Best Alignment Equipment: 5 Picks Compared

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Your car pulls to the left, the steering wheel sits crooked, and the front tyres are wearing on the inside edge. A shop alignment costs money every time, and the car needs it again after every suspension job, every kerb hit and every new set of tyres.

Alignment equipment lets you check and set the angles yourself: toe with a pair of plates, camber and caster with a gauge, and the steering sweep with a pair of turn plates. The wrong tool measures the wrong angle, and the right tool pays for itself in two alignments.

This guide covers the alignment equipment that matters for a home garage and a small shop: toe plates, a caster and camber gauge, turn plates and a complete DIY kit. Five verified picks below, each checked against the listing for what it measures and what it fits.

The 30-second answer

Buy the Longacre 52-79505 Deluxe Toe Plates Pair Check Price for the strongest all-round alignment tool in this guide, a pair of deluxe toe plates from Longacre. Buy the Longacre 78264 Caster/Camber Gauge Check Price for a caster and camber gauge that reads both angles. Buy the VEVOR Wheel Alignment Tool 2-Pack Toe Plates Stainless Steel Check Price for a value set of stainless toe plates with tapes and a conversion chart. Buy the AutoSolo Wheel Alignment Turn Plates 4-Ton Capacity Brass Dial Check Price for a pair of turn plates with a brass dial for caster sweeps. Buy the AutoSolo DIY Car Alignment Kit with Camber Caster Tool Turn Plates and Wheel Clamp Check Price for a complete DIY alignment kit with a camber caster tool, turn plates and a wheel clamp.

How we researched this guide

We profiled five alignment tools, checked Amazon listing data for each one through the Creators API, and reviewed maker pages and owner reports in retailer reviews about measurement accuracy, ease of use, build quality and vehicle fitment. Where a tool carries a capacity or a rim size range, we recorded exactly what the listing states rather than assuming it fits every car.

Our quick picks

Best Overall

Longacre 52-79505 Deluxe Toe Plates Pair

Best for the strongest all-round alignment tool in this guide: a pair of deluxe toe plates from Longacre.

Best Camber Gauge

Longacre 78264 Caster/Camber Gauge

Best for a caster and camber gauge that reads both angles with bubble vials.

Best Value Toe Plates

VEVOR Wheel Alignment Tool 2-Pack Toe Plates Stainless Steel

Best for a value set of stainless toe plates with tapes and a conversion chart included.

Best Turn Plates

AutoSolo Wheel Alignment Turn Plates 4-Ton Capacity Brass Dial

Best for a pair of turn plates with a brass dial for caster sweeps and steering checks.

Best DIY Kit

AutoSolo DIY Car Alignment Kit with Camber Caster Tool Turn Plates and Wheel Clamp

Best for a complete DIY alignment kit with a camber caster tool, turn plates and a wheel clamp.

Quick comparison

Product Measures Use Warranty Check Price
Longacre 52-79505 Deluxe Toe Plates Pair Toe Setting front toe Not published Check Price
Longacre 78264 Caster/Camber Gauge Caster and camber Checking camber and caster Not published Check Price
VEVOR Wheel Alignment Tool 2-Pack Toe Plates Stainless Steel Toe Setting front toe Not published Check Price
AutoSolo Wheel Alignment Turn Plates 4-Ton Capacity Brass Dial Turn plates Caster sweeps Not published Check Price
AutoSolo DIY Car Alignment Kit with Camber Caster Tool Turn Plates and Wheel Clamp Complete kit Full home alignment Not published Check Price

How to choose alignment equipment

Which angle is wrong

Which angle is wrong decides the tool. Toe is the angle that wears tyres fastest and is measured with toe plates, camber is the lean of the wheel and is measured with a camber gauge, and caster is the steering angle and is measured with a gauge and turn plates. Find the symptom first: inside wear points to camber, a pull points to caster or toe, and a crooked wheel points to toe. Best Mud Flaps

Level floor first

A level floor is the first requirement for any alignment tool, because every measurement assumes the car is level. A sloped floor makes the toe reading wrong, the camber reading wrong and the caster reading wrong, however good the tools are. Check the floor with a long level before you start, and shim the wheels level if the floor is not flat. No tool can fix a bad floor. Best Performance Monitors Under 100

Toe plates or a full kit

Toe plates or a full kit is the choice between one job and every job. Toe plates measure toe only, which is the angle that matters most and the one that changes after every suspension job. A full kit adds a camber gauge, turn plates and a clamp, which covers camber and caster as well. If you only set toe, buy plates. If you want a complete home alignment, buy the kit. Best Storage Bins

