A light bar, a winch, or a set of driving lights is only as good as its wiring. A relay harness kit gives you the relay, the fuse, the switch and the wire in one box, ready to run power from the battery to the light. A connector kit gives you the terminals and the crimp tool to join wires yourself, which is a different job with a different result.
Most wiring jobs fail on the connection, not on the wire. A loose crimp heats up, a bare joint corrodes, and a switch wired without a relay burns out. The choice between a wiring kit and a connector kit is really a choice between buying the whole circuit ready-made and building the connections yourself.
This guide compares automotive wiring kits and connectors, and profiles five relay wiring harness kits, all checked against live Amazon listings. Each one is a complete harness with a relay, a fuse and a switch, and each one suits a different light setup, from a single-lead bar to a two-lead pair of pods.
The 30-second answer
Buy a wiring kit when you want the whole circuit ready-made, and buy connectors when you are joining wires yourself. For the kit, buy the MICTUNING LED Light Bar Wiring Harness 40A 2 Lead Check Price for the best all-round 40-amp two-lead harness. Buy the MICTUNING LED Light Bar Wiring Harness Rocker Blue Check Price for a rocker switch harness. Buy the Nilight 10036W 14AWG Wiring Harness Kit 2 Lead Check Price for a 14AWG harness with DT connectors. Buy the Nilight 10016W DT Wiring Harness Kit 2 Lead Check Price for a 16AWG DT harness rated at 180 watts. Buy the Nilight 14AWG Wiring Harness Kit 1 Lead Check Price for a single-lead heavy-duty harness.
How we researched this guide
We profiled five wiring harness kits, checked Amazon listing data for each one through the Creators API, and compared wire gauge, lead count, relay and fuse ratings, switch type and connector type from the listings. Where a listing states the gauge or the relay rating, we recorded those numbers exactly rather than guessing the capacity.
Our quick picks
Best Overall Harness
MICTUNING LED Light Bar Wiring Harness 40A 2 Lead
Best all-round harness: a 40-amp relay, a fuse and an on-off switch on a two-lead kit for off-road lights.
Best Rocker Switch Harness
MICTUNING LED Light Bar Wiring Harness Rocker Blue
Best rocker switch harness: a 40-amp relay, a fuse and a blue on-off rocker switch on a two-lead kit.
Best 14AWG Harness
Nilight 10036W 14AWG Wiring Harness Kit 2 Lead
Best 14AWG harness: 11.5 feet of 14AWG wire with DT connectors, a relay, a blade fuse and two leads.
Best DT Connector Harness
Nilight 10016W DT Wiring Harness Kit 2 Lead
Best DT connector harness: 16AWG wire, 12 feet, 180 watts, with a DT connector, relay and blade fuse.
Best Single Lead Harness
Nilight 14AWG Wiring Harness Kit 1 Lead
Best single-lead harness: heavy-duty 14AWG wire with a relay, a blade fuse and an on-off switch for one light.
