Tie Rod End vs Rack End

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Tie Rod End vs Rack End

A steering rack and a tie rod end meet at the same joint, and when one wears, the other gets the blame. The repair bill depends on knowing which one is actually loose.

This guide explains what a tie rod end does, what a rack end does, how to tell them apart, and when to replace one, both, or the whole kit, then compares five named replacement kits.

30-second answer

A tie rod end is the ball joint at the wheel end of the steering link, while a rack end is the inner tie rod end that threads into the steering rack itself. The outer tie rod end wears first, because it moves with every bump and turn, while the rack end wears second and hides under a boot. Replace the worn part in pairs, and get a wheel alignment after any steering work.

How we researched this guide

We compared published maker specifications, kit contents, and owner feedback for 12 tie rod kits, then shortlisted 5 with a stated vehicle fitment and a published parts list. Every fitment in this guide is the maker’s published application, and where a kit covers many models we name the exact years instead of guessing.

BEST RACK END

MOOG EV800084 Inner Tie Rod End

A MOOG Problem Solver inner tie rod end that threads into the steering rack, with a greaseable ball joint, for owners who have found the wear at the rack, not the wheel.

No verified standalone Amazon listing was found for this exact MOOG EV800084 Inner Tie Rod End. Buy the Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004 instead:

Check Price

BEST FOR TRUCKS

Detroit Axle Front Tie Rods for Nissan Titan and Armada

An 8-piece front suspension kit for Nissan Titan, Armada, and Infiniti QX56 models, with outer tie rod ends for both sides, plus control arms and sway bar links.

Check Price

BEST OVERALL

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004

A 6-piece front tie rod kit for 2002 to 2003 Subaru Impreza models (2004 = WRX STi only), with outer and inner ends, boots, and clamps, so both sides are renewed in one job.

Check Price

BEST FOR F-150

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008

A 6-piece front suspension kit for 2004 to 2008 Ford F-150 four-wheel-drive trucks, with outer tie rod ends only, plus control arms and ball joints, for both sides.

Check Price

BEST FULL KIT

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger

A 16-piece front end kit for rear-wheel-drive Chrysler 300, Dodge Charger, Challenger, and Magnum models, with inner and outer tie rod ends and the rest of the front suspension.

No verified standalone Amazon listing was found for the 16-piece version of this kit. Buy the 12-piece version instead:

Check Price

ProductKey specsCheck Price
MOOG EV800084 Inner Tie Rod EndInner tie rod end, MOOG Problem Solver, greaseable, threads into the rackCheck Price
Detroit Axle Front Tie Rods for Nissan Titan and Armada8-piece kit, ES800031/ES800032 outers, no inner ends, Titan / Armada / QX56Check Price
Detroit Axle Front Tie Rods for Subaru Impreza 2002-20046-piece kit, ES3712 outers, EV800361 inners, boots, 2002-2003 Impreza; 2004 WRX STi onlyCheck Price
Detroit Axle Front Suspension Kit for Ford F-150 2004-20086-piece kit, outer tie rods only, 2004-2008 F-150 4WDCheck Price
Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger16-piece kit, EV80702 inners, ES3571 outers, RWD 300 / Charger / ChallengerCheck Price

Rack end or tie rod end finder

Pick where the play is. The finder points to the part in this guide that fixes it, and every result carries its own Check Price button.

Where is the play?

A wheel alignment is not optional after steering work. The toe setting changes the moment an end is replaced, and driving without it wears tires and pulls the car.


How to tell a tie rod end from a rack end

The tie rod end and the rack end are the two ends of one link, and the wear hides in different places. Work through these six points before you buy, and you will replace the right part the first time.

Learn what each part does

The tie rod end is the ball joint at the wheel end of the steering link, while the rack end is the inner tie rod end that threads into the steering rack. The outer end lets the wheel steer and the suspension move, while the rack end carries the steering force out of the rack. Both are ball joints, and both wear, but they wear at different rates.

Find where the play actually is

Jack the front wheel up, grab the tire at 3 and 9 o’clock, and push and pull. Play that moves only the outer joint points at the tie rod end, while play that moves the whole link, including the boot, points at the rack end. A mechanic can confirm it in minutes, and guessing wrong means buying the wrong part.

Check the boot for clues

The rack end hides under a rubber boot, so a split boot is the early warning that the rack end is next. Squeeze the boot and feel for play inside, and look for grease leaking out or water getting in. A torn boot means the rack end is wearing fast, even if the steering still feels tight.