Turn plates for caster

Turn plates are needed for caster, because caster is measured by turning the wheels and reading the change in camber. Turning the wheels on the ground binds the suspension and gives a wrong reading, while turn plates let the wheels turn freely with the suspension loaded. If you measure caster, you need turn plates. If you only measure toe and camber, you do not. Best Tool Storage

Bubble gauge or digital

Bubble gauge or digital is the choice between simple and precise. A bubble gauge like the Longacre 78264 reads camber to a quarter degree and needs no batteries, while a digital gauge reads to a tenth of a degree and is easier to read in poor light. For a home garage, a bubble gauge is accurate enough and never runs flat. For a race setup, a digital gauge is worth the extra cost. Best Tow Ropes Under 100

Specifications for your car

Specifications for your car are the numbers you set the angles to, and they come from the maker, not from the tool. The tool measures the angle, but the handbook or the alignment specification gives the target. Find the toe, camber and caster specification for your exact year, make and model before you start, because setting an angle to the wrong number is worse than not setting it at all. Battery Tender Junior vs NOCO Genius1

Alignment equipment by budget

Tier What you get Example pick
Entry A value set of stainless toe plates with tapes and a conversion chart included. VEVOR Wheel Alignment Tool 2-Pack Toe Plates Stainless Steel
Mid A pair of deluxe Longacre toe plates, or a caster and camber gauge from the same maker. Longacre 52-79505 Deluxe Toe Plates Pair
Top A complete DIY alignment kit with a camber caster tool, turn plates and a wheel clamp. AutoSolo DIY Car Alignment Kit with Camber Caster Tool Turn Plates and Wheel Clamp

Types of alignment equipment compared

Type How it works Best for Watch out for
Toe plates Two plates that sit against the tyres and measure toe with tapes. Setting front toe Measures toe only
Caster and camber gauge A gauge that attaches to the spindle and reads camber and caster. Checking camber and caster Needs a level floor
Turn plates Plates that let the wheels turn freely with the suspension loaded. Caster sweeps Measures nothing alone
DIY alignment kit A complete kit with a gauge, turn plates and a wheel clamp. Full home alignment Takes practice to use

Detailed reviews

Each tool below covers a different buyer: deluxe toe plates for setting toe, a caster and camber gauge for the other angles, value toe plates with everything included, turn plates for caster sweeps, and a complete DIY kit. Work on a level floor, because no tool can fix a bad floor.

Best Overall: Longacre 52-79505 Deluxe Toe Plates Pair

Best Overall

Why the Longacre Deluxe Toe Plates is our pick

The Longacre 52-79505 Deluxe Toe Plates are the overall pick because toe is the angle that matters most, and these plates measure it simply and accurately. The plates sit flat against the tyres, and two tape measures across the front and rear of the plates give the toe reading directly, without electronics, batteries or calibration. Longacre is the name that race shops trust for alignment tools, and the deluxe plates are the pair that home mechanics and small shops reach for first. For a buyer who wants to set toe correctly and check it after every suspension job, this is the tool to start with.

Longacre Deluxe Toe Plates key specs

  • Maker: Longacre
  • Model: 52-79505
  • Type: Deluxe toe plates, pair
  • Material: Thick formed aluminium per listing
  • Use: Measuring front toe
  • Method: Tape measures across the plates
  • Fitment: Check your tyre size first
  • Warranty: Not published
  • Listing: Verified

Longacre Deluxe Toe Plates: fits and best for

These plates fit a home mechanic or a small shop owner who sets toe after suspension work, tyre changes or kerb hits. They suit a buyer who wants a simple, accurate tool with no electronics, and who values a race-proven name.

Longacre Deluxe Toe Plates pros and watch-outs

  • Simple and accurate toe measurement
  • No electronics or batteries
  • Race-proven Longacre name
  • Pair covers both front wheels
  • Quick to set up and use
  • Measures toe only, not camber
  • Needs a level floor
  • Tapes sold separately on some listings

Longacre Deluxe Toe Plates: what owners report

Owner reports in retailer reviews commonly praise the accuracy and the solid build, and note that the plates give repeatable readings when used on a level floor.

Owners also report that the plates are easy to use for a home mechanic, and that they pay for themselves after a couple of alignments.

Longacre Deluxe Toe Plates: who should not buy

Do not buy these plates if you need to measure camber or caster, because toe plates measure toe only. Pair them with a camber gauge, like the Longacre 78264 in this guide, for a complete alignment check.

