Alternatives to Adjustable Hitch Mounts for Trucks: 5 That Tow Better

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Your adjustable hitch mount rattles, slips a notch, or seizes solid the one morning you need to tow. The sliding shank that was supposed to fit every trailer has become the part you fight with most.

An adjustable mount is a compromise: it fits many trailers and none of them perfectly. The alternatives in this guide do one job properly instead, whether that job is levelling a heavy trailer, covering three coupler sizes, or holding one trailer at one height with nothing to move.

This guide compares five alternatives to adjustable hitch mounts for trucks, from weight distribution hitches with sway control to a simple fixed ball mount, so you can pick the setup that matches your trailer and forget about adjustments.

The 30-second answer

Buy the CURT 17601 TruTrack 2P Weight Distribution Hitch with Sway Control, 10K Check Price for the best overall alternative on a heavy trailer. Buy the Blue Ox BXW1000 SwayPro Weight Distributing Hitch Check Price for a trailer that sways. Buy the Reese Towpower 7031400 Tri-Ball Hitch with Hook Check Price for several trailers with different couplers. Buy the CURT 45030 Class III Trailer Hitch Ball Mount Check Price for one trailer at one height. Buy the Reese 21536 Trailer Hitch Ball Mount Starter Kit Check Price for a complete first tow setup.

How we researched this guide

We profiled five alternatives to adjustable hitch mounts, checked Amazon listing data for each one through the Creators API, and reviewed maker pages, towing guides and owner reports in retailer reviews about ratings, ball sizes, sway control and setup. Where a listing does not publish a figure, we say so instead of guessing.

Our quick picks

Best Overall

CURT 17601 TruTrack 2P Weight Distribution Hitch with Sway Control, 10K

Best for replacing an adjustable mount on a heavy trailer: weight distribution plus built-in sway control in one fixed setup.

Best Sway Control

Blue Ox BXW1000 SwayPro Weight Distributing Hitch

Best for a trailer that sways: a weight distribution hitch with built-in sway control and a 7-hole shank for height adjustment.

Best Multi-Ball

Reese Towpower 7031400 Tri-Ball Hitch with Hook

Best for towing several trailers with different couplers: three ball sizes plus a hook on one fixed mount.

Best Fixed Ball Mount

CURT 45030 Class III Trailer Hitch Ball Mount

Best for one trailer, done simply: a fixed Class III ball mount with a 7,500 lb rating and a 2 inch drop.

Best Starter Kit

Reese 21536 Trailer Hitch Ball Mount Starter Kit

Best for a first tow setup: a fixed ball mount kit with a 2 inch ball, pin and clip included, rated to 6,000 lb.

Quick comparison

Product Rating Use Warranty Check Price
CURT 17601 TruTrack 2P Weight Distribution Hitch with Sway Control, 10K 10,000 lb GTW, 1,000 lb tongue Heavy trailer towing Not published Check Price
Blue Ox BXW1000 SwayPro Weight Distributing Hitch Weight distribution, 7-hole shank Sway-prone trailers Not published Check Price
Reese Towpower 7031400 Tri-Ball Hitch with Hook Three balls, 2,000 to 10,000 lb Several trailers, one mount Not published Check Price
CURT 45030 Class III Trailer Hitch Ball Mount 7,500 lb, 2 inch drop One trailer, fixed height Not published Check Price
Reese 21536 Trailer Hitch Ball Mount Starter Kit 6,000 lb, ball included First tow setup Not published Check Price

How to choose an alternative to an adjustable hitch mount

Trailer weight and tongue weight

Trailer weight decides the whole setup, because a mount rated below your trailer is unsafe no matter how well it fits. Check the loaded trailer weight and the tongue weight, then pick a mount rated above both with room to spare. A weight distribution hitch is the answer when the trailer is heavy enough to squat the truck, while a fixed ball mount is enough for a light trailer. Best ATV Winch

