A Dodge wiring job goes wrong in the same place every time: halfway through, you find the kit is missing a fuse holder, the wire is too short, or the instructions assume you already know the car. A kit that is easy to install is not the cheapest kit, it is the kit that arrives complete, with wires labelled, lengths that reach, and instructions written for a first-timer.
That is what this guide looks for. A radio harness that plugs into a 1984-2006 Dodge without cutting a factory wire, and an amplifier kit that puts the power wire, ground wire, fuse, RCA cables and speaker wire in one box. The easy kit is the one you finish in a weekend, not the one you finish in a month.
This guide profiles four wiring kits for Dodge owners: the Metra radio harness for a stereo swap in a 1984-2006 Dodge, and three complete amplifier kits from DS18, TOPSTRONGGEAR and Skar Audio for adding a subwoofer or an amplifier to a Dodge.
The 30-second answer
Buy the Metra 70-1817 Radio Wiring Harness for Chrysler/Jeep 1984-2006 Check Price for a plug-and-play radio harness in a 1984-2006 Dodge. Buy the DS18 AK4 Complete 4 Gauge CCA Amplifier Installation Wiring Kit Check Price for a complete 4-gauge amp kit for one amplifier. Buy the TOPSTRONGGEAR True 4 AWG Amplifier Wiring Kit Check Price for a true 4 AWG amp kit with a 17-foot power cable and a 3-foot ground cable. Buy the Skar Audio SKAR4ANL-CCA 4 Gauge Amplifier Wiring Kit Check Price for a complete 4-gauge kit with a 2-year limited warranty.
How we researched this guide
We profiled four wiring kits, checked Amazon listing data for each one through the Creators API, and reviewed maker pages, manuals and owner reports in retailer reviews about circuit count, wire length, fuse size and how long the install actually takes. Where a harness fits only certain years, we recorded the year range rather than guessing.
Our quick picks
Best Dodge Radio Harness
Metra 70-1817 Radio Wiring Harness for Chrysler/Jeep 1984-2006
Best for a plug-and-play radio harness in a 1984-2006 Dodge: it plugs into the factory radio connector, so a new stereo fits with no cutting.
Best Complete Amp Kit
DS18 AK4 Complete 4 Gauge CCA Amplifier Installation Wiring Kit
Best for a complete 4-gauge amp kit for one amplifier, with super flex wire, an 80-amp ANL fuse and power for systems up to 1,200 watts.
Best True 4 AWG Kit
TOPSTRONGGEAR True 4 AWG Amplifier Wiring Kit
Best for a true 4 AWG amp kit with a 17-foot power cable and a 3-foot ground cable, RCA cables, fuse holder, speaker wire and turn-on wire.
Best Warranty Amp Kit
Skar Audio SKAR4ANL-CCA 4 Gauge Amplifier Wiring Kit
Best for a complete 4-gauge kit with a 2-year limited warranty, a 17-foot power cable and a 100-amp ANL fuse.
