Best Adjustable Hitch Mounts Alternative to Winch: 5 Picks That Tow

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

You own three ball mounts, and none of them is the right height for the trailer you are hooking up today. One is too low, one is too high, and the right one is in the garage at home.

A winch pulls a stuck vehicle free, but it cannot tow a trailer down the road, and that is where the alternative comes in. When the job is towing rather than recovery, the alternative to a winch is an adjustable hitch mount: one mount, several heights, and two ball sizes on the same head.

This guide compares five adjustable hitch mounts as alternatives to a winch for towing, by receiver size, drop and towing weight, so one mount can cover every trailer you own. A hitch mount never replaces a winch for recovery, and this guide never claims it does.

The 30-second answer

Buy the B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 5 inch Drop, 10,000 GTW – TS10037B Check Price for most 2 inch receivers. Buy the Weigh Safe 180-Degree Trailer Hitch – Adjustable Trailer Hitch for Towing – Compatible with 2.5 inch Receivers – 8 inch Drop, Chrome-Plated Tow Balls, 18,500 GTW – CTB8-2.5 Check Price for a flip-ball mount with a lock. Buy the CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs Check Price for the lowest cost steel mount. Buy the ANDERSEN HITCHES | 6 inch Drop/Rise | Adjustable Rapid Hitch with 2×2-5/16 inch Greaseless AlumiBall | 3405 Check Price for the lightest mount. Buy the B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2.5 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 7 inch Drop, 18,000 GTW – TS20040B Check Price for heavy towing on a 2.5 inch receiver.

How we researched this guide

We profiled five adjustable hitch mounts, checked Amazon listing data for each one through the Creators API, and reviewed maker pages, towing roundups and owner reports about receiver size, drop, towing weight and stow-away use. Where a listing does not publish a figure, we say so instead of guessing.

Our quick picks

Best Overall

B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 5 inch Drop, 10,000 GTW – TS10037B

Best for most 2 inch receivers: an adjustable dual-ball mount with a 5 inch drop, a 10,000-pound towing weight, and a head that stows under the truck.

Best Premium Flip

Weigh Safe 180-Degree Trailer Hitch – Adjustable Trailer Hitch for Towing – Compatible with 2.5 inch Receivers – 8 inch Drop, Chrome-Plated Tow Balls, 18,500 GTW – CTB8-2.5

Best for a flip-ball mount with a lock: an adjustable aluminum hitch with an 8 inch drop, chrome-plated balls and a dual-pin keyed lock.

Best Value Steel

CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs

Best for the lowest cost steel mount: an adjustable channel mount with a 6 inch drop, two ball sizes and a 14,000-pound towing weight.

Best Lightweight

ANDERSEN HITCHES | 6 inch Drop/Rise | Adjustable Rapid Hitch with 2×2-5/16 inch Greaseless AlumiBall | 3405

Best for the lightest mount: a polished aluminum hitch with a 6 inch drop and rise, a greaseless aluminum ball and a 10,000-pound towing weight.

Best Heavy Duty

B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2.5 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 7 inch Drop, 18,000 GTW – TS20040B

Best for heavy towing on a 2.5 inch receiver: an adjustable dual-ball mount with a 7 inch drop and an 18,000-pound towing weight.

Quick comparison

ProductDropUseWarrantyCheck Price
B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 5 inch Drop, 10,000 GTW – TS10037B5 in drop, 10,000 lbsMost 2 inch receiversNot publishedCheck Price
Weigh Safe 180-Degree Trailer Hitch – Adjustable Trailer Hitch for Towing – Compatible with 2.5 inch Receivers – 8 inch Drop, Chrome-Plated Tow Balls, 18,500 GTW – CTB8-2.58 in drop, 18,500 lbsHeavy-duty flip-ball towing1-year limitedCheck Price
CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs6 in drop, 14,000 lbsBudget adjustable towingNot publishedCheck Price
ANDERSEN HITCHES | 6 inch Drop/Rise | Adjustable Rapid Hitch with 2×2-5/16 inch Greaseless AlumiBall | 34056 in drop, 10,000 lbs GTWLightweight daily towingNot publishedCheck Price
B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2.5 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 7 inch Drop, 18,000 GTW – TS20040B7 in drop, 18,000 lbsHeavy-duty 2.5 inch towingNot publishedCheck Price

