Coilover vs Suspension Lift

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Coilover vs Suspension Lift

You want your truck taller, and every forum thread gives you the same two answers: coilovers or a suspension lift kit. They sound like the same thing, but they are not, and buying the wrong one costs you ride quality, money, or both.

The short version is this: a coilover replaces your front struts with an adjustable, better-damping unit, while a suspension lift kit raises the whole truck with new struts, control arms, blocks and shocks. One is about ride and tuning, the other is about height and stance. The five kits below split across both sides so you can see the trade-off clearly.

30-second answer

The Bilstein B8 5100 front struts are the best coilover-side pick for most truck owners: adjustable ride height up to 2.75 inches, a monotube design, and a ride that stays composed with added front weight like a winch or bumper. Buy the Rough Country 3.5 inch Bolt-On Lift Kit instead when you want a fixed 3.5 inch lift with new control arms and a level stance, and the Bilstein B8 6112 when you want a full coilover replacement with matched springs and the best ride in this guide.

How we researched this guide

We compared published maker lift heights, damping designs and included parts for 10 coilover and lift kits, then shortlisted 5 with a stated lift height and a clear parts list. Every height in this guide is the maker’s published figure, and where a kit is sold by vehicle application we say so instead of quoting one height for all trucks.

BEST COILOVER VALUE

Bilstein B8 5100 Front Struts Pair

Adjustable-height monotube front struts with up to 2.75 inches of lift, for trucks that need height without losing ride quality.

Check Price

BEST COILOVER RIDE

Bilstein B8 6112 Front Coilover Kit

A full front coilover replacement with a 60 mm monotube body and matched springs, for the best ride quality in this guide.

No verified standalone Amazon listing was found for this exact Bilstein B8 6112 Front Coilover Kit. Buy the Bilstein B8 5100 Front Struts Pair instead:

Check Price

BEST PREMIUM COILOVER

FOX 2.0 Performance Series Coilover

A 2.0 inch body performance coilover with an internal floating piston, for drivers who want FOX damping and rebuildable quality.

No verified standalone Amazon listing was found for this exact FOX 2.0 Performance Series Coilover. Buy the Bilstein B8 5100 Front Struts Pair instead:

Check Price

BEST LIFT KIT

Rough Country 3.5 in Bolt-On Lift Kit Tacoma

A complete 3.5 inch bolt-on lift with M1 loaded struts, rear shocks and upper control arms, for a full lifted stance in one box.

Check Price

BEST 4 IN LIFT

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks

A 4 inch SST lift bundled with FOX 2.0 Performance shocks, for Silverado and Sierra owners who want lift and matched damping together.

No verified standalone Amazon listing was found for this exact ReadyLIFT SST Lift Kit with FOX 2.0 Shocks. Buy the Rough Country 3.5 in Bolt-On Lift Kit Tacoma instead:

Check Price

ProductKey specsCheck Price
Bilstein B8 5100 Front Struts PairB8 5100, adjustable 0 to 2.75 in front lift, monotube, snap-ring height adjustmentCheck Price
Bilstein B8 6112 Front Coilover KitB8 6112, 60 mm monotube coilovers, 0 to 2.75 in adjustable, matched springsCheck Price
FOX 2.0 Performance Series CoiloverFOX 2.0 Performance Series, 2.0 in body, internal floating piston, application-specificCheck Price
Rough Country 3.5 in Bolt-On Lift Kit Tacoma3.5 in lift, M1 loaded struts, M1 rear shocks, upper control arms, Tacoma 2005-2023 4WDCheck Price
ReadyLIFT SST Lift Kit with FOX 2.0 Shocks4 in front, 3 in rear, SST lift, FOX 2.0 shocks front and rear, Silverado and Sierra 1500 4WD, 2019-2022, excludes Trail Boss and AT4Check Price

Coilover or lift kit picker

Pick your truck, your height goal and how you drive. The calculator matches a coilover or a lift kit to that job.

Your truck, height goal and driving

Height is only half the job: budget for an alignment, check your tyre clearance, and remember that a lift changes steering and driveline angles, so fitment matters more than the number on the box.


How to choose between a coilover and a suspension lift

A coilover and a suspension lift solve different problems, and the right choice follows from what you actually want: ride, height, or both. Work through these six points before you buy, and the kit you pick will be the one your truck and your driving agree with.

