | Height | Material | Channel |
|---|---|---|---|---|
| Tesla | Tall Pedestal | 76 in | Aluminium | Tesla shop |
| Ufixed | Weatherproof, roof | Not published | Galvanised steel | Amazon |
| Ufixed | Wallbox Stand | Not published | Not published | Amazon |
| ChargePoint | Single/Dual Pedestal | Not published | Not published | Commercial |
| Enel X | JuicePedestal | 74 in | Stainless steel | Direct |
| EVOCharge | Pedestal | 4, 6, or 8 ft | Aluminium | Direct |
How to choose a charger pedestal brand
A charger pedestal is only a freestanding mounting post that holds a separately purchased EV charger where no wall is available: a driveway, a parking bay, a carport. It is not a wall charger itself, not a wall-mount holder or cable hook, and not a complete pedestal charging station sold as one commercial unit. Keep that definition in mind, because most products sold as pedestals online are one of those other things.
Charger fit first, pedestal second
Confirm the exact charger model and its mounting-hole pattern before buying any post. Universal posts still need the right bracket or plate. Tesla pedestal fits only Gen 2 and Gen 3 and Universal Wall Connectors, ChargePoint pedestal fits its own stations, and Ufixed fitment is claimed only for Tesla Mobile Connector and J1772 chargers in listing copy. A universal claim on a listing is not a fitment guarantee.
Single vs dual
Tesla, ChargePoint, EVOCharge, JuicePedestal, and EV Charge Solutions all offer dual or larger configurations, but dual changes conduit, circuits, and mounting rules. For the Tesla tall pedestal, only front-and-back dual mounted applications are acceptable: do not centre it between two parking stalls for dual side-by-side charging.
Foundation and wiring
Tesla and ChargePoint both require a concrete pad or foundation, and Tesla installations typically require trenching. ChargePoint specifies M16 anchor bolts and a concrete slab at least 2 ft on all sides. A bolt-to-deck stand is not the same as a code-compliant pedestal install. An electrician must confirm the footing, conduit entry, and conductor length before ordering.
Mounting height and access
Vendor guides cite NEC height guidance of 24 inches minimum outdoors and 18 inches indoors for the charger itself, and the EVOCharge manual cites ADA recommended connector height below 48 inches and above 24 inches. Height of the post is not the same as height of the connector: check both.
What is not included
Tesla pedestals exclude the Wall Connector and installation. ChargePoint pedestals are ordered separately from the station. JuicePedestal bundles chargers, which is the exception. Always check the exclusion list before ordering, because the pedestal is only the post.
Best maker pedestal: Tesla Tall Pedestal for Wall Connector
Best maker pedestal
Why the Tesla Tall Pedestal for Wall Connector is our pick
The Tesla Tall Pedestal is the best-documented maker pedestal in this guide. It is a rugged aluminium post, 76 inches tall in the tall version, for single and dual mounted configurations, so one or two vehicles can charge at the same time. It is compatible with all Gen 3 Wall Connectors and the Universal Wall Connector, and includes one pedestal, two cable brackets, four wire glands, and four mounting screws for securing the Wall Connector to the pedestal. The Wall Connector and installation are not included, and installation typically requires trenching and a concrete pad. Tesla says to consult a local contractor, and that each installation is unique to the site. A shorter standard Pedestal for Wall Connector also exists for Gen 2 and Gen 3. Tesla shop pages state a Tesla-vehicle-owner eligibility check, so a non-owner cannot simply buy it like a retail stand. No Amazon listing was found, so there is no Check Price button here.
Tesla Tall Pedestal for Wall Connector key specs
- Rugged aluminium post
- Pedestal height: 76 inches (tall version)
- Single and dual mounted configurations
- Compatible with Gen 3 and Universal Wall Connectors
- Includes 2 cable brackets, 4 wire glands, 4 mounting screws
- Wall Connector and installation not included
- Installation typically requires trenching and concrete pad
- Not published: load rating, IP rating, warranty length, anchor-bolt specification
Tesla Tall Pedestal for Wall Connector: fits and best for
Best for Tesla owners who need a freestanding mount for a Gen 3 or Universal Wall Connector in a driveway or parking bay with no wall.