Quick comparison
| Product | Leads | Use | Warranty | Check Price |
|---|---|---|---|---|
| MICTUNING LED Light Bar Wiring Harness 40A 2 Lead | 40A, 2 leads | Two off-road lights | Not published | Check Price |
| MICTUNING LED Light Bar Wiring Harness Rocker Blue | 40A, rocker, 2 leads | Two lights, glove use | Not published | Check Price |
| Nilight 10036W 14AWG Wiring Harness Kit 2 Lead | 14AWG, 11.5 ft, DT | Wet and muddy installs | Not published | Check Price |
| Nilight 10016W DT Wiring Harness Kit 2 Lead | 16AWG, 12 ft, 180W | Lights up to 180W | Not published | Check Price |
| Nilight 14AWG Wiring Harness Kit 1 Lead | 14AWG, 1 lead | One light bar | Not published | Check Price |
How to choose between a wiring kit and connectors
Wiring kit or connector kit
A wiring kit gives you the whole circuit: relay, fuse, switch and wire, ready to run power from the battery to the light. A connector kit gives you terminals and a crimp tool to join wires you already have. Buy a wiring kit when you are fitting a new light and want the circuit done, and buy connectors when you are repairing or extending wiring that already exists. Best Storage Bins
Wire gauge
Wire gauge decides how much current the harness can carry safely. Thicker wire, a lower gauge number, carries more current: 14AWG carries more than 16AWG, and both beat thin wire that heats up under load. Check the wattage of your light, work out the current it draws, and choose a gauge that carries it with room to spare. Never run a big bar on thin wire. Best Tool Storage
Relay and fuse
A relay and a fuse are the two parts that keep the wiring safe. The relay lets a small switch control a large current, so the switch never carries the full load, and the fuse breaks the circuit if a wire shorts. Every harness in this guide includes both, and a kit without them is not a complete wiring kit. Never wire a light without a relay and a fuse. Best Tow Ropes Under 100
Lead count
Lead count decides how many lights one harness feeds. A one-lead harness feeds one bar, and a two-lead harness feeds a pair of pods or a bar with two feeds. Count your lights before you buy, because a harness with too few leads leaves a light unwired, and a harness with a spare lead leaves wire flapping in the engine bay. Buy the lead count that matches your lights. Battery Tender Junior vs NOCO Genius1
Connector type
Connector type decides whether the joint stays dry. A DT connector seals against water and dust, which matters on a bumper in rain, while a plain crimp joint needs heat-shrink tubing to seal it. Check the plug on your light first: a DT plug needs a DT harness, and a bare-wire light needs a connector kit with the right terminals. Match the plug, not just the wire. Warning Lights Reviews
Switch type
Switch type decides how you control the light. A plain on-off switch is simple and cheap, a rocker switch is easy to use with gloves and reads clearly on a dark dash, and a remote-control harness adds a fob. Choose the switch you can find in the dark, fit it where you can reach it without looking, and label it so a passenger never switches the lights on by mistake. Best First Aid Kit Under 50
Wiring harnesses by budget
| Tier | What you get | Example pick |
|---|---|---|
| Entry | A single-lead 14AWG harness with relay and fuse, for one light bar. | Nilight 14AWG Wiring Harness Kit 1 Lead |
| Mid | A two-lead 40-amp harness with a rocker switch, for a pair of lights. | MICTUNING LED Light Bar Wiring Harness Rocker Blue |
| Top | A 14AWG two-lead harness with DT connectors, for a sealed install in rain and mud. | Nilight 10036W 14AWG Wiring Harness Kit 2 Lead |
Wiring kits and connector types compared
| Type | How it works | Best for | Watch out for |
|---|---|---|---|
| Relay wiring harness | A complete kit: relay, fuse, switch and wire in one box. | Fitting a new light | Lead count is fixed |
| DT connector harness | A harness with sealed DT plugs for wet installs. | Bumpers in rain | Plug must match the light |
| Butt connector kit | Terminals and a crimp tool to join two wires end to end. | Repairs and extensions | Needs heat-shrink to seal |
| Heat-shrink connector kit | Terminals with heat-shrink sleeves that seal the joint. | Wet and exposed joints | Needs a heat gun to fit |
Detailed reviews
Each harness below suits a different light setup: a two-lead pair, a rocker switch dash, a sealed DT install, a rated 180-watt run, and a single bar. Count your lights and check the plug before you buy, because both decide which harness fits.
Best Overall Harness: MICTUNING LED Light Bar Wiring Harness 40A 2 Lead
Best Overall Harness
Why the MICTUNING 40A 2 Lead is our pick
The MICTUNING 40-amp harness is the overall pick because it is the complete circuit in one box: a 40-amp relay to carry the load, a fuse to protect the wiring, and an on-off switch to control it, with two leads for a pair of lights. The relay does the heavy work, so the switch only carries a small control current and lasts far longer than a switch wired direct. It is the straightforward choice when you are fitting one or two off-road lights and want the wiring done right first time.
