The 30-second answer
The right bearing puller kit depends on the bearing you are removing, not on the size of the box. The Orion Motor Tech 24-Piece Press Kit is the general front-wheel-drive pick, the Orion 38-Piece 2-in-1 Kit is the most complete press and separator set here, the Orion Rear Axle Kit with slide hammer is the rear-axle pick, the OTC 7394 Universal Hub Puller is the dedicated hub pick, the OTC 522 Large Gear and Pulley Puller is the heavy jaw puller, and the Blind Hole Bearing Puller Set is the pilot-bearing and blind-hole pick.
How we researched this guide
We compared 6 products from Amazon listing evidence retrieved in November 2026: 2 press kits, 1 rear-axle slide-hammer kit, 1 hub puller, 1 jaw puller, and 1 blind-hole set. We checked each listing’s maker-stated contents and range separately, and flagged every specification that was missing, variant-only, or inconsistent between listings.
Alongside the listings we reviewed maker tool guides, a bearing-removal reference, and owner and forum threads on puller fitment and thread damage. No product here is presented as tested by us, and no specification below comes from anywhere other than those sources. Internal links go to already-published WinchInsider guides and to this article’s category archives.
Best general press kit
Orion Motor Tech 24-Piece Wheel Bearing Press Kit
A 24-piece front-wheel-drive bearing removal and installation kit with sliding screws, bushings, and sleeves in a storage case.
Most complete set
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit
A 38-piece 2-in-1 kit combining a front wheel bearing press set with a 5-ton bearing separator puller set with 2 inch and 3 inch jaws.
Best rear-axle kit
Orion Motor Tech Rear Axle Bearing Puller Kit
A rear-axle bearing puller and slide-hammer set with 3 pullers covering bearing and axle inner diameters from 1-1/4 inch to 2-7/8 inch.
Best dedicated hub puller
OTC 7394 Universal Hub Puller
A universal hub puller from OTC Tools for removing hubs where a dedicated puller beats a general kit’s compromise.
Best heavy jaw puller
OTC 522 Large Gear and Pulley Puller
A large gear and pulley puller from OTC for gears, pulleys, and bearings that a jaw puller can grip from the outside.
Best blind-hole set
Blind Hole Bearing Puller Set 12-Piece
A 12-piece blind-hole puller set for pilot bearings, seals, and bearings seated in a hole with no through access.
Quick compare: bearing puller kits at a glance
| Product | Type | Published rating | Size | Check Price |
|---|---|---|---|---|
| Orion Motor Tech 24-Piece Wheel Bearing Press Kit | Press kit | 24 pieces | FWD hub kit | Check Price |
| Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit | Press + separator | 38 pieces | 2 and 3 in jaws | Check Price |
| Orion Motor Tech Rear Axle Bearing Puller Kit | Slide hammer kit | 1-1/4 to 2-7/8 in | Axle IDs | Check Price |
| OTC 7394 Universal Hub Puller | Hub puller | Universal hub | Hub applications | Check Price |
| OTC 522 Large Gear and Pulley Puller | Jaw puller | Large gear/pulley | Gear applications | Check Price |
| Blind Hole Bearing Puller Set 12-Piece | Blind-hole puller | 12 pieces | Pilot bearings | Check Price |
Read the range column as the job each kit actually covers. A kit that covers everything on paper usually covers one job well and the rest poorly; the reviews below say which job each kit owns.
Bearing job finder
Enter the bearing’s approximate bore size and the job type. Every result points at a pick from this guide with its button.
How to choose a bearing puller kit
Name the bearing’s situation, not just its size
A bearing pressed into a knuckle, a bearing on a flanged axle, a bearing in a blind hole, and a gear on a shaft are four different jobs. Size matters, but access matters more: a press kit cannot work where there is no back side, and a jaw puller cannot grip a flush bearing. Identify the situation first.
Match the method to the access
Press kits push, separators lift from behind, slide hammers impact-pull, jaw pullers grip outside, and blind-hole pullers expand inside. Each method owns one access case and fails the others. Buying the method for your access case beats buying the biggest box.
Check the range against your actual bearing
Kits publish ranges: inner diameters for axle pullers, jaw sizes for separators, bore sizes for blind-hole collets. Measure your bearing before ordering, and confirm the kit covers it with margin. A kit that almost fits is a kit that slips or cocks.
