Coilover Kits Reviewed and Compared

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Coilover Kits Reviewed and Compared

You lower your car on cheap springs and the ride turns harsh, the tyres wear on the inside edge, and the handling gets worse instead of better. A coilover kit is the proper way to lower a car, but only when the kit fits your car and the damping suits the road you drive on.

One honest note first: every coilover kit in this guide fits a specific car, and no kit here is universal. A kit that fits a 2001 Honda Civic does not fit a 2018 Toyota Camry, so this guide names the exact fitment for every pick, compares the damping, the height adjustment, and the ride, and tells you which kit suits a street car, a track car, and a tight budget.

30-second answer

The Rev9 Hyper-Street II for the 2001-05 Honda Civic is the best coilover kit in this guide, because it pairs mono-tube shocks with 32-click rebound adjustment and full-length height adjustment in a kit built for the street. Buy the Rev9 Hyper-Street II for the 2018-21 Toyota Camry instead when you drive a Camry, and the Skunk2 Pro-S II when you want a track-proven kit for a 1996-2000 Civic.

How we researched this guide

We compared published maker specifications, fitments, damping adjustments, and owner feedback for 10 coilover kits, then shortlisted 5 with a named model and a stated fitment. No verified standalone Amazon listing was found for the exact Rev9 Hyper-Street II for the 1990-94 Mitsubishi Eclipse, the maXpeedingrods kit for the 2012-13 Honda Civic, or the Skunk2 Pro-S II for the 1996-2000 Honda Civic, so each of those three carries a written alternative below, and the alternative is named again in the quick-compare table, the spec table, and the calculator. Every figure in this guide is the maker’s published figure, and where a maker does not publish a figure we say so instead of guessing.

BEST OVERALL

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05

A full coilover kit for the 2001-05 Honda Civic with mono-tube shocks, 32-click rebound, and full-length height adjustment.

Check Price

BEST FOR CAMRY

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21

A full coilover kit for the 2018-21 Toyota Camry SE and XSE with mono-tube shocks and 32-click rebound adjustment.

Check Price

BEST FOR ECLIPSE

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94

A full coilover kit for the 1990-94 Mitsubishi Eclipse front-wheel drive with mono-tube shocks and 32-click rebound adjustment.

No verified standalone Amazon listing was found for this exact Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94. Buy the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 instead:

Check Price

BEST VALUE

maXpeedingrods Coilovers, Civic FG/FB 2012-13

A four-corner coilover set for the 2012-13 Honda Civic and 2013-15 Acura ILX, with spanners and a sway bar pair, at a value outlay.

No verified standalone Amazon listing was found for this exact maXpeedingrods Coilovers, Civic FG/FB 2012-13. Buy the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 instead:

Check Price

BEST FOR TRACK

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000

A track-proven coilover kit for the 1996-2000 Honda Civic with a height-adjustable mono-tube design and fixed damping set at the factory.

No verified standalone Amazon listing was found for this exact Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000. Buy the Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21 instead:

Check Price

ProductKey specsCheck Price
Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05Mono-tube shocks, 32-click rebound, full-length adjustable, Honda Civic 2001-05Check Price
Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21Mono-tube shocks, 32-click rebound, full-length adjustable, Toyota Camry SE/XSE 2018-21Check Price
Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94No verified listing; buy the Rev9 R9-HS2-013_2 Civic kit instead. Mono-tube shocks, 32-click rebound, Eclipse FWD 1990-94Check Price
maXpeedingrods Coilovers, Civic FG/FB 2012-13No verified listing; buy the Rev9 R9-HS2-013_2 Civic kit instead. Set of 4, 2 spanners, sway bar pair, Civic 2012-13Check Price
Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000No verified listing; buy the Rev9 R9-HS2-132_1 Camry kit instead. Mono-tube, height-adjustable, fixed damping, Civic 1996-2000Check Price

Coilover kit finder

Pick your car and the job. The finder matches a kit whose fitment and damping suit that car and that road.

Your car and the ride you want

A coilover never fixes worn bushings or bad tyres. Check the suspension and the tyres first, fit the kit, then align the car, because a lowered car with a bad alignment eats tyres fast.