How to choose an adjustable hitch mount

Receiver size first

Receiver size is the first thing to check, because a mount that does not match your receiver is a return, not a bargain. Measure the inside of the receiver opening: 2 inches on most half-ton trucks and SUVs, 2.5 inches on most heavy-duty trucks. The B&W TS10037B, the CURT 45900 and the Andersen fit a 2 inch receiver, while the Weigh Safe 180 and the B&W TS20040B fit a 2.5 inch receiver. Best ATV Winch

Drop and rise for a level trailer

Drop and rise decide whether your trailer tows level, because a nose-high or nose-low trailer sways and wears its tires unevenly. Measure from the ground to the top of your receiver, and from the ground to the bottom of the trailer coupler when the trailer is level. The difference is the drop you need, and an adjustable mount covers it in 1 inch steps. Best Jump Starter

Towing weight and the lowest link

Towing weight is set by the lowest-rated link in the chain, because the mount, the receiver, the ball and the trailer all carry ratings. The mounts in this guide run from 10,000 to 18,500 pounds, so match the mount to your trailer weight and never exceed the lowest rating. Check the ball rating too, because the 2 inch ball is rated lower than the 2-5/16 inch ball on the same mount. Best Engine Oil

Ball sizes you actually tow

Ball sizes decide whether the mount covers your trailers, because a 2 inch coupler will not fit a 2-5/16 inch ball and the reverse is unsafe. Every mount in this guide carries both ball sizes, either as a dual ball or a flip ball, so one mount covers two couplers. If you tow only one coupler size, a single-ball mount may cost less, but the dual ball is the safer buy. Best Automotive Multimeters vs Watts

Steel, aluminum or stow-away

Material and design decide how the mount feels every day, because you carry it, fit it and remove it. Steel mounts like the CURT are cheap and strong but heavy and can rust. Aluminum mounts like the Andersen and the Weigh Safe are light and rust-free but cost more. A stow-away head like the B&W keeps the mount on the truck without bruising your shins. Best Automotive Borescope for Mechanics

Winch versus adjustable mount

A winch and an adjustable mount do different jobs, so the choice starts with the job, not the tool. A winch pulls a stuck vehicle free, while an adjustable mount tows a trailer down the road. If the job is towing, the mount is the alternative to a winch, and one mount covers several trailers. If the job is recovery, buy a winch, because no hitch mount pulls a stuck truck free. Best Adjustable Wrench

Adjustable hitch mounts by budget

TierWhat you getExample pick
Lowest cost steelAn adjustable channel mount with a 6 inch drop and two ball sizes for most 2 inch receivers.CURT 45900
Lightest daily mountA polished aluminum mount with a greaseless ball for drivers who swap hitches often.Andersen Rapid Hitch 3405
Best all-round mountA dual-ball mount with a stow head for most 2 inch receivers and several trailers.B&W Tow & Stow TS10037B
Heavy-duty premiumA flip-ball aluminum mount with an 8 inch drop for 2.5 inch receivers.Weigh Safe 180 CTB8-2.5

Types of adjustable hitch mounts compared

TypeHow it worksBest forWatch out for
Dual-ball stow mountA dual-ball head that rotates to stow under the truck when not towing.Drivers who want the mount to disappearHeavy to lift
Flip-ball mountA ball assembly that turns 180 degrees to change ball sizes without tools.Drivers who tow two coupler sizesCosts more than a channel mount
Channel mountA steel channel with pin holes that sets the height in fixed steps.Budget buyers who want adjustable heightNo stow position
Aluminum rapid mountA light aluminum mount with a greaseless ball and a single-pin height change.Drivers who swap hitches oftenLower towing weight than steel
Heavy-duty dual-ballA large dual-ball mount for 2.5 inch receivers and the heaviest trailers.Heavy-duty truck ownersFits a 2.5 inch receiver only

Detailed reviews

Each mount below is checked against its listing and the roundups. Measure your receiver size and your drop before you buy, because the wrong receiver size is a return.