Longacre Deluxe Toe Plates: pair it with

Pair it with a camber gauge and a level floor, because toe, camber and a level surface are the three things a home alignment needs.

We may earn a commission at no cost to you.

Use the plates on a level floor: a sloped floor makes the toe reading wrong, however good the plates are. Warning Lights Reviews

Best Camber Gauge: Longacre 78264 Caster/Camber Gauge

Best Camber Gauge

Why the Longacre 78264 Gauge is our pick

The Longacre 78264 Caster/Camber Gauge is the gauge pick because it reads the two angles that toe plates cannot: camber and caster. The gauge attaches to the spindle with a magnetic adapter or a thread-on adapter, and three bubble vials read camber and caster directly, with each line on the camber vial representing a quarter degree. For a buyer who has set toe with plates and now needs to check the angles that wear tyres and pull the steering, this is the gauge that completes the job.

Longacre 78264 Gauge key specs

  • Maker: Longacre
  • Model: 78264
  • Type: Caster and camber gauge
  • Method: Bubble vials, 3 vials per maker
  • Camber reading: Quarter degree per line
  • Adapter: Magnetic and thread-on per maker
  • Use: Measuring caster and camber
  • Fitment: Check your spindle type first
  • Warranty: Not published
  • Listing: Verified

Longacre 78264 Gauge: fits and best for

This gauge fits a home mechanic or a racer who sets camber and caster after suspension work. It suits a buyer who already has toe plates and needs the gauge that reads the other two angles, and who values a simple, accurate bubble gauge.

Longacre 78264 Gauge pros and watch-outs

  • Reads caster and camber
  • Simple bubble vial design
  • Magnetic and thread-on adapters
  • Quarter degree camber readings
  • Race-proven Longacre name
  • Needs a level floor
  • Bubble gauges need care in the sun
  • Check spindle adapter fit first

Longacre 78264 Gauge: what owners report

Owner reports in retailer reviews commonly praise the accuracy and the clear vials, and note that the gauge gives repeatable readings when used carefully on a level floor.

Owners also report that the magnetic adapter holds firmly, and that the gauge is easy to use once the procedure is learned.

Longacre 78264 Gauge: who should not buy

Do not buy this gauge if you only need to set toe, because a camber gauge measures angles that toe plates do not, and it is wasted on a toe-only job. Buy toe plates first, then add the gauge.

Longacre 78264 Gauge: pair it with

Pair it with a pair of turn plates, because caster is measured by turning the wheels, and turn plates let the wheels turn freely without binding the suspension.

We may earn a commission at no cost to you.

Keep the gauge out of hot sun and store it below 120 degrees Fahrenheit, because heat can break the vials. Best First Aid Kit Under 50

Best Value Toe Plates: VEVOR Wheel Alignment Tool 2-Pack Toe Plates Stainless Steel

Best Value Toe Plates

Why the VEVOR Toe Plates is our pick

The VEVOR Wheel Alignment Tool 2-Pack Toe Plates are the value pick because they give a complete toe measuring kit in one box: two stainless steel toe plates, four alignment rods, magnetic slots, two measuring tapes and a conversion chart. The stainless plates resist rust, the magnetic slots hold the plates to the hub, and the conversion chart turns the tape reading into a toe angle without maths. For a buyer who wants to start measuring toe without buying the tapes and the chart separately, this is the kit that has everything in the box.

VEVOR Toe Plates key specs

  • Maker: VEVOR
  • Model: Wheel Alignment Tool, WBS-010
  • Type: Toe plates, 2-pack
  • Material: Stainless steel per listing
  • Includes: 4 alignment rods, magnetic slots
  • Includes: Measuring tapes and conversion chart
  • Use: Measuring toe angle
  • Fitment: Check your hub size first
  • Warranty: Not published
  • Listing: Verified

VEVOR Toe Plates: fits and best for

These plates fit a home mechanic who wants a complete toe kit at a value cost. They suit a buyer who is setting toe for the first time and wants the tapes and the conversion chart in the box, and a Jeep or truck owner, because the listing notes the tool is made for suspension trucks and Jeep SUVs.

VEVOR Toe Plates pros and watch-outs

  • Complete kit in one box
  • Stainless steel, rust resistant
  • Magnetic slots hold the plates
  • Tapes and conversion chart included
  • Value cost for a full kit
  • Check hub fit before ordering
  • Made for trucks and Jeeps per maker
  • Needs a level floor

VEVOR Toe Plates: what owners report

Owner reports in retailer reviews commonly note that the kit is complete and easy to use, and that the magnetic slots hold the plates well during measurement.

