Best Alignment Tools DIY: 4 Picks for Home Alignment

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Your car pulls to one side, the front tyres wear on the inside edge, and the steering wheel sits crooked when the car drives straight. A shop alignment fixes all three, and costs you a visit every time you change a suspension part or fit new tyres.

A DIY alignment tool reads the angles as numbers on a display, so there is no needle to guess at and no tape to misread. The Tenhulzen kit gives a readout, the QuickTrick kit carries a gauge, and the SPC gauge reads to a tenth of a degree.

This guide sorts four DIY alignment tools, from toe plates to a full camber, caster and toe kit, so you can pick the one that matches your car, your wheels and the jobs you actually do at home.

The 30-second answer

Buy the Tenhulzen Automotive 2-Wheel Alignment Tool (written alternative — see below) for the best all-round kit here. Buy the QuickTrick Portable Wheel Alignment Kit 4th Gen Check Price for the best complete kit on Amazon. Buy the Longacre Toe-In Plates 52-79501 Check Price for the fastest toe check. Buy the SPC Performance FasTrax Camber/Caster Gauge 91000 Check Price for the best camber and caster gauge.

How we researched this guide

We profiled four DIY alignment tools, checked Amazon listing data for three of them through the Creators API, and reviewed maker documents and owner reports about the gauge type, the angles measured, accuracy and wheel size. Where a listing does not publish a figure, we say so instead of guessing. One pick is a written alternative because its listing could not be verified.

Our quick picks

Best Overall

Tenhulzen Automotive 2-Wheel Alignment Tool

Because it measures all three angles in one setup: camber, caster and toe, with camber accurate to within 0.1 degrees, and the maker states turn plates are not needed for caster — the function is built in. The stand-offs measure toe from the wheel rim, not the tyre.

The Creators API could not verify a live Amazon listing for the Tenhulzen Automotive 2-Wheel Alignment Tool at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the QuickTrick Portable Wheel Alignment Kit 4th Gen.

Closest verified Amazon option in this guide:

Best Complete Kit

QuickTrick Portable Wheel Alignment Kit 4th Gen

Because it is the most complete kit you can buy on Amazon in this guide: the QuickTrick 4th Gen measures caster, camber and toe on any hard surface, fits 13 to 18 inch wheels with tyres up to 30 inches, and is made in the USA with a lifetime parts warranty.

Best Toe Plates

Longacre Toe-In Plates 52-79501

Because they are the fastest way to check toe: the Longacre Toe-In Plates with magnets hold the far end of the tape measure securely, the plates are 23 and a half inches long, two tapes are included, and the maker calls them the quickest and simplest way to measure toe-in — a trackside favourite from ChampCar to Grand-Am.

Best Camber and Caster Gauge

SPC Performance FasTrax Camber/Caster Gauge 91000

Because it is the dedicated gauge for the two angles toe plates cannot measure: the SPC Performance FasTrax Camber/Caster Gauge 91000 displays camber angles over four degrees, positive or negative, and caster angles from four degrees negative to twelve degrees positive, for wheels from thirteen to eighteen inches in diameter.

Quick comparison

ProductMeasuresUseWarrantyCheck Price
Tenhulzen Automotive 2-Wheel Alignment ToolCamber, caster, toeFull home alignmentNot publishedThe Creators API could not verify a live Amazon listing for the Tenhulzen Automotive 2-Wheel Alignment Tool at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the QuickTrick Portable Wheel Alignment Kit 4th Gen. Check Price
QuickTrick Portable Wheel Alignment Kit 4th GenCaster, camber, toePortable complete kitLifetime parts per makerCheck Price
Longacre Toe-In Plates 52-79501Toe onlyFast toe checkNot publishedCheck Price
SPC Performance FasTrax Camber/Caster Gauge 91000Camber, casterCamber and caster setup1 year per makerCheck Price