Decide whether you want ride or height

A coilover is about ride and tuning: it replaces the strut with a better damper and gives you adjustable height, usually up to about 2.75 inches. A suspension lift is about height and stance: it raises the whole truck, usually 3.5 to 4 inches, with new control arms and shocks. If your complaint is the ride, buy a coilover. If your complaint is the stance and the tyre clearance, buy a lift kit.

Check the lift height honestly

Coilovers top out around 2.75 inches, and that is a real ceiling, not a starting point. Lift kits give a fixed 3.5 or 4 inches, and that height is what you get, no adjustment. Do not buy a coilover hoping for 3.5 inches, and do not buy a lift kit hoping to tune it down. Match the number to the tyres you want to fit and the stance you want to see.

Count what is in the box

A coilover replaces the front struts, sometimes with springs, and the rear is separate. A lift kit is a system: struts, shocks, control arms, blocks or leaf springs, and hardware. The lift kit costs more because it includes more, and it also needs more install time. If the box does not include control arms at 3.5 inches of lift, your front geometry will suffer, so favour kits that do.

Think about added weight

A winch, a steel bumper and a rooftop tent all add front weight, and stock suspension sags under it. Coilovers like the Bilstein 6112 are built for that, with matched springs and damping tuned for the load. A lift kit with loaded struts handles it too, but a spacer lift does not. If you carry front weight, buy damping, not spacers.

Budget for the alignment and the tyres

Every suspension change needs an alignment, and a lift usually needs bigger tyres to look right and to use the clearance. Those two costs sit on top of the kit, and a 4 inch lift can also need steering correction and a carrier-bearing drop. Price the whole job, not just the box, before you commit.

Check fitment twice

Lift kits are application-specific in a way coilovers are not always: a Tacoma kit does not fit a Silverado, a 4WD kit does not fit a 2WD truck, and many kits exclude 5-lug models and special trims like the Trail Boss. Run the listing fitment checker against your exact year, make, model and drivetrain, and read the exclusions before you order.

Best by budget

TierWhat you getExample pick
BudgetAdjustable front struts that level the truck and improve dampingBilstein B8 5100 Front Struts
Mid-rangeA complete fixed lift kit with control arms in the boxRough Country 3.5 in Lift Kit
PremiumA full coilover replacement or a lift bundled with FOX shocksBilstein B8 6112 or ReadyLIFT SST

Types of lift by job

Lift options split by what they replace and how much height they give. Pick the type first, then the kit.

TypeWhat it isBest for
Adjustable coilover strutReplaces the front strut, adjustable heightLevelling and better ride
Full coilover replacementNew coilover with matched springsBest ride with added front weight
Fixed suspension lift kitNew struts, control arms and rear liftTall stance and bigger tyres
Lift with matched shocksLift plus dampers engineered for itOff-road use at full lift height
Spacer and block liftSpacers on factory strutsLooks only, not recommended here

Detailed reviews

Each kit below was chosen because its maker publishes a clear lift height and a clear parts list. The first three are the coilover side of the comparison, the last two are the suspension lift side, and the calculator above covers both.

Best Coilover Value: Bilstein B8 5100 Front Struts Pair

BEST COILOVER VALUE

Why the Bilstein B8 5100 Front Struts Pair is our pick

The Bilstein B8 5100 is the coilover-side pick most truck owners end up buying, and the reason is the balance it strikes. It replaces the factory front struts with a monotube unit whose snap-ring spring seat gives adjustable height, up to 2.75 inches depending on application, so you can level the truck or fit bigger tyres without a full lift kit. It uses your factory springs, it damps better than the stock strut, and it handles added front weight like a winch or a steel bumper without sagging. For a truck that works as well as it plays, this is the smart money.

Bilstein B8 5100 Front Struts Pair key specs

  • Bilstein B8 5100 ride height adjustable
  • Part number 24-187367 for Ram 1500 4WD
  • Adjustable lift 0 to 2.75 in front
  • Monotube design with digressive valving
  • Uses factory coil springs
  • Snap-ring grooved body for height settings
  • For trucks with added front weight
  • Check your application before ordering
  • Alignment required after fitting

Bilstein B8 5100 Front Struts Pair: fits and best for

This kit fits truck owners who want adjustable front height and better damping without a full lift, especially Rams and similar full-size trucks carrying a winch or heavy bumper.