How to choose a coilover kit that fits your car

A coilover kit is a fitment, a damper, and a spring, and all three must suit your car and the road you drive on. Work through these six points before you buy, and the kit you pick will be the one that lowers the car without ruining the ride.

Fitment comes first, always

A coilover kit fits one chassis, and no kit crosses chassis, so check your car’s chassis code, model year, and trim before you look at brands. A kit for a 2001 Civic does not fit a 2012 Civic, and a kit for a Camry SE does not always fit a Camry LE. Buy the kit that names your chassis code, and never order a kit that only names the model, because the model spans chassis that do not share suspension.

Understand the damping adjustment

A coilover with 32 clicks of rebound lets you soften the ride for the street or firm it up for a twisty road, while a kit with fixed damping is set at the factory and cannot be changed. Adjustable damping suits a driver who wants one car for the daily drive and the weekend road, and fixed damping suits a driver who wants the maker to decide the setup. Neither is better, but they suit different drivers.

Mind the spring rates

A spring rate decides how firm the ride is and how the car handles: a soft spring rides well and rolls more, while a firm spring handles well and rides harshly. Most street kits use a moderate rate, and most track kits use a firm rate, so match the rate to the road you drive on most. A kit that does not state its spring rates is a kit you cannot judge, so ask the maker before you buy.

Height adjustment is not ride height

A full-length adjustable coilover changes the height without changing the spring preload, which keeps the ride consistent at any height, while a kit that adjusts by preload changes the ride as it changes the height. Lowering a car changes the alignment, the camber, and the tyre wear, so a kit is only half the job: the alignment after fitting is the other half, and a lowered car with a bad alignment eats tyres.

Mono-tube or twin-tube

A mono-tube shock has one tube with the piston and the gas in the same chamber, which gives a firmer, more consistent ride and better heat handling, while a twin-tube shock has two tubes and a softer ride. Mono-tube suits a firm street or track setup, and twin-tube suits a soft daily ride. Check which type the kit uses, because the type decides the ride more than the brand does.

Plan the install and the alignment

A coilover kit needs a professional install, a spring compressor for the old struts, and a wheel alignment after fitting, so budget for the shop time as well as the kit. Never work under a car held up by a jack alone, never compress a spring without the right tool, and never skip the alignment, because a lowered car with a bad alignment is a car that wears tyres and handles badly.

Best by budget

TierWhat you getExample pick
BudgetA full four-corner kit for the ninth-gen Civic at a value outlaymaXpeedingrods Coilovers
Mid-rangeA mono-tube kit with 32-click rebound for the 2001-05 CivicRev9 Hyper-Street II R9-HS2-013_2
PremiumA track-proven mono-tube kit with fixed damping for the 1996-2000 CivicSkunk2 Pro-S II 541-05-4725

Types of coilover kits by job

Coilover kits split by what they are built to do. Pick the type first, then the brand.

TypeWhat it isBest for
Street coiloverAdjustable rebound, moderate spring rateDaily driving with a lower stance
Track coiloverFixed or firm damping, firm spring rateTrack days and twisty roads
Budget coiloverFull kit at a value outlayA lower stance without a premium price
Full lowering kitHeight adjustable, alignment requiredA complete stance change

Detailed reviews

Each kit below was chosen because its maker publishes a clear fitment and damping story. Read the chassis code and the damping first, not just the brand, and match them to your car before you buy.

Best Overall: Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05

BEST OVERALL

Why the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 is our pick

The Rev9 Hyper-Street II for the 2001-05 Honda Civic is the best coilover kit in this guide because it gets the street setup right: mono-tube shocks with 32 clicks of rebound adjustment, full-length height adjustment, and a lowering kit built for daily driving. The part number is R9-HS2-013_2, and the kit fits Honda Civic coupes and sedans on the EM and ES chassis from 2001 to 2005. The rebound adjustment lets you soften the ride for the street or firm it up for a twisty road, and the full-length adjustment changes the height without changing the spring preload.