Owners also report that the conversion chart is handy, and that the stainless plates feel solid for the cost.

VEVOR Toe Plates: who should not buy

Do not buy these plates for a car the listing does not cover, because the maker notes the tool is made for suspension trucks and Jeep SUVs. Check the fitment for your vehicle before ordering.

VEVOR Toe Plates: pair it with

Pair it with a camber gauge for a complete alignment check, because toe plates measure toe only and the camber angle wears tyres just as fast.

We may earn a commission at no cost to you.

Check that the plates fit your hub before ordering: the magnetic slots need a hub they can hold to. ABS Scan Tools vs OBDII

Best Turn Plates: AutoSolo Wheel Alignment Turn Plates 4-Ton Capacity Brass Dial

Best Turn Plates

Why the AutoSolo Turn Plates is our pick

The AutoSolo Wheel Alignment Turn Plates are the turn plate pick because they do the job that no other tool in this guide does: they let the front wheels turn freely while the suspension stays loaded, so caster can be measured without binding. The listing gives a four-ton capacity for the pair, a brass dial that reads to 60 degrees each way from centre, and bonus accessories including two wheel chocks and two transition bridges. The plates measure 15.75 by 15.75 inches and weigh 37 pounds for the pair, so they are light enough to carry and heavy enough to stay put. For a buyer who measures caster, turn plates are not optional: they are the tool that makes the measurement possible.

AutoSolo Turn Plates key specs

  • Maker: AutoSolo
  • Type: Wheel alignment turn plates, pair
  • Capacity: 4-ton per listing
  • Dial: Brass, reads to 60 degrees each way
  • Size: 15.75 by 15.75 inches per listing
  • Weight: 37 lbs per pair per listing
  • Includes: 2 wheel chocks, 2 transition bridges
  • Use: Caster sweeps and steering checks
  • Fitment: Check your tyre size first
  • Warranty: Not published
  • Listing: Verified

AutoSolo Turn Plates: fits and best for

These plates fit a home mechanic or a small shop owner who measures caster and needs the wheels to turn freely. They suit a buyer who already has a camber gauge and toe plates, and who wants the turn plates that complete the alignment setup.

AutoSolo Turn Plates pros and watch-outs

  • Four-ton capacity per listing
  • Brass dial reads to 60 degrees
  • Chocks and bridges included
  • Light enough to carry
  • Lets wheels turn without binding
  • Measures nothing alone
  • Needs a level floor
  • Check tyre size before ordering

AutoSolo Turn Plates: what owners report

Owner reports in retailer reviews commonly praise the smooth rotation and the clear brass dial, and note that the plates make caster measurement far easier than turning the wheels on the ground.

Owners also report that the chocks and bridges are useful, and that the plates are well made for the cost.

AutoSolo Turn Plates: who should not buy

Do not buy turn plates alone if you have no gauge or toe plates, because turn plates measure nothing by themselves. They are a support tool for a camber gauge, and they need the rest of the kit to be useful.

AutoSolo Turn Plates: pair it with

Pair it with the Longacre caster and camber gauge in this guide, because the gauge reads the angles and the turn plates let the wheels turn to make the reading.

We may earn a commission at no cost to you.

Use the transition bridges to drive onto the plates: a car that drops onto a turn plate can shift it out of position. AGM Batteries Review for Cars

Best DIY Kit: AutoSolo DIY Car Alignment Kit with Camber Caster Tool Turn Plates and Wheel Clamp

Best DIY Kit

Why the AutoSolo DIY Alignment Kit is our pick

The AutoSolo DIY Car Alignment Kit is the kit pick because it is the only product in this guide that gives the whole alignment setup in one box: a camber and caster alignment tool, a set of turn plates, and a wheel clamp, for front end alignment at home. The listing fits 11 to 25 inch rims, so it covers most cars, trucks and SUVs, and the kit is made for a home mechanic who wants to check and set the angles without buying each tool separately. For a buyer who is starting from nothing and wants one purchase that covers the job, this is the kit.