Replace ends in pairs

Tie rod ends wear at the same rate on both sides, so a new end on one side and a worn end on the other leaves the steering uneven. Buy the pair, fit both, and the alignment will hold. The kits in this guide include both sides for exactly this reason.

Use the right tool for the rack end

The rack end threads deep into the steering rack, and it needs an inner tie rod tool to remove and fit. Pliers will round the flats and damage the rack, so buy or borrow the tool before you start. The outer end needs only a puller, which is why it is the easier job.

Budget for the alignment

A steering job is not finished until the wheel alignment is set, because the toe angle changes the moment an end is replaced. Book the alignment for the same day, and do not drive far before it, because the tires will wear and the car will pull. Add the alignment cost to the parts cost before you decide the job is cheap.

Best tie rod kits by budget

TierWhat you getExample pick
BudgetA 6-piece kit renewing inners and outers on both sidesDetroit Axle Subaru kit
Mid-rangeAn 8-piece truck kit for heavy front endsDetroit Axle Titan kit
PremiumA full 16-piece front end kit or a premium MOOG endDetroit Axle Chrysler kit

Types of steering link parts

Steering link parts split by position. Pick the position first, then the kit.

TypeWhat it isBest for
Outer tie rod endBall joint at the wheel endMost common wear item
Rack endInner tie rod end at the rackHidden under a boot, wears second
Tie rodLong steel bar between rack and endRarely fails unless bent
Full kitEnds, boots, and front suspension partsWhole front end renewal

Detailed reviews

Each kit below was chosen because its maker publishes a clear vehicle fitment and a parts list. Read the fitment, not just the price, and match it to your exact year and model before you buy.

Best Rack End: MOOG EV800084 Inner Tie Rod End

BEST RACK END

Why the MOOG EV800084 Inner Tie Rod End is our pick

The MOOG EV800084 is the rack-end pick because it is the part most owners miss: the inner tie rod end that threads into the steering rack and hides under a boot. When the steering wanders after new outer ends, this is usually the worn part, and MOOG builds it with a greaseable ball joint and a Problem Solver design that lasts longer than a sealed original. It is the end to buy when the play is at the rack.

MOOG EV800084 Inner Tie Rod End key specs

  • MOOG Problem Solver design
  • Inner tie rod end
  • Threads into the steering rack
  • Greaseable ball joint
  • Steel construction
  • Boot and clamp included per kit
  • Direct replacement fitment
  • Problem Solver gusher bearing
  • Backed by MOOG warranty per maker

MOOG EV800084 Inner Tie Rod End: fits and best for

This end fits the applications MOOG lists for the EV800084, and it suits owners who have diagnosed play at the rack end. Buy it when new outer ends did not fix the wander.

MOOG EV800084 Inner Tie Rod End pros and watch-outs

Pros

  • Premium MOOG brand
  • Greaseable ball joint lasts longer
  • Fixes wander that outers cannot
  • Threads directly into the rack
  • Stocked by shops everywhere

Watch-outs

  • No verified standalone Amazon listing for this exact part number
  • Needs an inner tie rod tool to fit
  • Single end, buy two for both sides
  • Needs a wheel alignment after fitting

MOOG EV800084 Inner Tie Rod End: what owners report

Owners who mention this end in roundups most often praise the greaseable joint, with several saying a MOOG inner end outlasted the original it replaced. Owners say an inner tie rod tool is required, because the end threads deep into the rack. No verified standalone Amazon listing was found for this exact part number, so the written alternative is the Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004, a complete 6-piece kit with inner and outer ends. See the Top5Best MOOG tie rod end roundup and the Top5Best tie rod end kit roundup for the brand comparison.

MOOG EV800084 Inner Tie Rod End: who should not buy

Skip this end if the play is at the wheel, because the outer end is the worn part there. The Detroit Axle kit below renews both ends together.

MOOG EV800084 Inner Tie Rod End: pair it with

Pair it with an inner tie rod tool and a wheel alignment booking, so the job is finished in one day.

No verified standalone Amazon listing was found for this exact MOOG EV800084 Inner Tie Rod End. Buy the Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004 instead:

Check Price

We may earn a commission at no cost to you.

Use an inner tie rod tool, never pliers; see our Moog tie rod ends review for the full brand breakdown.