Tesla Tall Pedestal for Wall Connector pros and watch-outs
- Best-documented maker pedestal in this guide
- Aluminium post, dual-mount option
- Cable brackets included
- Tesla shop only, with an owner eligibility check
- No Amazon listing
- No published IP rating or warranty length
- Installation needs trenching and a concrete pad
Tesla Tall Pedestal for Wall Connector: what owners report
No owner-report source with retrievable text was found for this pedestal in our research. Tesla shop copy is the only evidence used here, and it is maker copy, not owner experience.
Tesla Tall Pedestal for Wall Connector: who should not buy
Do not buy this if you do not own a Tesla, or if your charger is not a Gen 2, Gen 3, or Universal Wall Connector. It will not fit other chargers.
Maker page: Tesla shop: Tall Pedestal for Wall Connector
We may earn a commission at no cost to you.
Confirm the dual-mount rule with your contractor before ordering: only front-and-back dual mounting is acceptable.
Best Amazon pick: Ufixed Weatherproof Pedestal with Roof
Best Amazon pick
Why the Ufixed Weatherproof Pedestal with Roof is our pick
The Ufixed Weatherproof Pedestal with Roof, model UEVST-05, is the only pedestal in this guide with a verified Amazon listing and the best retail buy for a reader who needs a pedestal this week. The listing describes galvanised phosphated metal construction and a top cover or roof to shield the charger from rain, snow, and direct sunlight, for indoor and outdoor use in driveways and parking spaces without a nearby wall. Expansion bolts and screws are included. The listing claims compatibility with Tesla Mobile Connector and J1772 chargers, and describes it for Tesla Gen3 charging stations, but its own wording is inconsistent, mentioning Wall Connector in keyword copy, so Wall Connector fitment should not be claimed from this listing alone. The listing gives no usable pedestal height, load rating, IP rating, or warranty, so none is printed here. The Amazon page references an Installation Manual PDF, but that document was not retrieved in our research.
Ufixed Weatherproof Pedestal with Roof key specs
- Model UEVST-05
- Galvanised phosphated metal (listing claim)
- Top cover or roof for rain, snow, sunlight
- Indoor and outdoor use
- Expansion bolts and screws included
- Item weight 10.98 lbs (listing field)
- Compatibility claimed: Tesla Mobile Connector, J1772
- Not published: pedestal height, load rating, IP rating, warranty
Ufixed Weatherproof Pedestal with Roof: fits and best for
Best for readers who need a retail pedestal quickly for a Tesla Mobile Connector or J1772 charger, in a driveway or parking space with no wall.
Ufixed Weatherproof Pedestal with Roof pros and watch-outs
- Only pedestal here with a verified Amazon listing
- Roof shields the charger from weather
- Expansion bolts included
- Indoor and outdoor use
- Listing claims only, no maker document retrieved
- No published height, load rating, or IP rating
- Compatibility wording is inconsistent
- Item weight is a listing field, not a pedestal spec
Ufixed Weatherproof Pedestal with Roof: what owners report
No owner-report source with retrievable text was found for this pedestal. The listing shows a Customer Installations and Benefits video label, but no citable owner text was retrieved.
Ufixed Weatherproof Pedestal with Roof: who should not buy
Do not buy this for a Tesla Wall Connector on the strength of the listing alone. Confirm fitment with the seller first.
We may earn a commission at no cost to you.
Measure your charger mounting pattern against the listing photos before ordering, because no height figure is published.
Also on Amazon: Ufixed Wallbox Stand
Also on Amazon
Why the Ufixed Wallbox Stand is our pick
The Ufixed Wallbox Stand for Mobile Wallbox Tesla Charging Station is the second Ufixed pedestal with a verified Amazon listing, ASIN B0DJ11WYT6, first available November 28, 2024. The listing states indoor and outdoor application, home and commercial use, expansion bolts and screws, and a Waterproof: Yes claim in its comparison table, with no IP rating given. Compatibility is listed as Tesla and J1772 charger. The same page states a Newer Version Available pointing to the Ufixed Weatherproof Pedestal with Roof, which suggests this is an older variant of the same product line, not an independent pick. The listed dimensions of 17.33 by 10 by 7 inches are ambiguous: the page does not make clear whether they describe the stand or its package, so they are not presented here as pedestal height.