Quick comparison
| Product | Kit type | Use | Warranty | Check Price |
|---|---|---|---|---|
| Metra 70-1817 Radio Wiring Harness for Chrysler/Jeep 1984-2006 | Radio harness, 1984-2006 | Stereo swap in a Dodge | Not published | Check Price |
| DS18 AK4 Complete 4 Gauge CCA Amplifier Installation Wiring Kit | 4-gauge CCA, 1,200W | One amplifier | Not published | Check Price |
| TOPSTRONGGEAR True 4 AWG Amplifier Wiring Kit | True 4 AWG, 17 ft cable | One amplifier | Not published | Check Price |
| Skar Audio SKAR4ANL-CCA 4 Gauge Amplifier Wiring Kit | 4-gauge CCA, 1,200W | One amplifier | 2-year limited | Check Price |
How to choose an automotive wiring kit for a Dodge
Radio harness or amp kit
Start with the job, because it decides the kit. A radio harness suits a stereo swap in a 1984-2006 Dodge, while an amp kit suits adding a subwoofer or an amplifier. A full chassis rewire needs a harness made for the car, which is a bigger job than either kit in this guide. Best Car Buffer for Home Use
Check the year range
Fitment decides whether a harness fits at all. The Metra harness in this guide fits 1984-2006 Chrysler, Dodge, Jeep and Plymouth vehicles, and a Dodge outside that range needs a different adapter. Check the year, the model and the factory connector on the listing before ordering. 12V Adapters Reviews for Cars
Wire gauge and length
Wire gauge decides whether an amplifier gets the current it needs. True 4-gauge wire feeds a single amplifier up to 1,200 watts, while undersized wire starves the amp and runs hot. Length matters too: a 17-foot cable reaches most trunks, but a long SUV needs 20 feet. Measure the run before you order, and buy true gauge, not a thin wire in a thick jacket. 12V Adapters Reviews Best
Fuse size and placement
Fuse size decides whether the install is safe. A 100-amp ANL fuse protects a 4-gauge run, and the fuse must sit within 18 inches of the battery, because the wire between the battery and the fuse is unprotected. Check that the kit includes the fuse and the holder, and never install an amp kit without a fuse at the battery. 12V Adapters for Beginners Guide
CCA or OFC wire
Wire material decides cost and performance. CCA, copper-clad aluminium, costs less and works well at 4 gauge for systems up to 1,200 watts, while OFC, oxygen-free copper, carries more current for the same gauge and suits high-end systems. Buy CCA for a single amp on a budget, and OFC for a competition system or a long run where voltage drop matters. 12V Adapters Review Amazon
What the kit includes
Kit contents decide whether you finish in a weekend. A complete kit includes the power wire, ground wire, fuse and holder, RCA cables, speaker wire and turn-on wire, while a bare kit leaves you shopping for parts mid-install. Check the contents list before you order, and count the RCA channels, because a four-channel amp needs two pairs of RCAs, not one. 12V Adapters Alternative for LED Lights
Automotive wiring kits for Dodge by budget
| Tier | What you get | Example pick |
|---|---|---|
| Entry | A plug-and-play radio harness for a stereo swap, with no cutting. | Metra 70-1817 Radio Wiring Harness |
| Mid | A complete 4-gauge CCA amp kit for one amplifier, with fuse, RCA and speaker wire in the box. | DS18 AK4 Complete 4 Gauge Kit |
| Top | A true 4 AWG kit with a 17-foot power cable and a 3-foot ground cable, or a Skar kit with a 2-year limited warranty. | TOPSTRONGGEAR True 4 AWG Kit |
Types of automotive wiring kits for Dodge compared
| Type | How it works | Best for | Watch out for |
|---|---|---|---|
| Radio harness adapter | Plugs into the factory radio connector, with color-coded leads. | Stereo swaps in a 1984-2006 Dodge | Only fits the listed years |
| Complete amp kit | Power, ground, fuse, RCA and speaker wire in one box. | Single amplifier installs | One amplifier only |
| True-gauge amp kit | Wire that measures what it claims, with a 17-foot power cable. | A single amplifier where true gauge matters | CCA, not oxygen-free copper |
| Chassis harness | A full harness for a complete rewire, with labelled wires. | Classic Dodge rewires | Takes a weekend, needs care |
Detailed reviews
Each kit below covers a different part of the choice: a plug-and-play radio harness for a 1984-2006 Dodge, and three complete amp kits. Read the fitment and the power rating before you buy, because a harness made for one car will not fit another.
Best Dodge Radio Harness: Metra 70-1817 Radio Wiring Harness for Chrysler/Jeep 1984-2006
Best Dodge Radio Harness
Why the Metra 70-1817 is our pick
The Metra 70-1817 is the Dodge pick because it solves the stereo swap the easy way: it plugs into the factory radio harness, so the new stereo connects without cutting a single factory wire. The listing describes a radio wiring harness for Chrysler and Jeep 1984-2006 that connects an aftermarket stereo adapter to the factory plug, with color-coded leads, no cutting or splicing, and a plug-and-play upgrade. The honest limit is the year range: it fits 1984-2006 Chrysler, Dodge, Jeep and Plymouth vehicles, so check the year and the factory connector before ordering, because a different year needs a different harness.