How to choose a DIY alignment tool

Decide which angles you need to measure

Toe, camber and caster are three different angles, and a tool that measures only toe cannot set camber. If you only adjust toe after a tie-rod change, toe plates are enough. If you change springs, control arms or camber bolts, you need camber and caster too, and only the Tenhulzen and QuickTrick picks here measure all three in one setup. Buy the angles your jobs need, not the tool with the longest feature list. Best Tow Ropes Under 100

Measure from the rim, not the tyre

A tyre sidewall bulges, wears unevenly and throws a toe reading off by more than the adjustment you are trying to make. The Tenhulzen kit measures toe from the wheel rim through stand-offs, and its maker states that plainly; the Longacre plates lean against the tyre, so the tyre must be in good shape and at the same pressure. Rim-based readings are more accurate, and the guide says which pick uses which. Battery Tender Junior vs NOCO Genius1

Check the wheel size before ordering

Alignment tools are sized by wheel diameter, and the wrong size is a return. The QuickTrick 4th Gen here fits 13 to 18 inch wheels, and the SPC FasTrax 91000 fits 13 to 18 inches per its maker sheet. Measure your wheels, because the number is stamped on the tyre sidewall, and buy the size that fits, not the size that looks right. Warning Lights Reviews

A level floor is part of the tool

Every tool here assumes a flat, level surface, and a sloped driveway makes every reading wrong. Check the floor with a long level before you start, shim the low corner if you must, and always measure with the tyres at road pressure and the steering wheel centred. A gauge that reads true on a level floor lies on a slope. Best First Aid Kit Under 50

Set camber first, then toe

Owners who do this work at home repeat one rule: set the camber first, then set the toe, because a camber change moves the toe. The Longacre instructions state the same order. A tool that lets you check camber and then re-check toe without packing up, like the Tenhulzen and QuickTrick kits, saves a second setup, and a second setup is where most home alignments go wrong. ABS Scan Tools vs OBDII

Know what a two-wheel tool cannot do

A two-wheel system measures one axle at a time, and it cannot do a four-wheel alignment or set thrust angle, the angle of the rear axle to the car. Owners of the Tenhulzen system note that a crooked steering wheel is possible on a solid-rear-axle vehicle, and that the system assumes zero wheel runout. If the rear axle needs setting, that is a shop job, not a home tool job. AGM Batteries Review for Cars

Alignment tools by budget

TierWhat you getExample pick
EntryA single-angle gauge or a pair of toe plates, for toe checks after small jobsLongacre Toe-In Plates 52-79501, SPC Performance FasTrax 91000
MidA full camber, caster and toe kit for one axle, made in the USATenhulzen Automotive 2-Wheel Alignment Tool, QuickTrick 4th Gen
SpecialistA dedicated gauge for camber and caster after suspension workSPC Performance FasTrax 91000

Types of alignment tools

TypeHow it worksBest forWatch out for
Toe platesLean the plates against the wheels and measure front and rear width with tape measures.Fast toe checks after a tie-rod or tyre changeToe only, no camber or caster
Camber and caster gaugeA gauge mounts on the wheel and reads camber and caster directly.Setting camber and caster after suspension workNo toe reading without an add-on kit
All-in-one 2-wheel kitOne kit measures camber, caster and toe in a single setup.Home alignment on one axleOne axle at a time, no thrust angle
Readout camber gaugeA gauge reads camber and caster as numbers on a display.Fast readings in the garageAngles only, toe needs plates

Detailed reviews

Four products follow, in the order we would buy them for car work. Every figure comes from the maker’s documents or the Sources below. One pick is sold through its maker, and it carries a verified substitute button on every surface.

Best Overall: Tenhulzen Automotive 2-Wheel Alignment Tool

Best Overall

Why the Tenhulzen 2-Wheel is our pick

The Tenhulzen Automotive 2-Wheel Alignment Tool is the overall pick because it measures all three angles in one setup: camber, caster and toe, with camber accurate to within 0.1 degrees, and the maker states turn plates are not needed for caster. The stand-offs measure toe from the wheel rim, not the tyre, so a worn tyre cannot throw the reading off. It is sold through the maker’s own store, so the button below goes to the closest verified substitute in this guide, the QuickTrick 4th Gen.