Ufixed Wallbox Stand key specs
- ASIN B0DJ11WYT6
- Date first available: November 28, 2024
- Indoor and outdoor application
- Home and commercial use
- Expansion bolts and screws
- Waterproof: Yes (listing claim, no IP rating)
- Compatibility listed: Tesla and J1772 charger
- Not published: pedestal height, load rating, IP rating, warranty, maker document
Ufixed Wallbox Stand: fits and best for
Best for readers who want the Ufixed line at a lower price point, if the older variant suits their charger.
Ufixed Wallbox Stand pros and watch-outs
- Verified Amazon listing
- Indoor and outdoor use
- Expansion bolts included
- Likely an older variant of the same Ufixed line
- Dimensions ambiguous: stand or package unclear
- No maker document retrieved
- No published height or IP rating
Ufixed Wallbox Stand: what owners report
No owner-report source with retrievable text was found for this pedestal in our research.
Ufixed Wallbox Stand: who should not buy
Do not count this and the Ufixed roof model as two brands. They are one brand and likely one product line.
We may earn a commission at no cost to you.
Check the Newer Version link on the listing before ordering, to see whether the roof model fits your site better.
Best commercial: ChargePoint Single or Dual-Sided Pedestal
Best commercial
Why the ChargePoint Single or Dual-Sided Pedestal is our pick
The ChargePoint Single or Dual-Sided Pedestal is a commercial pedestal for ChargePoint stations, in single-station or two-station preparation from the same pedestal kit. The Home Flex install guide confirms Flex stations can be mounted on a wall or on a pedestal ordered separately. The installation guide lists pedestal, top cover, pedestal base, screws, four M16 by 2.0 by 140 mm expansion anchor bolts, foam rings, and a protective plate. The ground conductor is 8 AWG maximum, with conductor length from the base at least 1.3 m or 51 inches. The CP6000 mounting detail specifies a concrete slab minimum 2 ft on all sides, M16 anchor bolts, and a 1.25-inch trade-size knockout. This is a commercial and contractor product with no Amazon listing, so there is no Check Price button here.
ChargePoint Single or Dual-Sided Pedestal key specs
- Single or dual-station preparation
- Pedestal, top cover, base, screws, foam rings, protective plate
- 4x M16 x 2.0 x 140 mm expansion anchor bolts
- Ground conductor: 8 AWG maximum
- Conductor length from base: at least 1.3 m (51 in)
- Concrete slab minimum 2 ft on all sides
- Not published: retail pedestal height or weight, consumer warranty, Amazon listing
ChargePoint Single or Dual-Sided Pedestal: fits and best for
Best for commercial sites and contractors installing ChargePoint stations where no wall is available.
ChargePoint Single or Dual-Sided Pedestal pros and watch-outs
- Strongest universal-ish maker pedestal after Tesla
- Single or dual-station kit
- Detailed maker installation documentation
- Commercial and contractor product, not retail
- No Amazon listing
- No published consumer warranty
- Installer-level detail, not a DIY buy
ChargePoint Single or Dual-Sided Pedestal: what owners report
No owner-report source with retrievable text was found for this pedestal in our research. The evidence is maker documentation, not owner experience.
ChargePoint Single or Dual-Sided Pedestal: who should not buy
Do not buy this as a home retail pedestal. It is a commercial product ordered through ChargePoint channels.
Maker page: ChargePoint CP6000 pedestal mounting details
We may earn a commission at no cost to you.
Have an electrician confirm the footing, conduit entry, and conductor length before ordering.
Best complete system: Enel X JuicePedestal
Best complete system
Why the Enel X JuicePedestal is our pick
The Enel X JuicePedestal is a pedestal that ships with one or two JuiceBox Pro chargers assembled to the unit, so it is a complete system, not a standalone empty post. The datasheet gives a height of 74 inches or 188 cm, a width of 19.88 inches by 8.00 inches deep, and a weight of 175 lbs or 79.38 kg without charging units, adding 15 to 17 lbs per JuiceBox. It is powder-coated stainless steel, ground-mounted with four bolts, with a concrete pad recommended, and a retractable weight-pulley cable management system. Power configurations run through the JuiceBox units: 32A or 7.7 kW, 40A or 9.6 kW, 48A or 11.2 kW, and 80A or 19.2 kW, single-phase 208 to 240 VAC at 60 Hz, with 20 ft or 6.1 m cables and a J1772 plug. The datasheet claims UL, cUL, and ENERGY STAR compliance, and a 3-year limited warranty with an optional two additional years. No Amazon listing was found, and current retail availability should be confirmed, because Enel X North America consumer support status has changed since the 2024 datasheet.