MICTUNING 40A 2 Lead key specs
- Relay: 40 amps
- Fuse: Yes
- Switch: On-off switch
- Leads: 2 leads
- Use: Off-road power
- Kit: Wiring harness
- Model: MIC-B1002
- Vehicle: Off-road lights
- Power: 12V
- Listing: Verified
MICTUNING 40A 2 Lead: fits and best for
This harness fits a driver fitting one or two off-road lights who wants the whole circuit in one box. It suits light bars and pods on a truck, SUV or Wrangler, and it works best when the relay sits near the battery.
MICTUNING 40A 2 Lead pros and watch-outs
- 40-amp relay carries the load
- Fuse protects the wiring
- Two leads for a pair of lights
- Switch lasts longer on a relay
- Complete kit in one box
- Two leads only, no third lead
- Check the wire length for your vehicle
- Switch style is a plain on-off
MICTUNING 40A 2 Lead: what owners report
Owner reports in retailer reviews commonly note that the relay and fuse in the box make the install simple, and that the switch feels solid after months of use.
Owners also report that the two-lead layout suits a pair of pods or a single bar with two feeds, and that the harness is easy to route along the firewall.
MICTUNING 40A 2 Lead: who should not buy
Do not buy this if you need more than two leads. A three-light setup needs a second harness or a different kit, because this one only feeds two.
MICTUNING 40A 2 Lead: pair it with
Pair it with a fuse check at the battery, and route the harness away from hot exhaust parts and moving belts.
We may earn a commission at no cost to you.
Mount the relay near the battery and keep the fuse in the feed close to the battery, so a short blows the fuse, not the wiring. ABS Scan Tools vs OBDII
Best Rocker Switch Harness: MICTUNING LED Light Bar Wiring Harness Rocker Blue
Best Rocker Switch Harness
Why the MICTUNING Rocker Blue is our pick
The MICTUNING rocker switch harness is the rocker pick because the switch is the part you touch every day, and a rocker switch is easier to use with gloves than a small toggle. The kit still gives you the 40-amp relay and the fuse, so the rocker only carries control current, and the two leads feed a pair of lights. The blue rocker also reads clearly on a dark dash. It is the pick when the switch matters as much as the wiring.
MICTUNING Rocker Blue key specs
- Relay: 40 amps
- Fuse: Yes
- Switch: On-off rocker, blue
- Leads: 2 leads
- Use: Off-road power
- Kit: Wiring harness
- Model: MIC-B1003
- Vehicle: Off-road lights
- Power: 12V
- Listing: Verified
MICTUNING Rocker Blue: fits and best for
This harness fits a driver who wants a rocker switch on the dash, for use with gloves or in the dark. It suits trucks and off-road vehicles where the switch sits on the dash and gets used often.
MICTUNING Rocker Blue pros and watch-outs
- Blue rocker switch, easy to find
- 40-amp relay carries the load
- Fuse protects the wiring
- Two leads for a pair of lights
- Rocker works with gloves
- Two leads only
- Rocker needs a dash cut-out
- Check the wire length for your vehicle
MICTUNING Rocker Blue: what owners report
Owner reports in retailer reviews commonly note that the blue rocker is easy to find in the dark, and that the switch still feels crisp after a season of use.
Owners also report that the relay and fuse make the install safe, and that the two-lead layout suits a pair of pods on the bumper.
MICTUNING Rocker Blue: who should not buy
Do not buy this if your dash has no room for a rocker switch. A rocker needs a cut-out or a blank switch panel, so check the dash before you order.
MICTUNING Rocker Blue: pair it with
Pair it with a blank switch panel on the dash, and label the rocker so a passenger never switches the lights on by mistake.
We may earn a commission at no cost to you.
Fit the rocker where you can reach it without looking, and label it so you never switch the lights on in traffic by mistake. AGM Batteries Review for Cars
Best 14AWG Harness: Nilight 10036W 14AWG Wiring Harness Kit 2 Lead
Best 14AWG Harness
Why the Nilight 10036W is our pick
The Nilight 10036W is the 14AWG pick because the wire gauge is the part that decides how much current the harness can carry safely, and 14AWG is a solid middle gauge for off-road lights. The kit gives you 11.5 feet of it, DT connectors that seal against water and dust, a power relay, a blade fuse, and an on-off switch, with two leads for a pair of lights. It is the pick when you want thicker wire and sealed connectors for a light that lives outside in rain and mud.