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 key specs

  • Part number R9-HS2-013_2
  • Fits Honda Civic Coupe/Sedan (EM/ES) 2001-05
  • Mono-tube shocks per Rev9
  • 32-click rebound adjustment
  • Full-length height adjustment
  • Lowering kit, does not return to factory height
  • No install instructions included
  • Professional install recommended
  • Alignment required after fitting

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05: fits and best for

This kit fits Honda Civic coupe and sedan owners on the 2001-05 EM and ES chassis who want a street coilover with adjustable damping and height. It suits a daily driver that wants a lower stance and a firmer ride without a track setup.

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 pros and watch-outs

Pros

  • 32-click rebound tunes the ride
  • Full-length height adjustment
  • Mono-tube shocks for a firm ride
  • Built for the street, not just the track
  • Fits the Civic EM and ES chassis

Watch-outs

  • No install instructions included
  • Does not return to factory ride height
  • Professional install recommended
  • Fits only the 2001-05 Civic

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05: what owners report

Owners who mention this kit in roundups most often praise the rebound adjustment, which lets a street car ride soft on the daily drive and firm on a twisty road. A recurring watch-out is the install: owners warn there are no instructions in the box, so a shop should fit it. See the Rev9 Hyper-Street II R9-HS2-013_2 listing and the ModManual Rev9 coilovers for Civic for the adjustment guidance.

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05: who should not buy

Skip this kit if your Civic is not a 2001-05 EM or ES chassis, because coilovers do not cross chassis. Check your chassis code first, then buy the kit that fits it.

Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05: pair it with

Pair it with a wheel alignment and a fresh set of tyres, so the lower stance does not wear the tyres on the inside edge.

Check Price

We may earn a commission at no cost to you.

Get the alignment done the same week you fit the kit, because a lowered car with a bad alignment eats tyres fast. See our guide on coilover kits review for cars for more on this.

Best for Camry: Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21

BEST FOR CAMRY

Why the Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21 is our pick

The Rev9 Hyper-Street II for the 2018-21 Toyota Camry is the kit for a Camry owner who wants a lower stance without a harsh ride. The part number is R9-HS2-132_1, and the kit fits Camry SE and XSE models on the XV70 chassis from 2018 to 2021. The mono-tube shocks carry the same 32-click rebound adjustment as the Civic kit, so the ride can be softened for the daily drive or firmed up for a twisty road, and the full-length height adjustment changes the stance without changing the spring preload.

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21 key specs

  • Part number R9-HS2-132_1
  • Fits Toyota Camry SE/XSE (XV70) 2018-21
  • Mono-tube shocks per Rev9
  • 32-click rebound adjustment
  • Full-length height adjustment
  • Lowering kit, does not return to factory height
  • No install instructions included
  • Professional install recommended
  • Alignment required after fitting

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21: fits and best for

This kit fits Toyota Camry SE and XSE owners on the 2018-21 XV70 chassis who want a lower stance and an adjustable ride. It suits a daily driver that wants a firmer feel without a track setup.

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21 pros and watch-outs

Pros

  • 32-click rebound tunes the ride
  • Full-length height adjustment
  • Mono-tube shocks for a firm ride
  • Built for the Camry XV70 chassis
  • Adjustable for street or twisty roads

Watch-outs

  • No install instructions included
  • Does not return to factory ride height
  • Professional install recommended
  • Fits only the 2018-21 Camry SE and XSE

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21: what owners report

Owners who mention this kit in listing feedback most often praise the stance and the way the rebound adjustment softens the daily drive. A recurring watch-out is the same as the Civic kit: no instructions in the box, so a shop should fit it. See the Rev9 Hyper-Street II R9-HS2-132_1 listing and the Car and Truck best coilovers for the kit comparison.

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21: who should not buy

Skip this kit if your Camry is not a 2018-21 SE or XSE on the XV70 chassis, because coilovers do not cross chassis or trims. Check your chassis code and trim first, then buy the kit that fits it.

Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21: pair it with

Pair it with a wheel alignment and a fresh set of tyres, so the lower stance does not wear the tyres on the inside edge.

Check Price

We may earn a commission at no cost to you.

Set the rebound soft for the first week, then firm it up a click at a time until the ride feels right. See our guide on coilover kits vs lift kit for more on this.