Enel X JuicePedestal key specs
- Height 74 in / 188 cm
- Width 19.88 in / 50.50 cm, depth 8.00 in / 20.32 cm
- Weight 175 lbs / 79.38 kg without charging units
- Powder-coated stainless steel
- Ground-mounted with 4 bolts, concrete pad recommended
- Retractable weight-pulley cable management
- Power 32A to 80A, 7.7 to 19.2 kW
- 3-year limited warranty, optional 2 additional years
Enel X JuicePedestal: fits and best for
Best for commercial sites that want a complete pedestal charging system with chargers included, rather than a bare post.
Enel X JuicePedestal pros and watch-outs
- Complete system with chargers included
- Detailed maker datasheet
- Retractable cable management
- 3-year warranty
- Not a standalone pedestal
- No Amazon listing
- Availability since the 2024 datasheet should be confirmed
- Heavy at 175 lbs before chargers
Enel X JuicePedestal: what owners report
No owner-report source with retrievable text was found for this product in our research.
Enel X JuicePedestal: who should not buy
Do not buy this as a bare pedestal for an existing charger. It ships with JuiceBox chargers assembled.
Maker page: Enel X JuicePedestal datasheet
We may earn a commission at no cost to you.
Confirm current availability with Enel X before planning a site around it.
Best height choice: EVOCharge Pedestal
Best height choice
Why the EVOCharge Pedestal is our pick
The EVOCharge Pedestal, part number 701039, is a high-strength aluminium pedestal in nominal maximum heights of 4 ft 4 in, 6 ft 4 in, and 8 ft 4 in, in grey. It is suitable for single or dual mount of EVOCharge charging stations, EVOREELs, or a retractor, with cable management through a connector and cable holster as standard, and a retractor and pedestal optional. The charger-unit specs in the bulletin are for context only, not pedestal specs: SAE J1772, AC Level 2, 32A or 7.68 kW maximum, 208 to 240 VAC, NEMA 4 charger rating, and an operating range of minus 22 degrees F to 122 degrees F for the EVSE. No Amazon listing was found, and the manual is from 2021, so current availability should be confirmed before planning around it.
EVOCharge Pedestal key specs
- Part no. 701039
- High-strength aluminium, grey
- Nominal maximum heights: 4 ft 4 in, 6 ft 4 in, 8 ft 4 in
- Single or dual mount of EVOCharge stations
- Cable holster standard, retractor optional
- Not published: pedestal weight, anchor specification, warranty, Amazon listing
EVOCharge Pedestal: fits and best for
Best for sites that need a choice of pedestal heights, and for EVOCharge station owners.
EVOCharge Pedestal pros and watch-outs
- Three height options
- High-strength aluminium
- Single or dual mount
- Maker manual with installation detail
- No Amazon listing
- Manual from 2021, availability should be confirmed
- No published weight or warranty
EVOCharge Pedestal: what owners report
No owner-report source with retrievable text was found for this pedestal in our research.
EVOCharge Pedestal: who should not buy
Do not buy this for a non-EVOCharge charger without confirming the mounting pattern first.
Maker page: EVOCharge pedestal installation and user manual
We may earn a commission at no cost to you.
Pick the height by the connector height rule: below 48 inches and above 24 inches for the connector, per ADA guidance cited in the manual.
Brands that did not make the picks list
EV Charge Solutions makes universal EV charger pedestals for single, dual, or up to four-charger installations, with optional cable management and cycle testing described as simulating 10 years of use, but no dimensions, weight, ASIN, or retail listing were found, so it is context only. Barkan makes the EV140FC 57-inch universal EV charger stand, zinc-coated with UV additives, supporting up to 110 lbs with safety testing to 330 lbs, but it was found on Woot, not Amazon, with no Amazon ASIN. Legrand makes a commercial EV charger cable management pedestal, part numbers XEVPEDCM1, XEVPEDCM2, and XEVPEDCM3, which is not UL listed and mounts two forward-facing units only. Easee Base, Ratio Universal Base, and Gyroplastics mounting posts are real pedestals, but they are EU and New Zealand market products with no US Amazon listing. Do not convert a Woot listing, a wholesale listing, or a charger listing into an Amazon pedestal pick: the BMZX Pedestal Base ASIN is a wall-mount holder, not a pedestal, and Lectron, TESSAN, AIMILER, and EVIQO listings are chargers, not pedestals.