Best Overall: B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 5 inch Drop, 10,000 GTW – TS10037B

Best Overall

Why the B&W Tow & Stow TS10037B is our pick

The B&W Tow & Stow TS10037B is the overall pick because it replaces the most fixed mounts at once. It fits a 2 inch receiver, carries a dual ball in 2 inch and 2-5/16 inch sizes, and adjusts to a 5 inch drop with a 5.5 inch rise, so it levels most trailers without a second mount. The gross trailer weight is 10,000 pounds. The head rotates to stow under the truck when you are not towing, which keeps it out of your shins. For a driver with one truck and several trailers, this is the mount to buy first.

B&W Tow & Stow TS10037B key specs

  • Type: Adjustable dual-ball mount
  • Receiver: 2 inch
  • Balls: 2 inch and 2-5/16 inch
  • Drop: 5 inch
  • Rise: 5.5 inch
  • Gross trailer weight: 10,000 lbs
  • Brand: B&W Trailer Hitches
  • Model: TS10037B
  • Stow: Rotates under the truck
  • Finish: Black
  • Use: Most 2 inch receivers
  • Warranty: Not published

B&W Tow & Stow TS10037B: fits and best for

The Tow & Stow TS10037B fits a driver with a 2 inch receiver who tows more than one trailer, because the dual ball and adjustable height cover two coupler sizes and several heights. It suits boats, utility trailers and campers that sit at different heights. Check your receiver size first: this mount fits a 2 inch receiver only, and the 2.5 inch version is a different listing.

B&W Tow & Stow TS10037B pros and watch-outs

  • Dual ball covers two coupler sizes
  • Adjusts to a 5 inch drop
  • Stows under the truck when not towing
  • 10,000-pound towing weight
  • From B&W, a brand towers know
  • Fits a 2 inch receiver only
  • Heavy to carry at around 30 pounds
  • Not for weight distribution systems
  • No published warranty figure

B&W Tow & Stow TS10037B: what owners report

Owner reports in retailer reviews commonly note the Tow & Stow swaps ball sizes in seconds, and the stow position is the feature owners mention most.

Owners also report the mount tows level across different trailers, though a few note the weight makes it a two-hand lift, so keep that in mind. Hitch and Sway notes the stowing head is the feature Tow & Stow owners like most.

B&W Tow & Stow TS10037B: who should not buy

Do not buy the TS10037B if your truck has a 2.5 inch receiver: this mount fits a 2 inch receiver only. A heavy-duty truck driver should look at the TS20040B instead.

B&W Tow & Stow TS10037B: pair it with

Pair it with a hitch lock, so the mount stays on the truck.

We may earn a commission at no cost to you.

Grease the balls lightly before the first tow. Best All-Season Tires Under 100

Best Premium Flip: Weigh Safe 180-Degree Trailer Hitch – Adjustable Trailer Hitch for Towing – Compatible with 2.5 inch Receivers – 8 inch Drop, Chrome-Plated Tow Balls, 18,500 GTW – CTB8-2.5

Best Premium Flip

Why the Weigh Safe 180 CTB8-2.5 is our pick

The Weigh Safe 180 CTB8-2.5 is the premium flip pick because its ball assembly turns 180 degrees, so you switch ball sizes without removing the mount or carrying a second head. It fits a 2.5 inch receiver, adjusts to an 8 inch drop, and carries a gross trailer weight of 18,500 pounds with chrome-plated tow balls in 2 inch and 2-5/16 inch sizes. The mount is aircraft-grade billet aluminum, and a dual-pin keyed lock holds the ball in place. For a heavy-duty truck driver who tows several trailers and wants the ball change to take seconds, this is the mount to buy.