Metra 70-1817 key specs
- Fit: Chrysler, Dodge, Jeep, Plymouth 1984-2006
- Connectors: Two 8-pin factory plugs
- Wiring: Power and 4 speakers
- Leads: Color-coded
- Install: Plug and play, no cutting
- Splicing: None needed
- Use: Aftermarket stereo install
- Maker: Metra
- Model: 70-1817
- Listing: Verified
- Warranty: Not published
- Type: Radio wiring harness
Metra 70-1817: fits and best for
This harness fits a Dodge, Chrysler, Jeep or Plymouth from 1984 to 2006 with the factory radio connector, and a driver swapping in an aftermarket stereo without cutting factory wires.
Metra 70-1817 pros and watch-outs
- Plugs into the factory connector
- No cutting or splicing
- Color-coded leads
- Covers power and four speakers
- Keeps factory wiring intact
- Only fits 1984-2006 vehicles
- Radio only, not a full chassis harness
- Check the factory connector first
Metra 70-1817: what owners report
Installer guides for a Dodge stereo swap agree on the method: use a harness adapter rather than cutting the factory wires, because the adapter preserves the original wiring for the next stereo. How to Connect a Car Radio
Owner coverage for this harness is thin in forums, so the listing itself is the source for the fitment and plug-and-play claims above: it plugs into the factory harness at the radio, with power and four speakers through two 8-pin connectors. (source: Amazon listing).
Metra 70-1817: who should not buy
Do not buy this for a Dodge outside 1984-2006, or for a full chassis rewire. It is a radio harness only, and a car outside the year range needs a different adapter. Check the year and the factory connector on the listing before ordering.
Metra 70-1817: pair it with
Pair it with butt connectors or solder and heat shrink for the radio-side wires, and keep the factory harness until the new stereo works. Test every speaker before you push the stereo back into the dash.
We may earn a commission at no cost to you.
Match the colors wire by wire and test the stereo before refitting the dash, because a swapped speaker wire is easy to fix on the bench and hard to fix behind the dash. 12V Adapters Alternative to USB
Best Complete Amp Kit: DS18 AK4 Complete 4 Gauge CCA Amplifier Installation Wiring Kit
Best Complete Amp Kit
Why the DS18 AK4 is our pick
The DS18 AK4 is the complete amp kit pick because everything for one amplifier is in the box. The 4-gauge CCA power wire runs 17 feet from the battery to the amp, the kit includes an 80-amp ANL fuse and holder, and the super flex wire bends around trim and seats without fighting you. It is rated for systems up to 1,200 watts, which covers most single-amplifier installs, and the kit includes the RCA cables and speaker wire so there is no second trip to the shop.
DS18 AK4 key specs
- Gauge: 4 gauge CCA
- Power wire: 17 feet
- Fuse: 80-amp ANL with holder
- Power: Up to 1,200 watts
- Amplifiers: 1
- Wire: Super flex
- Includes: RCA cables and speaker wire
- Listing: Verified
- Model: AK4
DS18 AK4: fits and best for
This kit fits a driver adding one amplifier to a car, truck or SUV and wanting the whole install in one box. It suits a single subwoofer amp or a four-channel amp up to 1,200 watts, and it is the pick for a first amp install.
DS18 AK4 pros and watch-outs
- Complete kit for one amplifier
- 17-foot power wire reaches the trunk
- 80-amp ANL fuse included
- Super flex wire routes easily
- Rated up to 1,200 watts
- CCA wire, not oxygen-free copper
- One amplifier only
- Warranty not published on the listing
DS18 AK4: what owners report
Owner reports in retailer reviews commonly note that the kit has everything needed for a single-amp install, and that the super flex wire makes routing under trim straightforward.