AutoSolo DIY Alignment Kit key specs

  • Maker: AutoSolo
  • Model: ASWG0401KG
  • Type: DIY front end alignment kit
  • Includes: Camber caster tool, turn plates, wheel clamp
  • Rims: 11 to 25 inch per listing
  • Use: Home wheel alignment
  • Fitment: Check your rim size first
  • Warranty: Not published
  • Listing: Verified

AutoSolo DIY Alignment Kit: fits and best for

This kit fits a home mechanic who wants to do a complete alignment at home and does not own any alignment tools yet. It suits a buyer with a car, truck or SUV on 11 to 25 inch rims, and a garage with a level floor to work on.

AutoSolo DIY Alignment Kit pros and watch-outs

  • Complete kit in one box
  • Camber caster tool included
  • Turn plates included
  • Wheel clamp included
  • Fits 11 to 25 inch rims
  • Check rim size before ordering
  • Needs a level floor
  • Takes practice to use well

AutoSolo DIY Alignment Kit: what owners report

Owner reports in retailer reviews commonly note that the kit is complete and good value, and that it covers the angles a home alignment needs.

Owners also report that the instructions help a first-time user, and that the kit pays for itself after a couple of alignments.

AutoSolo DIY Alignment Kit: who should not buy

Do not buy this kit if you already own toe plates and a camber gauge, because you would pay twice for tools you have. Buy the missing pieces, like turn plates, instead of a whole kit.

AutoSolo DIY Alignment Kit: pair it with

Pair it with a level floor and a repair manual for your car, because the kit measures the angles and the manual gives the specification to set them to.

We may earn a commission at no cost to you.

Check your rim size before ordering: the kit fits 11 to 25 inch rims, and rims outside that range will not fit the clamp. AGM Batteries Cost

Spec comparison

Spec Longacre Deluxe Toe Plates Longacre 78264 Gauge VEVOR Toe Plates AutoSolo Turn Plates AutoSolo DIY Alignment Kit
Maker Longacre Longacre VEVOR AutoSolo AutoSolo
Model 52-79505 78264 WBS-010 Turn plates ASWG0401KG
Measures Toe Caster and camber Toe Turn plates Camber, caster, toe
Method Tape measures Bubble vials Tapes and chart Brass dial Gauge and clamp
Capacity Not published Not published Not published 4-ton Not published
Rims Not published Not published Trucks and Jeeps Not published 11 to 25 inch
Includes Plates Gauge Rods, tapes, chart Chocks, bridges Gauge, plates, clamp
Electronics None None None None None
Best for Setting toe Camber and caster Value toe kit Caster sweeps Full home alignment
Level Home and shop Home and race Home Home and shop Home
Check Price Check Price Check Price Check Price Check Price Check Price

Using your alignment equipment

Set the car on a level floor, centre the steering wheel, and bounce the suspension to settle it before you measure. Fit the toe plates flat against the tyres, measure across the front and rear of the plates, and note the toe reading before you adjust anything. AGM Batteries vs Flooded

Fit the camber gauge to the spindle, read the camber on the vial, then set the wheels on the turn plates and turn them to read caster. Adjust one angle at a time, re-check after each adjustment, and take the car for a slow test drive before you drive normally. AGM Batteries vs Lead-Acid

Write down every reading before you adjust anything, so you can return to the starting point if an adjustment makes things worse. Recheck the readings after a short drive, because the suspension settles once the car has moved. Keep the plates and the gauge clean and stored flat, and check the gauge against a known level surface now and then.

Safety essentials

  • Never work under a car supported only by a jack: use jack stands.
  • Chock the wheels and set the parking brake before measuring.
  • Do not drive a car with a badly wrong alignment: have it checked first.
  • Keep the gauge out of hot sun and store it below 120 degrees Fahrenheit.
  • Check the tyre pressures before measuring: low pressure changes the readings.
  • Test the car at low speed after any alignment adjustment.

Three accessories worth adding to the garage: a compact charger for roadside phone use, a spare charger for the glove box, and a rated snatch block for recovery work. Each carries its own verified button below.

Anker 320 24W Dual-USB Mini Car Charger, a compact charger for keeping a phone alive on a long drive or at a roadside stop.

LISEN 48W USB C Car Charger Adapter, 2-pack, so a second charger stays in the glove box as a spare.

WARN Epic Snatch Block, a 6-ton rated block for recovery work when a straight pull is not possible.

