A quarter panel has to come off, and welding it back on will warp the thin sheet metal. A modern body adhesive bonds the panel as solidly as a weld, without the heat, and the car leaves the shop with a repair that lasts.
The adhesive you choose decides whether that bond lasts. A two-part epoxy bonds steel, aluminium, SMC and fibreglass, and it cures to a bond as strong as a weld on non-structural panels. A urethane adhesive stays flexible, which suits a bumper or a plastic part that flexes. Spacer beads keep the bond line even, and a long work time lets you fit the panel properly.
This guide compares four auto body adhesives, from an OEM-recommended 3M epoxy to a flexible Evercoat urethane, so you can pick the one that matches the panel you are bonding.
The 30-second answer
Buy the 3M Panel Bonding Adhesive 08115, 200 mL Cartridge, Two-Part Epoxy Check Price for the best overall panel bond. Buy the 3M Panel Bonding Adhesive 08116, 200 mL Cartridge, Black Check Price for a faster cure. Buy the SEM 39747 Multi-Purpose Panel Adhesive, 7 oz. Check Price for a multi-purpose adhesive with spacer beads. Buy the Fiberglass Evercoat FIB-887 Maxim Fast Urethane Adhesive, 250 mL Check Price for a flexible urethane bond on plastics and fibreglass.
How we researched this guide
We profiled four auto body adhesives, checked Amazon listing data for each one through the Creators API, and reviewed maker technical data sheets and owner reports in retailer reviews about bond strength, work time, cure time and which materials each adhesive bonds. Where a listing does not publish a figure, we say so instead of guessing.
Our quick picks
Best Overall
3M Panel Bonding Adhesive 08115, 200 mL Cartridge, Two-Part Epoxy
Best for panel bonding: a 200 mL two-part epoxy cartridge, OEM recommended, that bonds steel, aluminium, SMC and fibreglass body panels.
Best for Fast Cure
3M Panel Bonding Adhesive 08116, 200 mL Cartridge, Black
Best for a faster panel bond: a 200 mL two-part epoxy cartridge with a shorter work time, for panels that need to be handled sooner.
Best Multi-Purpose
SEM 39747 Multi-Purpose Panel Adhesive, 7 oz.
Best for a multi-purpose panel adhesive: a 7 oz two-part epoxy with spacer beads for a consistent bond line, for steel, aluminium, SMC and fibreglass.
Best Urethane Adhesive
Fiberglass Evercoat FIB-887 Maxim Fast Urethane Adhesive, 250 mL
Best for a fast urethane adhesive: a 250 mL urethane repair material for non-structural repairs on plastics, fibreglass and SMC.
Quick comparison
| Product | Chemistry | Use | Warranty | Check Price |
|---|---|---|---|---|
| 3M Panel Bonding Adhesive 08115, 200 mL Cartridge, Two-Part Epoxy | 200 mL, two-part epoxy | Quarter panels, roofs, door skins | Not published | Check Price |
| 3M Panel Bonding Adhesive 08116, 200 mL Cartridge, Black | 200 mL, two-part epoxy | Panels on a tight schedule | Not published | Check Price |
| SEM 39747 Multi-Purpose Panel Adhesive, 7 oz. | 7 oz, two-part epoxy, spacer beads | Fibreglass and SMC panels | Not published | Check Price |
| Fiberglass Evercoat FIB-887 Maxim Fast Urethane Adhesive, 250 mL | 250 mL, fast urethane | Plastics and fibreglass that flex | Full lifetime warranty per Evercoat | Check Price |
How to choose an auto body adhesive
Chemistry
The chemistry decides what the adhesive can bond and how it behaves after it cures. A two-part epoxy bonds steel, aluminium, SMC and fibreglass, and it cures hard, which suits a body panel. A urethane adhesive stays flexible after it cures, which suits a bumper or a plastic part that flexes. Pick the chemistry for the panel material and for whether the part flexes, not for the price. Best First Aid Kit Under 50
Bond line thickness
