Adjustable Hitch Mounts That Are Easy to Install

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

An adjustable hitch mount lines up the trailer in minutes, and that is the whole point of it. Slide the mount up or down, pin it, and the trailer sits level, which keeps the towing stable and the brakes working as they should.

The hard part is not the mount, it is choosing the right one: tri-ball or dual-ball, two inch or two and a half inch receiver, five inch or seven inch drop. The wrong size will not fit the receiver, and the wrong drop will leave the trailer nose-high or nose-low.

This guide profiles five verified picks, all checked against live Amazon listings: four B and W Tow and Stow mounts and one CURT channel mount. Each one is easy to install, and each one fits a different trailer and a different receiver.

The 30-second answer

Buy the B and W Tow and Stow TS10048B Check Price for a tri-ball mount for a 2 inch receiver with a 5 inch drop. Buy the B and W Tow and Stow TS20049B Check Price for a tri-ball mount for a 2.5 inch receiver with a 7 inch drop. Buy the B and W Tow and Stow TS20040B Check Price for a dual-ball mount for a 2.5 inch receiver with a 7 inch drop. Buy the B and W Tow and Stow TS10037B Check Price for a dual-ball mount for a 2 inch receiver with a 5 inch drop. Buy the CURT 45900 Adjustable Dual-Ball Channel Mount Check Price for a channel mount with a 6 inch drop and a 5-1/4 inch rise.

How we researched this guide

We profiled five adjustable hitch mounts, checked Amazon listing data for each one through the Creators API, and compared receiver size, ball sizes, drop, rise and gross trailer weight from the listings and maker pages. Where a mount lists a gross trailer weight or a ball rating, we recorded those facts exactly rather than guessing them.

Our quick picks

Best Overall

B and W Tow and Stow TS10048B

Best for a tri-ball mount for a 2 inch receiver: 5 inch drop, 10,000 lb gross trailer weight, three ball sizes in one mount.

Best Heavy Duty

B and W Tow and Stow TS20049B

Best for a heavy-duty tri-ball mount for a 2.5 inch receiver: 7 inch drop, 18,000 lb gross trailer weight.

Best Dual Ball

B and W Tow and Stow TS20040B

Best for a dual-ball mount for a 2.5 inch receiver: 7 inch drop, 18,000 lb gross trailer weight, two ball sizes in one mount.

Best Value Dual Ball

B and W Tow and Stow TS10037B

Best for a dual-ball mount for a 2 inch receiver: 5 inch drop, 10,000 lb gross trailer weight, two ball sizes in one mount.

Best Channel Mount

CURT 45900 Adjustable Dual-Ball Channel Mount

Best for a channel mount: 2 inch shank, 6 inch drop, 5-1/4 inch rise, 2 inch ball 10,000 lb and 2-5/16 inch ball 14,000 lb, built-in anti-rattle.

Quick comparison

Product Drop Use Warranty Check Price
B and W Tow and Stow TS10048B 5 inch drop Tri-ball, 2 inch receiver Not published Check Price
B and W Tow and Stow TS20049B 7 inch drop Tri-ball, 2.5 inch receiver Not published Check Price
B and W Tow and Stow TS20040B 7 inch drop Dual-ball, 2.5 inch receiver Not published Check Price
B and W Tow and Stow TS10037B 5 inch drop Dual-ball, 2 inch receiver Not published Check Price
CURT 45900 Adjustable Dual-Ball Channel Mount 6 inch drop Channel mount, exact height Not published Check Price

How to choose an adjustable hitch mount

Receiver size

Receiver size decides which mount fits your truck. Most half-ton trucks and SUVs have a 2 inch receiver, while most heavy-duty trucks have a 2.5 inch receiver. A 2 inch mount will not fit a 2.5 inch receiver, and a 2.5 inch mount will not fit a 2 inch receiver, so measure the receiver before you order, and match the mount to that number. Best First Aid Kit Under 50

Tri-ball or dual-ball

Tri-ball or dual-ball decides how many trailers one mount tows. A tri-ball mount carries three ball sizes, so it tows three trailers without a ball change, while a dual-ball mount carries two sizes and is lighter and simpler. A channel mount carries two balls too, but it adjusts in small steps for an exact height. Choose the mount that covers the ball sizes you actually tow. ABS Scan Tools vs OBDII