Bilstein B8 5100 Front Struts Pair pros and watch-outs

Pros

  • Adjustable height, no spacers needed
  • Monotube damping, better than stock
  • Handles added front weight well
  • Uses factory springs
  • Proven across many truck applications

Watch-outs

  • Front only, rear lift is separate
  • Height depends on application
  • Needs an alignment after fitting
  • Not a full 3.5 inch lift

Bilstein B8 5100 Front Struts Pair: what owners report

Owners who mention these struts in listing feedback most often praise the level stance and the firmer, more controlled ride over stock. See the Bilstein B8 5100 listing and the RoofTopTentLab lift kit guide for the coilover discussion.

Bilstein B8 5100 Front Struts Pair: who should not buy

Skip these struts if you want a fixed 3.5 inch lift with new control arms, because adjustable struts top out well below that. A full lift kit is the better buy there.

Bilstein B8 5100 Front Struts Pair: pair it with

Pair them with a rear lift block or add-a-leaf and an alignment so the truck sits level and drives straight.

Check Price

We may earn a commission at no cost to you.

Get an alignment the same day you fit new struts, since height changes move the geometry. See our guide on best suspension lift kit for more on this.

Best Coilover Ride: Bilstein B8 6112 Front Coilover Kit

BEST COILOVER RIDE

Why the Bilstein B8 6112 Front Coilover Kit is our pick

The B8 6112 is Bilstein’s step up from the 5100, and the difference is the whole unit: a large 60 mm monotube body with more oil capacity, a digressive piston for consistent damping, and matched springs instead of your factory coils. The adjustable spring seat gives 0 to 2.75 inches of lift depending on application, and the ride is the best in this guide, composed over rough ground and steady with a winch or bumper up front. If ride quality matters as much as height, and you are willing to pay for it, this is the coilover to buy.

Bilstein B8 6112 Front Coilover Kit key specs

  • Bilstein B8 6112 front coilover kit
  • 60 mm monotube body, digressive piston
  • Adjustable lift 0 to 2.75 in front
  • Matched springs included
  • More oil capacity, better cooling
  • For Tacoma, GX470 and similar applications
  • Check your application before ordering
  • Alignment required after fitting
  • Limited lifetime warranty per maker

Bilstein B8 6112 Front Coilover Kit: fits and best for

This kit fits Tacoma and similar midsize truck owners who care how the truck rides after the lift and want height that is adjustable rather than fixed.

Bilstein B8 6112 Front Coilover Kit pros and watch-outs

Pros

  • Best ride quality in this guide
  • Full coilover replacement, not a spacer
  • 60 mm body resists fade
  • Matched springs included
  • Adjustable height

Watch-outs

  • No verified standalone Amazon listing for the exact kit
  • Costs more than the 5100 struts
  • Front only, rear is separate
  • Application-specific, check first

Bilstein B8 6112 Front Coilover Kit: what owners report

Owners who mention this kit in owner forums most often praise the ride over rough roads and the way it handles added front weight. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Bilstein B8 5100 Front Struts Pair, the adjustable strut from the same maker. See the Cerch Garage Tacoma lift kit guide for the 6112 details.

Bilstein B8 6112 Front Coilover Kit: who should not buy

Skip this kit if you want a fixed tall lift, because 2.75 inches is its ceiling. A full suspension lift kit is the better buy for a 3.5 inch stance.

Bilstein B8 6112 Front Coilover Kit: pair it with

Pair it with matching rear 5100 shocks and an alignment so the whole truck rides as one system.

No verified standalone Amazon listing was found for this exact Bilstein B8 6112 Front Coilover Kit. Buy the Bilstein B8 5100 Front Struts Pair instead:

Check Price

We may earn a commission at no cost to you.

Budget for rear shocks too, since new front coilovers expose tired rear shocks. See our guide on best winch for toyota tacoma for more on this.

Best Premium Coilover: FOX 2.0 Performance Series Coilover

BEST PREMIUM COILOVER

Why the FOX 2.0 Performance Series Coilover is our pick

FOX is the name most off-roaders reach for when damping matters more than height, and the 2.0 Performance Series is the entry to that world. Its 2.0 inch aluminium body and internal floating piston keep the oil and gas separate, so the damping stays consistent on long rough runs where a twin-tube shock would fade. It is application-specific, rebuildable, and built for trucks that see real off-road use rather than just a taller stance. If your truck works hard off road and you want damping you can service, this is the premium coilover pick.