The bond line is the thickness of adhesive between the two panels, and it has to be even. A thin spot is a weak spot, and a thick spot is a mess that squeezes out and wastes adhesive. Some adhesives, such as the SEM 39747, have spacer beads that set the thickness automatically. If your adhesive has no spacer beads, use clamps and a consistent bead to keep the line even. ABS Scan Tools vs OBDII
Work time
Work time is how long you have to fit the panel after the adhesive goes on. A 90 minute work time suits a large panel that needs careful fitting, while a shorter work time suits a small panel on a tight schedule. Pick the work time for the size of the panel and for how fast you work: a short work time on a big panel is how a bond goes wrong. AGM Batteries Review for Cars
Cure time
Cure time is how long the bond needs before the panel can be handled, sanded or painted. Most panel adhesives need 24 hours for a full cure, though some can be handled sooner. Never move a panel before the adhesive cures, because a bond that is disturbed while it cures never reaches full strength. Plan the job around the cure time, not around the clock. AGM Batteries Cost
OEM approval
Some adhesives carry an OEM recommendation, which means the car maker has tested them for a specific repair. A panel bonding adhesive should only be used for structural components such as pillars, rockers or frame members when the OEM specifies it. Check the OEM repair procedure for your vehicle before you bond a structural part, because the wrong adhesive there is a safety risk. AGM Batteries vs Flooded
Applicator gun
Panel adhesives come in cartridges that need a dispensing gun, and the gun has to match the cartridge. A 200 mL cartridge needs a 3M manual or pneumatic gun, while a 50 mL cartridge needs a smaller gun. The gun and the mixing nozzles are a separate purchase, so buy them with the adhesive, or the cartridge is useless. AGM Batteries vs Lead-Acid
Auto body adhesives by budget
| Tier | What you get | Example pick |
|---|---|---|
| Multi-purpose tube | A 7 oz two-part epoxy with spacer beads, for steel, aluminium, SMC and fibreglass. | SEM 39747 |
| Mid-range urethane | A 250 mL fast urethane adhesive for plastics and fibreglass that flex. | Evercoat Maxim FIB-887 |
| Premium epoxy cartridge | A 200 mL OEM-recommended two-part epoxy for full panel replacement. | 3M 08115 |
Types of auto body adhesives compared
| Type | How it works | Best for | Watch out for |
|---|---|---|---|
| Two-part epoxy | A hard-curing adhesive that bonds steel, aluminium, SMC and fibreglass. | Quarter panels, roofs, door skins | Stiff cure, not for flexing parts |
| Fast urethane | A flexible adhesive that stays pliable after cure. | Bumpers, brackets, plastic parts | Non-structural repairs only |
| Panel bonding adhesive | An epoxy made for outer body panels. | Non-structural panel replacement | Needs a dispensing gun |
| Multi-purpose adhesive | An epoxy with spacer beads for an even bond line. | Mixed materials, fibreglass and SMC | Smaller tube, less coverage |
Detailed reviews
Each adhesive below is a verified Amazon listing, checked live through the Creators API. Read the chemistry and the materials it bonds before you buy, because those two decide whether it matches your panel.
Best Overall: 3M Panel Bonding Adhesive 08115, 200 mL Cartridge, Two-Part Epoxy
Best Overall
Why the 3M 08115 is our pick
The 3M Panel Bonding Adhesive 08115 is the overall pick because it is the adhesive body shops use for outer panel replacement, and it carries an OEM recommendation. The listing describes a 200 mL cartridge of two-part epoxy that bonds steel, aluminium, SMC and traditional fibreglass, and 3M calls it OEM recommended for auto body panel repair. A two-part epoxy cures to a bond that is as strong as a weld on non-structural panels, without the heat that warps thin sheet metal. Roundups list the 08115 among the best panel bonding adhesives, and note it is the standard for quarter panels, roofs, door skins and box sides. For a body panel repair that has to last, this is the pick.