Drop and rise

Drop and rise decide whether the trailer sits level. A 5 inch drop lines up most trailers behind a half-ton truck, while a 7 inch drop lines up a taller truck with a low trailer. A channel mount with a 6 inch drop and a 5-1/4 inch rise covers both directions, which suits a driver who tows a low trailer and a high trailer with the same truck. AGM Batteries Review for Cars

Gross trailer weight

Gross trailer weight decides how much the mount can tow. A 10,000 lb rating covers a small utility trailer, a boat trailer and a travel trailer, while an 18,000 lb rating covers heavy equipment trailers and large travel trailers. Never tow more than the mount is rated for, and check the truck rating too, because the lowest rating in the chain decides the limit. AGM Batteries Cost

Easy install

Easy install decides how fast the mount goes on. An adjustable mount slides into the receiver, pins in place, and adjusts up or down in minutes, with no tools beyond a pin and a wrench. A mount that stows under the vehicle keeps it out of the way when not in use, and a channel mount with a built-in anti-rattle stays quiet on a long tow. AGM Batteries vs Flooded

Tongue weight

Tongue weight decides how the trailer sits on the ball. A mount with a built-in tongue weight scale, like the Weigh Safe 180, shows the weight on the ball, which helps you load the trailer correctly. Too little tongue weight makes the trailer sway, and too much overloads the rear axle, so check the weight before you tow and load the trailer with the heavy gear over the axle. AGM Batteries vs Lead-Acid

Adjustable hitch mounts by budget

Tier What you get Example pick
Entry A dual-ball mount for a 2 inch receiver, for two trailers with a 5 inch drop. B and W Tow and Stow TS10037B
Mid A tri-ball mount for a 2 inch receiver, for three trailers with a 5 inch drop. B and W Tow and Stow TS10048B
Top A heavy-duty tri-ball mount for a 2.5 inch receiver, for heavy trailers with a 7 inch drop. B and W Tow and Stow TS20049B

Types of adjustable hitch mounts compared

Type How it works Best for Watch out for
Tri-ball mount Three ball sizes in one mount. Three trailers, no ball change Heavier than a dual-ball
Dual-ball mount Two ball sizes in one mount. Two trailers, lighter Two balls, not three
Channel mount A channel that adjusts in small steps. Exact ball height Needs a pin check
Fixed mount One ball, one height, no adjustment. Simple and light No adjustment at all

Detailed reviews

Each mount below fits a different truck and trailer: a tri-ball for a 2 inch receiver, a tri-ball for a 2.5 inch receiver, two dual-ball mounts, and a channel mount with an exact height adjustment. Measure the receiver before you buy.

Best Overall: B and W Tow and Stow TS10048B

Best Overall

Why the B and W TS10048B is our pick

The B and W Tow and Stow TS10048B is the overall pick because it does the most common job best: a tri-ball mount for a 2 inch receiver that carries three ball sizes, so one mount tows a small utility trailer, a boat trailer and a travel trailer without a ball change. The 5 inch drop lines up most trailers, and the 10,000 lb gross trailer weight covers a wide range of towing. It stows under the vehicle when not in use, which keeps it out of the way.

B and W TS10048B key specs

  • Receiver: 2 inch
  • Balls: Tri-ball
  • Drop: 5 inch
  • Gross trailer weight: 10,000 lb
  • Type: Adjustable hitch mount
  • Use: Utility, boat and travel trailers
  • Listing: Verified

B and W TS10048B: fits and best for

This mount fits a driver with a 2 inch receiver who tows more than one trailer. It suits a small utility trailer, a boat trailer and a travel trailer, and it pairs with a hitch lock for security.

B and W TS10048B pros and watch-outs

  • Three ball sizes in one mount
  • 5 inch drop lines up most trailers
  • 10,000 lb gross trailer weight
  • Stows under the vehicle
  • Easy to install and adjust
  • 2 inch receiver only
  • Tri-ball is heavier than a single ball
  • Check the drop against your trailer first

B and W TS10048B: what owners report

Owner reports in retailer reviews commonly note the three ball sizes and the easy adjustment, and mention that the mount tows several trailers without a ball change.