Weigh Safe 180 CTB8-2.5 key specs

  • Type: Adjustable 180-degree flip hitch
  • Receiver: 2.5 inch
  • Balls: 2 inch and 2-5/16 inch, chrome-plated
  • Drop: 8 inch
  • Gross trailer weight: 18,500 lbs
  • Brand: Weigh Safe
  • Model: CTB8-2.5
  • Material: Aircraft-grade billet aluminum
  • Lock: Dual-pin keyed lock
  • Use: Heavy-duty towing
  • Warranty: 1-year limited
  • Finish: Chrome balls, aluminum body

Weigh Safe 180 CTB8-2.5: fits and best for

The Weigh Safe 180 fits a heavy-duty truck driver with a 2.5 inch receiver who tows trailers with different coupler sizes, because the flip ball changes size in seconds. It suits horse trailers, car haulers and heavy campers that sit at different heights. Check your receiver size first, because this mount fits a 2.5 inch receiver only.

Weigh Safe 180 CTB8-2.5 pros and watch-outs

  • Flip ball changes size in seconds
  • 18,500-pound towing weight
  • Aircraft-grade aluminum body
  • Dual-pin keyed lock included
  • 8 inch drop levels tall trucks
  • Fits a 2.5 inch receiver only
  • Costs more than a steel channel mount
  • Aluminum can mark if hit by steel gear
  • No built-in tongue weight gauge

Weigh Safe 180 CTB8-2.5: what owners report

Owner reports in retailer reviews commonly note the 180 hitch flips between ball sizes without tools, and the quick change is the feature owners mention most when they tow two trailers in a day.

Owners also report the aluminum body stays clean and rust-free, though a few note the mount is heavy for its size, so lift it with both hands. Oliver owners who fitted the Weigh Safe 180 call it solidly engineered with very little play.

Weigh Safe 180 CTB8-2.5: who should not buy

Do not buy the Weigh Safe 180 if your truck has a 2 inch receiver, because this mount fits a 2.5 inch receiver only. A half-ton truck driver should look at the B&W TS10037B instead.

Weigh Safe 180 CTB8-2.5: pair it with

Pair it with safety chains rated for your trailer weight.

We may earn a commission at no cost to you.

Lock the pins before every tow, and check them at fuel stops. Best All-Season Tires Under 200

Best Value Steel: CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs

Best Value Steel

Why the CURT 45900 is our pick

The CURT 45900 is the value pick because it is the cheapest way into an adjustable mount that still tows heavy. It fits a 2 inch receiver, adjusts to a 6 inch drop with a 5-1/4 inch rise, and carries two balls in 2 inch and 2-5/16 inch sizes. The 2-5/16 inch ball is rated to 14,000 pounds and the 2 inch ball to 10,000 pounds. The channel is high-strength steel with a black carbide powder coat. For a driver who wants adjustable height on a budget and does not need a flip ball or a stow position, this is the mount to buy.

CURT 45900 key specs

  • Type: Adjustable channel ball mount
  • Receiver: 2 inch
  • Balls: 2 inch and 2-5/16 inch
  • Drop: 6 inch
  • Rise: 5-1/4 inch
  • Gross trailer weight: 14,000 lbs
  • Brand: CURT
  • Model: 45900
  • Material: High-strength steel
  • Finish: Black carbide powder coat
  • Use: Most 2 inch receivers
  • Warranty: Not published

CURT 45900: fits and best for

The CURT 45900 fits a driver with a 2 inch receiver who wants adjustable height without paying for a flip ball or a stow head. It suits utility trailers, boat trailers and campers that sit at different heights. Check your receiver size first, because this mount fits a 2 inch receiver only, and the 2.5 inch version is the CURT 45902.