3M 08115 key specs
- Type: Two-part epoxy panel bonding adhesive
- Size: 200 mL cartridge
- Bonds: Steel, aluminium, SMC, FRP fibreglass
- Use: Outer body, non-structural panels
- OEM: Recommended per 3M
- Colour: Black
- Work time: 90 minutes per 3M
- Full cure: 24 hours per 3M
- Applicator: 3M manual or pneumatic gun
- Maker: 3M
- Case: 6 cartridges per case per listing
- Listing: Verified
3M 08115: fits and best for
This adhesive fits a body shop or a serious restorer who replaces outer body panels and needs an OEM-recommended bond. It suits quarter panels, roofs, door skins, box sides and van sides, and anyone who wants a bond as strong as a weld without the heat.
3M 08115 pros and watch-outs
- OEM recommended by 3M
- Bonds steel, aluminium, SMC and fibreglass
- 200 mL covers a full panel
- No heat, so no warped sheet metal
- Trusted 3M brand
- Needs a 3M applicator gun, sold separately
- 90 minute work time needs planning
- 24 hour full cure
- Warranty not published in the listing
3M 08115: what owners report
Owner reports in retailer reviews commonly note the 08115 bonds a quarter panel as solidly as a weld, and the 200 mL cartridge covers a full panel with adhesive to spare.
Owners also report the bond holds up for years, though some note the applicator gun is a separate purchase, so the real cost is higher than the cartridge alone. A roundup of panel bonding adhesives lists the 3M 08115 as the top pick.
3M 08115: who should not buy
Do not buy this if you need to bond a structural component such as a pillar or a rocker, because panel bonding adhesive is for non-structural panels unless the OEM specifies it. Check the OEM repair procedure first.
3M 08115: pair it with
Pair it with a 3M manual applicator gun and static mixing nozzles, so the two parts mix properly and the bond cures evenly.
We may earn a commission at no cost to you.
Clamp the panel and leave it for the full cure time: moving a panel before the adhesive cures is how a bond fails. 12V Car Heaters Reviews Best Models
Best for Fast Cure: 3M Panel Bonding Adhesive 08116, 200 mL Cartridge, Black
Best for Fast Cure
Why the 3M 08116 is our pick
The 3M Panel Bonding Adhesive 08116 is the fast-cure pick because it is the same two-part epoxy as the 08115, in a 200 mL cartridge, with a shorter work time that suits a busy shop. The listing describes a 200 mL cartridge of panel bonding adhesive in black, for bonding steel, aluminium, SMC and fibreglass body panels. A two-part epoxy cures to a bond that is as strong as a weld on non-structural panels, without the heat that warps thin sheet metal.
3M 08116 key specs
- Type: Two-part epoxy panel bonding adhesive
- Size: 200 mL cartridge
- Bonds: Steel, aluminium, SMC, FRP fibreglass
- Use: Outer body, non-structural panels
- Colour: Black
- Work time: Shorter than 08115 per 3M
- Full cure: Per 3M
- Applicator: 3M manual or pneumatic gun
- Maker: 3M
- Case: Per listing
- Rating: Per listing
- Listing: Verified
3M 08116: fits and best for
This adhesive fits a body shop that needs to handle a bonded panel sooner, and wants the same two-part epoxy as the 08115 with a shorter work time. It suits quarter panels, roofs, door skins and box sides, and anyone who works on a tight schedule.
3M 08116 pros and watch-outs
- Same epoxy as the 08115
- Shorter work time, faster handling
- 200 mL covers a full panel
- No heat, so no warped sheet metal
- Trusted 3M brand
- Needs a 3M applicator gun, sold separately
- Shorter work time leaves less room for error
- Full cure time not published in the listing
- Warranty not published in the listing
3M 08116: what owners report
Owner reports in retailer reviews commonly note the 08116 bonds a panel as solidly as the 08115, and the shorter work time suits a shop that needs to move a panel sooner.
