Best Auto Weatherstrip Adhesive: 5 Tubes That Actually Hold

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

The door seal peels away at the corner, wind whistles through the gap, and rain finds its way onto the carpet. The seal itself is fine, but the glue gave up years ago.

A weatherstrip adhesive glues a rubber seal into its channel and holds it there through every slam, every summer and every car wash. The bond must stay flexible, because a door seal moves, and it must resist water, oil and heat, because that is where it lives.

This guide compares five tubes, from the black 3M adhesive most shops use to a silicone for gaps and the classic yellow formula, so you can pick the one that matches your seal, your car and your weather.

The 30-second answer

Buy the 3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz Check Price for the best overall weatherstrip adhesive. Buy the Permatex 81850 Black Super Weatherstrip Adhesive, 5 oz Check Price for the same job at a lower outlay. Buy the 3M Super Weatherstrip and Gasket Adhesive, 08581, Black, 2 fl oz Tube Check Price for a single seal repair. Buy the Permatex 81158 Black Silicone Adhesive Sealant, 3 oz Tube Check Price for sealing gaps with silicone. Buy the 3M Yellow Super Weatherstrip and Gasket Adhesive, 08001, 5 fl oz (written alternative — see below) for the classic yellow formula.

How we researched this guide

We profiled five weatherstrip adhesives, checked Amazon listing data for four of them live through the Creators API, and reviewed maker data sheets and independent roundups about bond strength, flexibility, temperature range and rubber compatibility. The fifth pick, the 3M 08001 Yellow, is a written alternative: we could not verify its Amazon listing, so it carries a disclosure and a substitute button instead of a verified link.

Our quick picks

Best Overall

3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz

Best for most weatherstrip jobs: a black 5 fl oz tube that forms a flexible waterproof bond and resists vibration, oils and solvents.

Best Value

Permatex 81850 Black Super Weatherstrip Adhesive, 5 oz

Best for value: a black 5 oz weatherstrip adhesive that bonds rubber seals and gaskets for less than the 3M tube.

Best Small Tube

3M Super Weatherstrip and Gasket Adhesive, 08581, Black, 2 fl oz Tube

Best for a single seal: a black 2 fl oz tube of the same 3M adhesive, sized for one repair instead of a full car.

Best Silicone Option

Permatex 81158 Black Silicone Adhesive Sealant, 3 oz Tube

Best for sealing gaps: a black RTV silicone sealant rated from minus 75 to 450 degrees Fahrenheit, for weatherstripping, glass and vinyl tops.

Best Classic Yellow

3M Yellow Super Weatherstrip and Gasket Adhesive, 08001, 5 fl oz

Best for the classic yellow formula: the original 5 fl oz weatherstrip adhesive for seals and gaskets.

We could not verify a live Amazon listing for the 3M 08001 Yellow at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the 3M 08008 black adhesive.

Closest verified Amazon option in this guide:

Quick comparison

Product Size and colour Use Warranty Check Price
3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz Black, 5 fl oz Door seals and gaskets Not published Check Price
Permatex 81850 Black Super Weatherstrip Adhesive, 5 oz Black, 5 oz Door seals on a budget Not published Check Price
3M Super Weatherstrip and Gasket Adhesive, 08581, Black, 2 fl oz Tube Black, 2 fl oz One seal repair Not published Check Price
Permatex 81158 Black Silicone Adhesive Sealant, 3 oz Tube Black silicone, 3 oz Sealing gaps and splits Not published Check Price
3M Yellow Super Weatherstrip and Gasket Adhesive, 08001, 5 fl oz Yellow, 5 fl oz Classic yellow formula Not published We could not verify a live Amazon listing for the 3M 08001 Yellow at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the 3M 08008 black adhesive. Check Price