CURT 45900 pros and watch-outs

  • Lowest cost adjustable mount here
  • 14,000-pound towing weight
  • 6 inch drop with 5-1/4 inch rise
  • Two ball sizes included
  • Steel channel built for hard use
  • No stow position
  • No flip ball, balls swap by hand
  • Steel needs care to avoid rust
  • Heavier than an aluminum mount

CURT 45900: what owners report

Owner reports in retailer reviews commonly note the CURT 45900 tows level across different trailers, and the adjustable channel is the feature owners mention most when they stop buying fixed mounts.

Owners also report the steel build feels solid for the cost, though a few note the powder coat chips with hard use, so touch it up to stop rust. PPRO Reviews lists the CURT 45900 among its best ball mounts, with the 2-5/16 inch ball rated to 14,000 lbs and the 2 inch ball to 10,000 lbs.

CURT 45900: who should not buy

Do not buy the CURT 45900 if you want the mount to disappear under the truck when you are not towing, because this channel mount has no stow position. A driver who wants that should look at the B&W Tow & Stow instead.

CURT 45900: pair it with

Pair it with a hitch pin lock, so the mount stays put.

We may earn a commission at no cost to you.

Torque the ball nuts to the maker figure before the first tow. Best Garage Security Cameras Under 100

Best Lightweight: ANDERSEN HITCHES | 6 inch Drop/Rise | Adjustable Rapid Hitch with 2×2-5/16 inch Greaseless AlumiBall | 3405

Best Lightweight

Why the Andersen Rapid Hitch 3405 is our pick

The Andersen Rapid Hitch 3405 is the lightweight pick because its polished aluminum body weighs far less than a steel mount of the same rating. It adjusts to a 6 inch drop or rise in 1 inch steps, and the Greaseless AlumiBall means you never grease the ball or the coupler. The dual ball covers 2 inch and 2-5/16 inch couplers, with a towing weight of 8,000 pounds on the 2 inch ball and 10,000 pounds on the 2-5/16 inch ball, and a tongue weight of 1,500 pounds. For a driver who swaps hitches often, this is the mount to buy.

Andersen Rapid Hitch 3405 key specs

  • Type: Adjustable aluminum ball mount
  • Receiver: 2 inch
  • Balls: 2 inch and 2-5/16 inch AlumiBall
  • Drop and rise: 6 inch, in 1 inch steps
  • Gross trailer weight: 8,000 lbs (2 inch ball) / 10,000 lbs (2-5/16 inch ball)
  • Tongue weight: 1,500 lbs
  • Brand: Andersen Hitches
  • Model: 3405
  • Material: Polished aluminum
  • Ball: Greaseless AlumiBall
  • Use: Trucks and SUVs with 2 inch receivers
  • Warranty: Not published

Andersen Rapid Hitch 3405: fits and best for

The Andersen Rapid Hitch fits a driver who removes the hitch often: the aluminum body is light enough to carry with one hand. It suits SUVs and trucks with a 2 inch receiver, and drivers towing several trailers a week. Check your receiver size first: this mount fits a 2 inch receiver, and a sleeve is needed for larger receivers.

Andersen Rapid Hitch 3405 pros and watch-outs

  • Lightest full-size hitch here
  • Greaseless ball, no mess
  • 6 inch drop and rise in 1 inch steps
  • Polished aluminum never rusts
  • Quick single-pin height change
  • Lower towing weight than the B&W heavy mount
  • Aluminum can gouge if hit by steel gear
  • No stow position
  • No published warranty figure

Andersen Rapid Hitch 3405: what owners report

Owner reports in retailer reviews commonly note the Rapid Hitch is light enough to carry with one hand, and the greaseless ball is the feature owners mention most.

Owners also report the height change takes seconds with one pin, though a few note the nylon cap on the 2 inch ball can come loose. A Garage Journal owner says either ball size takes about 20 seconds to set at any height.