Count installation, not just removal
Removing a bearing is half the job. Press kits that also install the new bearing save a second purchase and a second setup, while puller-only kits leave installation to improvised methods. If you do hub jobs, favour a kit that presses in as well as out.
Weigh storage against completeness
A 38-piece kit covers more jobs but needs a case, shelf space, and organisation. A dedicated puller is faster for one job type but useless for others. Buy the completeness you will actually use, not the completeness that impresses on a shelf.
Protect the shaft and the housing
Every pulling method can damage what it saves if misused: a cocked press scores a bore, a slipping jaw gouges a shaft, a violent slide hammer peens a surface. Load slowly, keep pulls straight, and inspect the shaft and housing before fitting the new bearing.
Bearing puller kits by budget
No prices appear in this guide. The tiers rank by job coverage and by how completely the kit solves its job, not by cost.
| Tier | What you get | Example pick |
|---|---|---|
| Single blind job | The only method for a pilot bearing | Blind Hole Puller Set |
| Single hub job | A press kit that removes and installs | Orion 24-Piece Press Kit |
| Repeated hub work | A dedicated puller for hubs | OTC 7394 Hub Puller |
| Gear and pulley work | A large jaw puller for exposed parts | OTC 522 Puller |
| Axle work | Slide-hammer pulling for flanged axles | Orion Rear Axle Kit |
| Maximum coverage | Press plus separator in one box | Orion 38-Piece 2-in-1 Kit |
Start with the tier matching your next job, not the largest tier. A 38-piece kit is wasted on one hub job, and a press kit is wasted on a blind hole.
Types of bearing puller compared
Five methods cover nearly every bearing removal. The table states each method’s character, including where it fails.
| Type | Strengths | Watch out | Best for |
|---|---|---|---|
| Press kit | Removes and installs; controlled force | Needs back-side access and room | Hub bearings in knuckles |
| Separator | Lifts bearings from behind | Needs jaw clearance behind bearing | Shaft bearings |
| Slide hammer | Pulls where a press cannot reach | Impact force needs control | Rear-axle bearings |
| Jaw puller | Grips exposed parts from outside | Needs an outside edge to grip | Gears and pulleys |
| Blind-hole puller | Pulls from inside the bore | Small-bore range only | Pilot bearings |
Why the wrong puller damages more than the bearing
A bearing puller fails most often not by breaking but by being the wrong method for the access case. The classic damage is a press kit used where there is no back side: force goes somewhere, and it goes into the housing, the shaft, or the new bearing. The second classic is a jaw puller on a bearing with nothing to grip, which slips, gouges, and then gets forced harder. Both failures share one cause: the method was chosen from the size of the box rather than the shape of the job.
The discipline that prevents this is boring and effective: name the bearing’s situation before shopping. Is it pressed into a knuckle, on a flanged axle, in a blind hole, or on an exposed shaft? Each answer points to one method, and the kit reviews in this guide are organised around those answers. Measure the bearing, confirm the kit’s range covers it, and check whether the kit also installs the new bearing, since removal is only half the job.
The third discipline is force control. Press slowly and check alignment, slide with short controlled strokes, seat jaws evenly, and size collets to the bore. A puller used patiently preserves the shaft and housing that the new bearing depends on; a puller used violently creates a second repair. Inspect both surfaces before fitting the new bearing, and replace seals that were disturbed during removal.
Detailed reviews: bearing puller kits
Each review below follows the same order: why it is a pick, its published specifications, where it fits, what owners report, who should not buy it, and what to pair it with.
Best general press kit: Orion Motor Tech 24-Piece Wheel Bearing Press Kit
Best general press kit
Why the Orion Motor Tech 24-Piece Wheel Bearing Press Kit is our pick
This is the kit most home mechanics reach for first on a front-wheel-drive hub bearing, because it presses the bearing out and the new one in without removing the steering knuckle in many jobs. The set’s sliding screws, bushings, and sleeves cover the common hub sizes, and the case keeps a large set organised. Its weakness is the same as any press kit: it needs room to work and a solid reaction point, and it cannot pull a bearing that has no lip or shoulder to press against.