FOX 2.0 Performance Series Coilover key specs

  • FOX 2.0 Performance Series coilover
  • 2.0 in aluminium body
  • Internal floating piston design
  • Application-specific valving
  • Rebuildable and serviceable
  • For trucks that see real off-road use
  • Check your application before ordering
  • Alignment required after fitting
  • Pair with matching rear shocks

FOX 2.0 Performance Series Coilover: fits and best for

This coilover fits truck owners who off-road regularly and want consistent damping and a rebuildable shock, especially those who have outgrown stock suspension.

FOX 2.0 Performance Series Coilover pros and watch-outs

Pros

  • Consistent damping on rough runs
  • Rebuildable, long service life
  • Strong off-road reputation
  • Application-specific valving
  • Aluminium body resists corrosion

Watch-outs

  • No verified standalone Amazon listing for the exact coilover
  • Premium outlay
  • Application-specific, check first
  • Needs matching rear shocks for best results

FOX 2.0 Performance Series Coilover: what owners report

Owners who mention FOX 2.0 coilovers in owner forums most often praise the controlled ride over washboard and the way the damping holds up on long dirt runs. No verified standalone Amazon listing was found for this exact coilover, so the written alternative is the Bilstein B8 5100 Front Struts Pair, an adjustable monotube strut. See the Rigs Rated lift kit comparison for the FOX 2.0 discussion.

FOX 2.0 Performance Series Coilover: who should not buy

Skip this coilover if your truck never leaves pavement, because the off-road damping is wasted on the street. A 5100 strut does the same levelling job for less.

FOX 2.0 Performance Series Coilover: pair it with

Pair it with FOX 2.0 rear shocks so the front and rear damping match.

No verified standalone Amazon listing was found for this exact FOX 2.0 Performance Series Coilover. Buy the Bilstein B8 5100 Front Struts Pair instead:

Check Price

We may earn a commission at no cost to you.

Match front and rear shocks by brand and series, since mixed damping feels uneven. See our guide on best off road winch for more on this.

Best Lift Kit: Rough Country 3.5 in Bolt-On Lift Kit Tacoma

BEST LIFT KIT

Why the Rough Country 3.5 in Bolt-On Lift Kit Tacoma is our pick

The Rough Country 3.5 inch kit is the lift-kit side of this comparison in one box: lifted M1 loaded struts up front, M1 rear shocks, aluminium upper control arms, lifted leaf springs and all the hardware, for a fixed 3.5 inch lift that levels the Tacoma and clears bigger tyres. It is a bolt-on kit with minor cutting noted on the listing, and it includes the control arms you need to keep the front geometry right at this height. If you want the tall stance and you want it complete, this is the kit to buy.

Rough Country 3.5 in Bolt-On Lift Kit Tacoma key specs

  • Rough Country 3.5 in Series II bolt-on lift
  • Part number 74241 with M1 struts
  • 3.5 in front lift, rear to match
  • M1 loaded struts and M1 rear shocks
  • Aluminium upper control arms included
  • Lifted leaf springs and hardware included
  • Fits Tacoma 4WD 2005-2023, not 5-lug
  • Minor cutting required per listing
  • Alignment required after fitting

Rough Country 3.5 in Bolt-On Lift Kit Tacoma: fits and best for

This kit fits Tacoma 4WD owners who want a complete fixed 3.5 inch lift with control arms in the box, especially rigs getting bigger tyres and a level stance.

Rough Country 3.5 in Bolt-On Lift Kit Tacoma pros and watch-outs

Pros

  • Complete kit in one box
  • Fixed 3.5 in lift, level stance
  • Upper control arms included
  • M1 struts and shocks matched
  • Lifetime replacement warranty on kit parts per maker

Watch-outs

  • Minor cutting required
  • Does not fit 5-lug or 2WD models
  • Stiffer ride until the struts break in
  • Heavy install, budget a full day

Rough Country 3.5 in Bolt-On Lift Kit Tacoma: what owners report

Owners who mention this kit in listing feedback most often praise the complete parts list and the aggressive level stance once fitted. See the Rough Country 3.5 in Lift Kit listing and the TrendingCar Tacoma lift kit guide for the kit breakdown.