How to choose a weatherstrip adhesive

Rubber type first

Rubber type comes before brand, because the wrong adhesive will not hold the rubber you have. Most door seals are EPDM, sponge rubber or solid rubber, and the 3M data sheet directs EPDM work to the 08011 adhesive rather than the 08001 or 08008. Check what your seal is made of before you buy, because a tube that bonds one rubber can fail on another. Best All-Season Tires Under 100

Colour that hides

Colour matters more than it sounds, because the glue shows at the edges of a seal. Black disappears against a dark seal and a dark channel, while yellow disappears on light coloured seals and pale interiors. Pick the colour that matches your seal, not the one you happen to have on the shelf. Best All-Season Tires Under 200

Flexibility of the bond

A door seal moves every time the door closes, so the bond must flex with it. A rigid glue cracks within months, while a flexible adhesive absorbs the movement and holds for years. Look for a flexible bond in the maker description, and treat any adhesive that dries hard as the wrong tool for a door seal. Best Garage Security Cameras Under 100

Tube size

Tube size is about how much seal you are doing. A 2 fl oz tube covers one door seal, a 5 fl oz tube covers a full set of door, trunk and hood seals, and a 3 oz silicone tube covers gaps and repairs. An opened tube does not keep forever, so buy the size that matches the job, not the biggest tube on the shelf. Best Garage Storage

Cure and clamping

Weatherstrip adhesive needs a tack stage and a cure stage. You apply a thin coat to both surfaces, let it turn tacky, press the seal in and hold it with tape or a clamp while it cures. Rushing the tack stage gives a weak bond, and driving before the cure lets the seal creep out of its channel. Best Hard Tonneau Cover Under 500

Silicone versus adhesive

Silicone and weatherstrip adhesive are different tools. An adhesive glues a new seal into its channel, while a silicone sealant fills gaps, beds a seal and repairs a split, staying flexible across a wide temperature range. Buy the adhesive for a new seal and the silicone for a gap or a leak. Best Mud Flaps

Weatherstrip adhesives by budget

Tier What you get Example pick
One seal repair A 2 fl oz tube of the 3M adhesive, for a single peeling seal. 3M 08581 Black
Full car of seals A 5 fl oz tube in black, for a full set of door and trunk seals. 3M 08008 Black
Gaps and leaks A 3 oz silicone tube, for sealing gaps and splits rather than gluing. Permatex 81158

Types of weatherstrip adhesive compared

Type How it works Best for Watch out for
Black weatherstrip adhesive A flexible glue that bonds rubber seals to metal and hides on dark seals. Most door, trunk and hood seals Shows on light coloured seals
Yellow weatherstrip adhesive The classic flexible glue, in yellow, for light seals and gasket work. Classic cars and light seals Shows on dark seals
Black silicone sealant An RTV silicone that fills and seals gaps and stays flexible in heat and cold. Gaps, splits and windshield frames Not a glue for new seals
Spray adhesive A sprayed contact adhesive for large flat trim and headliners. Large flat surfaces Messy on a narrow seal channel

Detailed reviews

Four picks below are verified Amazon listings, checked live through the Creators API. The fifth, the 3M 08001 Yellow, is a written alternative with a disclosure and a substitute button. Read the rubber type before you buy, because that decides which tube holds.

Best Overall: 3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz

Best Overall

Why the 3M 08008 Black is our pick

The 3M 08008 is the overall pick because it is the adhesive most restoration shops reach for first. The listing describes a black super weatherstrip and gasket adhesive in a 5 fl oz tube that forms a flexible waterproof bond, and the maker notes it resists vibration, oils, solvents and detergents. That flexibility matters: a door seal moves every time the door closes, and a rigid glue cracks while a flexible one holds. It bonds rubber weatherstripping to metal and also holds paper, cork and rubber gaskets in place during assembly. The black colour disappears against most seals, so a careful job looks factory fresh.