Orion Motor Tech 24-Piece Wheel Bearing Press Kit key specs
- Brand: Orion Motor Tech
- Pieces: 24
- Type: wheel bearing press kit
- Drive: front-wheel-drive applications
- Includes: sliding screws, bushings, sleeves
- Storage: case included
- Use: removal and installation
- Material: Not published on retrieved listing
- Jaw type: press, not jaw puller
- Slide hammer: not included
- Part number: Not published on retrieved listing
- Warranty: Not published on retrieved listing
Orion Motor Tech 24-Piece Wheel Bearing Press Kit: fits and best for
Best for front-wheel-drive cars and light trucks where the hub bearing presses in and out of the knuckle. It fits owners doing their own hub jobs in a home garage, and it is not the tool for blind holes or rear-axle bearings, which need the kits below.
Orion Motor Tech 24-Piece Wheel Bearing Press Kit pros and watch-outs
- Presses out and in, so one kit covers both directions
- Bushings and sleeves cover common hub sizes
- Case keeps 24 pieces organised
- Avoids knuckle removal on many jobs
- Needs room and a solid reaction point
- Cannot grip a bearing with no lip to press
- No slide hammer for stubborn axle bearings
- Press alignment must be checked or the new bearing can cock
Orion Motor Tech 24-Piece Wheel Bearing Press Kit: what owners report
Owners doing hub jobs report the kit paying for itself on the first use compared with shop labour, and they credit the sleeve range for fitting their car without extra purchases. (See owner reviews for this pick.)
Several owners warn that pressing a new bearing in crooked ruins it, and they check alignment twice before applying force.
Storage reports are mixed: the case is convenient but heavy when full, and owners advise keeping the screws oiled.
Orion Motor Tech 24-Piece Wheel Bearing Press Kit: who should not buy
Do not buy this for blind-hole pilot bearings or rear-axle bearings. Those jobs need a blind-hole puller or a slide-hammer kit, not a press set.
Orion Motor Tech 24-Piece Wheel Bearing Press Kit: pair it with
Pair it with a torque wrench for reassembly, since hub nuts and knuckle bolts have published torque values that a press kit cannot set.
We may earn a commission at no cost to you.
Oil the forcing screw threads before every press; dry threads gall and give a false sense of resistance. See our bearing puller suppliers guide for kit ranges.
Most complete set: Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit
Most complete set
Why the Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit is our pick
This is the most complete set in the guide because it pairs two different pulling methods: a press kit for hub bearings and a separator puller for bearings that must be split off a shaft. The separator’s jaws close behind a bearing and lift it where a press has nothing to push against, which is exactly the job that defeats a press-only kit. The trade-off is size and weight: 38 pieces take storage space, and the separator needs jaw clearance behind the bearing.
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit key specs
- Brand: Orion Motor Tech
- Pieces: 38
- Type: 2-in-1 press and separator kit
- Separator rating: 5 ton (listing)
- Separator jaws: 2 inch and 3 inch
- Material: AISI 1045 steel (listing)
- Includes: sliding screws, sleeves, separator, puller legs
- Storage: case included
- Use: removal and installation
- Drive: front-wheel-drive applications
- Part number: ATL-2414-00
- Warranty: Not published on retrieved listing
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit: fits and best for
Best for owners who face both hub bearings and shaft bearings, and who want one purchase to cover both. It fits home garages with storage room and DIYers who do suspension and drivetrain work, not just one hub job.
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit pros and watch-outs
- Two methods in one box: press and separator
- 5-ton separator handles shaft bearings a press cannot
- AISI 1045 steel construction stated on the listing
- Jaw sizes cover common bearing diameters
- Large and heavy to store
- Separator needs clearance behind the bearing
- More pieces means more to keep track of
- Separator jaws must sit square or they slip
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit: what owners report
Owners report the separator as the reason they upgraded from a press-only kit, after a shaft bearing defeated their first set. (See owner reviews for this pick.)
Several owners note the case is essential, since loose separator jaws are easily lost in a busy garage.
Press users describe the same alignment caution as with any press kit: check twice, press once.
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit: who should not buy
Do not buy this if you have one hub job and no storage space. The 24-piece kit above covers that job with a smaller box.
Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit: pair it with
Pair it with a slide-hammer kit for rear-axle bearings, since even this set’s separator cannot replace a slide hammer on a flanged axle.
We may earn a commission at no cost to you.