Rough Country 3.5 in Bolt-On Lift Kit Tacoma: who should not buy

Skip this kit if your Tacoma is 2WD or 5-lug, because it does not fit, and skip it if you want adjustable height, because a fixed lift is fixed.

Rough Country 3.5 in Bolt-On Lift Kit Tacoma: pair it with

Pair it with bigger tyres and a carrier-bearing drop bracket if your truck has a two-piece rear driveshaft.

Check Price

We may earn a commission at no cost to you.

Check the fitment checker on the listing twice, since Tacoma trims vary. See our guide on best winch for ford f 150 for more on this.

Best 4 In Lift: ReadyLIFT SST Lift Kit with FOX 2.0 Shocks

BEST 4 IN LIFT

Why the ReadyLIFT SST Lift Kit with FOX 2.0 Shocks is our pick

The ReadyLIFT SST with FOX 2.0 shocks is the only pick in this guide that pairs a full 4 inch lift with dampers engineered for it. The SST lift gives 4 inches in front and 3 inches in the rear, and the FOX 2.0 Performance shocks front and rear are matched to that height, so the truck rides like a finished build instead of a lift with stock shocks. It is made for 2019-2022 Silverado and Sierra 1500 4WD trucks, except Trail Boss and AT4.

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks key specs

  • ReadyLIFT SST lift kit with FOX 2.0 shocks
  • 4 in front lift, 3 in rear lift
  • FOX 2.0 Performance shocks front and rear
  • For Silverado and Sierra 1500 4WD 2019-2022
  • Excludes Trail Boss and AT4 models
  • Limited lifetime warranty on ReadyLIFT parts per maker
  • 1 year warranty on FOX shocks per maker
  • Alignment required after fitting
  • Check your application before ordering

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks: fits and best for

This kit fits Silverado and Sierra 1500 4WD owners who off-road regularly and want a 4 inch lift with matched FOX damping in one order.

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks pros and watch-outs

Pros

  • Lift and shocks engineered together
  • 4 in lift, tallest in this guide
  • FOX 2.0 damping front and rear
  • Finished ride, not a parts-bin build
  • Strong maker warranties

Watch-outs

  • No verified standalone Amazon listing for the exact kit
  • Excludes Trail Boss and AT4 models
  • Premium outlay
  • Application-specific, check first

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks: what owners report

Owners who mention this kit most often praise the way the truck rides after fitting, with none of the harshness a lift on stock shocks can bring. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Rough Country 3.5 in Bolt-On Lift Kit Tacoma, a complete fixed lift kit. See the Rigs Rated lift kit comparison for the SST and FOX bundle details.

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks: who should not buy

Skip this kit if your truck is a Trail Boss or AT4, because it is excluded, and skip it if you drive a Tacoma, because it is made for GM trucks.

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks: pair it with

Pair it with bigger tyres and a steering correction at 4 inches of lift.

No verified standalone Amazon listing was found for this exact ReadyLIFT SST Lift Kit with FOX 2.0 Shocks. Buy the Rough Country 3.5 in Bolt-On Lift Kit Tacoma instead:

Check Price

We may earn a commission at no cost to you.

At 4 inches of lift, check steering and driveline angles. See our guide on best 12000 lb winch for more on this.