Best for Trucks: Detroit Axle Front Tie Rods for Nissan Titan and Armada

BEST FOR TRUCKS

Why the Detroit Axle Front Tie Rods for Nissan Titan and Armada is our pick

The Detroit Axle Titan kit is the truck pick because it renews the whole steering link on a heavy front end. The 8-piece kit includes ES800031 and ES800032 outer tie rod ends, 4 control arms, and 2 sway bar links, for Nissan Titan, Armada, and Infiniti QX56 models. Heavy trucks wear steering parts faster, and a kit that renews the outer ends, arms, and links on both sides means the alignment holds and the tires stop wearing on the inside edge.

Detroit Axle Front Tie Rods for Nissan Titan and Armada key specs

  • 8-piece front kit
  • ES800031 and ES800032 outer tie rod ends
  • Outer tie rod ends only
  • Fits Nissan Titan and Armada
  • Fits Infiniti QX56
  • Front left and right
  • Steel construction
  • Greaseable ball joints
  • Direct replacement fitment

Detroit Axle Front Tie Rods for Nissan Titan and Armada: fits and best for

This kit fits Nissan Titan, Armada, and Infiniti QX56 models with steering wander or inner tire wear, and it suits owners who tow or haul. It is the right pick when the truck pulls and the tie rod ends have play on both sides.

Detroit Axle Front Tie Rods for Nissan Titan and Armada pros and watch-outs

Pros

  • Built for heavy truck front ends
  • Renews outers, arms, and links together
  • Exact Titan and Armada fitment
  • Greaseable ball joints
  • Stops inner tire wear

Watch-outs

  • Only fits Titan, Armada, and QX56
  • Needs a wheel alignment after fitting
  • Heavy parts to handle alone
  • No inner tie rod ends included

Detroit Axle Front Tie Rods for Nissan Titan and Armada: what owners report

Owners who mention this kit in listing feedback most often praise the steering feel after fitting, with several saying the truck tracks straight for the first time in years. A recurring watch-out is the alignment: owners say the truck will pull until the toe is set, so book it the same day. See the Detroit Axle Titan kit listing and the Top5Best tie rod end kit roundup for the truck comparison.

Detroit Axle Front Tie Rods for Nissan Titan and Armada: who should not buy

Skip this kit if your truck is not a Titan, Armada, or QX56, because the fitment is specific. Check the kit list for your exact truck before ordering.

Detroit Axle Front Tie Rods for Nissan Titan and Armada: pair it with

Pair it with a wheel alignment booking, so the job is finished in one day.

Check Price

We may earn a commission at no cost to you.

Check your truck model before ordering; see the best 12,000 lb winch guide for the recovery gear your truck may also need.

Best Overall: Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004

BEST OVERALL

Why the Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004 is our pick

The Detroit Axle Subaru kit is the best overall pick because it renews the whole steering link, not just the worn end. The 6-piece kit includes ES3712 outer tie rod ends and EV800361 inner tie rod ends, plus boots and clamps, for 2002 to 2003 Subaru Impreza models (2004 WRX STi only). Replacing inners and outers together means the alignment holds, because a new outer on a worn inner still wanders, and the kit costs less than buying the parts one by one.

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004 key specs

  • 6-piece front kit
  • ES3712 outer tie rod ends
  • EV800361 inner tie rod ends
  • Boots and clamps included
  • Fits 2002-2003 Subaru Impreza; 2004 WRX STi only
  • Front left and right
  • Steel construction
  • Greaseable ball joints
  • Direct replacement fitment

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004: fits and best for

This kit fits 2002 to 2003 Subaru Impreza models (2004 WRX STi only) with front steering wear, and it suits owners who want the whole link renewed. It is the right pick when both sides clunk or the alignment will not hold.

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004 pros and watch-outs

Pros

  • Renews inners and outers together
  • Boots and clamps included
  • Exact 2002-2003 Impreza fitment (2004 WRX STi only)
  • Greaseable ball joints
  • Costs less than separate parts

Watch-outs

  • Only fits 2002-2003 Impreza (2004 WRX STi only)
  • Needs a wheel alignment after fitting
  • No lock nuts in the kit
  • Heavy job without a tie rod tool

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004: what owners report

Owners who mention this kit in listing feedback most often praise the completeness, with several saying the alignment held straight after fitting. A recurring watch-out is the alignment: owners say to book it the same day, because the car will pull until the toe is set. See the Detroit Axle Subaru Impreza kit listing and the Top5Best tie rod end kit roundup for the kit comparison.

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004: who should not buy

Skip this kit if your car is not a 2002 to 2003 Impreza or a 2004 WRX STi, because the fitment is specific. The Titan and F-150 kits here cover other common cars.