Owners also report the bond holds up for years, though some note the shorter work time leaves less room to adjust the panel, so the fit has to be right before the adhesive goes on. A roundup of panel bonding adhesives lists the 3M 08116 alongside the 08115.
3M 08116: who should not buy
Do not buy this if you are bonding a large panel for the first time, because the shorter work time leaves less room to adjust the fit. The 08115 above gives you 90 minutes to get it right.
3M 08116: pair it with
Pair it with a 3M manual applicator gun and static mixing nozzles, so the two parts mix properly and the bond cures evenly.
We may earn a commission at no cost to you.
Dry-fit the panel first and mark the position: with a shorter work time, there is no time to adjust the fit after the adhesive goes on. 12V Car Heaters vs AC
Best Multi-Purpose: SEM 39747 Multi-Purpose Panel Adhesive, 7 oz.
Best Multi-Purpose
Why the SEM 39747 is our pick
The SEM 39747 is the multi-purpose pick because it is a two-part epoxy that bonds steel, aluminium, SMC and fibreglass, and it has spacer beads that keep the bond line the same thickness across the whole panel. The listing describes a 7 oz tube of multi-purpose panel adhesive with a long working time and spacer beads for a consistent bond line thickness, and a full cure in 24 hours. A consistent bond line matters: a thin spot is a weak spot, and a thick spot is a mess. Roundups list the SEM 39747 among the best panel bonding adhesives, and note it is the choice for fibreglass and SMC panels as well as steel. For a panel repair that needs a consistent bond, this is the pick.
SEM 39747 key specs
- Type: Two-part epoxy panel adhesive
- Size: 7 oz
- Bonds: Steel, aluminium, SMC, fibreglass
- Features: Spacer beads for consistent bond line
- Work time: Long, per the listing
- Full cure: 24 hours
- Use: Exterior and interior panels
- Form: Liquid, two-part
- Maker: SEM
- Colour: Per listing
- Rating: Per listing
- Listing: Verified
SEM 39747: fits and best for
This adhesive fits a restorer or a body shop that bonds fibreglass and SMC panels as well as steel, and wants a consistent bond line across the whole panel. It suits Corvettes, kit cars, boats and trucks with composite panels, and anyone who wants a long working time.
SEM 39747 pros and watch-outs
- Spacer beads keep the bond line even
- Bonds fibreglass and SMC as well as steel
- Long working time
- 7 oz is enough for a panel
- Trusted SEM brand
- Smaller than a 200 mL cartridge
- Needs a dispensing gun per the listing
- 24 hour full cure
- Warranty not published in the listing
SEM 39747: what owners report
Owner reports in retailer reviews commonly note the SEM 39747 bonds fibreglass and SMC panels as solidly as steel, and the spacer beads keep the bond line even across the panel.
Owners also report the long working time suits a careful fit, though some note the 7 oz tube is smaller than a 200 mL cartridge, so it covers less area. A roundup of autobody panel adhesives lists the SEM 39747 among its top picks.
SEM 39747: who should not buy
Do not buy this if you need to bond a full-size steel quarter panel, because a 7 oz tube may not cover it. The 200 mL 3M cartridges above cover more area.
SEM 39747: pair it with
Pair it with a dispensing gun that fits the cartridge, so the two parts mix properly and the bond cures evenly.
We may earn a commission at no cost to you.
Spread the adhesive in a continuous bead and clamp the panel evenly: the spacer beads set the thickness, but only if the clamp pressure is even. 12V Car Heaters vs Electric Heaters
Best Urethane Adhesive: Fiberglass Evercoat FIB-887 Maxim Fast Urethane Adhesive, 250 mL
Best Urethane Adhesive
Why the Evercoat Maxim FIB-887 is our pick
The Evercoat Maxim FIB-887 is the urethane pick because it is a fast urethane adhesive built for plastics, fibreglass and SMC, where an epoxy is not always the right choice. The listing describes a 250 mL cartridge of Maxim Fast Urethane Adhesive, a urethane repair material for non-structural repairs on all plastics, fibreglass and SMC. It bonds bumper brackets, backing strips, broken SMC and fibreglass pieces, and other broken plastic parts. A urethane adhesive stays flexible after it cures, which suits a bumper or a plastic part that flexes, where a stiff epoxy would crack. Roundups list the Maxim range among the best for plastic and fibreglass repair. For a plastic or fibreglass repair that needs to flex, this is the pick.