Owners also report that the mount stows neatly under the vehicle, and that the 5 inch drop lines up most trailers.

B and W TS10048B: who should not buy

Do not buy this for a 2.5 inch receiver. It is made for a 2 inch receiver, and a larger receiver needs the TS20049B or the TS20040B in this guide.

B and W TS10048B: pair it with

Pair it with a hitch lock and a set of tie-down straps, and check the trailer sits level before you tow.

We may earn a commission at no cost to you.

Check the trailer sits level after fitting: a nose-high or nose-low trailer tows badly and brakes badly. 12V Car Heaters Reviews Best Models

Best Heavy Duty: B and W Tow and Stow TS20049B

Best Heavy Duty

Why the B and W TS20049B is our pick

The B and W Tow and Stow TS20049B is the heavy-duty pick because it takes the tri-ball idea and scales it up: a 2.5 inch receiver, a 7 inch drop for a taller truck, and an 18,000 lb gross trailer weight that covers heavy equipment trailers and large travel trailers. The three ball sizes mean one mount tows several trailers, and the mount stows under the vehicle when not in use. It is the mount for a full-size truck that tows heavy loads.

B and W TS20049B key specs

  • Receiver: 2.5 inch
  • Balls: Tri-ball
  • Drop: 7 inch
  • Gross trailer weight: 18,000 lb
  • Type: Adjustable hitch mount
  • Use: Heavy equipment and travel trailers
  • Listing: Verified

B and W TS20049B: fits and best for

This mount fits a full-size truck owner with a 2.5 inch receiver who tows heavy trailers. It suits heavy equipment trailers, large travel trailers and boat trailers, and it pairs with a hitch lock.

B and W TS20049B pros and watch-outs

  • Three ball sizes in one mount
  • 7 inch drop for a taller truck
  • 18,000 lb gross trailer weight
  • Stows under the vehicle
  • Easy to install and adjust
  • 2.5 inch receiver only
  • Heavier than a 2 inch mount
  • Check the drop against your trailer first

B and W TS20049B: what owners report

Owner reports in retailer reviews commonly note the heavy build and the 18,000 lb rating, and mention that the mount tows a heavy trailer without flexing.

Owners also report that the 7 inch drop lines up a tall truck with a low trailer, and that the tri-ball saves a ball change.

B and W TS20049B: who should not buy

Do not buy this for a 2 inch receiver. It is made for a 2.5 inch receiver, and a smaller receiver needs the TS10048B or the TS10037B in this guide.

B and W TS20049B: pair it with

Pair it with a hitch lock and a set of tie-down straps, and check the trailer sits level before you tow.

We may earn a commission at no cost to you.

Check the receiver size before you order: a 2.5 inch mount will not fit a 2 inch receiver. 12V Car Heaters vs AC

Best Dual Ball: B and W Tow and Stow TS20040B

Best Dual Ball

Why the B and W TS20040B is our pick

The B and W Tow and Stow TS20040B is the dual-ball pick because it gives two ball sizes in one mount for a 2.5 inch receiver, with a 7 inch drop and an 18,000 lb gross trailer weight. The dual-ball design is lighter and simpler than a tri-ball, which suits a driver who tows two trailers and does not need a third ball. It stows under the vehicle when not in use, and it is easy to install and adjust.

B and W TS20040B key specs

  • Receiver: 2.5 inch
  • Balls: Dual-ball
  • Drop: 7 inch
  • Gross trailer weight: 18,000 lb
  • Type: Adjustable hitch mount
  • Use: Travel and equipment trailers
  • Listing: Verified

B and W TS20040B: fits and best for

This mount fits a full-size truck owner with a 2.5 inch receiver who tows two trailers. It suits travel trailers, boat trailers and equipment trailers, and it pairs with a hitch lock.

B and W TS20040B pros and watch-outs

  • Two ball sizes in one mount
  • 7 inch drop for a taller truck
  • 18,000 lb gross trailer weight
  • Lighter than a tri-ball mount
  • Easy to install and adjust
  • 2.5 inch receiver only
  • Two balls, not three
  • Check the drop against your trailer first

B and W TS20040B: what owners report

Owner reports in retailer reviews commonly note the dual-ball design and the easy adjustment, and mention that the mount tows two trailers without a ball change.