Nilight 10036W key specs
- Wire: 14AWG
- Length: 11.5 feet
- Connector: DT connector
- Relay: Power relay
- Fuse: Blade fuse
- Switch: On-off switch
- Leads: 2 leads
- Use: LED light bar and work light
- Power: 12V
- Listing: Verified
Nilight 10036W: fits and best for
This harness fits a driver fitting lights on a vehicle that sees rain, mud and dust, where sealed DT connectors matter. It suits trucks, SUVs and off-road rigs with a long run from the battery to the lights.
Nilight 10036W pros and watch-outs
- 14AWG wire carries more current
- DT connectors seal against water
- 11.5 feet reaches most mounting points
- Blade fuse, easy to replace
- Relay and switch in the box
- Two leads only
- 14AWG is stiffer to route than 16AWG
- Check the DT plug matches your light
Nilight 10036W: what owners report
Owner reports in retailer reviews commonly note that the DT connectors click together firmly and stay sealed in rain, and that the 14AWG wire feels substantial in the hand.
Owners also report that the 11.5-foot length reaches from the battery to the bumper on most trucks without an extension.
Nilight 10036W: who should not buy
Do not buy this if your light uses a different plug. The DT connector is standard on many Nilight lights, but other brands use other plugs, so check the plug first.
Nilight 10036W: pair it with
Pair it with dielectric grease on the DT connectors, and tie the harness away from the exhaust and the belts.
We may earn a commission at no cost to you.
Put a dab of dielectric grease on the DT connectors before you join them, so they seal against water and come apart cleanly later. AGM Batteries Cost
Best DT Connector Harness: Nilight 10016W DT Wiring Harness Kit 2 Lead
Best DT Connector Harness
Why the Nilight 10016W is our pick
The Nilight 10016W is the DT connector pick because it pairs the sealed DT plug with a clear power rating: 180 watts over 16AWG wire, 12 feet long, with a relay, a blade fuse and an on-off switch on two leads. The 180-watt rating tells you exactly what it can carry, so you can match it to your light without guessing. The DT connector seals the joint against water, which matters when the light sits on a bumper in rain. It is the pick when you want a rated, sealed harness for a light up to 180 watts.
Nilight 10016W key specs
- Wire: 16AWG
- Length: 12 feet
- Rating: 180 watts
- Connector: DT connector
- Relay: Power relay
- Fuse: Blade fuse
- Switch: 12V on-off switch
- Leads: 2 leads
- Use: LED light bars
- Listing: Verified
Nilight 10016W: fits and best for
This harness fits a driver with a light bar or a pair of pods up to 180 watts who wants a sealed DT connection. It suits bumpers and roof racks where the wiring meets rain and road spray.
Nilight 10016W pros and watch-outs
- Clear 180-watt rating
- DT connector seals the joint
- 12 feet reaches most mounting points
- Blade fuse, easy to replace
- Relay and switch in the box
- 180-watt limit, check your light first
- 16AWG is thinner than 14AWG
- Two leads only
Nilight 10016W: what owners report
Owner reports in retailer reviews commonly note that the 180-watt rating makes matching easy, and that the DT connector stays dry through rain and car washes.
Owners also report that the 12-foot length is enough for a bumper mount on most trucks, with a little slack to route neatly.
Nilight 10016W: who should not buy
Do not buy this for a light over 180 watts. A bigger bar needs the 14AWG harness or a heavier kit, because this one is rated for 180 watts.
Nilight 10016W: pair it with
Pair it with a check of your light wattage first, and keep the DT connector clean and greased so it seals every time.
We may earn a commission at no cost to you.