Troubleshooting

Most problems in this guide trace to one of the causes below, and the fix is usually a check rather than a replacement. 12V Car Heaters Reviews Best Models

Symptom Likely cause Fix
Toe reading changes every time Unlevel floor or loose plates Level the floor and seat the plates flat
Camber reading is wrong Gauge not level or spindle dirty Clean the spindle and level the gauge
Caster reading will not repeat Wheels binding on the ground Use turn plates so the wheels turn freely
Car still pulls after alignment Worn parts or wrong specification Check the suspension parts and the specification
Tyres wear on the inside edge Too much negative camber Check the camber and the specification for your car
Steering wheel sits crooked Toe set with the wheel off centre Centre the wheel before setting toe

Who should NOT buy these

Do not buy alignment tools without a level floor. Every measurement assumes the car is level, and a sloped floor makes every reading wrong. Check the floor with a long level before you buy the tools, because no tool can fix a bad floor. 12V Car Heaters vs AC

Do not buy turn plates alone. Turn plates measure nothing by themselves: they are a support tool for a camber gauge. If you have no gauge and no toe plates, buy the complete kit or the plates first, and add turn plates when you measure caster. 12V Car Heaters vs Electric Heaters

Do not set angles to the wrong specification. The tool measures the angle, but the handbook gives the target for your exact car. Setting toe, camber or caster to the wrong number is worse than not setting it at all. 12V Heater Review

Do not ignore worn suspension parts. An alignment cannot fix a worn ball joint, a bent tie rod or a sagging spring. Check the parts first, replace what is worn, and then align the car. Best Car Buffer for Scratches

Final verdict

Best Overall: Longacre Deluxe Toe Plates Check Price — the strongest all-round alignment tool in this guide for setting toe.

Best Camber Gauge: Longacre 78264 Gauge Check Price — a caster and camber gauge that reads both angles with bubble vials.

Best Value Toe Plates: VEVOR Toe Plates Check Price — a value set of stainless toe plates with tapes and a conversion chart included.

Best Turn Plates: AutoSolo Turn Plates Check Price — a pair of turn plates with a brass dial for caster sweeps and steering checks.

Best DIY Kit: AutoSolo DIY Alignment Kit Check Price — a complete DIY alignment kit with a camber caster tool, turn plates and a wheel clamp.

FAQ

What is the best alignment equipment for home use?

For most home mechanics, a pair of toe plates and a caster and camber gauge cover the angles that matter, with turn plates added for caster. The Longacre toe plates and gauge in this guide are the proven choice, while the AutoSolo DIY kit gives the whole setup in one box for a buyer starting from nothing.

Can I do a wheel alignment at home?

Yes, for toe, camber and caster, if you have a level floor, the right tools and the specification for your car. A home alignment takes patience and practice, and it is not a substitute for a shop alignment if the suspension is worn or bent. Start with toe, which is the angle that matters most.

What do toe plates measure?

Toe plates measure the toe angle: whether the front of the tyres points in or out. The plates sit flat against the tyres, and two tape measures across the front and rear of the plates give the reading. Toe is the angle that wears tyres fastest and the one that changes after every suspension job.

What is the difference between camber and caster?

Camber is the lean of the wheel when viewed from the front: top in or top out. Caster is the angle of the steering axis when viewed from the side, and it affects steering feel and return. Camber wears tyres, while caster affects how the car steers and how the wheel returns to centre.

Do I need turn plates to measure caster?

Yes. Caster is measured by turning the wheels and reading the change in camber, and turning the wheels on the ground binds the suspension and gives a wrong reading. Turn plates let the wheels turn freely with the suspension loaded, so the caster reading is true.

Why does my car pull to one side?

A pull can come from toe, camber or caster being wrong, from a worn suspension part, or from a tyre problem. Check the alignment angles first, then check the tyres for uneven wear and the suspension for worn parts. A pull that does not change with the alignment is usually a part, not an angle.

How often should I check my alignment?

Check it after every suspension job, after hitting a kerb or a pothole hard, after fitting new tyres, and whenever the car pulls or the tyres wear unevenly. A home check with toe plates takes minutes, and catching a wrong angle early saves a set of tyres.

Are bubble camber gauges accurate?

Yes, for home and race use. A bubble gauge like the Longacre 78264 reads camber to a quarter degree, which is accurate enough for most cars. A digital gauge reads to a tenth of a degree and is easier to read in poor light, but for a home garage a bubble gauge is accurate and never runs flat.

What size rims does the AutoSolo DIY kit fit?

The listing fits 11 to 25 inch rims, which covers most cars, trucks and SUVs. Check your rim size before ordering, because rims outside that range will not fit the wheel clamp, and the kit cannot measure a wheel it cannot clamp to.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

Longacre 52-79505 Deluxe Toe Plates Pair

Leave a Comment