Seat separator jaws fully behind the bearing before loading; a half-seated jaw slips and damages the shaft. See our mechanics tool set guides for supporting tools.
Best rear-axle kit: Orion Motor Tech Rear Axle Bearing Puller Kit
Best rear-axle kit
Why the Orion Motor Tech Rear Axle Bearing Puller Kit is our pick
Rear-axle bearings defeat press kits because the axle flange leaves nowhere to press from, and that is what a slide hammer solves: repeated impact pulls the bearing straight off the shaft. This set’s three pullers cover inner diameters from 1-1/4 inch to 2-7/8 inch, which spans the common rear-axle range, and the slide-hammer yoke converts hammer blows into a straight pull. Its limit is force control: a slide hammer is impact, not steady pressure, and it rewards patience over enthusiasm.
Orion Motor Tech Rear Axle Bearing Puller Kit key specs
- Brand: Orion Motor Tech
- Type: rear axle bearing puller with slide hammer
- Pullers: 3
- Inner diameter range: 1-1/4 to 2-7/8 inch
- Includes: slide hammer yoke and adapters
- Model: Rear Axle Bearing Puller
- Item model number: RA0700
- Manufacturer part number: RA07-00
- Use: axle seal and bearing removal
- Press function: no
- Storage: Not published on retrieved listing
- Warranty: Not published on retrieved listing
Orion Motor Tech Rear Axle Bearing Puller Kit: fits and best for
Best for rear-wheel-drive cars and trucks with flanged axles, and for axle seal jobs that come with the bearing. It fits owners comfortable with impact pulling, and it is not the tool for delicate press fits or blind holes.
Orion Motor Tech Rear Axle Bearing Puller Kit pros and watch-outs
- Slide hammer pulls where a press cannot reach
- Three pullers span the common axle range
- Yoke keeps the pull straight on the shaft
- Covers seals as well as bearings
- Impact pulling needs control; haste damages shafts
- No press function for installation
- Adapters must match the axle diameter exactly
- Slide hammer work is loud and needs space
Orion Motor Tech Rear Axle Bearing Puller Kit: what owners report
Owners report this kit as the only thing that moved axle bearings a press kit could not touch, and they credit the adapter range for fitting without modification. (See owner reviews for this pick.)
Several owners warn that short, sharp slides beat long violent ones, and that patience protects the axle surface.
Axle-seal users describe doing seal and bearing together as the sensible job, since the labour overlaps.
Orion Motor Tech Rear Axle Bearing Puller Kit: who should not buy
Do not buy this for front hub bearings or blind holes. A press kit or blind-hole set fits those jobs, and a slide hammer is the wrong force for them.
Orion Motor Tech Rear Axle Bearing Puller Kit: pair it with
Pair it with new axle seals, since the seal usually comes out with the bearing and reusing a disturbed seal invites leaks.
We may earn a commission at no cost to you.
Use short, controlled slides and check the pull stays straight; a cocked pull scores the shaft. See our bearing puller suppliers guide for axle ranges.
Best dedicated hub puller: OTC 7394 Universal Hub Puller
Best dedicated hub puller
Why the OTC 7394 Universal Hub Puller is our pick
A dedicated hub puller earns its place when a general kit’s adapter almost fits but does not: hub geometry varies, and a puller shaped for hubs seats where a flat press plate rocks. The OTC 7394 is listed as a universal hub puller, made in the USA on the retrieved listing, and it suits owners who do repeated hub work rather than a single job. Its limit is scope: it pulls hubs, and it does not press bearings, split shafts, or reach blind holes.
OTC 7394 Universal Hub Puller key specs
- Brand: OTC Tools
- Model: 7394
- Type: universal hub puller
- Country of origin: USA (listing)
- Manufacturer part number: 7394
- Weight: 4.17 kg (listing)
- Use: hub removal
- Press function: no
- Separator function: no
- Slide hammer: no
- Storage: Not published on retrieved listing
- Warranty: Not published on retrieved listing
OTC 7394 Universal Hub Puller: fits and best for
Best for owners who do hub work regularly and want a dedicated tool rather than a kit compromise. It fits professional and serious home garages, and it is not a substitute for a press kit on installation.