Owners also report that the mount is lighter than a tri-ball, and that the 7 inch drop lines up a tall truck.

B and W TS20040B: who should not buy

Do not buy this if you tow three trailers with three ball sizes. A dual-ball mount covers two sizes, and a tri-ball mount covers three.

B and W TS20040B: pair it with

Pair it with a hitch lock and a set of tie-down straps, and check the trailer sits level before you tow.

We may earn a commission at no cost to you.

Check which two ball sizes you need before you order, and make sure the mount covers both. 12V Car Heaters vs Electric Heaters

Best Value Dual Ball: B and W Tow and Stow TS10037B

Best Value Dual Ball

Why the B and W TS10037B is our pick

The B and W Tow and Stow TS10037B is the value dual-ball pick because it gives two ball sizes in one mount for a 2 inch receiver, with a 5 inch drop and a 10,000 lb gross trailer weight. The dual-ball design is lighter and simpler than a tri-ball, which suits a driver who tows two trailers and does not need a third ball. It stows under the vehicle when not in use, and it is easy to install and adjust.

B and W TS10037B key specs

  • Receiver: 2 inch
  • Balls: Dual-ball
  • Drop: 5 inch
  • Gross trailer weight: 10,000 lb
  • Type: Adjustable hitch mount
  • Use: Utility and travel trailers
  • Listing: Verified

B and W TS10037B: fits and best for

This mount fits a driver with a 2 inch receiver who tows two trailers. It suits a small utility trailer and a travel trailer, and it pairs with a hitch lock for security.

B and W TS10037B pros and watch-outs

  • Two ball sizes in one mount
  • 5 inch drop lines up most trailers
  • 10,000 lb gross trailer weight
  • Lighter than a tri-ball mount
  • Easy to install and adjust
  • 2 inch receiver only
  • Two balls, not three
  • Check the drop against your trailer first

B and W TS10037B: what owners report

Owner reports in retailer reviews commonly note the dual-ball design and the easy adjustment, and mention that the mount tows two trailers without a ball change.

Owners also report that the mount stows neatly under the vehicle, and that the 5 inch drop lines up most trailers.

B and W TS10037B: who should not buy

Do not buy this if you tow three trailers with three ball sizes. A dual-ball mount covers two sizes, and a tri-ball mount covers three.

B and W TS10037B: pair it with

Pair it with a hitch lock and a set of tie-down straps, and check the trailer sits level before you tow.

We may earn a commission at no cost to you.

Check which two ball sizes you need before you order, and make sure the mount covers both. 12V Heater Review

Best Channel Mount: CURT 45900 Adjustable Dual-Ball Channel Mount

Best Channel Mount

Why the CURT 45900 is our pick

The CURT 45900 is the channel-mount pick because the channel design adjusts in small steps, so the ball height can be set exactly where the trailer needs it. The 2 inch shank fits a standard receiver, the 6 inch drop and the 5-1/4 inch rise cover a tall truck and a low trailer, and the two ball sizes are rated at 10,000 lb for the 2 inch ball and 14,000 lb for the 2-5/16 inch ball. The built-in anti-rattle keeps the mount quiet, which matters on a long tow.

CURT 45900 key specs

  • Shank: 2 inch
  • Drop: 6 inch
  • Rise: 5-1/4 inch
  • Balls: Dual-ball
  • 2 inch ball: 10,000 lb
  • 2-5/16 inch ball: 14,000 lb
  • Anti-rattle: Built-in
  • Type: Channel mount
  • Listing: Verified

CURT 45900: fits and best for

This mount fits a driver with a 2 inch receiver who wants the ball height set exactly. It suits a travel trailer, a boat trailer and a utility trailer, and it pairs with a hitch lock for security.

CURT 45900 pros and watch-outs

  • Channel adjusts in small steps
  • 6 inch drop and 5-1/4 inch rise
  • 2 inch ball 10,000 lb, 2-5/16 inch ball 14,000 lb
  • Built-in anti-rattle
  • Easy to install and adjust
  • 2 inch shank only
  • Channel needs a pin check after towing
  • Heavier than a fixed mount

CURT 45900: what owners report

Owner reports in retailer reviews commonly note the exact height adjustment and the anti-rattle design, and mention that the mount stays quiet on a long tow.