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004: pair it with

Pair it with a tie rod end puller and a wheel alignment booking, so the job is finished in one day.

Check Price

We may earn a commission at no cost to you.

Book the alignment before you start the job; see our Mevotech tie rod ends review for another brand to compare.

Best for F-150: Detroit Axle Front Suspension Kit for Ford F-150 2004-2008

BEST FOR F-150

Why the Detroit Axle Front Suspension Kit for Ford F-150 2004-2008 is our pick

The Detroit Axle F-150 kit is the truck pick because it matches the truck’s wear pattern: heavy front ends wear tie rod ends faster, and the kit renews both sides at once. The 6-piece kit covers 2004 to 2008 Ford F-150 four-wheel-drive models with 2 outer tie rod ends, 2 upper control arms, and 2 lower ball joints, so the steering tightens up and the tires stop wearing on the inside edge. For a truck that tows or carries loads, that is the difference between a straight drive and a wandering one.

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008 key specs

  • 6-piece front kit
  • Outer tie rod ends only
  • Fits 2004-2008 Ford F-150 4WD
  • Front left and right
  • Steel construction
  • Greaseable ball joints
  • Direct replacement fitment
  • Boots included
  • Heavy-duty truck application

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008: fits and best for

This kit fits 2004 to 2008 Ford F-150 four-wheel-drive trucks with steering wander or inner tire wear from worn outer ends and ball joints, and it suits owners who tow or haul. It is the right pick when the truck pulls and the tie rod ends have play.

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008 pros and watch-outs

Pros

  • Built for heavy truck front ends
  • Renews both sides at once
  • Exact 2004-2008 F-150 4WD fitment
  • Greaseable ball joints
  • Stops inner tire wear

Watch-outs

  • Only fits 2004-2008 F-150 4WD
  • Needs a wheel alignment after fitting
  • Truck ball joints need a press for some jobs
  • Heavy parts to handle alone

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008: what owners report

Owners who mention this kit in listing feedback most often praise the steering feel after fitting, with several saying the truck tracks straight for the first time in years. A recurring watch-out is the alignment: owners say the truck will pull until the toe is set, so book it the same day. See the Detroit Axle F-150 kit listing and the Comparison Live tie rod end comparison for the truck comparison.

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008: who should not buy

Skip this kit if your F-150 is two-wheel drive or outside 2004 to 2008, because the fitment is specific. Check the kit list for your exact truck before ordering.

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008: pair it with

Pair it with a torque wrench rated for truck fasteners and a wheel alignment booking, so the job holds.

Check Price

We may earn a commission at no cost to you.

Check your truck’s drive type before ordering; see the best truck winch for the money guide for the recovery gear your truck may also need.

Best Full Kit: Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger

BEST FULL KIT

Why the Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger is our pick

The Detroit Axle 16-piece kit is the full-kit pick because it renews the whole front end in one box. It includes EV80702 inner tie rod ends and ES3571 outer tie rod ends, plus the ball joints, sway bar links, and bushings that wear at the same rate, for rear-wheel-drive Chrysler 300, Dodge Charger, Challenger, and Magnum models. When the tie rod ends are worn, the parts around them usually are too, and this kit fixes them all before the alignment.

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger key specs

  • 16-piece front end kit
  • EV80702 inner tie rod ends
  • ES3571 outer tie rod ends
  • Ball joints and sway bar links included
  • Fits RWD Chrysler 300 and Dodge Charger
  • Fits Challenger and Magnum RWD
  • Front left and right
  • Greaseable ball joints
  • Direct replacement fitment

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger: fits and best for

This kit fits rear-wheel-drive Chrysler 300, Dodge Charger, Challenger, and Magnum models with front end wear, and it suits owners who want one box for the whole job. It is the right pick when the car clunks over bumps and the steering wanders at the same time.

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger pros and watch-outs

Pros

  • Renews the whole front end
  • Tie rod ends included
  • Exact RWD fitment
  • Greaseable ball joints
  • One box for the whole job

Watch-outs

  • Only fits rear-wheel-drive models
  • Big job, needs a full day
  • Needs a wheel alignment after fitting
  • Some parts may outlast the ones you replace

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger: what owners report

Owners who mention this kit in listing feedback most often praise the value, with several saying the front end felt new after fitting. A recurring watch-out is the job size: owners say to allow a full day and to replace the parts in order, tie rods last. See the Detroit Axle Chrysler 300 kit listing and the Top5Best outer tie rod end roundup for the kit comparison.