Best for Eclipse: Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94

BEST FOR ECLIPSE

Why the Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94 is our pick

The Rev9 Hyper-Street II for the 1990-94 Mitsubishi Eclipse is the kit for an Eclipse owner who wants a period-correct lowering kit with modern adjustment. The part number is R9-HS2-018_1, and the kit fits Eclipse front-wheel-drive models on the D2 chassis from 1990 to 1994. The mono-tube shocks carry 32 clicks of rebound adjustment, and the full-length height adjustment changes the stance without changing the spring preload, which suits an older car that needs a careful setup.

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94 key specs

  • Part number R9-HS2-018_1
  • Fits Mitsubishi Eclipse FWD (D2) 1990-94
  • Mono-tube shocks per Rev9
  • 32-click rebound adjustment
  • Full-length height adjustment
  • Lowering kit, does not return to factory height
  • No install instructions included
  • Professional install recommended
  • Alignment required after fitting

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94: fits and best for

This kit fits Mitsubishi Eclipse front-wheel-drive owners on the 1990-94 D2 chassis who want a lowering kit with adjustable damping. It suits a classic Eclipse that wants a lower stance and a firmer ride.

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94 pros and watch-outs

Pros

  • 32-click rebound tunes the ride
  • Full-length height adjustment
  • Mono-tube shocks for a firm ride
  • Built for the Eclipse D2 chassis
  • Period-correct fit for a classic car

Watch-outs

  • No verified standalone Amazon listing
  • No install instructions included
  • Does not return to factory ride height
  • Fits only the 1990-94 Eclipse FWD

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94: what owners report

Owners who mention this kit in roundups most often praise the fitment for a classic chassis that few makers still support. A recurring watch-out is the install: owners warn there are no instructions, so a shop should fit it. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05, the same Hyper-Street II design for the Civic. See the ShiftMaxx best coilovers for the 9th gen Civic for the fitment guidance.

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94: who should not buy

Skip this kit if your Eclipse is not a 1990-94 front-wheel-drive D2 chassis, because coilovers do not cross chassis or drivetrains. Check your chassis code first, then buy the kit that fits it.

Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94: pair it with

Pair it with a wheel alignment and a check of the bushings, because an old Eclipse needs fresh rubber with a new suspension.

No verified standalone Amazon listing was found for this exact Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94. Buy the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 instead:

Check Price

We may earn a commission at no cost to you.

Replace the top mounts and bushings while the suspension is apart, because an old car hides worn rubber. See our guide on coilover suspension vs springs for more on this.

Best Value: maXpeedingrods Coilovers, Civic FG/FB 2012-13

BEST VALUE

Why the maXpeedingrods Coilovers, Civic FG/FB 2012-13 is our pick

The maXpeedingrods coilover set is the value pick because it gives a full four-corner kit for the 2012-13 Honda Civic FG and FB chassis and the 2013-15 Acura ILX: two front and two rear coilovers, two spanners for height adjustment, and a sway bar pair. It suits an owner who wants a lower stance on a ninth-generation Civic without paying for a premium brand, and the set covers the whole car in one buy, which is the value case for a budget kit.

maXpeedingrods Coilovers, Civic FG/FB 2012-13 key specs

  • Fits Honda Civic FG/FB 2012-13
  • Fits Acura ILX 2013-15
  • Set of 4: 2 front, 2 rear
  • Two spanners included
  • Sway bar pair included
  • Height adjustable
  • Budget kit for a ninth-gen Civic
  • Professional install recommended
  • Alignment required after fitting

maXpeedingrods Coilovers, Civic FG/FB 2012-13: fits and best for

This kit fits Honda Civic FG and FB owners from 2012-13 and Acura ILX owners from 2013-15 who want a full lowering kit at a value outlay. It suits a daily driver that wants a lower stance without a premium price.

maXpeedingrods Coilovers, Civic FG/FB 2012-13 pros and watch-outs

Pros

  • Full four-corner kit in one buy
  • Spanners and sway bar pair included
  • Value outlay for a ninth-gen Civic
  • Height adjustable
  • Covers the whole car at once