3M 08008 Black key specs

  • Type: Super weatherstrip and gasket adhesive
  • Colour: Black
  • Size: 5 fl oz tube
  • Bond: Flexible, waterproof
  • Resists: Vibration, oils, solvents, detergents
  • Use: Rubber weatherstripping and gaskets
  • Maker: 3M
  • Part number: 08008
  • UPC: 051135080085 per listing
  • Application: Brush or spread from tube
  • Listing: Verified
  • Warranty: Not published

3M 08008 Black: fits and best for

This adhesive fits a restorer or a DIY owner refitting door, trunk or hood seals on a classic or a daily driver. It suits any job where the seal must flex with the door and survive rain, heat and engine bay fumes.

3M 08008 Black pros and watch-outs

  • Flexible bond survives door movement
  • Waterproof once cured
  • Resists oils and solvents
  • Black colour hides the joint
  • Also holds gaskets in place
  • Needs clean surfaces to bond
  • Strong fumes, ventilate well
  • Not the right pick for EPDM rubber
  • Warranty not published in the listing

3M 08008 Black: what owners report

Owner reports in retailer reviews commonly note the 08008 holds door seals through years of slamming and rain, and the black colour blends into the seal.

Owners also report it needs both surfaces clean and dry, though some note the fumes are strong indoors. SellySell reviews the 08008 as a strong flexible bond for weatherstripping.

3M 08008 Black: who should not buy

Do not buy this for EPDM rubber seals, because the 3M data sheet directs EPDM work to the 08011 adhesive instead. Check your seal material first, and use the right adhesive for the rubber you have.

3M 08008 Black: pair it with

Pair it with a trim removal tool, so the old seal comes off cleanly without bending the channel it sits in.

We may earn a commission at no cost to you.

Apply a thin even coat to both surfaces and let it turn tacky before you press them together. Best Performance Monitors Under 100

Best Value: Permatex 81850 Black Super Weatherstrip Adhesive, 5 oz

Best Value

Why the Permatex 81850 is our pick

The Permatex 81850 is the value pick because it does the same job as the 3M 08008 for less outlay. The listing describes a black super weatherstrip adhesive in a 5 oz tube, made to bond rubber weatherstripping to metal and to hold gaskets during assembly. Permatex is a long standing name in automotive sealants, and this adhesive is its direct answer to the 3M tube. The black colour hides the bond line on dark seals, and the tube is the same practical size, so one tube covers a full set of door seals with some left over. For a budget restoration or a fleet job, the saving across several tubes adds up.

Permatex 81850 key specs

  • Type: Super weatherstrip adhesive
  • Colour: Black
  • Size: 5 oz tube
  • Use: Rubber weatherstripping and gaskets
  • Maker: Permatex
  • Part number: 81850
  • UPC: 686226818508 per listing
  • Bond: Flexible per maker
  • Application: Spread from tube
  • Listing: Verified
  • Warranty: Not published
  • Weight: Per listing

Permatex 81850: fits and best for

This adhesive fits an owner doing a full set of seals on a budget, or a fleet shop that goes through tubes regularly. It suits the same door, trunk and hood seal work as the 3M tube, at a lower outlay per tube.

Permatex 81850 pros and watch-outs

  • Same job as the top pick for less
  • Black colour hides the bond
  • 5 oz covers a full set of seals
  • Trusted sealant brand
  • Also holds gaskets in place
  • Needs clean surfaces to bond
  • Strong fumes, ventilate well
  • Not the right pick for EPDM rubber
  • Warranty not published in the listing

Permatex 81850: what owners report

Owner reports in retailer reviews commonly note the 81850 holds door seals well and the tube lasts through a full car, which makes it a good value for a restoration.

Owners also report it works best on clean dry metal, though some note it skins over fast, so work one section at a time.

Permatex 81850: who should not buy

Do not buy this if you want the 3M name on the tube, because this is the Permatex equivalent. The bond and the size match, but the brand does not.

Permatex 81850: pair it with

Pair it with masking tape, so the seal is held in place while the adhesive cures.

We may earn a commission at no cost to you.