Add up the watts of every light on the harness before you buy, and keep the total under 180 watts. AGM Batteries vs Flooded
Best Single Lead Harness: Nilight 14AWG Wiring Harness Kit 1 Lead
Best Single Lead Harness
Why the Nilight 1 Lead is our pick
The Nilight single-lead harness is the one-light pick because sometimes you only need to wire one bar, and a two-lead kit leaves a spare lead flapping in the engine bay. This kit gives you the same heavy-duty 14AWG wire, the same power relay and blade fuse, and the same on-off switch, but with one lead for one light. It is the pick for a single bar or a single work light, where a clean one-lead install beats a two-lead kit with a spare.
Nilight 1 Lead key specs
- Wire: 14AWG heavy duty
- Relay: Power relay
- Fuse: Blade fuse
- Switch: 12V on-off switch
- Leads: 1 lead
- Use: Off-road LED work light
- Kit: Wiring harness
- Vehicle: Off-road lights
- Power: 12V
- Listing: Verified
Nilight 1 Lead: fits and best for
This harness fits a driver wiring a single light bar or a single work light, who wants a clean install with no spare lead. It suits a truck or SUV with one bar on the bumper or the roof.
Nilight 1 Lead pros and watch-outs
- One lead, no spare flapping
- Heavy-duty 14AWG wire
- Power relay and blade fuse
- On-off switch in the box
- Clean single-light install
- One lead only, no second light
- Check the wire length for your vehicle
- No DT connector stated in the title
Nilight 1 Lead: what owners report
Owner reports in retailer reviews commonly note that the single lead makes a tidy install, with no spare wire to tie up or tuck away.
Owners also report that the heavy-duty wire and the relay give them confidence on a long night drive, because the switch stays cool.
Nilight 1 Lead: who should not buy
Do not buy this if you plan to add a second light later. One lead feeds one light, so a second light will need a second harness.
Nilight 1 Lead: pair it with
Pair it with a tidy route along the firewall, and label the switch so you know which light it controls.
We may earn a commission at no cost to you.
Route the single lead neatly along the firewall and tie it off, so it never touches the exhaust or a moving belt. AGM Batteries vs Lead-Acid
Spec comparison
| Spec | MICTUNING 40A 2 Lead | MICTUNING Rocker Blue | Nilight 10036W | Nilight 10016W | Nilight 1 Lead |
|---|---|---|---|---|---|
| Relay | 40A | 40A | Power relay | Power relay | Power relay |
| Fuse | Yes | Yes | Blade fuse | Blade fuse | Blade fuse |
| Switch | On-off | Rocker blue | On-off | On-off | On-off |
| Leads | 2 | 2 | 2 | 2 | 1 |
| Wire gauge | Per listing | Per listing | 14AWG | 16AWG | 14AWG |
| Length | Per listing | Per listing | 11.5 ft | 12 ft | Per listing |
| Connector | Per listing | Per listing | DT | DT | Per listing |
| Rating | 40A | 40A | Per listing | 180W | Per listing |
| Best for | Two lights | Glove use | Wet installs | Lights to 180W | One light |
| Listing | Verified | Verified | Verified | Verified | Verified |
| Check Price | Check Price | Check Price | Check Price | Check Price | Check Price |
Installing a wiring harness kit
Disconnect the battery first, then run the harness from the battery to the light. Mount the relay near the battery, fit the fuse in the feed close to the battery, and run the wire along the firewall, tied away from hot exhaust parts and moving belts. Join the DT connectors or the bare wires at the light, then fit the switch on the dash where you can reach it. 12V Car Heaters Reviews Best Models
Reconnect the battery, switch the light on, and check that the relay clicks and the light burns steady. Check the switch stays cool, check the fuse, and tug every connection to confirm it is tight. A loose crimp heats up under load, so a connection that feels loose is a connection to remake before you drive. 12V Car Heaters vs AC
After the first week, tug connections and feel the relay and fuse holder for warmth, because a warm joint is a loose joint. Keep fuses in the glove box, and check the wiring after rain, since water finds any connector that is not seated.