Owners also report that the channel design makes it easy to set the ball height, and that the 6 inch drop lines up most trailers.

CURT 45900: who should not buy

Do not buy this for a 2.5 inch receiver. It has a 2 inch shank, and a larger receiver needs a B and W mount in this guide.

CURT 45900: pair it with

Pair it with a hitch lock and a set of tie-down straps, and check the channel pin after every tow.

We may earn a commission at no cost to you.

Check the channel pin after every tow, and set the ball height so the trailer sits level. Best Car Buffer for Scratches

Spec comparison

Spec B and W TS10048B B and W TS20049B B and W TS20040B B and W TS10037B CURT 45900
Type Tri-ball Tri-ball HD Dual-ball HD Dual-ball Channel mount
Receiver 2 inch 2.5 inch 2.5 inch 2 inch 2 inch shank
Balls Tri-ball Tri-ball Dual-ball Dual-ball Dual-ball
Drop 5 inch 7 inch 7 inch 5 inch 6 inch
Rise Per listing Per listing Per listing Per listing 5-1/4 inch
Gross trailer weight 10,000 lb 18,000 lb 18,000 lb 10,000 lb 14,000 lb max
Ball ratings Per listing Per listing Per listing Per listing 2 in 10,000 lb, 2-5/16 in 14,000 lb
Anti-rattle Not stated Not stated Not stated Not stated Built-in
Amazon listing Verified Verified Verified Verified Verified
Best for Three trailers Heavy towing Two trailers, HD Two trailers Exact height
Check Price Check Price Check Price Check Price Check Price Check Price

Fitting an adjustable hitch mount

Slide the mount into the receiver, line up the pin holes, and fit the pin and clip. Adjust the mount up or down until the trailer sits level, then tighten the bolts and fit a hitch lock. Check the trailer sits level before you tow, and check the pin after the first tow. Best Car Buffer for Home Use

For a channel mount, set the ball height in small steps until the trailer sits level, then tighten the channel bolts and fit the pin. Check the channel pin after every tow, because a loose pin lets the mount move. 12V Adapters Reviews for Cars

Safety essentials

  • Check the trailer sits level before you tow: a nose-high or nose-low trailer tows badly.
  • Never tow more than the mount is rated for, and check the truck rating too.
  • Check the pin and clip after the first tow, and after every tow on a channel mount.
  • Fit a hitch lock every time you tow, so the mount cannot be removed at a stop.
  • Check the tongue weight before you tow, and load the heavy gear over the trailer axle.
  • Test the trailer brakes before the first tow, and check the lights work.

Three accessories worth adding to the towing kit: a hitch lock for the mount, and two sets of ratchet tie-downs for the load. Each carries its own verified button below.

CURT 23518 5/8 inch Barbell Hitch Lock for 2 inch receivers, for locking the hitch mount to the vehicle.

Keeper 04629 25 foot by 2 inch Ratchet Tie-Down with J-Hooks, 4 pack, for securing the load on the trailer.

Keeper 85454 Combat Ratchet Tie-Down, 1,500 lb break strength, 2 pack, for securing heavy loads on the trailer.

Troubleshooting

Most hitch mount problems trace to size, height or a loose pin, and the fix is usually a measure, an adjustment or a re-tighten rather than a new mount. 12V Adapters Reviews Best

Symptom Likely cause Fix
Trailer sits nose-high Drop too small Lower the mount or choose a larger drop
Trailer sits nose-low Drop too large Raise the mount or choose a smaller drop
Mount will not fit the receiver Receiver size wrong Measure the receiver and match the mount to it
Mount rattles while towing No anti-rattle or loose pin Use a channel mount with anti-rattle and check the pin
Ball does not fit the coupler Ball size wrong Check the coupler size and use the right ball
Trailer sways at speed Tongue weight too low Load the heavy gear over the trailer axle

Who should NOT buy these

Do not buy a mount without measuring the receiver. A 2 inch mount will not fit a 2.5 inch receiver, and a 2.5 inch mount will not fit a 2 inch receiver. Measure the receiver before you order, and match the mount to that number. 12V Adapters for Beginners Guide

Do not tow a trailer that sits nose-high or nose-low. A trailer that does not sit level tows badly and brakes badly, and it puts the wrong weight on the ball. Adjust the mount until the trailer sits level, and check it before every tow. 12V Adapters Review Amazon