Work one seal section at a time: the adhesive skins over fast and a rushed full length coat will not tack evenly. Best Storage Bins

Best Small Tube: 3M Super Weatherstrip and Gasket Adhesive, 08581, Black, 2 fl oz Tube

Best Small Tube

Why the 3M 08581 Black is our pick

The 3M 08581 is the small tube pick because it is the same black super weatherstrip adhesive as the 08008, in a 2 fl oz tube. The listing describes the same flexible waterproof bond for rubber weatherstripping and gaskets, in a size that suits one door seal or one section of a trunk seal. A 5 fl oz tube is more than a single repair needs, and an opened tube does not keep forever, so the small tube means no wasted adhesive. For a driver fixing one peeling seal before winter, this is the right size at the right outlay.

3M 08581 Black key specs

  • Type: Super weatherstrip and gasket adhesive
  • Colour: Black
  • Size: 2 fl oz tube
  • Bond: Flexible, waterproof
  • Use: Single seal or section repair
  • Maker: 3M
  • Part number: 08581
  • Resists: Vibration, oils, solvents per maker
  • Application: Spread from tube
  • Listing: Verified
  • Warranty: Not published
  • Weight: Per listing

3M 08581 Black: fits and best for

This adhesive fits a driver fixing one peeling door or trunk seal, or a buyer who wants to try the 3M adhesive before committing to the big tube. It suits a single repair where a 5 fl oz tube would mostly go to waste.

3M 08581 Black pros and watch-outs

  • Same 3M adhesive, smaller tube
  • Right size for one seal
  • No wasted adhesive
  • Black colour hides the joint
  • Flexible waterproof bond
  • Too small for a full car
  • Costs more per ounce than the big tube
  • Strong fumes, ventilate well
  • Not the right pick for EPDM rubber

3M 08581 Black: what owners report

Owner reports in retailer reviews commonly note the 2 fl oz tube is enough for one door seal with a little left over, and the bond holds through a winter.

Owners also report the small tube is easier to control on a narrow seal channel, though some note it runs out fast on a full car.

3M 08581 Black: who should not buy

Do not buy this for a full set of seals, because 2 fl oz will not cover four doors and a trunk. Buy the 5 fl oz 08008 for a full car.

3M 08581 Black: pair it with

Pair it with a small acid brush, so the thin coat goes exactly where the seal channel needs it.

We may earn a commission at no cost to you.

Buy the small tube for one seal and the big tube for a full car: an opened tube does not keep forever. Best Tool Storage

Best Silicone Option: Permatex 81158 Black Silicone Adhesive Sealant, 3 oz Tube

Best Silicone Option

Why the Permatex 81158 is our pick

The Permatex 81158 is the silicone pick because it is a different chemistry for a different job. The listing describes a black silicone adhesive sealant in a 3 oz tube, a general purpose RTV that bonds, seals and repairs glass, metal, plastics, fabric, vinyl and weather stripping, with a temperature range from minus 75 to 450 degrees Fahrenheit. Where the weatherstrip adhesives glue a seal into its channel, this silicone fills and seals gaps, beds a seal and repairs a split, staying flexible across a huge temperature range. The maker notes surfaces may need clamping for an hour until the silicone firms. For a leaky seal or a gap that needs filling rather than gluing, this is the tool.

Permatex 81158 key specs

  • Type: Black RTV silicone adhesive sealant
  • Colour: Black
  • Size: 3 oz tube
  • Temperature range: Minus 75 to 450 F per listing
  • Use: Weather stripping, glass, vinyl tops, seams
  • Sensor safe: Yes, per listing
  • Cure: Clamp up to 1 hour until firm per maker
  • Maker: Permatex
  • Part number: 81158
  • UPC: 686226811585 per listing
  • Listing: Verified
  • Warranty: Not published

Permatex 81158: fits and best for

This sealant fits an owner sealing a gap, bedding a seal or repairing a split weatherstrip, rather than gluing a new seal in. It suits windshields, door frames, seams and vinyl tops, where a flexible silicone fill is what the job needs.