Ball size and coupler match

The ball must match the trailer coupler exactly, because a 2 inch ball in a 1-7/8 inch coupler will not seat, and a small ball in a large coupler can jump off. Check the coupler stamping for its size, then buy the ball or the multi-ball mount that covers it. A tri-ball mount covers all three common sizes on one shank. Best Jump Starter

Sway control

Sway is the trailer moving sideways behind the truck, and it is the problem an adjustable mount never fixes. Weight distribution hitches with built-in sway control resist that movement through their spring bars. If your trailer sways in crosswinds or when lorries pass, sway control matters more than any adjustment feature. Best Portable Air Compressor

Fixed or multi-ball

A fixed mount does one height and one ball size, and does it with nothing to move, seize or rattle. A multi-ball mount trades a little simplicity for three ball sizes on one shank. Pick the fixed mount when you tow one trailer, and the multi-ball mount when you tow several trailers with different couplers. Best Engine Oil

Receiver size

The mount must fit the truck receiver, and most trucks use a 2 inch receiver, which every mount in this guide fits. Heavy trucks may use a 2-1/2 inch receiver, which needs a different shank or a reducer sleeve. Check the receiver opening before you order, because a mount that does not fit the receiver cannot tow at all. Best Automotive Multimeters vs Watts

Ease of fitting

A ball mount fits in minutes: slide it in, pin it, torque the ball and go. A weight distribution hitch takes longer, because the spring bars and the ball height must be set for your trailer. That setup time pays back on every tow afterwards, but it is real work the first time, so read the instructions before the trailer is hitched. Best Automotive Borescope for Mechanics

Alternatives to adjustable hitch mounts by budget

Tier What you get Example pick
Fixed ball mount A single fixed mount with one drop height, for one trailer at one height. CURT 45030
Starter kit A fixed mount with ball, pin and clip in the box, for a first tow setup. Reese 21536 Starter Kit
Multi-ball and weight distribution Three ball sizes on one mount, or a full weight distribution system with sway control. Reese Tri-Ball

Types of hitch mount alternatives compared

Type How it works Best for Watch out for
Fixed ball mount A solid shank with one drop height and one ball hole. One trailer at one height No adjustment if the height is wrong
Multi-ball mount Three balls welded to one shank, rotated to the size needed. Several trailers, different couplers Heavier than a single-ball mount
Weight distribution hitch Spring bars spread tongue weight across the truck axles. Heavy trailers that squat the truck Needs setup for your trailer
Pintle hook A hook and lunette ring connection for heavy off-road and farm trailers. Rough tracks and heavy loads Noisy, and needs a lunette ring coupler

Detailed reviews

Each mount below is a verified Amazon listing, checked live through the Creators API. Read the rating and the ball size before you buy, because those two decide whether the mount can tow your trailer at all.

Best Overall: CURT 17601 TruTrack 2P Weight Distribution Hitch with Sway Control, 10K

Best Overall

Why the CURT TruTrack 2P is our pick

The CURT TruTrack 2P is the overall pick because it replaces an adjustable ball mount with a complete towing system. The listing describes a weight distribution hitch rated for 10,000 lb gross trailer weight with 1,000 lb tongue weight, and sway control built into the hitch head, so there is no separate friction bar to fit. Spring bars spread the trailer tongue weight across the truck axles, which keeps the steering axle loaded and the trailer level. For a truck owner who tows a heavy travel trailer or car hauler, this is the alternative that actually improves towing, rather than just changing the mount.

CURT TruTrack 2P key specs

  • Type: Weight distribution hitch with sway control
  • Gross trailer weight: 10,000 lb
  • Tongue weight: 1,000 lb
  • Part: 17601 per listing title
  • Sway control: Built into the hitch head
  • Spring bars: Included per listing
  • Receiver: 2 inch per listing
  • Use: Heavy travel trailers and car haulers
  • Maker: CURT
  • Model: TruTrack 2P
  • Listing: Verified
  • Warranty: Not published

CURT TruTrack 2P: fits and best for

This hitch fits a truck owner who tows a heavy trailer and wants the trailer level and steady without adjusting a mount for every load. It suits travel trailer and car hauler owners who tow often enough that sway and sag are real problems.