Owners also report that the 17-foot power wire reaches the trunk in most cars, though a long SUV may need the wire run carefully to avoid a shortfall. (source: Amazon listing).
DS18 AK4: who should not buy
Do not buy this kit for two amplifiers or a system over 1,200 watts. A single 4-gauge CCA kit cannot feed a bigger system safely, and a dual-amp build needs a larger gauge kit or a distribution block with heavier wire.
DS18 AK4: pair it with
Pair it with a fused distribution block if you add a second amp later, and keep zip ties and split loom on hand for a tidy install. Fuse within 18 inches of the battery, and ground to bare metal.
We may earn a commission at no cost to you.
Run the power wire down one side of the car and the RCA cables down the other, because power and signal wires run together pick up noise. Fuse the power wire within 18 inches of the battery, and ground the amp to clean bare metal. Best ATV Winch
Best True 4 AWG Kit: TOPSTRONGGEAR True 4 AWG Amplifier Wiring Kit
Best True 4 AWG Kit
Why the TOPSTRONGGEAR 4 AWG is our pick
The TOPSTRONGGEAR kit is the true-gauge pick because the wire measures what it claims. The kit uses true 4 AWG CCA wire, with a 17-foot power cable and a 3-foot ground cable that reach the trunk in most cars, plus RCA cables, a fuse holder, speaker wire and a turn-on wire in the box. True gauge matters because undersized wire starves an amplifier and runs hot, and this kit gives a single amplifier the full current it needs without a voltage drop at the amp.
TOPSTRONGGEAR 4 AWG key specs
- Gauge: True 4 AWG CCA
- Power cable: 17 feet
- Ground cable: 3 feet
- Includes: RCA cables
- Includes: Fuse holder
- Includes: Speaker wire and turn-on wire
- Listing: Verified
- Model: True 4 AWG kit
TOPSTRONGGEAR 4 AWG: fits and best for
This kit fits a driver who wants true-gauge wire for a single amplifier in a car where a 17-foot power cable reaches the trunk. It suits a subwoofer amp or a four-channel amp, and it is the pick for an installer who has been burned by undersized wire before.
TOPSTRONGGEAR 4 AWG pros and watch-outs
- True 4 AWG wire, not undersized
- 17-foot power cable reaches most trunks
- RCA, fuse holder and speaker wire included
- Full kit in one box
- 3-foot ground cable included
- CCA wire, not oxygen-free copper
- One amplifier only
- 17-foot power cable is short for a very long SUV
- Warranty not published on the listing
TOPSTRONGGEAR 4 AWG: what owners report
Owner reports in retailer reviews commonly note that the 17-foot power cable reaches the trunk in most cars, and that the wire feels thicker than other 4-gauge kits.
Owners also report that the kit includes everything for a single-amp install, though the fuse holder placement needs care to keep it within reach of the battery. (source: Amazon listing).
TOPSTRONGGEAR 4 AWG: who should not buy
Do not buy this kit if you need oxygen-free copper wire for a high-end system. This kit uses CCA wire, which works well at 4 gauge but is not the same as OFC, and a competition system should use OFC instead.
TOPSTRONGGEAR 4 AWG: pair it with
Pair it with a fused distribution block for a future second amp, and keep a wire stripper and crimping tool on the bench. Route the power wire away from the RCA cables to keep noise out of the signal.
We may earn a commission at no cost to you.
Measure the run from the battery to the amplifier before you order, because a 17-foot cable sounds long until it has to go around a seat and under the carpet. Fuse within 18 inches of the battery, and ground to bare metal. Best Jump Starter
Best Warranty Amp Kit: Skar Audio SKAR4ANL-CCA 4 Gauge Amplifier Wiring Kit
Best Warranty Amp Kit
Why the Skar SKAR4ANL-CCA is our pick
The Skar Audio SKAR4ANL-CCA is the warranty pick because it pairs a complete kit with a 2-year limited warranty, which is rare for an amp kit at this level. The kit includes a 17-foot 4-gauge CCA matte blue power cable, a 100-amp ANL fuse and holder, 20 feet of 16-gauge speaker wire and a 2-channel RCA interconnect cable, and it is rated for systems up to 1,200 watts. It is the kit for a driver who wants a known brand, a complete box and a warranty behind it.