Tenhulzen 2-Wheel key specs

  • Model: 3300, 2-Wheel Alignment System
  • Measures: Camber, caster and toe in one setup
  • Camber accuracy: Accurate to within 0.1 degrees
  • Turn plates: Built in
  • Toe method: Stand-offs measure toe from the wheel rim, not the tyre
  • Includes: 2 plates, 2 tape measures, digital readout
  • Dimensions: 23.5 by 9.8 by 2.25 inches
  • Made in: USA
  • Limit: May not work on lifted 4×4 vehicles with tall sidewalls
  • Buying route: Maker store; no verified Amazon ASIN found

Tenhulzen 2-Wheel: fits and best for

Best for a home mechanic who wants camber, caster and toe in one kit, bought through the maker’s store.

Tenhulzen 2-Wheel pros and watch-outs

  • All three angles in one setup
  • Camber accurate to within 0.1 degrees
  • Turn-plate function built in — no extra plates to buy
  • Toe measured from the rim, not the tyre
  • No verified Amazon listing — a written alternative
  • May not work on lifted 4×4 vehicles with tall sidewalls
  • Cannot do a four-wheel alignment
  • Assumes zero wheel runout

Tenhulzen 2-Wheel: what owners report

An owner on Garage Journal reports having the set, and says the kit pays for itself after the second alignment.

A StudioVRM hands-on of the related 4-wheel system, which uses the same gauge calls it cleverly engineered, names the flexible aluminium construction as the weak point, and calls the value excellent.

Tenhulzen 2-Wheel: who should not buy

Skip it if you want a one-click Amazon purchase — this is sold through the maker’s store, and the substitute button goes to the QuickTrick kit instead. Skip it if you drive a lifted 4×4 with tall sidewalls, or if you need a four-wheel alignment.

Tenhulzen 2-Wheel: pair it with

Pair it with a long level for the floor and a tyre pressure gauge — both readings need a level floor and correct pressures.

The Creators API could not verify a live Amazon listing for the Tenhulzen Automotive 2-Wheel Alignment Tool at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the QuickTrick Portable Wheel Alignment Kit 4th Gen.

We may earn a commission at no cost to you.

Buy through the maker store, and check the lifted-vehicle note if you drive a 4×4 — our multimeter guide covers the same check-first habit. AGM Batteries Cost

Best Complete Kit: QuickTrick Portable Wheel Alignment Kit 4th Gen

Best Complete Kit

Why the QuickTrick 4th Gen is our pick

The QuickTrick Portable Wheel Alignment Kit 4th Gen is the best complete kit on Amazon in this guide: it measures caster, camber and toe on any hard surface, fits 13 to 18 inch wheels with tyres up to 30 inches, and is made in the USA with a lifetime parts warranty. The kit travels to the car, so it suits track days as well as the home garage, and the digital gauge is certified and tested by every known authority, per the maker.

QuickTrick 4th Gen key specs

  • Model: 4th Gen, 13 to 18 inch wheels
  • Part number: 416405MCAMZ
  • Manufacturer: Alignment Simple Solutions
  • Measures: Caster, camber and toe on any hard surface
  • Wheel range: 13 to 18 inch wheels, tyres up to 30 inches
  • Includes: 2 verticals, 2 toe bars, 2 tape measures, 2 backup bungees, 6 attachment pins with caps, instructions
  • Made in: USA, with lifetime parts warranty
  • Awards: SEMA Global Media Award for Best New Product
  • Turn plates: Sold separately on the 4th Gen Pro
  • Options: 13 to 22.5 inch wheels by option
  • Buying channel: Verified Amazon listing, ASIN B07WJTJBY7

QuickTrick 4th Gen: fits and best for

Best for a home mechanic or small shop that wants a portable, complete kit on Amazon, and for track-day use where the tool travels to the car.