CURT TruTrack 2P pros and watch-outs

  • Weight distribution plus sway control in one hitch
  • 10,000 lb gross trailer weight rating
  • 1,000 lb tongue weight rating
  • No separate friction sway bar to fit
  • Keeps the steering axle loaded
  • Heavier and more involved to fit than a ball mount
  • Needs correct spring bar setup for your trailer
  • Overkill for a light utility trailer
  • Warranty not published in the listing

CURT TruTrack 2P: what owners report

Owner reports in retailer reviews commonly note the TruTrack keeps a heavy trailer level and steady on the highway, and the built-in sway control means one less part to fit.

Owners also report the setup takes care the first time, though some note the spring bars need the right tension for the trailer. An RV forum thread recommends hitches with built-in sway dampening, naming the CURT TruTrack among them.

CURT TruTrack 2P: who should not buy

Do not buy this if you only tow a light utility trailer, because a weight distribution hitch is more hardware than a light trailer needs. A fixed ball mount below covers that job for far less.

CURT TruTrack 2P: pair it with

Pair it with a tongue weight scale, so the spring bar tension is set from a real measurement rather than a guess.

We may earn a commission at no cost to you.

Set the spring bars with the trailer loaded as you tow it: an empty-trailer setting will not hold once the trailer is loaded. Best Adjustable Wrench

Best Sway Control: Blue Ox BXW1000 SwayPro Weight Distributing Hitch

Best Sway Control

Why the Blue Ox SwayPro is our pick

The Blue Ox SwayPro is the sway control pick because it tackles the problem adjustable mounts cannot fix: a trailer that moves around behind the truck. The listing describes a weight distributing hitch for a 2 inch receiver with a 7-hole shank, so the ball height can be set to keep the trailer level. Sway control is built into the hitch, using spring bars that resist sideways movement, rather than a separate friction device. Forum advice for this exact problem names the Blue Ox SwayPro alongside the CURT TruTrack as the hitches to choose when sway control matters. For a truck owner whose trailer wanders in crosswinds or when a lorry passes, this is the fix.

Blue Ox SwayPro key specs

  • Type: Weight distribution hitch with sway control
  • Receiver: 2 inch
  • Shank: 7-hole, for height setting
  • Sway control: Built in, spring bar type
  • Use: Trailers that sway in wind or traffic
  • Maker: Blue Ox
  • Model: BXW1000 SwayPro
  • Gross trailer weight: Per listing
  • Tongue weight: Per listing
  • Listing: Verified
  • Warranty: Not published
  • Finish: Per listing

Blue Ox SwayPro: fits and best for

This hitch fits a truck owner whose trailer sways in crosswinds or when larger vehicles pass, and who wants the sway control built into the hitch rather than bolted on. It suits travel trailer owners who tow on highways.

Blue Ox SwayPro pros and watch-outs

  • Built-in sway control, no add-on bar
  • 7-hole shank sets the ball height
  • Spring bars spread tongue weight
  • Named in owner forums for sway problems
  • Fits a standard 2 inch receiver
  • Gross weight rating not published in the listing
  • Heavier than a simple ball mount
  • Needs setup for your trailer weight
  • Warranty not published in the listing

Blue Ox SwayPro: what owners report

Owner reports in retailer reviews commonly note the SwayPro calms a trailer that used to wander, and the 7-hole shank makes levelling the trailer straightforward.

Owners also report the hitch feels solid once set up, though some note the first setup takes time, so reading the instructions before the first tow helps. An RV forum thread names the Blue Ox SwayPro as a hitch with built-in sway dampening.

Blue Ox SwayPro: who should not buy

Do not buy this if your trailer never sways and is light, because a weight distribution hitch adds weight and setup a light trailer does not need. A fixed ball mount is the simpler answer there.

Blue Ox SwayPro: pair it with

Pair it with a spare hitch pin and clip, so a lost pin never strands the trailer at a rest stop.

We may earn a commission at no cost to you.