OTC 7394 Universal Hub Puller pros and watch-outs
- Dedicated hub geometry seats securely
- OTC professional tool lineage
- Simpler than a 38-piece kit for one job type
- Made in USA on the retrieved listing
- Single-purpose: hubs only
- No installation or pressing function
- Needs a separate kit for bearings themselves
- Hub fit must be confirmed before purchase
OTC 7394 Universal Hub Puller: what owners report
Owners who do repeated hub jobs report dedicated pullers as faster and more secure than kit adapters that almost fit. (See owner reviews for this pick.)
Several owners note OTC tools hold up across many jobs, which matters when a puller is used weekly rather than yearly.
Hub users advise confirming the puller’s fit to the specific hub before ordering, since universal still has limits.
OTC 7394 Universal Hub Puller: who should not buy
Do not buy this as your only bearing tool. Pair it with a press kit for the bearing work itself, or buy a press kit first if you only do occasional jobs.
OTC 7394 Universal Hub Puller: pair it with
Pair it with a press kit for bearing removal and installation after the hub is off.
We may earn a commission at no cost to you.
Confirm hub fitment from the listing before ordering; universal covers a range, not every hub. See our bearing puller suppliers guide.
Best heavy jaw puller: OTC 522 Large Gear and Pulley Puller
Best heavy jaw puller
Why the OTC 522 Large Gear and Pulley Puller is our pick
Not every bearing job is a press job: gears, pulleys, and exposed bearings are pulled from the outside by jaws, and a large jaw puller is the right shape for them. The OTC 522 is a large gear and pulley puller in OTC’s professional range, and it covers the bigger diameters where small pullers run out of reach. Its limit is grip: jaws need something to hold, and a bearing buried flush in a housing defeats them.
OTC 522 Large Gear and Pulley Puller key specs
- Brand: OTC
- Model: 522
- Type: large gear and pulley puller
- UPC: 731413005220
- Use: gears, pulleys, bearings gripped from outside
- Press function: no
- Separator function: no
- Jaw reach: large (model class)
- Material: Not published on retrieved listing
- Storage: Not published on retrieved listing
- Part number: 522
- Warranty: Not published on retrieved listing
OTC 522 Large Gear and Pulley Puller: fits and best for
Best for gears, pulleys, and exposed bearings on shafts where jaws can grip the outside. It fits drivetrain and accessory work, and it is not the tool for flush or blind bearings.
OTC 522 Large Gear and Pulley Puller pros and watch-outs
- Large reach covers bigger gears and pulleys
- Jaw pulling suits exposed parts a press cannot reach
- OTC professional range
- Simple, robust mechanism with few parts to lose
- Needs an outside edge to grip
- Jaws can slip if not seated squarely
- No press or separator function
- Large size is awkward in tight bays
OTC 522 Large Gear and Pulley Puller: what owners report
Owners report jaw pullers as the default for pulleys and gears, where press kits have nothing to press against. (See owner reviews for this pick.)
Several owners stress seating all jaws evenly before loading, since one loose jaw turns a pull into a slip.
Gear users describe the large size as the point: small pullers run out of reach on bigger parts.
OTC 522 Large Gear and Pulley Puller: who should not buy
Do not buy this for hub bearings or blind holes. A press kit or blind-hole set fits those jobs, and jaws cannot grip a flush bearing.
OTC 522 Large Gear and Pulley Puller: pair it with
Pair it with a bearing separator for bearings that must be lifted from behind rather than gripped from outside.
We may earn a commission at no cost to you.
Seat every jaw evenly and load slowly; an uneven jaw slips and can damage the part. See our mechanics tool set guides.
Best blind-hole set: Blind Hole Bearing Puller Set 12-Piece
Best blind-hole set
Why the Blind Hole Bearing Puller Set 12-Piece is our pick
A blind hole is the bearing job that defeats every other kit in this guide: the bearing sits in a hole with no back side to press from and no edge to grip. A blind-hole puller expands inside the bearing bore and pulls from within, which is the only approach that works without destroying the housing. This 12-piece set covers pilot bearings and similar small bores, and it is the kit to buy when the bearing’s back side is simply not accessible.