QuickTrick 4th Gen pros and watch-outs

  • Measures all three angles on any hard surface
  • Made in the USA with a lifetime parts warranty
  • Portable — the kit travels to the car
  • SEMA award for Best New Product
  • Turn plates are sold separately on the Pro version
  • Does not fit wheels over 18 inches
  • Owner coverage for this exact kit is thin in the sources we found
  • The newer 5th Gen string system checks thrust angle

QuickTrick 4th Gen: what owners report

Owner coverage for this exact kit is thin in the sources we found, so the pick stands on the maker documents and the Amazon listing.

The maker states the kit is in use in over 100 countries, and the 4th Gen line carries a SEMA award. Amazon listing.

QuickTrick 4th Gen: who should not buy

Skip it if your wheels are larger than 18 inches — buy the larger option instead. Skip it if you need thrust angle, which only the newer 5th Gen QuickString checks. And skip it if you want a laser reading, since this kit uses gauges and tapes, not a beam.

QuickTrick 4th Gen: pair it with

Pair it with a long level for the floor, and the Tenhulzen toe plates below for a fast toe re-check.

We may earn a commission at no cost to you.

Check the kit contents before ordering — turn plates are sold separately on the Pro version. Our air compressor guide covers checking what a kit actually contains. AGM Batteries vs Flooded

Best Toe Plates: Longacre Toe-In Plates 52-79501

Best Toe Plates

Why the Longacre Toe Plates is our pick

The Longacre Toe-In Plates are the fastest toe check in this guide: the plates are 23 and a half inches long, magnets hold the far end of the tape measure securely, and two tape measures are included, so one person can measure front width and rear width without a helper. The maker calls them the quickest and simplest way to measure toe-in, and they are a trackside favourite from ChampCar to Grand-Am. They measure toe only, so they suit a mechanic who already owns a camber gauge, or a job that only needs toe set after a tie-rod change.

Longacre Toe Plates key specs

  • Part number: 52-79501
  • Plates: 23 and a half inches, with magnets
  • Tapes: Two tape measures included, 1/32 inch increments on the deluxe set
  • Method: Lean the plates against the wheels, measure front width then rear width
  • Use: Check and set wheel toe-in
  • Maker note: Affected by wheel or tyre runout; set caster and camber first
  • Track use: Trackside favourite with teams from ChampCar to Grand-Am
  • Material: Aluminium plates
  • Limit: Measures toe only — no camber or caster
  • Buying channel: Verified Amazon listing, ASIN B000VAOHB2

Longacre Toe Plates: fits and best for

Best for a fast toe check after a tie-rod change, a tyre swap or a track session, and for a mechanic who already owns a camber gauge.

Longacre Toe Plates pros and watch-outs

  • The fastest toe check in this guide
  • Magnets hold the tape measure in place
  • Two tape measures included
  • A trackside favourite across racing series
  • Toe only — no camber or caster
  • Measures from the tyre, so runout and pressure matter
  • Needs the camber set first, per the maker
  • No laser or digital readout

Longacre Toe Plates: what owners report

A kit-car owner on the DF Kit Car forum reports using the plates with magnets and tape measures and targeting one eighth of an inch of rear toe.

A Mustang owner reports the Longacre caster and camber gauge is always spot on, uses the toe plates to verify toe after camber changes, and stresses setting the camber first, then the toe. Mustang7G owner thread.

Longacre Toe Plates: who should not buy

Skip them if you need camber or caster — these measure toe only. Skip them if your tyres are worn or at different pressures, since the plates read from the tyre. And skip them if you want a laser reading, because these plates use tapes, not a beam.

Longacre Toe Plates: pair it with

Pair them with the SPC FasTrax gauge below, so camber is set before the toe is checked.

We may earn a commission at no cost to you.