Evercoat Maxim FIB-887 key specs
- Type: Fast urethane adhesive
- Size: 250 mL cartridge
- Bonds: Plastics, fibreglass, SMC
- Use: Non-structural repairs
- Form: Urethane, two-part
- Flex: Stays flexible after cure
- Maker: Evercoat
- Colour: Per listing
- Work time: Per listing
- Full cure: Per listing
- Rating: Per listing
- Listing: Verified
Evercoat Maxim FIB-887: fits and best for
This adhesive fits a body shop or a restorer who repairs plastic and fibreglass parts that flex, such as bumpers, brackets and SMC panels. It suits cars, trucks and boats with composite parts, and anyone who needs a bond that stays flexible.
Evercoat Maxim FIB-887 pros and watch-outs
- Stays flexible after cure
- Bonds plastics, fibreglass and SMC
- 250 mL covers a good area
- Fast urethane, quick handling
- Full lifetime warranty from Evercoat
- Non-structural repairs only
- Not for steel panels
- Work time not published in the listing
- Needs a dispensing gun per the listing
Evercoat Maxim FIB-887: what owners report
Owner reports in retailer reviews commonly note the Maxim urethane adhesive bonds a broken bumper bracket as solidly as new, and the flexible cure means the repair does not crack when the bumper flexes.
Owners also report the 250 mL cartridge covers several repairs, though some note it is not the right choice for a steel panel, where an epoxy panel adhesive is better. The Evercoat technical data sheet lists the Maxim range for plastics, fibreglass and SMC.
Evercoat Maxim FIB-887: who should not buy
Do not buy this for a steel body panel, because a urethane adhesive is for plastics and fibreglass, not steel. The 3M panel adhesives above bond steel.
Evercoat Maxim FIB-887: pair it with
Pair it with a dispensing gun that fits the cartridge, so the two parts mix properly and the bond cures evenly.
We may earn a commission at no cost to you.
Roughen the plastic with sandpaper before you apply the adhesive: a smooth plastic surface gives a weak bond. 12V Heater Review
Spec comparison
| Spec | 3M 08115 | 3M 08116 | SEM 39747 | Evercoat Maxim FIB-887 |
|---|---|---|---|---|
| Type | Two-part epoxy | Two-part epoxy | Two-part epoxy | Fast urethane |
| Size | 200 mL | 200 mL | 7 oz | 250 mL |
| Bonds | Steel, aluminium, SMC, FRP | Steel, aluminium, SMC, FRP | Steel, aluminium, SMC, fibreglass | Plastics, fibreglass, SMC |
| Work time | 90 minutes | Shorter than 08115 | Long | Per listing |
| Full cure | 24 hours | Per listing | 24 hours | Per listing |
| Bond line | Per listing | Per listing | Spacer beads | Per listing |
| Flex | Hard cure | Hard cure | Hard cure | Stays flexible |
| OEM | Recommended per 3M | Per listing | Per listing | Per listing |
| Applicator | 3M gun needed | 3M gun needed | Dispensing gun | Dispensing gun |
| Warranty | Not published | Not published | Not published | Full lifetime per Evercoat |
| Listing | Verified | Verified | Verified | Verified |
| Check Price | Check Price | Check Price | Check Price | Check Price |
How to bond a body panel with adhesive
Dry-fit the panel first, and mark its position with tape, because there is no time to adjust the fit after the adhesive goes on. Clean both mating surfaces to bare metal or to the primer the adhesive needs, and roughen them with sandpaper so the adhesive has something to grip. A dirty or smooth surface gives a weak bond, no matter how good the adhesive is. Best Car Buffer for Home Use
Load the cartridge into the dispensing gun, fit a static mixing nozzle, and purge a short bead until the two parts mix evenly. Apply a continuous bead to one surface, fit the panel to your marks, and clamp it evenly so the bond line stays the same thickness. Wipe away any adhesive that squeezes out before it cures. 12V Adapters Reviews for Cars
Leave the panel clamped for the full cure time, and do not move it, sand it or paint it until the adhesive has cured. A bond that is disturbed while it cures never reaches full strength. After the cure, check the bond line for gaps, and fill any voids before you prime and paint. 12V Adapters Reviews Best
Safety essentials
- Never bond a structural component unless the OEM specifies it.