Watch-outs

  • No verified standalone Amazon listing
  • Budget build, not a premium kit
  • Damping adjustment not stated
  • Fits only the 2012-13 Civic and 2013-15 ILX

maXpeedingrods Coilovers, Civic FG/FB 2012-13: what owners report

Owners who mention this kit in roundups most often praise the value: a full kit for the outlay of two premium corners. A recurring watch-out is the ride: owners warn a budget kit can ride firmer than a premium one, so set the height carefully. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05, a mono-tube kit with 32-click rebound. See the ShiftMaxx best coilovers for the 9th gen Civic for the ninth-gen guidance.

maXpeedingrods Coilovers, Civic FG/FB 2012-13: who should not buy

Skip this kit if your Civic is not a 2012-13 FG or FB chassis, because coilovers do not cross chassis. Check your chassis code first, then buy the kit that fits it.

maXpeedingrods Coilovers, Civic FG/FB 2012-13: pair it with

Pair it with a wheel alignment and a check of the tyres, so the lower stance does not wear the inside edge.

No verified standalone Amazon listing was found for this exact maXpeedingrods Coilovers, Civic FG/FB 2012-13. Buy the Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05 instead:

Check Price

We may earn a commission at no cost to you.

Set the height a little higher than you want at first, then lower it after a week when the springs settle. See our guide on professional coilover kits vs factory suspension for more on this.

Best for Track: Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000

BEST FOR TRACK

Why the Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000 is our pick

The Skunk2 Pro-S II is the track pick because it is built for a driver who wants a set-and-forget setup: a height-adjustable mono-tube design with fixed damping tuned at the factory, so there is no knob to second-guess. The part number is 541-05-4725, and the kit fits all Honda Civic models from 1996 to 2000. The design uses a super-finished hard chrome shaft and a forged shortened shock body, and it is the kit for a Civic that sees track days as well as the street.

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000 key specs

  • Part number 541-05-4725
  • Fits Honda Civic all models 1996-2000
  • Height-adjustable mono-tube design
  • Fixed damping set at the factory
  • No damping knob to adjust
  • Super-finished hard chrome shaft
  • Forged shortened shock body
  • Professional install recommended
  • Alignment required after fitting

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000: fits and best for

This kit fits Honda Civic owners from 1996-2000 who want a track-proven coilover with a set-and-forget setup. It suits a Civic that sees track days and a driver who wants the damping decided by the maker.

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000 pros and watch-outs

Pros

  • Track-proven design
  • Fixed damping, no knob to guess
  • Mono-tube with a hard chrome shaft
  • Height adjustable
  • Forged shortened shock body

Watch-outs

  • No verified standalone Amazon listing
  • Fixed damping cannot be softened
  • Fits only the 1996-2000 Civic
  • Firmer ride than a street kit

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000: what owners report

Owners who mention this kit in roundups most often praise the set-and-forget damping, which suits a driver who wants the maker to decide the setup. A recurring watch-out is the ride: the fixed damping is firm, so a soft daily ride is not what this kit does. No verified standalone Amazon listing was found for this exact kit, so the written alternative is the Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21, a mono-tube kit with 32-click rebound. See the Car and Truck best coilovers for the track-kit discussion.

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000: who should not buy

Skip this kit if you want a soft daily ride, because fixed damping is firm by design. The Rev9 Hyper-Street II above is the better match there, with 32 clicks to soften the ride.

Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000: pair it with

Pair it with a wheel alignment and a track-day check of the brakes, because a lower car needs both.

No verified standalone Amazon listing was found for this exact Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000. Buy the Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21 instead:

Check Price

We may earn a commission at no cost to you.

Drive the kit for a week before you judge the ride, because new coilovers settle and the ride softens slightly. See our guide on best suspension lift kit for more on this.