Set the camber first, then the toe — a camber change moves the toe. Our garage floor mats guide covers the same order-of-work habit for brake jobs. AGM Batteries vs Lead-Acid

Best Camber and Caster Gauge: SPC Performance FasTrax Camber/Caster Gauge 91000

Best Camber and Caster Gauge

Why the SPC FasTrax 91000 is our pick

The SPC Performance FasTrax Camber/Caster Gauge 91000 is the dedicated gauge for the two angles toe plates cannot measure: it displays camber angles over four degrees, positive or negative, and caster angles from four degrees negative to twelve degrees positive, for wheels from thirteen to eighteen inches in diameter. Specialty Products Company covers it for one year against defects in material and workmanship. For suspension work that changes camber and caster, this is the gauge.

SPC FasTrax 91000 key specs

  • Model: 91000 FasTrax Camber/Caster Gauge
  • Camber range: Over 4 degrees, positive or negative
  • Caster range: 4 degrees negative to 12 degrees positive
  • Wheel size: 13 to 18 inches per the maker sheet
  • Weight: 2.9 pounds
  • UPC: 082642910008
  • Manufacturer: Specialty Products Company, Longmont, Colorado
  • Warranty: 1 year against defects in material and workmanship
  • Add-ons: 91100 FasTrax Toe Kit adds toe readings; 91030 No Lip Adapter available
  • Sibling: 17 to 22 inch sibling is model 91010
  • Buying channel: Verified Amazon listing, ASIN B000PG6OW2

SPC FasTrax 91000: fits and best for

Best for setting camber and caster after suspension work, for a mechanic who already owns toe plates.

SPC FasTrax 91000 pros and watch-outs

  • Reads camber past 4 degrees and caster to plus 12
  • A dedicated gauge — no setup beyond the wheel
  • One-year warranty from Specialty Products Company
  • Add-on toe kit available if you want toe from the same gauge
  • No toe reading without the add-on kit
  • Wheel size is stated two ways in listings
  • Needs a level floor and a zero set before measuring
  • Heavier than a tape-based tool at 2.9 pounds

SPC FasTrax 91000: what owners report

Project coverage of the FasTrax 91000 shows it in use on a classic Mustang suspension job, with the gauge listed among the parts used. OnAllCylinders lists the FasTrax among the parts used.

A project team on OnAllCylinders used it to set camber at minus 2.25 degrees, then used a 30-degree sweep to read plus 4.5 degrees of caster. OnAllCylinders project shows the FasTrax readings.

SPC FasTrax 91000: who should not buy

Skip it if you need toe as well — buy the add-on toe kit, or the Tenhulzen or QuickTrick kit instead. Skip it if your wheels are larger than 18 inches, since the 91010 sibling covers 17 to 22 inches. And skip it if you will not zero the gauge first.

SPC FasTrax 91000: pair it with

Pair it with the Longacre toe plates above, to check toe after camber is set.

We may earn a commission at no cost to you.

Confirm the wheel size before ordering — the maker sheet says 13 to 18 inches and some listings say 13 to 17. Our replacement mirrors guide covers the same confirm-the-size habit. 12V Car Heaters Reviews Best Models

Spec comparison

SpecTenhulzen 2-WheelQuickTrick 4th GenLongacre Toe PlatesSPC FasTrax 91000
MeasuresCamber, caster, toeCaster, camber, toeToe onlyCamber, caster
Wheel sizeMost car wheels13 to 18 inchesMost car wheels13 to 18 inches
AccuracyWithin 0.1 degreesPer makerTape measure0.1 degree gauge
MethodPlates and readoutGauge and tapePlates and tapesGauge on the wheel
Turn platesBuilt inSold separately on ProNot neededNot needed
Made inUSAUSAPer listingUSA per maker
Part number3300416405MCAMZ52-7950191000
UseFull home alignmentPortable complete kitFast toe checkCamber and caster setup
MakerTenhulzen AutomotiveQuickTrickLongacreSPC Performance
WarrantyNot publishedLifetime parts per makerNot published1 year per maker
ListingWritten alternativeVerifiedVerifiedVerified
Check PriceThe Creators API could not verify a live Amazon listing for the Tenhulzen Automotive 2-Wheel Alignment Tool at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the QuickTrick Portable Wheel Alignment Kit 4th Gen. Check PriceCheck PriceCheck PriceCheck Price