Count the shank holes from the bottom when you set the height, and write the number down: it makes refitting after removal a one-minute job. Best All-Season Tires Under 100

Best Multi-Ball: Reese Towpower 7031400 Tri-Ball Hitch with Hook

Best Multi-Ball

Why the Reese Tri-Ball is our pick

The Reese Tri-Ball is the multi-ball pick because it solves the one real reason people buy adjustable mounts: different trailers need different ball sizes. This fixed mount carries three chrome balls, 1-7/8 inch, 2 inch and 2-5/16 inch, plus a tow hook, so rotating the mount changes the ball instead of swapping hardware. Roundups list the capacities as 2,000 lb on the 1-7/8 inch ball, 6,000 lb on the 2 inch ball and 10,000 lb on the 2-5/16 inch ball, with the hook rated to 10,000 lb. There is nothing to adjust and nothing to slip: pick the ball, pin the mount and tow. For a truck owner with a boat trailer, a utility trailer and a car hauler, this one mount covers all three.

Reese Tri-Ball key specs

  • Type: Tri-ball ball mount with tow hook
  • Balls: 1-7/8, 2 and 2-5/16 inch chrome
  • Capacity 1-7/8 inch ball: 2,000 lb
  • Capacity 2 inch ball: 6,000 lb
  • Capacity 2-5/16 inch ball: 10,000 lb
  • Hook: Rated to 10,000 lb
  • Receiver: 2 inch per listing
  • Maker: Reese Towpower
  • Model: 7031400
  • Finish: Chrome balls
  • Listing: Verified
  • Warranty: Not published

Reese Tri-Ball: fits and best for

This mount fits a truck owner who tows two or three trailers with different coupler sizes and is tired of swapping balls. It suits farms, workshops and anyone whose trailers were bought at different times.

Reese Tri-Ball pros and watch-outs

  • Three ball sizes on one mount
  • No adjustment to slip or seize
  • Hook included for recovery work
  • 10,000 lb top capacity
  • Simple fixed design
  • Heavier than a single-ball mount
  • The unused balls sit exposed
  • No height adjustment
  • Warranty not published in the listing

Reese Tri-Ball: what owners report

Owner reports in retailer reviews commonly note the tri-ball mount ends the ball-swapping chore, and rotating the mount to the right ball takes seconds.

Owners also report the hook earns its keep for recovery, though some note the mount is heavy to carry, so it lives in the receiver rather than the toolbox. A ball hitch roundup lists the Reese triple ball mount at 2,000, 6,000 and 10,000 lb across its three balls.

Reese Tri-Ball: who should not buy

Do not buy this if you tow only one trailer, because two of the three balls will never be used. A single fixed ball mount does the same job for less.

Reese Tri-Ball: pair it with

Pair it with a coupler lock, so the trailer cannot be unhitched while the mount stays on the truck.

We may earn a commission at no cost to you.

Grease the ball you use most and wipe the others: chrome balls rust where they sit unused. Best All-Season Tires Under 200

Best Fixed Ball Mount: CURT 45030 Class III Trailer Hitch Ball Mount

Best Fixed Ball Mount

Why the CURT 45030 is our pick

The CURT 45030 is the fixed ball mount pick because it is the honest alternative to an adjustable mount for the most common case: one truck, one trailer, one height. The listing describes a Class III ball mount for a 2 inch receiver, rated for 7,500 lb gross trailer weight, with a 2 inch drop and a 3/4 inch rise and a 1 inch ball hole. It is CNC-formed and robotically welded, with a gloss black powder coat. There is no sliding shank, no pins to seize and no rattle from a loose adjustment: the mount goes in, the pin goes through and the trailer sits level. For a truck owner who tows the same trailer every time, this is the mount an adjustable one was trying to be.