- Clean both surfaces to bare metal or the primer the adhesive needs.
- Dry-fit the panel and mark its position before you apply adhesive.
- Use the right dispensing gun and mixing nozzle for the cartridge.
- Clamp the panel evenly and leave it for the full cure time.
- Wear gloves and work in a ventilated area.
Body panel adhesive bonds a panel as solidly as a weld when it is applied properly, so these rules keep the bond strong and the job safe.
Anker 320 24W Dual-USB Mini Car Charger, to keep a phone charged while you work.
LISEN 48W USB C Car Charger Adapter 2 Pack, so a phone and a second device stay charged.
UGREEN 130W USB C Car Charger with Cable, for fast charging on long days away from home.
Troubleshooting
Most panel bonding faults trace to a dirty surface, a wrong gun, or a panel moved before the cure, and the fix is usually a check rather than a replacement. 12V Adapters Reviews Best
| Symptom | Likely cause | Fix |
|---|---|---|
| Bond failed after a few months | Surface was dirty or smooth | Clean to bare metal and roughen it before bonding |
| Adhesive did not cure | Wrong gun or nozzle, parts did not mix | Purge the nozzle until the mix is even |
| Bond line is uneven | Clamp pressure was uneven | Clamp evenly and check the bond line |
| Panel moved during cure | Clamps were removed too soon | Leave the panel clamped for the full cure time |
| Adhesive squeezed out everywhere | Too much adhesive applied | Apply a thinner, continuous bead |
| Bond is weak on plastic | Plastic was not roughened | Sand the plastic before you apply the adhesive |
Who should NOT buy these
Do not buy panel bonding adhesive for a structural repair unless the OEM specifies it. Panel adhesive is for non-structural outer panels, and using it on a pillar or a rocker without an OEM procedure is a safety risk. Check the OEM repair procedure first. 12V Adapters for Beginners Guide
Do not buy an adhesive cartridge without the right gun. A 200 mL cartridge needs a 3M manual or pneumatic gun, and the wrong gun will not dispense it. Buy the gun and the mixing nozzles with the adhesive. 12V Adapters Review Amazon
Do not buy a urethane adhesive for a steel panel. Urethane is for plastics and fibreglass that flex, not for steel. A two-part epoxy panel adhesive bonds steel. 12V Adapters Alternative for LED Lights
Do not buy panel adhesive and skip the dry fit. A panel that does not fit before the adhesive goes on will not fit after it, and a short work time leaves no room to fix it. Dry-fit and mark the position first. 12V Adapters Alternative to USB
Final verdict
Best Overall: 3M 08115 Check Price — the best panel bonding adhesive in this guide.
Best for Fast Cure: 3M 08116 Check Price — the fastest 3M panel bond in this guide.
Best Multi-Purpose: SEM 39747 Check Price — the best multi-purpose panel adhesive in this guide.
Best Urethane Adhesive: Evercoat Maxim FIB-887 Check Price — the best urethane adhesive in this guide.
FAQ
What is auto body adhesive used for?
Auto body adhesive bonds outer body panels such as quarter panels, roofs, door skins, box sides and van sides, without welding. A two-part epoxy cures to a bond as strong as a weld on non-structural panels, without the heat that warps thin sheet metal. It is also used to reinforce welded or riveted joints, and to bond SMC and fibreglass panels.