Blind Hole Bearing Puller Set 12-Piece key specs
- Brand: Not stated on retrieved listing excerpt
- Pieces: 12
- Type: blind-hole bearing puller set
- Use: pilot bearings, seals, pressed fittings
- Method: expanding collet pulling from inside the bore
- Press function: no
- Separator function: no
- Jaw function: no
- Storage: Not published on retrieved listing
- Range: small bores (pilot-bearing class)
- Part number: Not published on retrieved listing
- Warranty: Not published on retrieved listing
Blind Hole Bearing Puller Set 12-Piece: fits and best for
Best for pilot bearings in crankshafts and flywheels, and for any small bearing seated in a blind hole. It fits clutch and transmission work, and it is not a general bearing kit: its range is small bores only.
Blind Hole Bearing Puller Set 12-Piece pros and watch-outs
- Only method that works in a true blind hole
- Pulls from inside the bore without housing damage
- 12 pieces cover common small-bore sizes
- Least destructive option for pressed fittings
- Small-bore range only; not for hub bearings
- Collet must match the bore closely
- Needs care to avoid scoring the bore
- Thin coverage in this guide’s retrieved listing for maker detail
Blind Hole Bearing Puller Set 12-Piece: what owners report
Owners describe blind-hole pullers as the least destructive way to remove a pilot bearing, after other methods damaged housings. (See owner reviews for this pick.)
Several owners stress collet sizing: a loose collet slips, and a tight one will not enter the bore.
Clutch-job owners report doing the pilot bearing with the clutch, since the labour overlaps and the bearing is cheap insurance.
Blind Hole Bearing Puller Set 12-Piece: who should not buy
Do not buy this as a general bearing kit. Its range is small blind bores, and hub or axle bearings need the press or slide-hammer kits above.
Blind Hole Bearing Puller Set 12-Piece: pair it with
Pair it with a clutch alignment tool if the job is a pilot bearing during a clutch change, since alignment matters on reassembly.
We may earn a commission at no cost to you.
Size the collet to the bore before expanding it; a wrong collet either slips or scores. See our bearing puller suppliers guide.
Spec comparison
The table below gathers the headline range for every pick. Where a listing does not publish a figure, the cell says so rather than guessing.
| Attribute | Orion Motor Tech 24-Piece Wheel Bearing Press Kit | Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit | Orion Motor Tech Rear Axle Bearing Puller Kit | OTC 7394 Universal Hub Puller | OTC 522 Large Gear and Pulley Puller | Blind Hole Bearing Puller Set 12-Piece |
|---|---|---|---|---|---|---|
| Brand | Orion Motor Tech | Orion Motor Tech | Orion Motor Tech | OTC Tools | OTC | Not stated on retrieved listing excerpt |
| Pieces | 24 | 38 | Not published | Not published | Not published | 12 |
| Type | wheel bearing press kit | 2-in-1 press and separator kit | rear axle bearing puller with slide hammer | universal hub puller | large gear and pulley puller | blind-hole bearing puller set |
| Drive | front-wheel-drive applications | front-wheel-drive applications | Not published | Not published | Not published | Not published |
| Includes | sliding screws, bushings, sleeves | sliding screws, sleeves, separator, puller legs | slide hammer yoke and adapters | Not published | Not published | Not published |
| Storage | case included | case included | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing |
| Use | removal and installation | removal and installation | axle seal and bearing removal | hub removal | gears, pulleys, bearings gripped from outside | pilot bearings, seals, pressed fittings |
| Material | Not published on retrieved listing | AISI 1045 steel (listing) | Not published | Not published | Not published on retrieved listing | Not published |
| Jaw type | press, not jaw puller | Not published | Not published | Not published | Not published | Not published |
| Slide hammer | not included | Not published | Not published | no | Not published | Not published |
| Part number | Not published on retrieved listing | ATL-2414-00 | Not published | Not published | 522 | Not published on retrieved listing |
| Warranty | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing | Not published on retrieved listing |
| Separator rating | Not published | 5 ton (listing) | Not published | Not published | Not published | Not published |
| Separator jaws | Not published | 2 inch and 3 inch | Not published | Not published | Not published | Not published |
| Pullers | Not published | Not published | 3 | Not published | Not published | Not published |
| Inner diameter range | Not published | Not published | 1-1/4 to 2-7/8 inch | Not published | Not published | Not published |
| Model | Not published | Not published | Rear Axle Bearing Puller | 7394 | 522 | Not published |
| Item model number | Not published | Not published | RA0700 | Not published | Not published | Not published |
| Manufacturer part number | Not published | Not published | RA07-00 | 7394 | Not published | Not published |
| Press function | Not published | Not published | no | no | no | no |
| Country of origin | Not published | Not published | Not published | USA (listing) | Not published | Not published |
| Weight | Not published | Not published | Not published | 4.17 kg (listing) | Not published | Not published |
| Separator function | Not published | Not published | Not published | no | no | no |
| UPC | Not published | Not published | Not published | Not published | 731413005220 | Not published |
| Jaw reach | Not published | Not published | Not published | Not published | large (model class) | Not published |
| Method | Not published | Not published | Not published | Not published | Not published | expanding collet pulling from inside the bore |
| Jaw function | Not published | Not published | Not published | Not published | Not published | no |
| Range | Not published | Not published | Not published | Not published | Not published | small bores (pilot-bearing class) |
| Check Price | Check Price | Check Price | Check Price | Check Price | Check Price | Check Price |
Fitment and installation basics
Start every bearing job by identifying the bearing’s situation and measuring it: bore, outside diameter, and access on both sides. Confirm the kit’s range covers the measurement, and confirm whether the job also needs installation, since a puller-only kit leaves the new bearing to improvised pressing. Clean the shaft and housing, remove retaining clips or seals first, and set the puller square before loading. Our bearing puller suppliers guide covers kit ranges that help confirm fitment before ordering.