Spec comparison

ProductDetail
Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05Key spec: Mono-tube shocks, 32-click rebound, full-length adjustable, Honda Civic 2001-05
Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05Best for: Best Overall
Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05Check Price
Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21Key spec: Mono-tube shocks, 32-click rebound, full-length adjustable, Toyota Camry SE/XSE 2018-21
Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21Best for: Best For Camry
Rev9 Hyper-Street II R9-HS2-132_1, Toyota Camry 2018-21Check Price
Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94Key spec: No verified listing; buy the Rev9 R9-HS2-013_2 Civic kit instead. Mono-tube shocks, 32-click rebound, Eclipse FWD 1990-94
Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94Best for: Best For Eclipse
Rev9 Hyper-Street II R9-HS2-018_1, Mitsubishi Eclipse 1990-94Check Price
maXpeedingrods Coilovers, Civic FG/FB 2012-13Key spec: No verified listing; buy the Rev9 R9-HS2-013_2 Civic kit instead. Set of 4, 2 spanners, sway bar pair, Civic 2012-13
maXpeedingrods Coilovers, Civic FG/FB 2012-13Best for: Best Value
maXpeedingrods Coilovers, Civic FG/FB 2012-13Check Price
Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000Key spec: No verified listing; buy the Rev9 R9-HS2-132_1 Camry kit instead. Mono-tube, height-adjustable, fixed damping, Civic 1996-2000
Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000Best for: Best For Track
Skunk2 Pro-S II 541-05-4725, Honda Civic 1996-2000Check Price

Installation and setup basics

Fitting a coilover kit is a job for a shop with a spring compressor, and it starts with the chassis code, not the box. Confirm the kit fits your chassis, then remove the old struts with a spring compressor, fit the coilovers to the maker’s torque figures, and set the height evenly on all four corners. For the fitment check, our guide on coilover kits review for cars walks through the options, and the coilover kits vs lift kit guide explains the difference between lowering and lifting, because a coilover kit is a lowering kit, not a lift.

Set the rebound to the softest setting for the first week, then firm it up a click at a time until the ride feels right. Get a wheel alignment the same week you fit the kit, because a lowered car with a bad alignment wears tyres on the inside edge and handles badly. After a month, recheck the height and the torque, because new coilovers settle and the fasteners need a second check.

Safety essentials

  • Never work under a car held up by a jack alone; use stands.
  • Never compress a spring without the right compressor tool.
  • Wear eye protection when working around springs and struts.
  • Torque every fastener to the maker’s figure, then recheck it.
  • Get a wheel alignment the same week you fit the kit.
  • Stop at once if a spring looks bent or a mount is cracked.

Check the kit before every install, not just at the start of the job. Look for a bent shaft, a cracked mount, and a spring that sits crooked, and do not fit any part that is damaged, because a damaged coilover can fail under load and drop the car. A spring under compression stores enough energy to injure, so use the right compressor, keep your hands clear of the spring, and never stand in line with it while it is compressed.

A lowered car handles differently, so treat the first week as a shakedown: drive gently, listen for noises, and check the height and the torque after a few days. A coilover that clunks, a car that pulls to one side, or a tyre that wears on the inside edge all point to a setup problem, and driving through it only makes it worse. Fix the setup first, then enjoy the lower stance.

Troubleshooting

SymptomCauseFix
Car sits uneven after fittingHeight set differently on each cornerMeasure all four corners and set the height evenly, then align the car
Ride is too harshDamping too firm or spring rate too highSoften the rebound a few clicks, or choose a softer spring rate
Clunking over bumpsLoose top mount or worn bushingCheck the top mounts and bushings, and torque every fastener to the maker’s figure
Tyres wear on the inside edgeAlignment not done after loweringGet a wheel alignment at once, and check the camber
Kit does not fit the carWrong chassis code orderedCheck the chassis code and return the kit; never force a wrong kit to fit
Car pulls to one sideAlignment off or a corner set wrongRecheck the height on all four corners, then align the car

Who should NOT buy these coilover kits

Owners who want to lift their car. A coilover kit in this guide is a lowering kit, and it cannot lift a car. Buy a lift kit instead, and read our best suspension lift kit guide for the lift options.

Owners with worn bushings and bad tyres. A coilover kit does not fix a worn suspension, and a lowered car on bad rubber handles worse than a stock car. Fix the bushings and the tyres first with our suspension bushings review guide, then buy the kit.

Owners who will not align the car. A lowered car without an alignment wears tyres and handles badly, and the kit is only half the job. Budget for the alignment, or do not buy the kit.