Spec comparison

ProductDetail
Bilstein B8 5100 Front Struts PairKey spec: B8 5100, adjustable 0 to 2.75 in front lift, monotube, snap-ring height adjustment
Bilstein B8 5100 Front Struts PairBest for: Best Coilover Value
Bilstein B8 5100 Front Struts PairCheck Price
Bilstein B8 6112 Front Coilover KitKey spec: B8 6112, 60 mm monotube coilovers, 0 to 2.75 in adjustable, matched springs
Bilstein B8 6112 Front Coilover KitBest for: Best Coilover Ride
Bilstein B8 6112 Front Coilover KitCheck Price
FOX 2.0 Performance Series CoiloverKey spec: FOX 2.0 Performance Series, 2.0 in body, internal floating piston, application-specific
FOX 2.0 Performance Series CoiloverBest for: Best Premium Coilover
FOX 2.0 Performance Series CoiloverCheck Price
Rough Country 3.5 in Bolt-On Lift Kit TacomaKey spec: 3.5 in lift, M1 loaded struts, M1 rear shocks, upper control arms, Tacoma 2005-2023 4WD
Rough Country 3.5 in Bolt-On Lift Kit TacomaBest for: Best Lift Kit
Rough Country 3.5 in Bolt-On Lift Kit TacomaCheck Price
ReadyLIFT SST Lift Kit with FOX 2.0 ShocksKey spec: 4 in front, 3 in rear, SST lift, FOX 2.0 shocks front and rear, Silverado and Sierra 1500 4WD, 2019-2022, excludes Trail Boss and AT4
ReadyLIFT SST Lift Kit with FOX 2.0 ShocksBest for: Best 4 In Lift
ReadyLIFT SST Lift Kit with FOX 2.0 ShocksCheck Price

Installation and setup basics

Fitting suspension parts is a heavy job, and it is worth doing on a lift or with proper jack stands, never on a jack alone. Start by measuring the ride height at all four corners so you can see the change, then remove the wheels, support the suspension, and swap the struts or the lift components one corner at a time. Torque every bolt to the maker figure, fit the control arms and hardware the kit includes, and check the brake lines and ABS wires for slack at full droop. For the wider rig setup, our guides on best winch for toyota tacoma and best suspension lift kit cover the winch and lift sides of a build, because a lifted truck with a winch needs both sides right.

Get an alignment the same day, since any height change moves camber, caster and toe, and a truck that drives straight on the old alignment will pull on the new one. Check tyre clearance at full lock and full compression, check the driveline angles, and retorque the hardware after the first 50 miles. Drive gently for the first miles while the new struts settle, and listen for clunks that point to a loose bolt or a binding joint.

Safety essentials

  • Never work under a vehicle held up only by a jack; use stands.
  • Torque every suspension bolt to the maker figure.
  • Get an alignment the same day you change ride height.
  • Check brake lines and ABS wires for slack at full droop.
  • Retorque all hardware after the first 50 miles.
  • Check tyre clearance at full lock before driving hard.

Suspension work puts you under a heavy vehicle, and that is the most dangerous part of the job. Use jack stands on solid, level ground, chock the wheels that stay on the ground, and never put any part of yourself under a vehicle supported only by a jack. A suspension component under load can move suddenly when a bolt comes out, so keep hands clear of pinch points and wear gloves and eye protection throughout the job.

A lift changes how the truck steers, brakes and handles, and the first drive after fitting is a test drive, not a normal drive. Take it slow, check for pulling, vibration and noise, and stop at once if the steering feels wrong. Check the tyre clearance at full lock in both directions, since a tyre that rubs at full compression can fail without warning. If anything feels off, have a shop check the alignment and the torque before you drive further.

Troubleshooting

SymptomCauseFix
Truck pulls after the liftAlignment out after height changeGet a full alignment and check tyre pressures
Clunk over bumpsLoose bolt or binding jointRetorque all hardware and check the control arm bushings
Tyre rubs at full lockTyres too big for the liftCheck clearance, trim or fit smaller tyres
Ride is harsh after fittingNew struts not broken in, or wrong dampingDrive gently for the first miles, then reassess the damping
Vibration at speedDriveline angle changed by the liftCheck the carrier bearing and driveline angles
Sag returns with front weightSprings too soft for the winch or bumperFit heavier springs or a coilover rated for the load

Who should NOT buy a coilover or a lift kit

Owners who only want the look. A lift bought for looks alone costs you ride, fuel and handling, and a spacer lift is the worst of both worlds. If you do not need the clearance, spend the money on maintenance instead.

Owners who will not get an alignment. Every height change needs an alignment, and skipping it wears tyres and makes the truck unsafe. If you will not budget for one, do not change the suspension. Check the real cost with our best suspension lift kit guide before you buy.

Owners with the wrong application. A Tacoma kit does not fit a Silverado, and a 4WD kit does not fit a 2WD truck. If your exact year, make, model and drivetrain is not listed, do not guess, because the parts will not fit.

Owners who tow at the limit. A lifted truck tows differently, with a higher centre of gravity and changed geometry. If you tow heavy trailers regularly, talk to a shop before lifting, since the lift can reduce your safe towing margin.