CURT 45030 key specs

  • Type: Fixed Class III ball mount
  • Receiver: 2 inch
  • Gross trailer weight: 7,500 lb
  • Drop: 2 inch
  • Rise: 3/4 inch
  • Ball hole: 1 inch
  • Finish: Gloss black powder coat
  • Build: CNC-formed, robotically welded
  • Maker: CURT
  • Model: 45030
  • Listing: Verified
  • Warranty: Not published

CURT 45030: fits and best for

This mount fits a truck owner who tows one trailer at one height and wants the simplest, strongest connection. It suits utility trailer, boat trailer and small camper owners with a settled setup.

CURT 45030 pros and watch-outs

  • Fixed design, nothing to slip or seize
  • 7,500 lb gross trailer weight rating
  • CNC-formed and robotically welded
  • Gloss black powder coat
  • Fits a standard 2 inch receiver
  • No height adjustment at all
  • Ball sold separately
  • Only one drop height
  • Warranty not published in the listing

CURT 45030: what owners report

Owner reports in retailer reviews commonly note the 45030 fits tight with no rattle, and the fixed design means there is nothing to work loose on a long tow.

Owners also report the powder coat holds up well, though some note the ball must be bought separately, so the mount alone does not tow. Tractor Supply lists CURT fixed ball mounts by drop and capacity.

CURT 45030: who should not buy

Do not buy this if your trailer sits more than 2 inches off level, because a fixed 2 inch drop cannot correct a bigger mismatch. Measure the drop first, and pick a different fixed drop if needed.

CURT 45030: pair it with

Pair it with a 2 inch chrome hitch ball with a 1 inch shank, so the ball matches the mount hole exactly.

We may earn a commission at no cost to you.

Measure the trailer coupler height with the trailer level, then subtract the receiver height: that number is the drop you need. Best Garage Security Cameras Under 100

Best Starter Kit: Reese 21536 Trailer Hitch Ball Mount Starter Kit

Best Starter Kit

Why the Reese 21536 Starter Kit is our pick

The Reese 21536 is the starter kit pick because it is the complete answer for a truck owner who has never towed and does not want to buy the parts one by one. The listing describes a trailer hitch ball mount starter kit that fits a 2 inch square receiver, with a 2 inch drop, a maximum capacity of 6,000 lb, and a 2 inch chrome hitch ball, hitch pin and clip in the box. There is no adjustment to learn and no separate ball to order: the kit is the whole connection. For a first trailer, a borrowed utility trailer or a small boat, this is the cheapest honest way to start towing, and it is also the kit to keep as a spare once a heavier setup is bought.

Reese 21536 Starter Kit key specs

  • Type: Fixed ball mount starter kit
  • Receiver: 2 inch square
  • Drop: 2 inch
  • Capacity: 6,000 lb maximum
  • Ball: 2 inch chrome, included
  • Pin and clip: Included
  • Maker: Reese
  • Model: 21536
  • Use: First tow setup, light trailers
  • Finish: Per listing
  • Listing: Verified
  • Warranty: Not published

Reese 21536 Starter Kit: fits and best for

This kit fits a truck owner setting up a first tow, or anyone who needs a complete spare mount in the toolbox. It suits light utility trailers, small boats and borrowed trailers.

Reese 21536 Starter Kit pros and watch-outs

  • Ball, pin and clip all included
  • 6,000 lb capacity covers light trailers
  • Fixed design, nothing to adjust
  • Ready to tow out of the box
  • Good spare to keep in the truck
  • Only a 2 inch ball, no other sizes
  • 2 inch drop only
  • Not for heavy trailers
  • Warranty not published in the listing

Reese 21536 Starter Kit: what owners report

Owner reports in retailer reviews commonly note the 21536 is the kit first-time towers buy because everything is in the box, and the 6,000 lb rating covers most light trailers.

Owners also report it makes a handy spare, though some note the 2 inch ball does not fit trailers with a 1-7/8 inch coupler. A Tacoma ball hitch roundup lists the Reese starter kit at 6,000 lb with ball, pin and clip included.

Reese 21536 Starter Kit: who should not buy

Do not buy this if your trailer needs a bigger ball or weighs more than 6,000 lb loaded, because the kit cannot stretch to either. Check the coupler size and the trailer weight first.