Skar SKAR4ANL-CCA key specs
- Gauge: 4 gauge CCA
- Power cable: 17 feet, matte blue
- Fuse: 100-amp ANL with holder
- Speaker wire: 20 feet, 16 gauge
- RCA: 2-channel interconnect
- Power: Up to 1,200 watts
- Warranty: 2-year limited
- Listing: Verified
- Model: SKAR4ANL-CCA
Skar SKAR4ANL-CCA: fits and best for
This kit fits a driver adding one amplifier up to 1,200 watts and wanting a complete kit from a known car-audio brand. It suits a single subwoofer amp or a four-channel amp, and it is the pick for anyone who values a 2-year limited warranty on the kit.
Skar SKAR4ANL-CCA pros and watch-outs
- 2-year limited warranty
- Complete kit with RCA and speaker wire
- 100-amp ANL fuse included
- Matte blue cable looks tidy in the trunk
- Rated up to 1,200 watts
- CCA wire, not oxygen-free copper
- 17-foot cable is short for very long vehicles
- One amplifier only
Skar SKAR4ANL-CCA: what owners report
Owner reports in retailer reviews commonly note that the kit has everything for a single-amp install, and that the matte blue cable and the included RCA cables make for a tidy trunk.
Owners also report that the 100-amp fuse and holder are solid, though the 17-foot power cable needs careful routing in a long SUV. (source: Amazon listing).
Skar SKAR4ANL-CCA: who should not buy
Do not buy this kit for a system over 1,200 watts or for two amplifiers. A single 4-gauge CCA kit cannot feed a bigger system, and a dual-amp build needs heavier wire and a distribution block.
Skar SKAR4ANL-CCA: pair it with
Pair it with a fused distribution block if you add a second amp later, and keep zip ties and split loom for a tidy install. Fuse within 18 inches of the battery, and ground the amp to bare metal.
We may earn a commission at no cost to you.
Check the amplifier power rating before you order, because this kit is rated for systems up to 1,200 watts. Measure the run from the battery to the amp, and run the RCA cables down the opposite side of the car from the power wire. Best Engine Oil
Spec comparison
| Spec | Metra 70-1817 | DS18 AK4 | TOPSTRONGGEAR 4 AWG | Skar SKAR4ANL-CCA |
|---|---|---|---|---|
| Kit type | Radio harness adapter | Complete amp kit | True-gauge amp kit | Complete amp kit |
| Fit | 1984-2006 Dodge | One amplifier | One amplifier | One amplifier |
| Gauge | Factory | 4 gauge CCA | True 4 AWG CCA | 4 gauge CCA |
| Power wire | Factory harness | 17 feet | 17 feet | 17 feet |
| Fuse | Not applicable | 80-amp ANL | Fuse holder included | 100-amp ANL |
| RCA cables | No | Included | Included | 2-channel included |
| Speaker wire | No | Included | Included | 20 feet, 16 gauge |
| Power rating | Not applicable | Up to 1,200 watts | Not published | Up to 1,200 watts |
| Warranty | Not published | Not published | Not published | 2-year limited |
| Use | Stereo swap | One amplifier | One amplifier | One amplifier |
| Check Price | Check Price | Check Price | Check Price | Check Price |
Installing your wiring kit in a Dodge
Disconnect the battery before you touch any wire, and photograph the old radio and the fuse box before you remove anything. Plug the Metra harness into the factory radio connector, then match the color-coded leads to the new stereo wire by wire, using butt connectors or solder and heat shrink. Test the stereo and every speaker before you push it back into the dash. Our Best Automotive Multimeters vs Watts guide shows how to check each wire with a meter before you turn the key.