Final verdict

Bilstein B8 5100 Front Struts Pair: the best coilover-side pick for most truck owners who want adjustable height and better damping.

Bilstein B8 6112 Front Coilover Kit: the best coilover for ride quality with added front weight.

FOX 2.0 Performance Series Coilover: the best premium coilover for hard off-road use.

Rough Country 3.5 in Bolt-On Lift Kit Tacoma: the best complete lift kit for a fixed 3.5 inch stance.

ReadyLIFT SST Lift Kit with FOX 2.0 Shocks: the best 4 inch lift with matched damping for GM trucks.

FAQ

What is the difference between a coilover and a suspension lift?

A coilover is a single unit that combines a shock absorber and a coil spring, and it replaces your front struts with an adjustable, better-damping unit, usually giving up to about 2.75 inches of lift. A suspension lift kit is a system that raises the whole truck, usually 3.5 to 4 inches, with new struts, control arms, rear shocks or blocks, and hardware. The coilover is about ride and tuning, the lift kit is about height and stance, and many trucks end up with both ideas in one build.

Can coilovers give as much lift as a lift kit?

No. Adjustable coilovers top out around 2.75 inches of front lift, and that is a real ceiling. A suspension lift kit gives a fixed 3.5 or 4 inches, which is the height you need for much bigger tyres and a tall stance. If you want 3.5 inches or more, buy the lift kit. If you want up to 2.75 inches with better damping and adjustable height, buy the coilover. Do not try to stretch a coilover past its designed range.

Do I need new control arms with a lift?

At 3.5 inches of lift and above, yes, in most cases. The factory upper control arms run out of travel and the ball joints sit at a bad angle, which wears them fast and hurts the alignment. Good lift kits include new upper control arms for exactly this reason, and you should favour kits that do. At coilover heights up to 2.75 inches, the factory arms usually cope, but an alignment will tell you for sure.

Will a lift kit ruin my ride?

A good lift kit with matched shocks rides well, and a coilover usually rides better than stock. A bad lift, especially a spacer lift on factory struts, rides harshly and wears parts fast. The difference is the damping: kits that replace the shocks with units valved for the new height ride properly, while kits that only add height do not. Read the parts list before you buy, and budget for matched shocks if the kit does not include them.

How much does it cost to install a lift kit?

Install cost varies by kit and by shop, but a full lift kit is a full day of work, and a coilover swap is half a day. On top of the kit, budget for an alignment, and often for bigger tyres, since a lift without bigger tyres looks unfinished. Some trucks also need a carrier-bearing drop or steering correction at taller heights. Price the whole job, not just the box, before you commit to a kit.

Do coilovers work with a winch and steel bumper?

Yes, and this is one of the best reasons to buy them. A winch and a steel bumper add real front weight, and stock springs sag under it. Coilovers like the Bilstein 6112 are built for that load, with matched springs and damping tuned for the extra weight. A lift kit with loaded struts handles it too. What does not handle it is a spacer lift, which adds height without adding spring rate, so the truck sags anyway.

Will lifting my truck void the warranty?

A lift can affect warranty coverage for suspension and driveline parts, but it does not void the whole warranty. The rule in the United States is that a maker must show the aftermarket part caused the failure before denying a claim on that part. Keep your receipts, use quality parts, and get the alignment done properly, since a well-fitted kit from a known maker is far easier to defend than a cheap spacer kit fitted badly.

Can I install coilovers or a lift kit myself?

A competent home mechanic with jack stands, a spring compressor and torque tools can fit coilovers, but a full lift kit is a bigger job with more parts and more chances to get the geometry wrong. Coil springs store serious energy, so a spring compressor is not optional, and every bolt must be torqued to the maker figure. If you are unsure, pay a shop: the alignment alone is a shop job, and a bad install costs more to fix than a good install costs to do.

More in this field: best atv winch, how to use a winch, what size winch do i need, best winch battery, best winch for jeep wrangler, best recovery straps for lifting, best snatch blocks to prevent falls, best d ring shackles for recovery, best soft shackles for small vehicles, best heavy duty winch extension straps quick connect, best portable winch, best off road winch.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Bilstein B8 5100 Front Struts Pair

Check Price