Reese 21536 Starter Kit: pair it with

Pair it with a trailer coupler lock, so the trailer stays hitched to the truck when it is parked.

We may earn a commission at no cost to you.

Check the pin and clip before every tow: a missing clip is the most common reason a mount works loose. Best Garage Storage

Spec comparison

Spec CURT TruTrack 2P Blue Ox SwayPro Reese Tri-Ball CURT 45030 Reese 21536 Starter Kit
Gross trailer weight 10,000 lb Per listing 10,000 lb top ball 7,500 lb 6,000 lb
Tongue weight 1,000 lb Per listing Per listing Per listing Per listing
Sway control Built in Built in None None None
Ball sizes Per listing Per listing 1-7/8, 2, 2-5/16 inch 1 inch hole, ball separate 2 inch, included
Receiver 2 inch 2 inch 2 inch 2 inch 2 inch square
Drop Per listing 7-hole shank Per listing 2 inch 2 inch
Hook None None Rated to 10,000 lb None None
Setup Spring bars, set once Spring bars, set once Rotate to the ball Slide in and pin Slide in and pin
Best for Heavy trailers Sway-prone trailers Several trailers One trailer First tow setup
Parts included Spring bars per listing Shank per listing Three balls and hook Mount only Ball, pin and clip
Listing Verified Verified Verified Verified Verified
Check Price Check Price Check Price Check Price Check Price Check Price

How to fit a fixed hitch mount

Measure the trailer coupler height with the trailer level, then measure the truck receiver height with the truck loaded as you tow it. The difference is the drop you need, and the mount you buy must match it. A trailer that sits nose-high or nose-low tows badly and wears tyres unevenly. Best Hard Tonneau Cover Under 500

Slide the mount into the receiver, fit the pin and clip, then torque the hitch ball to the maker figure if the ball is separate. A loose ball is the most common towing failure, so this step is not optional. Check that the coupler latches fully and the safety chains cross under the tongue before you move. Best Mud Flaps

For a weight distribution hitch, set the spring bar tension with the trailer loaded as you tow it, and check the truck sits level front and rear. Drive a short test route first and recheck the pin, the ball and the coupler before the long tow. Best Performance Monitors Under 100

Safety essentials

  • Never tow above the lowest rating in your setup.
  • Check the hitch pin and clip before every tow.
  • Cross the safety chains under the trailer tongue.
  • Test the trailer brakes before leaving the driveway.
  • Never stand between the truck and a rolling trailer.
  • Re-torque the hitch ball after the first tow.

A fixed mount is simple, but the connection still carries the whole trailer. These rules keep the tow safe, and the trailer brakes and lights are a separate check.

Anker 320 24W Dual-USB Mini Car Charger, to keep a phone charged while you work.

LISEN 48W USB C Car Charger Adapter 2 Pack, so a phone and a second device stay charged.

UGREEN 130W USB C Car Charger with Cable, for fast charging on long days away from home.

Troubleshooting

Most hitch mount problems trace to the wrong drop, a loose ball or a missing pin, and the fix is usually a measurement rather than a replacement. Best Performance Monitors Under 100

Symptom Likely cause Fix
Trailer sits nose-high or nose-low Wrong drop height on the mount Measure the drop and fit the right fixed mount
Mount rattles in the receiver Loose fit or worn pin hole Fit an anti-rattle device or replace the pin
Trailer sways at speed No sway control, or poor weight balance Fit a weight distribution hitch with sway control
Ball will not seat in the coupler Ball size does not match the coupler Check the coupler stamping and fit the right ball
Hitch pin will not go through Mount and receiver holes misaligned Clean the receiver and check the pin size
Coupler jumps off the ball Coupler not latched, or wrong ball size Latch the coupler fully and check the ball size

Who should NOT buy these

Do not buy an adjustable mount for one trailer. The sliding shank adds rattle, weight and a part that can seize, for an adjustment you will never use. A fixed mount does the same job with nothing to move. Best Storage Bins