Andersen Rapid Hitch 3405: who should not buy

Do not buy the Andersen Rapid Hitch if you tow over 8,000 pounds on the 2 inch ball, or over 10,000 pounds on the 2-5/16 inch ball, because the heavy steel mounts are rated higher. A heavy hauler should look at the B&W TS20040B instead.

Andersen Rapid Hitch 3405: pair it with

Pair it with a receiver sleeve if your truck has a larger receiver.

We may earn a commission at no cost to you.

Check the ball cap before every tow. Best Garage Storage

Best Heavy Duty: B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2.5 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 7 inch Drop, 18,000 GTW – TS20040B

Best Heavy Duty

Why the B&W Tow & Stow TS20040B is our pick

The B&W Tow & Stow TS20040B is the heavy-duty pick because it pairs the stow-away head of the TS10037B with a 2.5 inch receiver and an 18,000-pound towing weight. It fits a 2.5 inch receiver, carries a dual ball in 2 inch and 2-5/16 inch sizes, and adjusts to a 7 inch drop with a 7.5 inch rise, so it levels tall trucks and low trailers alike. The head rotates to stow under the truck when you are not towing. For a heavy-duty truck driver who tows car haulers, horse trailers and heavy campers, this is the mount to buy.

B&W Tow & Stow TS20040B key specs

  • Type: Adjustable dual-ball mount
  • Receiver: 2.5 inch
  • Balls: 2 inch and 2-5/16 inch
  • Drop: 7 inch
  • Rise: 7.5 inch
  • Gross trailer weight: 18,000 lbs
  • Brand: B&W Trailer Hitches
  • Model: TS20040B
  • Stow: Rotates under the truck
  • Finish: Black
  • Use: Heavy-duty trucks
  • Warranty: Not published

B&W Tow & Stow TS20040B: fits and best for

The Tow & Stow TS20040B fits a heavy-duty truck driver with a 2.5 inch receiver who tows the heaviest trailers in this guide. It suits car haulers, horse trailers and large campers that need both height adjustment and a high towing weight. Check your receiver size first, because this mount fits a 2.5 inch receiver only.

B&W Tow & Stow TS20040B pros and watch-outs

  • 18,000-pound towing weight
  • 7 inch drop with 7.5 inch rise
  • Stows under the truck when not towing
  • Dual ball covers two coupler sizes
  • Built for heavy-duty trucks
  • Fits a 2.5 inch receiver only
  • Heaviest mount in this guide
  • Costs more than the 2 inch version
  • Not for weight distribution systems

B&W Tow & Stow TS20040B: what owners report

Owner reports in retailer reviews commonly note the TS20040B tows heavy trailers level, and the stow position is the feature owners mention most on a daily driver.

Owners also report the dual ball covers most couplers they own, though a few note the mount is heavy to lift, so use both hands. Hitch and Sway gives the Tow & Stow 18,000 lb on the 2-1/2 inch shank, with the stowing head owners like most.

B&W Tow & Stow TS20040B: who should not buy

Do not buy the TS20040B if your truck has a 2 inch receiver, because this mount fits a 2.5 inch receiver only. A half-ton truck driver should look at the TS10037B instead.

B&W Tow & Stow TS20040B: pair it with

Pair it with safety chains rated for 18,000 pounds.

We may earn a commission at no cost to you.

Check the receiver size before you order. Best Hard Tonneau Cover Under 500

Spec comparison

SpecB&W Tow & Stow TS10037BWeigh Safe 180 CTB8-2.5CURT 45900Andersen Rapid Hitch 3405B&W Tow & Stow TS20040B
Receiver2 inch2.5 inch2 inch2 inch2.5 inch
Balls2 and 2-5/16 inch2 and 2-5/16 inch2 and 2-5/16 inch2 and 2-5/16 inch2 and 2-5/16 inch
Drop5 inch8 inch6 inch6 inch7 inch
Rise5.5 inchNot published5-1/4 inch6 inch7.5 inch
Gross trailer weight10,000 lbs18,500 lbs14,000 lbs10,000 lbs18,000 lbs
MaterialSteelAluminumSteelAluminumSteel
Stow positionYesNoNoNoYes
Flip ballNoYesNoNoNo
Lock includedNot publishedDual-pin keyed lockNot publishedNot publishedNot published
Best forMost 2 inch receiversHeavy flip-ball towingBudget steelLightweight daily useHeavy 2.5 inch towing
Check PriceCheck PriceCheck PriceCheck PriceCheck PriceCheck Price