Permatex 81158 pros and watch-outs

  • Huge temperature range, minus 75 to 450 F
  • Seals gaps, not just glues
  • Sensor safe RTV
  • Stays flexible outdoors
  • Works on glass, metal and vinyl
  • Not a weatherstrip glue for new seals
  • Needs clamping until firm
  • Small 3 oz tube
  • Warranty not published in the listing

Permatex 81158: what owners report

Owner reports in retailer reviews commonly note the 81158 seals a leaky windshield or door frame gap and stays flexible through summer heat and winter cold.

Owners also report it needs clamping while it firms, though some note a little goes a long way on a narrow gap. Top Ten Reviewed lists the 81158 among its weather stripping options.

Permatex 81158: who should not buy

Do not buy this to glue a new rubber seal into its channel, because that is a weatherstrip adhesive job. This silicone seals and fills; it does not replace the glue.

Permatex 81158: pair it with

Pair it with masking tape, so the silicone stays off the paint while it cures.

We may earn a commission at no cost to you.

Clamp or tape the joint for an hour: silicone that moves while it firms will not seal. Best Tow Ropes Under 100

Best Classic Yellow: 3M Yellow Super Weatherstrip and Gasket Adhesive, 08001, 5 fl oz

Best Classic Yellow

Why the 3M 08001 Yellow is our pick

The 3M 08001 is the classic pick because it is the original yellow super weatherstrip adhesive. The 5 fl oz tube holds the same flexible bond as the black 08008, with a service temperature range from minus 20 to 300 degrees Fahrenheit per the maker data sheet, and it bonds rubber weatherstripping and gaskets to metal. Yellow disappears on a light coloured seal where black would show. One honest limit from the maker data sheet: for EPDM rubber, use the 08011 adhesive instead.

3M 08001 Yellow key specs

  • Type: Super weatherstrip and gasket adhesive
  • Colour: Yellow
  • Size: 5 fl oz tube
  • Bond: Flexible, waterproof
  • Service temperature: Minus 20 to 300 F per maker
  • Use: Rubber weatherstripping and gaskets
  • Maker: 3M
  • Part number: 08001
  • EPDM: Use 08011 per maker data sheet
  • Listing: Written alternative
  • Warranty: Not published
  • Rank: Not published

3M 08001 Yellow: fits and best for

This adhesive fits a restorer who wants the original yellow formula, or an owner with light coloured seals where a black glue would show. It suits the same door, trunk and hood seal work as the black 08008.

3M 08001 Yellow pros and watch-outs

  • The original classic formula
  • Bonds rubber weatherstripping to metal
  • Yellow hides on light seals
  • Same flexible bond as the black tube
  • Wide service temperature range
  • No verified Amazon listing in this guide
  • Yellow shows on dark seals
  • Strong fumes, ventilate well
  • Not the right pick for EPDM rubber

3M 08001 Yellow: what owners report

Owner reports in retailer reviews commonly note the yellow 08001 has held seals on classics for decades, and mechanics keep a tube on the shelf for gasket work.

Owners also report it bonds best on clean dry metal, though some note the yellow colour is a poor match on black seals. Motors and Pump lists the 3M weatherstrip adhesive among its gasket picks.

3M 08001 Yellow: who should not buy

Do not buy this for a black seal, because the yellow glue will show at the edges. Buy the black 08008 for dark seals.

3M 08001 Yellow: pair it with

Pair it with a clean rag and solvent, so the channel is spotless before the yellow glue goes on.

We could not verify a live Amazon listing for the 3M 08001 Yellow at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the 3M 08008 black adhesive.

We may earn a commission at no cost to you.