How to do a DIY alignment at home

Start with the floor, not the tool. Park on a flat, level surface, set the tyres to road pressure, centre the steering wheel and settle the suspension by rolling the car forward and back. Every tool here assumes a level floor, and a sloped driveway makes every reading wrong, however good the tool is. Best Garage Floor Mats Under 30

Work in the maker’s order: set the camber first, then the caster, then the toe, because a camber change moves the toe. Take each reading twice, and if the two readings disagree, find out why before adjusting anything: a loose attachment, a tyre touching the plate, or a wheel that is not centred will all lie to you. Proving a measurement before trusting it is the habit that keeps a home alignment honest. Best Automotive Multimeters Under 100

After every adjustment, re-check the reading and road test the car on a straight, quiet road: hands light on the wheel, note whether it pulls, and check the wheel is straight. If the car still pulls or the wheel is crooked, the rear axle may need setting, which is a shop job. Keep the tool clean and dry between uses, and check the tyres again before the test drive. Best 12V Air Compressors Under 100

Safety essentials

  • Never work under a car supported only by a jack, use jack stands on solid ground, with the wheels chocked.
  • Keep hands clear of the wheels and steering while the car is rolling during a measurement.
  • Check the tyres are at road pressure before measuring, a soft tyre changes every reading.
  • Do not adjust suspension parts you do not understand, a wrong setting makes the car unsafe.
  • Keep the car in gear with the parking brake on while you measure, so it cannot roll.
  • Road test on a quiet road, and stop at once if the steering feels wrong after an adjustment.

An alignment tool measures angles on a car that can roll and steer, so these rules come first. The measurement itself is simple; the danger is a car that moves while you work under it.

Troubleshooting

Most alignment faults trace to the floor, the setup or the order of work, and the fix is usually a check rather than a replacement. Best Car Buffer for Scratches

SymptomLikely causeFix
Readings differ between the two sidesA wheel is not centred, a tyre is touching the plate, or the floor is not levelRe-centre the wheel, clear the plate, and check the floor
Toe will not come into specA bent tie rod, worn bushes, or the camber was set after the toeSet camber first, then toe; inspect the tie rods and bushes
The steering wheel is crooked after alignmentA two-wheel system cannot set thrust angle on a solid rear axleCentre the wheel and re-check toe, or take the car to a shop
The camber gauge reads differently each timeThe gauge was not zeroed, or the floor is not levelZero the gauge on a level surface and re-measure
The camber gauge will not zeroThe floor is not level, or the gauge needs its zero setZero the gauge on a level surface before measuring
Tyres still wear on one edgeThe alignment is right but the tyres are worn, or the pressure is wrongCheck pressures, inspect the tyres, and re-measure after a tyre change

Who should NOT buy these

You need a four-wheel alignment. Every tool here measures one axle at a time, and none of them sets thrust angle. If the rear axle needs setting, or the car has been in a crash, that is a shop alignment on a rack, and a home tool will not do it. Best Car Buffer for Home Use

Your wheels are larger than the tool fits. The QuickTrick 4th Gen here fits 13 to 18 inch wheels, and the SPC FasTrax 91000 fits 13 to 18 inches per its maker sheet. If your wheels are larger, buy the larger size rather than forcing a tool that does not fit. 12V Adapters Reviews for Cars

You drive a lifted 4×4 with tall sidewalls. The Tenhulzen maker states that on lifted or 4×4 vehicles with larger than stock off-road tyres, the tyre sidewall may be too tall for the plates to work. Check the maker’s note for your truck before ordering. 12V Adapters Reviews Best