For an amplifier kit, run the power wire down one side of the Dodge and the RCA cables down the other, because power and signal wires run together pick up noise. Fuse the power wire within 18 inches of the battery, ground the amp to clean bare metal, and keep wires away from hot exhaust parts and sharp edges. See our ABS Scan Tools vs OBDII guide for the diagnostic basics when a circuit misbehaves after the install.
Safety essentials
- Disconnect the battery before you touch any wire, because a live 12-volt circuit can spark and burn.
- Fuse the amplifier power wire within 18 inches of the battery, because the wire before the fuse is unprotected.
- Ground the amplifier to clean bare metal, because a poor ground causes noise, heat and a fire risk.
- Never run power and RCA cables together, because the power wire induces noise into the signal.
- Keep wires away from hot exhaust parts and sharp edges, and use grommets where a wire passes through metal.
- Check every circuit with a multimeter before you turn the key, because a crossed wire can burn a harness in seconds.
Wiring work puts live 12-volt circuits in your hands, so a few habits keep the Dodge, the stereo and the driver safe. These six rules cover the mistakes that cost the most.
Painless Performance 50102 Fuel Pump Relay Kit, a 30-amp relay kit for the fuel pump circuit on a rewired car or truck. See our Best Automotive Multimeters vs Watts guide for testing a relay circuit.
CT Sounds AMPKIT-4GA-PRO, a 4-gauge CCA complete amp wiring install kit, for a second amplifier install. See our ABS Scan Tools vs OBDII guide for diagnostic basics.
Skar Audio SKAR4ANL-CCA 4 Gauge Amplifier Wiring Kit, a complete kit with an inline ANL fuse holder. See our Best Automotive Multimeters vs Watts guide for checking the install.
Troubleshooting
Most wiring problems trace to one of the causes below, and the fix is usually a ground, a fuse or a routing change rather than a new kit. Best All-Season Tires Under 100
| Symptom | Likely cause | Fix |
|---|---|---|
| Amplifier will not turn on | Remote turn-on wire not connected | Check the turn-on wire at the head unit and the amp |
| Buzzing or whining in the speakers | Power and RCA wires run together | Reroute the RCA cables down the opposite side of the car |
| Fuse blows at the battery | Short in the power wire or a pinched cable | Inspect the full power run for chafing and sharp edges |
| Lights dim when the bass hits | Ground is poor or the wire is too thin | Ground to clean bare metal and check the gauge |
| A circuit is dead after a rewire | Connector not seated or a wire swapped | Check the connector and the circuit with a multimeter |
| Radio harness does not fit the Dodge | Wrong year range for the radio harness | Check the 1984-2006 fitment before ordering |
Who should NOT buy these
Do not buy a harness without checking the fitment. A radio harness is made for certain years, and the Metra 70-1817 fits 1984-2006 Chrysler, Dodge, Jeep and Plymouth vehicles only. Check the year, the model and the factory connector on the listing, and keep the old radio until the new one is fully working. Best All-Season Tires Under 200
Do not buy an amp kit without checking the power rating. A 4-gauge CCA kit rated for 1,200 watts cannot feed a 2,000-watt system, and an undersized kit runs hot and starves the amplifier. Match the kit to the amplifier, and buy heavier wire for a bigger system. Best Garage Security Cameras Under 100
Do not skip the fuse. An amplifier power wire without a fuse at the battery is a fire risk, because a short anywhere along the run draws full battery current. Fuse within 18 inches of the battery, and use the fuse size the kit specifies. Best Garage Storage
Do not run power and signal wires together. A power wire run beside an RCA cable induces a whine into the speakers that no filter will fully remove. Run power down one side of the car and signal down the other, and cross them at right angles if they must meet. Best Hard Tonneau Cover Under 500
Final verdict
Best Dodge Radio Harness: Metra 70-1817 Check Price — the plug-and-play radio harness for a 1984-2006 Dodge
Best Complete Amp Kit: DS18 AK4 Check Price — the complete 4-gauge kit for one amplifier
Best True 4 AWG Kit: TOPSTRONGGEAR 4 AWG Check Price — the true 4 AWG kit for a single amplifier
Best Warranty Amp Kit: Skar SKAR4ANL-CCA Check Price — the complete 4-gauge kit with a 2-year limited warranty
FAQ
What makes a wiring kit easy to install?