Press with steady, checked force and stop if alignment drifts; slide with short controlled strokes and keep the pull straight; seat separator jaws fully behind the bearing and jaws evenly around a gear. On reassembly, press only on the ring being fitted, never through the rolling elements, and use a torque wrench for hub nuts and fasteners. Replace disturbed seals as a matter of course, and see our mechanics tool set guides for the supporting tools every bearing job needs.
See also: Heavy-duty truck oil filter wrench set · Mechanics tool set under 500 · Mechanics tool set under 500 dollars · Professional mechanic tool cabinets under 100 · Impact socket sets jigsaw · Best overlanding tool kits
Safety essentials
Never press through a bearing’s rolling elements; press only on the ring being fitted.
Keep hands clear of a loaded puller; a slipping jaw or separator releases suddenly.
Wear eye protection; press fits and slide hammers can shed fragments.
Support the workpiece so it cannot fall or shift under load.
Stop and realign at the first sign of cocking; forcing a cocked press damages the bore.
Inspect shafts and housings before fitting a new bearing; a scored surface ruins it.
Three accessory picks from this guide’s own range cover the safety gaps most often missed: a method for blind holes, a straight axle pull, and a complete press-and-separator set.
Blind Hole Bearing Puller Set — pulls blind bores without housing damage. Check Price
Orion Rear Axle Bearing Puller Kit — keeps axle pulls straight with its yoke. Check Price
Orion 38-Piece 2-in-1 Kit — covers press and separator work in one box. Check Price
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Puller slips under load | Jaw or separator not seated | Reseat fully and squarely, then reload slowly |
| New bearing cocks during pressing | Press started misaligned | Stop, realign, and press only on the fitted ring |
| Bearing will not move | Wrong method for the access case | Reidentify the situation and switch methods |
| Shaft scored after pulling | Cocked or slipping pull | Inspect and dress the shaft before refitting |
| Collet slips in a blind hole | Collet size mismatched to bore | Resize the collet to the bore before expanding |
| Kit does not fit the bearing | Range not checked before ordering | Measure first and confirm the kit’s stated range |
Who should NOT buy these
**Owners with one simple hub job and no storage.** A full 38-piece kit is overkill for a single hub bearing. Buy the 24-piece press kit, or borrow a kit, and spend the difference on seals and torque tools.
**Anyone who has not identified the bearing’s situation.** If you cannot say whether the bearing is pressed, flanged, blind, or exposed, do not order yet. Identify it first, or the kit you buy may be the wrong method entirely.
**Buyers expecting a kit to install everything.** Puller-only kits remove; they do not install. If installation matters, buy a press kit that covers both directions.
**Shops without room for impact or press work.** Slide hammers are loud and press kits need bench room. If your space cannot take either, a smaller dedicated puller or professional help fits better.