Check the seal material first: for EPDM rubber the maker directs you to the 08011 adhesive, not this one. Battery Tender Junior vs NOCO Genius1

Spec comparison

Spec 3M 08008 Black Permatex 81850 3M 08581 Black Permatex 81158 3M 08001 Yellow
Colour Black Black Black Black Yellow
Size 5 fl oz 5 oz 2 fl oz 3 oz 5 fl oz
Bond Flexible, waterproof Flexible Flexible, waterproof RTV silicone, flexible Flexible, waterproof
Temperature range Per maker Per maker Per maker Minus 75 to 450 F Minus 20 to 300 F
Use Seals and gaskets Seals and gaskets Single seal repair Gaps, glass, vinyl Seals and gaskets
EPDM rubber Use 08011 per maker Check maker guidance Use 08011 per maker Per maker Use 08011 per maker
Clamping Tape or hold while curing Tape or hold while curing Tape or hold while curing Clamp 1 hour until firm Tape or hold while curing
Maker 3M Permatex 3M Permatex 3M
Part number 08008 81850 08581 81158 08001
UPC 051135080085 686226818508 Per listing 686226811585 Per listing
Listing Verified Verified Verified Verified Written alternative
Check Price Check Price Check Price Check Price Check Price We could not verify a live Amazon listing for the 3M 08001 Yellow at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the 3M 08008 black adhesive. Check Price

How to use weatherstrip adhesive

Pull the old seal out and clean the channel until it is bare metal, using a scraper and solvent to remove every trace of old glue. A new bond will not hold on old adhesive, so this step decides the whole job. Test fit the new seal dry first, so you know it sits right before any glue is involved. Warning Lights Reviews

Apply a thin even coat to both the channel and the seal, then let it turn tacky before you press them together. Press the seal into the channel a section at a time, working from one end to the other, and tape it in place so it cannot creep while the adhesive cures. Best First Aid Kit Under 50

Leave the car alone overnight before you drive it, so the adhesive reaches a full cure before the seal sees wind, rain or a door slam. Check the edges the next morning and press down any corner that has lifted, before it becomes a whistle. ABS Scan Tools vs OBDII

Safety essentials

  • Work in fresh air: weatherstrip adhesive fumes are strong.
  • Keep the adhesive off paint and trim, it is hard to remove.
  • Never glue a seal onto old adhesive or a dirty channel.
  • Tape the seal in place while it cures, do not rely on hope.
  • Check the rubber type first, EPDM needs the right adhesive.
  • Wear gloves, the adhesive bonds skin as well as rubber.

Weatherstrip adhesive is a contact adhesive with strong fumes, so ventilation and gloves are the minimum. The bond itself is the easy part; the cleaning is the job.

Anker 320 24W Dual-USB Mini Car Charger, to keep a phone charged while you work.

LISEN 48W USB C Car Charger Adapter 2 Pack, so a phone and a second device stay charged.

UGREEN 130W USB C Car Charger with Cable, for fast charging on long days away from home.

Troubleshooting

Most weatherstrip failures trace to a dirty channel, a rushed tack stage or the wrong adhesive for the rubber, and the fix is usually a clean redo rather than more glue. ABS Scan Tools vs OBDII

Symptom Likely cause Fix
Seal peels at the corner Old adhesive left in the channel Strip the channel to bare metal and redo it
Bond feels weak after a day Pressed before the coat turned tacky Let the coat turn tacky, then press and tape
Seal creeps out of the channel Driven before the cure finished Leave the car overnight before driving
Glue shows on the seal edge Wrong colour for the seal Use black on dark seals, yellow on light seals
Adhesive will not stick to the rubber Wrong adhesive for EPDM rubber Use the 08011 adhesive for EPDM per the maker
Tube skins over in the nozzle Tube left open between sections Cap the tube and work one section at a time

Who should NOT buy these

Do not buy weatherstrip adhesive without checking the rubber. EPDM seals need the 08011 adhesive per the 3M data sheet, and the wrong tube will not hold. AGM Batteries Review for Cars