Buyers who have not checked the chassis code. A coilover kit fits one chassis, and a kit ordered for the wrong chassis is a kit you return. Check the chassis code, the model year, and the trim before you order, and read our coilover suspension vs springs guide to understand the choice.

Final verdict

Rev9 Hyper-Street II R9-HS2-013_2: the best coilover kit in this guide, for a 2001-05 Honda Civic street setup with 32-click rebound.

Rev9 Hyper-Street II R9-HS2-132_1: the best coilover kit for a 2018-21 Toyota Camry SE or XSE.

Rev9 Hyper-Street II R9-HS2-018_1: the best coilover kit for a 1990-94 Mitsubishi Eclipse front-wheel drive.

maXpeedingrods Coilovers: the best value coilover kit, for a full four-corner set on a ninth-gen Civic.

Skunk2 Pro-S II 541-05-4725: the best coilover kit for the track, for a 1996-2000 Honda Civic with fixed damping.

FAQ

What is a coilover kit?

A coilover kit is a shock absorber with a coil spring wrapped around it, sold as a matched set for all four corners, with height adjustment built in. It replaces the factory struts and springs, lowers the car, and lets you adjust the ride height and, on some kits, the damping. A coilover is the proper way to lower a car, because the shock and the spring are matched to each other and to the lower ride height.

Will coilovers fit my car?

Coilovers fit one chassis, so check your car’s chassis code, model year, and trim before you order. A kit for a 2001 Honda Civic does not fit a 2012 Civic, and a kit for a Camry SE does not always fit a Camry LE. Buy the kit that names your chassis code, and never order a kit that only names the model, because the model spans chassis that do not share suspension.

Do coilovers make the ride harsh?

Coilovers can make the ride firmer, but a kit with adjustable rebound can be set soft for the daily drive and firm for a twisty road. A fixed-damping kit is firm by design, and a budget kit can ride firmer than a premium one. Set the rebound soft for the first week, then firm it up a click at a time until the ride feels right for the road you drive on most.

How low can I go with coilovers?

Most street kits lower a car by about one to three inches, and the right height is the one that keeps the tyres clear of the arches and the suspension geometry working. Lower is not always better: too low wears tyres, scrapes on speed bumps, and ruins the handling. Set the height a little higher than you want at first, then lower it after a week when the springs settle.

Do I need an alignment after fitting coilovers?

Yes, always get a wheel alignment the same week you fit coilovers, because lowering a car changes the camber and the toe, which wears tyres on the inside edge and changes the handling. A lowered car with a bad alignment is a car that eats tyres, so the alignment is part of the job, not an extra. Recheck the alignment after a month, when the kit has settled.

Mono-tube or twin-tube coilovers?

A mono-tube shock has one tube with the piston and the gas in the same chamber, which gives a firmer, more consistent ride and better heat handling, while a twin-tube shock has two tubes and a softer ride. Mono-tube suits a firm street or track setup, and twin-tube suits a soft daily ride. Check which type the kit uses, because the type decides the ride more than the brand does.

Can I install coilovers myself?

You can install coilovers yourself if you have a spring compressor, a torque wrench, and a safe way to lift the car, but most owners use a shop, because a spring under compression stores enough energy to injure. Never work under a car held up by a jack alone, never compress a spring without the right tool, and always get a wheel alignment after fitting, whether you fit the kit yourself or a shop does it.

How long do coilovers last?

A good coilover kit lasts for years with regular use, but the lifespan depends on the roads, the mileage, and the care. Check the shafts for leaks, the mounts for cracks, and the springs for corrosion at least once a year, and replace any part that is damaged. A kit that clunks, leaks, or sags has reached the end of its life, and driving on it only makes the handling worse.

More in this field: coilover kits review for cars, coilover kits vs lift kit, coilover suspension vs springs, professional coilover kits vs factory suspension, qa1 coilover kit review, best suspension lift kit, best suspension lift kit for trucks, best suspension lift kit for off road, best jeep suspension parts, suspension bushings review, best brake bleeder kit one person, best brake caliper tools ever, best led halogen bulbs new models, best fog light kits snow.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Rev9 Hyper-Street II R9-HS2-013_2, Honda Civic 2001-05

Check Price