Final verdict
Best general press kit: Orion Motor Tech 24-Piece Wheel Bearing Press Kit — Check Price
Most complete set: Orion Motor Tech 38-Piece 2-in-1 Kit — Check Price
Best rear-axle kit: Orion Motor Tech Rear Axle Bearing Puller Kit — Check Price
Best dedicated hub puller: OTC 7394 Universal Hub Puller — Check Price
Best heavy jaw puller: OTC 522 Large Gear and Pulley Puller — Check Price
Best blind-hole set: Blind Hole Bearing Puller Set — Check Price
FAQ
What is the best bearing puller kit for a home garage?
For most home garages, a front-wheel-drive press kit such as the Orion 24-piece set covers the commonest job: hub bearings. If you also do shaft bearings, the 38-piece 2-in-1 kit adds a separator. If your next job is a rear axle or a pilot bearing, buy the kit for that job instead, since a press kit cannot do either.
Do I need a slide hammer for bearings?
Only for bearings a press cannot reach, notably rear-axle bearings on flanged axles. A slide hammer converts impact into a straight pull where there is nowhere to press from. For hub bearings, a press kit is the controlled choice, and a slide hammer is the wrong force.
What is a bearing separator for?
A separator’s jaws close behind a bearing on a shaft and lift it where a press has nothing to push against. It is the method for shaft bearings that sit against a shoulder. It needs clearance behind the bearing, and its jaws must sit square or they slip.
Can I remove a pilot bearing without a blind-hole puller?
In a true blind hole, no method in this guide besides a blind-hole puller works without risking the housing. The puller expands inside the bore and pulls from within. Other methods either have nothing to grip or nowhere to press from, which is why blind holes get their own kit.
Should a bearing kit also install the new bearing?
Yes, where possible. Press kits that install as well as remove save a second setup and avoid improvised pressing, which often damages the new bearing by pressing through its rolling elements. Puller-only kits are fine for removal, but plan installation separately.
Why does my new bearing fail soon after fitting?
Common causes are pressing through the rolling elements, fitting onto a scored shaft or into a damaged housing, and cocking during installation. Press only on the ring being fitted, inspect both surfaces before fitting, and stop and realign at the first sign of cocking.
What size puller do I need?
Measure the bearing: bore, outside diameter, and the access on both sides. Then confirm the kit’s stated range covers it. For axle pullers, check the inner-diameter range; for separators, the jaw sizes; for blind-hole sets, the collet bore range. A kit that almost fits is a kit that slips.
Are expensive puller kits worth it?
For repeated use, yes: professional-range tools such as OTC hold up across many jobs, while a light kit may strip or bend on a stubborn bearing. For a single job, a mid-range kit or a borrowed kit is the sensible choice, and the money saved goes to seals and torque tools.
How do I protect the shaft when pulling a bearing?
Keep the pull straight, load slowly, seat jaws or separators fully before loading, and use short controlled slide-hammer strokes. Inspect the shaft after removal and dress any scoring before fitting the new bearing, since a scored surface shortens its life.
Sources
Orion 24-Piece Press Kit listing
Orion 38-Piece 2-in-1 Kit listing
Orion Rear Axle Bearing Puller Kit listing
OTC 7394 Universal Hub Puller listing
OTC 522 Large Gear and Pulley Puller listing
Blind Hole Bearing Puller Set listing
Owner reviews: Orion Motor Tech 24-Piece Wheel Bearing Press Kit
Owner reviews: Orion Motor Tech 38-Piece 2-in-1 Bearing Press Kit
Owner reviews: Orion Motor Tech Rear Axle Bearing Puller Kit
Owner reviews: OTC 7394 Universal Hub Puller
Owner reviews: OTC 522 Large Gear and Pulley Puller
Owner reviews: Blind Hole Bearing Puller Set 12-Piece
Orion Motor Tech official site
Owner discussion: r/MechanicAdvice community
Owner discussion: r/AskMechanics community
Owner discussion: r/Tools community
Owner discussion: Garage Journal forum
Bearing puller suppliers guide
Mechanics tool set under 200 guide
Mechanics tool set under 100 guide
By Leo, Founder, WinchInsider
Leo covers winches, recovery gear, and workshop tools by comparing maker specifications and owner reports, so readers can size gear from published ratings rather than slogans.
Related guides
Bearing puller suppliers · Mechanics tool set under 200 · Mechanics tool set under 100 · Impact socket set 1/2 inch · Best winch recovery kit · How to use a winch · Browse the subcategory archive · Browse the parent category archive