How to fit an adjustable hitch mount

Slide the shank into the receiver until the pin holes line up, then fit the pin and clip and pull the mount to check it is locked. Set the ball height so the trailer sits level: measure the coupler height with the trailer level, and set the ball to match. Grease the ball lightly, and torque the ball nuts to the maker figure. Best ATV Winch

Hook up the trailer, cross the safety chains under the coupler, and connect the lights and the breakaway cable. Check the lights, then pull forward slowly and brake to test the connection. Check the pin and the ball height again at the first fuel stop, because a new mount can settle. Never tow with the pin clip missing. Best Tow Ropes Under 100

If the job turns out to be recovery rather than towing, a hitch mount cannot help, and that is when a winch earns its place. Our Best ATV Winch guide covers the winches that pull a stuck vehicle free, while the mounts in this guide cover the towing that follows. Keep both tools straight, and neither job catches you without the right gear.

Safety essentials

  • Never tow over the lowest rating in the chain: mount, receiver, ball or trailer.
  • Check the hitch pin and clip before every tow, and carry a spare pin.
  • Cross the safety chains under the coupler, so the coupler cannot hit the road.
  • Never use an adjustable mount with a weight distribution system unless the maker allows it.
  • Check the ball nuts for tightness at the first fuel stop of every trip.
  • Remove the mount when you are not towing, or stow it, so it cannot hurt a pedestrian.

A hitch mount carries the whole trailer, so a wrong rating or a missing pin is a safety problem, not a small mistake. These rules keep the job safe, and the adjustable mount is a separate reward.

WARN Epic snatch block, rated for recovery work, so a stuck trailer can be pulled free.

GearAmerica tree saver strap, so a recovery anchor does not damage the tree or the strap.

AMBULL shackles, so recovery straps connect to the truck with a rated link.

Troubleshooting

If the trailer sways at highway speed, check the tongue weight before assuming the mount is wrong. Best Tool Storage

SymptomLikely causeFix
Trailer sways at speedToo little tongue weight, or nose-high trailerMove load forward, and lower the ball height
Mount rattles in the receiverLoose fit, or worn pinFit an anti-rattle pin, and replace a worn pin
Ball will not fit the couplerWrong ball size for the couplerFlip or swap to the other ball size
Mount is hard to removeRust, or a bent pinClean the receiver, grease the shank, and replace the pin
Trailer sits nose-highBall height set too highDrop the ball one pin hole and re-check level
Lights do not workLoose plug, or a blown fuseClean the plug contacts and check the trailer fuse

Who should NOT buy these

Do not buy an adjustable mount for one trailer at one height. If you tow a single trailer on a single truck, a fixed ball mount costs less and does the same job, because the height never changes. An adjustable mount earns its cost only when heights or ball sizes change. Read our Best Tow Ropes Under 100 guide if the truck, not the trailer, needs the upgrade.

Do not buy on towing weight alone. A mount rated to 18,000 pounds is useless on a 2 inch receiver rated to 10,000 pounds, because the lowest rating in the chain sets the limit. Check the receiver, the ball and the trailer ratings together, and buy the mount that matches the weakest link. Battery Tender Junior vs NOCO Genius1

Do not buy the wrong receiver size. A 2.5 inch mount will not fit a 2 inch receiver, and a 2 inch mount in a 2.5 inch receiver needs a sleeve and still tows at the lower rating. Measure the receiver opening before you order, and do not guess from the truck model alone. Warning Lights Reviews

Do not buy a mount and skip the lock. An adjustable mount is easy to remove, which makes it easy to steal, and a mount left in the receiver is a shin hazard in a parking lot. Budget for a hitch pin lock, and stow or remove the mount when you are not towing. Best First Aid Kit Under 50

Final verdict

Best Overall: B&W Tow & Stow TS10037B Check Price — The adjustable mount most drivers should buy.