Is panel bonding adhesive as strong as welding?
On non-structural outer panels, yes. A two-part epoxy panel adhesive cures to a bond that is as strong as a weld, and it spreads the load across the whole bond line instead of concentrating it at weld spots. But it is not a substitute for welding on structural components such as pillars, rockers or frame members, unless the OEM specifies it.
Can I use panel bonding adhesive on a structural repair?
Only when the OEM repair procedure specifies it. Panel bonding adhesive is made for outer body, non-structural panels, and it should only be used on structural components such as pillars, rockers or frame members when the car maker specifies it. Check the OEM repair procedure for your vehicle before you bond a structural part.
How long does panel bonding adhesive take to cure?
Most panel adhesives need 24 hours for a full cure, though some can be handled sooner. The work time, which is how long you have to fit the panel, ranges from about 45 minutes to 90 minutes depending on the product. Never move, sand or paint a panel before the adhesive has cured, because a bond disturbed while it cures never reaches full strength.
Do I need a special gun for panel bonding adhesive?
Yes. Panel adhesives come in cartridges that need a dispensing gun, and the gun has to match the cartridge. A 200 mL cartridge needs a 3M manual or pneumatic gun, while a 50 mL cartridge needs a smaller gun. The gun and the static mixing nozzles are a separate purchase, so buy them with the adhesive.
What is the difference between 3M 08115 and 08116?
Both are 200 mL two-part epoxy panel bonding adhesives from 3M, for the same materials and the same use. The 08115 has a 90 minute work time, which suits a large panel that needs careful fitting. The 08116 has a shorter work time, which suits a shop that needs to handle a bonded panel sooner. Pick the work time for the size of the panel and for how fast you work.
Can panel bonding adhesive bond fibreglass?
Yes. Two-part epoxy panel adhesives bond steel, aluminium, SMC and traditional fibreglass, which is why they are used on Corvettes, kit cars and trucks with composite panels. A urethane adhesive such as Evercoat Maxim is also made for fibreglass and SMC, and it stays flexible after it cures, which suits a part that flexes.
Why does my panel adhesive bond keep failing?
The usual causes are a dirty or smooth surface, the wrong gun or nozzle so the two parts did not mix, or a panel moved before the cure. Clean both surfaces to bare metal or the primer the adhesive needs, roughen them with sandpaper, purge the nozzle until the mix is even, and leave the panel clamped for the full cure time.
Is auto body adhesive safe to use at home?
Yes, with care. Work in a ventilated area, wear gloves and eye protection, and keep the adhesive off your skin, because the two-part chemistry can irritate it. Read the safety data sheet before you use it, and keep the cartridge and the gun away from children. If you are unsure, have a body shop do the job.
Sources
- Amazon listing, 3M panel bonding adhesive 08115, ASIN B000PEW4MI
- Amazon listing, 3M panel bonding adhesive 08116, ASIN B00063WASQ
- Amazon listing, SEM 39747 multi-purpose panel adhesive, ASIN B000X1E5MA
- Amazon listing, Evercoat Maxim FIB-887 urethane adhesive, ASIN B003HMVMIM
- Top 5 Best Panel Bonding Adhesive, Top5Best
- Top 5 Best Autobody Panel Adhesive, Top5Best
- Evercoat MXM Medium Panel Bond Adhesive Technical Data Sheet
- 3M Panel Bonding Adhesive Technical Data Sheet
- Automotive Adhesive, Auto Body Tool Mart
- Best Wire Connectors, Family Handyman
By Leo, Founder, WinchInsider
Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.
Related guides
- Best ATV Winch
- Best Jump Starter
- Best Portable Air Compressor
- Best Engine Oil
- Best Automotive Multimeters vs Watts
- Best Automotive Borescope for Mechanics
3M Panel Bonding Adhesive 08115, 200 mL Cartridge, Two-Part Epoxy