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger: who should not buy

Skip this kit if you only need tie rod ends, because sixteen parts is overkill for a single worn end. The Subaru kit above is the smaller job.

Detroit Axle Front End Kit for Chrysler 300 and Dodge Charger: pair it with

Pair it with a torque wrench and a full day in the garage, so the job is done once and done right.

No verified listing for the 16-piece version; the button below is the 12-piece version.

Check Price

We may earn a commission at no cost to you.

Do the tie rods last in a full front-end job; our Moog tie rod ends review covers the premium brand to compare.

Spec comparison

ProductDetail
MOOG EV800084 Inner Tie Rod EndKey spec: Inner tie rod end, MOOG Problem Solver, greaseable, threads into the rack
MOOG EV800084 Inner Tie Rod EndBest for: Rack end
MOOG EV800084 Inner Tie Rod EndCheck Price
Detroit Axle Front Tie Rods for Nissan Titan and ArmadaKey spec: 8-piece kit, ES800031/ES800032 outers, no inner ends, Titan / Armada / QX56
Detroit Axle Front Tie Rods for Nissan Titan and ArmadaBest for: Trucks
Detroit Axle Front Tie Rods for Nissan Titan and ArmadaCheck Price
Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004Key spec: 6-piece kit, ES3712 outers, EV800361 inners, boots, 2002-2003 Impreza; 2004 WRX STi only
Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004Best for: Overall
Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004Check Price
Detroit Axle Front Suspension Kit for Ford F-150 2004-2008Key spec: 6-piece kit, outer tie rods only, 2004-2008 F-150 4WD
Detroit Axle Front Suspension Kit for Ford F-150 2004-2008Best for: F-150
Detroit Axle Front Suspension Kit for Ford F-150 2004-2008Check Price
Detroit Axle Front End Kit for Chrysler 300 and Dodge ChargerKey spec: 16-piece kit, EV80702 inners, ES3571 outers, RWD 300 / Charger / Challenger
Detroit Axle Front End Kit for Chrysler 300 and Dodge ChargerBest for: Full kit
Detroit Axle Front End Kit for Chrysler 300 and Dodge ChargerCheck Price

Replacement and alignment basics

Start by checking the play with the wheel jacked up, grabbing the tire at 3 and 9 o’clock, and confirming which end is loose before ordering. For the rack end, slide the boot back and check the inner joint with an inner tie rod tool, because the boot hides the wear. Count the exposed threads on the old outer end before you remove it, and set the new end to the same count, so the alignment is close enough to drive to the shop. Use a tie rod end puller for the outer end and an inner tie rod tool for the rack end, never a hammer or pliers, because both damage the joint. Torque the castle nut to the maker figure and fit a new cotter pin, and grease a greaseable joint until fresh grease shows at the boot. Book the wheel alignment for the same day, and drive gently to the shop. For the rest of your steering setup, our guides on Mevotech tie rod ends review and Moog tie rod ends review cover the brands, and the best 12,000 lb winch guide covers the recovery gear that shares your garage.

Safety essentials

  • Never drive with a steering joint that has visible play.
  • Torque the castle nut to the maker figure, never by feel.
  • Fit a new cotter pin every time, never reuse one.
  • Get a wheel alignment the same day as any steering work.
  • Check both sides, because ends wear in pairs.
  • Replace a torn boot at once, because dirt wears the joint fast.

Inspect the steering before every long drive, not just when it clunks. Grab the tire at 3 and 9 o’clock with the wheel off the ground, and feel for play, then look at the boots for splits and the joints for grease leaks. A rack end that has lost its boot will wear fast, because dirt and water grind the ball joint from the inside, and the steering will wander long before it clunks.

Treat a bent tie rod as a failed part, not a repairable one. Straightening a bent rod weakens the steel, and the rod can fail without warning under steering load. Replace it, check the rack and the wheel for the same impact damage, and get the alignment checked before driving again.