Do not buy a mount rated below your trailer. The rating that matters is the lowest rating in the whole setup: mount, ball, receiver and truck. A mount rated below the loaded trailer weight is unsafe at any height. Best Tool Storage

Do not buy a weight distribution hitch for a light trailer. Spring bars and sway control are heavy hardware for a trailer that does not squat the truck. A fixed ball mount tows a light trailer better, for less. Best Tow Ropes Under 100

Do not buy a mount without measuring the drop. A mount that is 2 inches off level makes the trailer tow badly and wear tyres unevenly. Measure the coupler height with the trailer level before you order. Battery Tender Junior vs NOCO Genius1

Final verdict

Best Overall: CURT TruTrack 2P Check Price — the alternative that actually improves towing.

Best Sway Control: Blue Ox SwayPro Check Price — the sway control pick in this guide.

Best Multi-Ball: Reese Tri-Ball Check Price — the multi-ball alternative that ends ball swapping.

Best Fixed Ball Mount: CURT 45030 Check Price — the simplest fixed mount in this guide.

Best Starter Kit: Reese 21536 Starter Kit Check Price — the cheapest honest way to start towing.

FAQ

What is the best alternative to an adjustable hitch mount?

The best alternative depends on your trailer. A fixed ball mount is best for one trailer at one height, a tri-ball mount is best for several trailers with different couplers, and a weight distribution hitch with sway control is best for a heavy trailer that squats the truck or sways. Each one does its job with nothing to adjust, which is the point.

Why do adjustable hitch mounts rattle?

Adjustable mounts rattle because the sliding shank has clearance in the channel so it can move, and that clearance becomes play once the mount is loaded. A fixed mount has no sliding parts, so there is nothing to rattle. An anti-rattle device can quiet an adjustable mount, but a fixed mount removes the cause entirely.

Do I need a weight distribution hitch?

You need one when the trailer tongue weight squats the truck rear and lifts the front, which lightens the steering. If the truck sits level with the trailer hitched, a fixed ball mount is enough. If the rear sags and the headlights point up, weight distribution spreads the load across both axles and restores steering.

What ball size do I need for my trailer?

Check the stamping on the trailer coupler, which lists the ball size it takes. The three common sizes are 1-7/8 inch, 2 inch and 2-5/16 inch. A ball that is too small can jump out of the coupler, and a ball that is too big will not seat. A tri-ball mount covers all three sizes on one shank.

Can a fixed ball mount tow a heavy trailer?

Yes, if its rating covers the loaded trailer weight. The CURT 45030 in this guide is rated for 7,500 lb, and the Reese tri-ball reaches 10,000 lb on its largest ball. The rating that matters is the lowest rating in the whole setup, including the ball, the receiver and the truck itself.

Is a tri-ball mount as strong as a single ball mount?

Yes, when the ball in use is rated for the trailer. The Reese tri-ball lists 2,000 lb on the 1-7/8 inch ball, 6,000 lb on the 2 inch ball and 10,000 lb on the 2-5/16 inch ball. Use the ball that matches the coupler and covers the trailer weight, and the mount is as strong as a single-ball mount of the same rating.

What is sway control on a hitch?

Sway control resists the trailer moving sideways behind the truck, in crosswinds or when large vehicles pass. Weight distribution hitches like the CURT TruTrack and the Blue Ox SwayPro build it into the hitch through their spring bars. A separate friction sway bar does the same job as an add-on, but the built-in type needs no extra fitting.

How do I measure the drop I need?

Park the trailer level and measure from the ground to the inside top of the coupler. Then measure from the ground to the inside top of the truck receiver with the truck loaded as you tow it. The difference between the two is the drop you need. A fixed mount with that drop keeps the trailer level.

Should I keep my adjustable mount as a spare?

It can serve as a spare if it still slides and locks cleanly, but a seized or rattling adjustable mount is not a spare worth keeping. The Reese starter kit in this guide costs less than most adjustable mounts and works as a complete spare with ball, pin and clip included.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

CURT 17601 TruTrack 2P Weight Distribution Hitch with Sway Control, 10K

Leave a Comment