You will not check the floor. Every tool here assumes a flat, level surface, and a sloped driveway makes every reading wrong. If you will not check the floor with a level, pay a shop for the alignment. 12V Adapters for Beginners Guide

You want a camera-based 3D aligner. None of these picks is a camera-based 3D aligner, and the gauges here read angles on a display. If you want a 3D machine with a printout, that is a shop purchase, not a home tool. 12V Adapters Review Amazon

Final verdict

Best Overall: Tenhulzen 2-Wheel The Creators API could not verify a live Amazon listing for the Tenhulzen Automotive 2-Wheel Alignment Tool at the time of writing, so there is no verified affiliate link for it in this guide. The button below goes to the closest verified Amazon option in this guide, the QuickTrick Portable Wheel Alignment Kit 4th Gen. Check Price — the best all-round kit here — all three angles in one setup, sold through the maker:

Best Complete Kit: QuickTrick 4th Gen Check Price — the best complete kit on Amazon — all three angles, portable, made in the USA:

Best Toe Plates: Longacre Toe Plates Check Price — the fastest toe check — plates with magnets and two tapes:

Best Camber and Caster Gauge: SPC FasTrax 91000 Check Price — the best camber and caster gauge — camber past 4 degrees, caster to plus 12:

FAQ

What is the best alignment tool for cars?

The Tenhulzen Automotive 2-Wheel Alignment Tool, on the evidence: camber, caster and toe in one setup, accurate to within 0.1 degrees, with turn plates built in. It is sold through the maker, so the guide gives a verified substitute button for the QuickTrick 4th Gen below it on every surface.

Can I align my car at home with these tools?

Yes, for one axle at a time, on a flat and level floor, with the tyres at road pressure. Set the camber first, then the caster, then the toe, and road test afterwards. A two-wheel tool cannot do a four-wheel alignment, so that is a shop job.

What is the difference between toe, camber and caster?

Toe is whether the wheels point in or out, camber is the tilt of the wheel from vertical, and caster is the angle of the steering axis that keeps the car tracking straight. The Tenhulzen and QuickTrick picks measure all three; the Longacre plates measure toe only, and the SPC FasTrax measures camber and caster.

What wheel size do these tools fit?

The QuickTrick 4th Gen here fits 13 to 18 inch wheels, and the SPC FasTrax 91000 fits 13 to 18 inches per its maker sheet. The Tenhulzen kit fits most car wheels, but check the maker note first if your car is lifted or has tall sidewalls. Measure your wheels before ordering, because the size is stamped on the tyre sidewall.

Do I need turn plates for a home alignment?

Not with the Tenhulzen kit, because its maker states expensive turn plates are not needed for the caster measurement, as the turn-plate function is built in. The QuickTrick 4th Gen Pro lists turn plates as sold separately, so check the kit contents before ordering.

Why is the Tenhulzen tool a written alternative?

Because no verified Amazon ASIN was found for it in Amazon listing data in search results. It is sold through the maker’s own store and through retailer mirrors, so the guide names the maker store and gives a verified substitute button for the QuickTrick 4th Gen below it.

Can toe plates alone align a car?

They can set toe, which is the adjustment most home jobs need after a tie-rod or tyre change. They cannot set camber or caster, and they measure from the tyre rather than the rim, so the tyre must be in good shape and at the same pressure on both sides.

How accurate are home alignment tools?

The Tenhulzen maker states camber accurate to within 0.1 degrees, and the QuickTrick digital gauge is certified and tested by every known authority, per the maker. Those figures assume a level floor, a centred wheel and a correct setup, because on a sloped driveway, no tool is accurate.

What does an alignment gauge show?

A gauge shows camber and caster as numbers on a display, accurate to within 0.1 degrees on the Tenhulzen kit, so there is no needle to read at an angle and no tape to misread. The QuickTrick gauge is certified and tested by every known authority, per the maker. A readout still needs a level floor and a centred wheel to be true.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

Tenhulzen Automotive 2-Wheel Alignment Tool

Leave a Comment