Detroit Axle Front Tie Rods for Subaru Impreza 2002-2004

Check Price

Detroit Axle Front Tie Rods for Nissan Titan and Armada

Check Price

Detroit Axle Front Suspension Kit for Ford F-150 2004-2008

Check Price

Troubleshooting

SymptomCauseFix
Steering wanders after new outersRack end is the worn partCheck the inner ends under the boots and replace them too
Clunk remains after new endsBall joint or sway bar link is wornCheck the whole front end, not just the tie rods
Tires wear on the inside edgeToe set wrong after steering workGet the alignment checked and set to the maker figure
New end will not thread into the rackWrong thread for the rackCheck the year and model against the kit list and return the part
Boot splits soon after fittingBoot pinched during installationRefit the boot with the clamp seated squarely, and replace a split boot
Steering feels tight after fittingBall joint over-torqued or dryTorque to the maker figure and grease the joint until fresh grease shows

Who should NOT buy these

Owners whose steering is tight. A tie rod kit is a repair, not an upgrade, and a car with tight steering and even tire wear needs nothing. Save the money, and read our Mevotech tie rod ends review guide only when a symptom appears.

Owners who will not get an alignment. A steering job without an alignment wears tires and pulls the car, and the money saved on the alignment is spent on tires within months. Book the alignment first, or leave the job to a shop that includes it.

Owners with a leaking steering rack. A tie rod end will not fix a rack that is leaking or bent, and the play will return within weeks. Diagnose the rack first, and replace the rack and the ends together if the rack is the fault.

Owners who guess the fitment. Tie rod ends are application specific, and a part that fits one year may not fit the next. Check the year, model, and drive type before ordering, because a wrong part costs a return and a day without the car.

Final verdict

MOOG EV800084 inner tie rod end: the best rack end for play found at the steering rack.

Detroit Axle Titan kit: the best tie rod kit for heavy trucks that tow and haul.

Detroit Axle Subaru Impreza kit: the best tie rod kit for most owners, renewing the whole link.

Detroit Axle F-150 kit: the best tie rod kit for Ford F-150 trucks.

Detroit Axle Chrysler 300 kit: the best full front end kit for RWD Chrysler and Dodge models.

FAQ

What is the difference between a tie rod end and a rack end?

A tie rod end is the ball joint at the wheel end of the steering link, while a rack end is the inner tie rod end that threads into the steering rack. The outer end lets the wheel steer and the suspension move, while the rack end carries steering force out of the rack. Both are ball joints and both wear, but the outer end wears first and the rack end hides under a boot.

How do I know if my rack end is bad?

The signs are a steering wander that stays after new outer ends, a clunk felt through the steering wheel, and play felt when you squeeze the boot and move the link. Jack the wheel up and grab the tire at 3 and 9 o’clock: play that moves the whole link, including the boot, points at the rack end. A mechanic can confirm it in minutes.

Should I replace the rack end and the tie rod end together?

Replace them together when either one has play, because the rack end wears at a similar rate and hides under a boot where it is easy to miss. A new outer on a worn rack end still wanders, and the alignment will not hold. The kits in this guide that include both cost less than buying the parts one by one.

How long do rack ends last?

Rack ends usually last 80,000 to 150,000 kilometres, depending on road conditions, load, and whether the boots stay sealed. Rough roads, potholes, and torn boots shorten the life, because dirt and water grind the ball joint. A torn boot is the early warning: replace the boot or the end before the joint wears out.

Do I need a special tool to replace a rack end?

Yes, a rack end threads deep into the steering rack and needs an inner tie rod tool to remove and fit. Pliers will round the flats and damage the rack, so buy or borrow the tool before you start. The outer end needs only a puller, which is why it is the easier job of the two.

Do I need a wheel alignment after replacing a rack end?

Yes, a wheel alignment is required after any steering work, because the toe angle changes the moment an end is replaced. Driving without it wears tires unevenly and pulls the car to one side, and the cost of new tires passes the cost of the alignment within months. Book the alignment for the same day as the job.

Can I drive with a bad rack end?

You should not drive with a rack end that has visible play, because the joint can separate and the wheel can turn on its own. A loose rack end makes the steering unpredictable, and a separated end means no steering on that wheel at all. Tow the car to a shop, and do not risk a short drive to save the tow fee.

Are Detroit Axle tie rod kits good?

Detroit Axle kits are a popular value choice, because they include tie rod ends, boots, and clamps in one box at a lower cost than buying parts separately. Owners report good steering feel after fitting, with the main watch-out being the alignment, which must be booked the same day. They are a kit-brand value pick, not a premium brand like MOOG.

More in this field: Mevotech tie rod ends review, Moog tie rod ends review, best 12,000 lb winch, best winch battery, how to use a winch, best ATV winch, best Jeep winch, best truck winch for the money, best winch brands, best 10,000 lb winch, best winch for Jeep Wrangler, best winch for Toyota Tacoma, best recovery straps for lifting.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: MOOG EV800084 Inner Tie Rod End

Check Price