Do not buy a 5 fl oz tube for one small seal. An opened tube does not keep forever, and a 2 fl oz tube covers a single repair with nothing wasted. AGM Batteries Cost

Do not buy silicone to glue a new seal in. Silicone seals gaps and fills splits, but a new seal needs a weatherstrip adhesive to bond it into the channel. AGM Batteries vs Flooded

Do not buy the yellow tube for a black seal. The glue shows at the edges, and a careful job will look careless. Match the colour to the seal. AGM Batteries vs Lead-Acid

Final verdict

Best Overall: 3M 08008 Black Check Price — the weatherstrip adhesive most shops reach for first.

Best Value: Permatex 81850 Check Price — the best value weatherstrip adhesive here.

Best Small Tube: 3M 08581 Black Check Price — the right size for a single seal repair.

Best Silicone Option: Permatex 81158 Check Price — the best silicone sealant for gaps and splits.

Best Classic Yellow: 3M 08001 Yellow We could not verify a live Amazon listing for the 3M 08001 Yellow at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the 3M 08008 black adhesive. Check Price — the classic yellow adhesive, as a written alternative.

FAQ

What is weatherstrip adhesive?

Weatherstrip adhesive is a flexible contact adhesive that glues a rubber door, trunk or hood seal into its metal channel. You apply a thin coat to both surfaces, let it turn tacky, press the seal in and hold it while it cures. The bond stays flexible so the seal survives every door slam, and it resists water, oil and heat.

Is 3M 08008 or 08001 better for weatherstripping?

They are the same adhesive in different colours. The 08008 is black and the 08001 is yellow, and both form a flexible waterproof bond for rubber weatherstripping and gaskets. Pick black for dark seals and yellow for light coloured seals, because the glue shows at the edges. The 08008 is the verified listing in this guide.

Can weatherstrip adhesive be used on EPDM rubber?

Not the 08001 or 08008, according to the 3M data sheet, which directs EPDM work to the 08011 adhesive instead. Check what your seal is made of before you buy, because a tube that bonds one rubber can fail on another. If your seal is EPDM, buy the adhesive the maker specifies for it.

How long does weatherstrip adhesive take to cure?

The coat turns tacky in minutes, which is when you press the seal in, and the bond needs overnight before the car is driven. Tape the seal in place while it cures so it cannot creep out of the channel. Silicone sealant is different: the maker notes it may need clamping for an hour until it firms.

Can I use silicone sealant instead of weatherstrip adhesive?

No, not to glue a new seal in. Silicone sealant fills gaps, beds a seal and repairs a split, and it stays flexible across a wide temperature range, but it is not a weatherstrip glue. Use the adhesive for a new seal and the silicone for a gap, a leak or a split in an old seal.

How do I remove old weatherstrip adhesive?

Pull the old seal out, then scrape the channel and wipe it with solvent until it is bare metal. A new bond will not hold on old adhesive, so this cleaning step decides the whole job. Test fit the new seal dry before any glue is involved, so you know it sits right.

Why is my door seal peeling at the corner?

The corner is where the seal flexes most and where a dirty channel shows first. Old adhesive left in the channel, a coat pressed before it turned tacky, or driving before the cure finished are the usual causes. Strip the channel to bare metal, let the coat turn tacky, press, tape and leave the car overnight.

What size tube do I need for a full car?

A 5 fl oz tube covers a full set of door, trunk and hood seals with some left over. A 2 fl oz tube covers one door seal. Buy the size that matches the job, because an opened tube does not keep forever, and a tube that is too small will stall a full car job.

Is weatherstrip adhesive waterproof?

Yes, once cured the bond is waterproof, which is why it survives rain and car washes. The 3M adhesive also resists vibration, oils, solvents and detergents. The waterproof claim only holds if both surfaces were clean and the coat turned tacky before pressing, so the method matters as much as the tube.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz

Leave a Comment