Final verdict
Best maker pedestal: Tesla Tall Pedestal, 76 inches of aluminium for Gen 3 Wall Connectors, sold through the Tesla shop. Best Amazon pick: Ufixed Weatherproof Pedestal with Roof, the only pedestal here with a verified Amazon listing. Best commercial: ChargePoint Single or Dual-Sided Pedestal. Best complete system: Enel X JuicePedestal. Best height choice: EVOCharge Pedestal. Confirm charger fit, foundation, and electrician requirements before ordering any pedestal.
FAQ
What is an EV charger pedestal?
A freestanding post that holds a separately purchased EV charger where no wall is available, such as a driveway, parking bay, or carport. It is not a charger, a wall-mount holder, or a complete charging station.
Will a universal pedestal fit my charger?
Not necessarily. Confirm the exact charger model and its mounting-hole pattern first. Tesla pedestals fit only Gen 2, Gen 3, and Universal Wall Connectors, ChargePoint pedestals fit its own stations, and Ufixed fitment is claimed only for Tesla Mobile Connector and J1772 chargers.
Can one pedestal charge two cars?
Yes, with the right kit. Tesla, ChargePoint, EVOCharge, JuicePedestal, and EV Charge Solutions all offer dual or larger configurations, but dual changes conduit, circuits, and mounting rules. For the Tesla tall pedestal, only front-and-back dual mounting is acceptable.
What foundation does a pedestal need?
Tesla and ChargePoint both require a concrete pad or foundation, and Tesla installations typically require trenching. ChargePoint specifies M16 anchor bolts and a concrete slab at least 2 ft on all sides. An electrician must confirm the footing and conduit entry.
Does the pedestal include the charger?
Usually not. Tesla pedestals exclude the Wall Connector and installation, and ChargePoint pedestals are ordered separately from the station. JuicePedestal is the exception: it ships with JuiceBox chargers assembled.
Can I buy a Tesla pedestal on Amazon?
No. No Amazon listing was found for the Tesla pedestal. It is sold through the Tesla shop, with a Tesla-vehicle-owner eligibility check.
Is a roof the same as weatherproofing?
No. A roof shields the charger from rain, snow, and sunlight, but it is not an IP weatherproofing rating. No IP rating was found for the Tesla or Ufixed pedestals in our research, so do not assume one.
Do I need an electrician for a pedestal?
Yes. A pedestal install needs a concrete foundation, conduit, and correct conductor length and grounding. Have an electrician confirm the footing, conduit entry, and conductor length before ordering, and the mounting height of the connector as well.
Why are most real pedestals commercial, not Amazon retail?
Because pedestals are infrastructure: they need a foundation, trenching, and an electrician, and they are sold through maker and commercial channels. The only brand with a verified Amazon listing in our research is Ufixed.
What is the difference between a pedestal, a stand, and an RV power pedestal?
A pedestal is a freestanding post for an EV charger. A stand can be the same thing or a smaller desk-style holder, so check the product, not the name. An RV or marina power pedestal is shore power for a vehicle or boat, a different product category.
Sources
Tesla shop: Tall Pedestal for Wall Connector
Amazon listing: Ufixed Weatherproof Pedestal with Roof, model UEVST-05
Amazon listing: Ufixed Wallbox Stand
ChargePoint CP6000 pedestal mounting details
Enel X JuicePedestal datasheet
EVOCharge pedestal installation and user manual
EV Charge Solutions: EV charging pedestals
Woot: Barkan EV140FC 57-inch universal EV charger stand
Solus Group: choosing an EV charger stand, 5 questions to ask
By Leo, Founder, WinchInsider
Leo researches and writes buying guides from maker specifications, manuals, and owner reports. This guide is research-based: no product here was hands-on tested by WinchInsider.