Safety essentials
- Always disconnect the battery before you touch the wiring, because a live feed can short and spark.
- Always use a relay and a fuse, because a switch wired direct will burn out and the wiring can overheat.
- Never run wire near the exhaust or a moving belt, because heat and friction damage the insulation.
- Never join wires with a loose crimp, because a loose joint heats up and can melt the insulation.
- Keep the fuse close to the battery, because a short anywhere past the fuse is protected.
- Test the circuit before you drive, because a wiring fault found on the road is a breakdown.
Three accessories worth adding to the wiring kit: a one-lead DT harness, a two-lead harness, and a heat-shrink tubing kit. Each carries its own verified button below.
Nilight 10018W 14AWG DT Connector Wiring Harness Kit, 12V on-off switch, power relay and blade fuse, one lead, for a single light or a spare harness.
Nilight NI-WA 06 LED Light Bar Wiring Harness Kit, 2 leads, 12V on-off switch, power relay and blade fuse, for a second pair of lights.
Wirefy Heat Shrink Tubing Kit, 180 pieces, 3:1 ratio, adhesive lined, for sealing and protecting every crimp and splice.
Troubleshooting
Most harness problems trace to a loose connection or a wrong rating, and the fix is usually a remake of the joint or a heavier harness rather than a new light. 12V Car Heaters vs Electric Heaters
| Symptom | Likely cause | Fix |
|---|---|---|
| Light will not switch on | Blown fuse or loose relay | Check the fuse at the battery, test the relay, and check the switch wiring |
| Switch feels hot | Light wired without a relay | Stop using it, fit a relay, and wire the switch to the relay only |
| Connection heats up | Loose crimp or thin wire | Remake the crimp tight, or fit a heavier gauge harness |
| Light flickers | Loose ground or loose plug | Clean the ground point, tighten the DT connector, and check the plug |
| Fuse blows at once | Short in the wiring | Disconnect the battery, check the wire for a nick, and repair the insulation |
| Light is dim | Voltage drop on a long thin run | Shorten the run, or fit a heavier gauge harness with a relay near the battery |
Who should NOT buy these
Do not buy a harness by lead count alone. A two-lead harness is useless if its wire gauge cannot carry your light, and a heavy harness is wasted on a small pod. Check the wattage, check the gauge, and then count the leads. 12V Heater Review
Do not buy a connector kit when you need a whole circuit. Connectors join wires, but they do not give you a relay, a fuse or a switch. If you are fitting a new light from scratch, buy a wiring kit with the circuit in the box, and use connectors only to join or extend what is already there. Best Car Buffer for Scratches
Do not buy a harness without checking the plug. A DT plug will not join a bare-wire light, and a bare-wire harness will not plug into a DT light. Check the plug on your light first, and buy the harness that matches it. Best Car Buffer for Home Use
Do not buy the cheapest harness for a big bar. A thin-wire harness on a high-wattage bar heats up, drops voltage, and can melt. Match the gauge to the watts, and pay for the heavier harness when the light demands it. 12V Adapters Reviews for Cars
Final verdict
Best Overall Harness: MICTUNING 40A 2 Lead Check Price — the best all-round 40-amp two-lead harness.
Best Rocker Switch Harness: MICTUNING Rocker Blue Check Price — a rocker switch harness with a 40-amp relay.
Best 14AWG Harness: Nilight 10036W Check Price — a 14AWG harness with DT connectors.
Best DT Connector Harness: Nilight 10016W Check Price — a 16AWG DT harness rated at 180 watts.
Best Single Lead Harness: Nilight 1 Lead Check Price — a single-lead heavy-duty harness.
FAQ
What is the difference between a wiring kit and connectors?
A wiring kit is the whole circuit in one box: relay, fuse, switch and wire, ready to run power from the battery to a light. Connectors are the terminals and the crimp tool used to join wires together. Buy a wiring kit when you are fitting a new light, and buy connectors when you are repairing or extending wiring that already exists.
Do I need a relay for my light bar?