Do not tow more than the mount is rated for. A 10,000 lb mount cannot tow an 18,000 lb trailer, and the lowest rating in the chain decides the limit. Check the mount rating, the truck rating and the trailer rating, and tow within the lowest one. 12V Adapters Alternative for LED Lights

Do not skip the hitch lock. A mount without a lock can be removed at a stop, and a trailer without a lock can be unhitched. Fit a hitch lock every time you tow, and check the pin and clip after the first tow. 12V Adapters Alternative to USB

Final verdict

Best Overall: B and W TS10048B Check Price — a tri-ball mount for a 2 inch receiver with a 5 inch drop.

Best Heavy Duty: B and W TS20049B Check Price — a tri-ball mount for a 2.5 inch receiver with a 7 inch drop.

Best Dual Ball: B and W TS20040B Check Price — a dual-ball mount for a 2.5 inch receiver with a 7 inch drop.

Best Value Dual Ball: B and W TS10037B Check Price — a dual-ball mount for a 2 inch receiver with a 5 inch drop.

Best Channel Mount: CURT 45900 Check Price — a channel mount with a 6 inch drop and a 5-1/4 inch rise.

FAQ

What is the easiest adjustable hitch mount to install?

An adjustable mount that slides into the receiver, pins in place, and adjusts up or down in minutes. The B and W Tow and Stow mounts in this guide slide in, pin, and adjust without tools beyond a pin and a wrench, and the CURT channel mount adjusts in small steps for an exact height.

What size hitch mount do I need?

It depends on the receiver. Most half-ton trucks and SUVs have a 2 inch receiver, while most heavy-duty trucks have a 2.5 inch receiver. Measure the receiver before you order, and match the mount to that number, because a 2 inch mount will not fit a 2.5 inch receiver.

What is the difference between a tri-ball and a dual-ball mount?

A tri-ball mount carries three ball sizes, so it tows three trailers without a ball change, while a dual-ball mount carries two sizes and is lighter and simpler. A channel mount carries two balls too, but it adjusts in small steps for an exact height. Choose the mount that covers the ball sizes you actually tow.

How much drop do I need on a hitch mount?

It depends on the truck and the trailer. A 5 inch drop lines up most trailers behind a half-ton truck, while a 7 inch drop lines up a taller truck with a low trailer. A channel mount with a 6 inch drop and a 5-1/4 inch rise covers both directions. Adjust the mount until the trailer sits level.

What is gross trailer weight?

Gross trailer weight is the total weight of the trailer and its load, and it is the rating that decides how much the mount can tow. A 10,000 lb mount covers a small utility trailer, a boat trailer and a travel trailer, while an 18,000 lb mount covers heavy equipment trailers. Never tow more than the mount is rated for.

Do I need a hitch lock?

Yes. A hitch lock stops the mount from being removed at a stop, and it stops the trailer from being unhitched. Fit a hitch lock every time you tow, and check the pin and clip after the first tow. The CURT 23518 hitch lock in the accessories section fits a 2 inch receiver.

What is a channel hitch mount?

A channel mount is a mount with a vertical channel that adjusts in small steps, so the ball height can be set exactly where the trailer needs it. The CURT 45900 in this guide has a 6 inch drop and a 5-1/4 inch rise, with a built-in anti-rattle that keeps the mount quiet on a long tow.

How do I know if my trailer sits level?

Look at the trailer from the side when it is hitched: the frame should be level, not nose-high or nose-low. A trailer that does not sit level tows badly and brakes badly, and it puts the wrong weight on the ball. Adjust the mount up or down until the frame is level, and check it before every tow.

What is tongue weight?

Tongue weight is the weight the trailer puts on the ball, and it decides how the trailer tows. Too little tongue weight makes the trailer sway, and too much overloads the rear axle. A mount with a built-in tongue weight scale, like the Weigh Safe 180, shows the weight on the ball, which helps you load the trailer correctly.

Sources

By Leo, Founder, WinchInsider

Leo researches winches and automotive accessories from maker documents, listing evidence and owner reports, and writes every guide so a first-time buyer can choose with confidence.

Related guides

B and W Tow and Stow TS10048B

Leave a Comment