A kit that arrives complete, with labelled wires, lengths that reach, and a fuse, holder, RCA cables and speaker wire in the box. A direct-fit harness with factory-style connectors is easier than a universal kit, because it plugs in rather than needing cutting and splicing. The easy kit is the one you finish in a weekend.
What is the difference between a direct-fit and a universal harness?
A direct-fit harness is made for one car, with connectors and wire lengths that match the factory layout, while a universal harness needs cutting, splicing and a wiring diagram to fit any car. Direct fit costs more and installs faster, while universal costs less and takes longer. Buy direct fit when one exists for your car.
How many circuits do I need in a harness?
A full rewire needs 26 or 27 circuits to cover lights, ignition, charging, accessories and the fuel system. A smaller harness leaves circuits for later, and adding a circuit after the install is harder than having a spare. Count the circuits your car needs, and buy a harness with a few spares.
What gauge wire do I need for an amplifier?
True 4-gauge wire feeds a single amplifier up to 1,200 watts, while 8-gauge suits a small amp and 1/0 gauge suits a big system or two amplifiers. Buy true gauge, not a thin wire in a thick jacket, and check the kit rating against the amplifier rating before you order.
What is the difference between CCA and OFC wire?
CCA is copper-clad aluminium, which costs less and works well at 4 gauge for systems up to 1,200 watts, while OFC is oxygen-free copper, which carries more current for the same gauge. Buy CCA for a single amp on a budget, and OFC for a high-end system or a long run where voltage drop matters.
Where should I put the fuse in an amp kit?
Within 18 inches of the battery, on the power wire, because the wire between the battery and the fuse is unprotected. A 100-amp ANL fuse protects a 4-gauge run, and the fuse size should match the kit rating. Never install an amp kit without a fuse at the battery.
Will the Metra 70-1817 fit my Dodge?
Yes, if the Dodge is a 1984-2006 model with the factory radio connector the harness is made for. The listing covers Chrysler, Dodge, Jeep and Plymouth vehicles from 1984 to 2006, with power and four speakers through two 8-pin connectors. Check the year and the factory connector before ordering, because a Dodge outside that range needs a different adapter.
How long does a rewire take?
A full chassis rewire takes a weekend for a careful first-timer, including labelling, routing and checking each circuit. An amplifier install takes a few hours. Plan for two days on a rewire, keep the old harness until the new one works, and check every circuit with a multimeter before you turn the key.
Why does my amplifier whine through the speakers?
The power wire and the RCA cables are probably run together, which induces noise into the signal. Reroute the RCA cables down the opposite side of the car from the power wire, ground the amplifier to clean bare metal, and check that the head unit ground is solid.
Sources
- Amazon listing, Metra 70-1817 radio harness, ASIN B0002BF0DE
- Amazon listing, DS18 AK4 amp kit, ASIN B07HDL388R
- Amazon listing, TOPSTRONGGEAR 4 AWG kit, ASIN B07WTTV19N
- Amazon listing, Skar SKAR4ANL-CCA kit, ASIN B075K5NPMC
- Best amp wiring kits guide, Car Care Total
- Best 4-gauge amp wire kits, Top5Best
- Best car amplifier power wire, TopTenReviewed
- Skar SKAR4ANL-CCA price history, PriceHistory.app
- Best amp kits, Top5Best
- Wiring the Royal Scamp with a Painless Mopar harness, Street Tech Magazine
- How to Connect a Car Radio, Car Interior
By Leo, Founder, WinchInsider
Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.
Related guides
- Best Performance Monitors Under 100
- Best Storage Bins
- Best Tool Storage
- Best Tow Ropes Under 100
- Battery Tender Junior vs NOCO Genius1
- Warning Lights Reviews
Metra 70-1817 Radio Wiring Harness for Chrysler/Jeep 1984-2006