Best Premium Flip: Weigh Safe 180 CTB8-2.5 Check Price — The premium flip-ball mount in this guide.

Best Value Steel: CURT 45900 Check Price — The budget steel mount in this guide.

Best Lightweight: Andersen Rapid Hitch 3405 Check Price — The lightest mount in this guide.

Best Heavy Duty: B&W Tow & Stow TS20040B Check Price — The heavy-duty mount in this guide.

FAQ

What is an adjustable hitch mount?

An adjustable hitch mount is a ball mount whose ball height can be changed, usually by moving the ball head along a channel or flipping the ball assembly. It replaces several fixed ball mounts, because one mount covers several trailer heights and, on most models, two ball sizes. It fits into the same receiver as a fixed mount.

How do I know what drop I need?

Measure from the ground to the top of your receiver opening, and from the ground to the bottom of the trailer coupler when the trailer is level. The difference is the drop you need. If the receiver is higher than the coupler, you need drop; if it is lower, you need rise. Pick a mount that covers your figure with room to spare.

What is the difference between a 2 inch and a 2.5 inch receiver?

The receiver size is the inside width of the square opening on your truck. Most half-ton trucks and SUVs have a 2 inch receiver, while most heavy-duty trucks have a 2.5 inch receiver. A mount must match the receiver size, so measure the opening before you order, because the truck model alone does not always tell you.

Can an adjustable hitch mount replace a winch?

No, not for recovery. A winch pulls a stuck vehicle free, while an adjustable hitch mount tows a trailer down the road, and the two jobs need different tools. The mount is the alternative to a winch only when the job is towing: one mount covers several trailers at several heights. If the job is pulling a stuck truck out of mud, buy a winch, because no hitch mount does that work.

Is the B&W Tow & Stow worth it?

The Tow & Stow is worth it if you tow several trailers and want the mount to disappear under the truck when you are not towing. The dual ball and the adjustable height cover most trailers, and the stow position keeps it out of the way. If you tow one trailer and never remove the mount, a cheaper channel mount does the same towing job.

Do I need a weight distribution hitch instead?

An adjustable ball mount is not a weight distribution hitch, and it does not spread tongue weight across the axles. If your trailer tongue weight pushes the truck rear down, or the trailer sways, you need a weight distribution system. Check your trailer weight first, because a ball mount alone cannot fix a weight problem.

How much tongue weight can an adjustable mount carry?

Tongue weight depends on the mount and the receiver, and the mounts in this guide list tongue weights from 1,000 to over 2,000 pounds. The Andersen Rapid Hitch lists 1,500 pounds. Check the tongue weight of your loaded trailer, and never exceed the lowest rating in the chain, because the mount is only one link.

Can I use an adjustable mount with a weight distribution system?

Most adjustable ball mounts are not rated for weight distribution systems, including the B&W Tow & Stow, so check the maker page before you try. A weight distribution system needs its own shank and head. If you tow with weight distribution, buy a mount that the maker lists as compatible.

How do I stop my hitch mount from rattling?

A rattle usually comes from a loose fit between the shank and the receiver, or a worn pin. Fit an anti-rattle pin or a clamp that presses the shank against the receiver wall, and replace a worn pin. Grease the shank lightly, and check the pin clip at every stop, because a loose pin is a safety problem.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

B and W Trailer Hitches Tow and Stow Adjustable Trailer Hitch Ball Mount – Fits 2 inch Receiver, Dual Ball (2 inch x 2-5/16 inch), 5 inch Drop, 10,000 GTW – TS10037B

Leave a Comment