Yes, for any light bar over a few watts. A relay lets a small dash switch control a large current, so the switch never carries the full load and lasts far longer. Every harness in this guide includes a relay, and wiring a light bar straight to a switch will burn the switch out, so always use a relay.
What wire gauge do I need for a light bar?
It depends on the wattage and the length of the run. A 14AWG harness carries more current than a 16AWG harness, and both beat thin wire that heats up. The Nilight 10016W in this guide is rated at 180 watts on 16AWG, so a light over 180 watts needs the 14AWG harness or a heavier kit. Add up your watts first.
What is a DT connector?
A DT connector is a sealed plug used on many off-road lights, including Nilight bars. It clicks together and seals against water and dust, which matters when the light sits on a bumper in rain. The Nilight 10036W and 10016W harnesses in this guide use DT connectors, so check that your light has a DT plug before you buy one.
How many leads does my harness need?
One lead per light, or one lead per feed. A single bar needs one lead, and a pair of pods needs two leads. Count your lights before you buy, because a harness with too few leads leaves a light unwired, and a harness with a spare lead leaves wire flapping in the engine bay.
Can I use a wiring harness for a winch?
No, not a light bar harness. A winch draws far more current than a light bar, and a light harness would melt under the load. Winches need their own heavy-duty wiring with a much thicker gauge and a contactor. Use a light harness for lights only, and wire a winch with the kit made for it.
How do I crimp a connector properly?
Strip the wire to the length the terminal needs, push the wire fully into the terminal, and squeeze the crimp tool once, firmly, in the right slot. Tug the wire to check the crimp holds, then seal the joint with heat-shrink tubing. A loose crimp heats up under load, so a joint that pulls apart is a joint to remake.
Why does my light bar switch feel hot?
The light is wired without a relay, so the switch is carrying the full current. Stop using it, fit a relay harness, and wire the switch to the relay only, so the switch carries control current and the relay carries the load. A hot switch is a warning that the wiring is wrong.
What fuse should I use for my aux lights?
Use the fuse size the harness kit gives you, and keep a spare in the glovebox. The fuse protects the wiring, so it should sit in the feed close to the battery, and it should be sized for the wire gauge and the load. Never fit a bigger fuse to stop it blowing, because a fuse that never blows cannot protect the wiring.
Sources
- Amazon listing, MICTUNING 40A Wiring Harness, ASIN B00EZ9Y33W
- Amazon listing, MICTUNING Rocker Wiring Harness, ASIN B00PTQOF4W
- Amazon listing, Nilight 10036W Harness Kit, ASIN B08CGSH7TJ
- Amazon listing, Nilight 10016W Harness Kit, ASIN B076C4MXR1
- Amazon listing, Nilight 1 Lead Harness Kit, ASIN B073XMM3T5
- WinchInsider guide, Best ATV Winch
- WinchInsider guide, Best Jump Starter
- WinchInsider guide, Best Portable Air Compressor
- WinchInsider guide, Best Engine Oil
- WinchInsider guide, Best Automotive Multimeters vs Watts
- WinchInsider guide, Best Automotive Borescope for Mechanics
- MICTUNING maker site
- Nilight maker site
- AutoGuide, MICTUNING C2 rock lights review, wiring harness in the box
- Top5Best, best LED light wiring harness kits, Nilight 10014W
- Amazon listing, Nilight 10018W DT Wiring Harness Kit, ASIN B076C5HV59
- Amazon listing, Nilight NI-WA 06 Wiring Harness Kit, ASIN B071ZPX32N
- Amazon listing, Wirefy Heat Shrink Tubing Kit 180 Pcs, ASIN B084GDLSCK
By Leo, Founder, WinchInsider
Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.
Related guides
- 12V Adapters Reviews Best
- 12V Adapters for Beginners Guide
- 12V Adapters Review Amazon
- 12V Adapters Alternative for LED Lights
- 12V Adapters Alternative to USB
- Best ATV Winch
MICTUNING LED Light Bar Wiring Harness 40A 2 Lead