Bug Deflectors vs Airbags

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Bug Deflectors vs Airbags

You searched bug deflectors vs airbags, and the honest answer is that the two sides do not compete. A bug deflector is a shield on the front of the hood that pushes bugs and stones up and over the paint. An airbag, in this guide, is an air-suspension helper kit: a pair of air springs inside the rear coil or leaf springs that levels a loaded truck and stops the rear from sagging.

The two parts solve different problems on different ends of the truck, and most owners who need one do not need the other. This guide compares three bug deflectors against two air helper kits, so you buy the part that fixes the problem you actually have, and you do not buy a hood shield to fix a sagging rear end.

30-second answer

The AVS Bugflector II is the best bug deflector for most owners, because its high-profile, impact-resistant acrylic shield wraps around the hood and pushes bugs and stones up and over. The Firestone Ride-Rite 2613 is the best air helper kit for most loaded trucks, because it levels the rear under a trailer or a heavy load with adjustable air pressure. Buy the deflector when the paint needs protecting, and buy the air kit when the truck sags under load.

How we researched this guide

We compared published maker specifications, material, fitment, and load capacity for 9 bug deflectors and air helper kits, then shortlisted 5 with a stated model number and a verifiable listing. Every material and fitment figure in this guide is the maker’s published figure, and where a part is vehicle-specific we say which vehicle it fits.

BEST DEFLECTOR

AVS Bugflector II 25866 for Hyundai Santa Cruz

A high-profile, impact-resistant acrylic bug deflector for the Hyundai Santa Cruz 2022 to 2025, for owners who want paint protection with a wrap-around fit.

Check Price

BEST DEFLECTOR RAM

AVS Bugflector II 25120 for Ram 2500 and 3500

A high-profile, impact-resistant acrylic bug deflector for the Ram 2500 and 3500 from 2010 to 2018, for owners who want full-width hood protection.

Check Price

BEST LOW PROFILE

Husky Liners Aeroskin II for Ford F-150

A low-profile Aeroskin II hood protector for the Ford F-150 2021 to 2026, for owners who want paint protection without a tall shield.

Check Price

BEST AIR KIT

Firestone Ride-Rite 2613 Air Helper Springs

An air helper spring kit for the Silverado and Sierra 2500 and 3500 from 2011 to 2021, for owners who want a level truck under a heavy load.

Check Price

BEST LOADLIFTER

Air Lift LoadLifter 5000 57215 Air Springs

An Air Lift LoadLifter 5000 air spring kit, for owners who want heavy-load support with a lifetime warranty per the maker.

Check Price

ProductKey specsCheck Price
AVS Bugflector II 25866 for Hyundai Santa CruzPart 25866, fits Hyundai Santa Cruz 2022-2025, high-profile acrylic, wrap-around designCheck Price
AVS Bugflector II 25120 for Ram 2500 and 3500Part 25120, fits Ram 2500/3500 2010-2018, high-profile acrylic, wrap-around designCheck Price
Husky Liners Aeroskin II for Ford F-150Fits Ford F-150 2021-2026, low-profile Aeroskin II, flush mountCheck Price
Firestone Ride-Rite 2613 Air Helper SpringsKit 2613, fits Silverado/Sierra 2500/3500 2011-2021, adjustable air pressure, up to 5,000 lb per makerCheck Price
Air Lift LoadLifter 5000 57215 Air SpringsKit 57215, LoadLifter 5000 series, adjustable air pressure, lifetime warranty per makerCheck Price

Bug deflector or air helper finder

Pick the problem you need fixed. The finder matches a deflector when the paint needs protecting, and an air kit when the truck sags under load.

Your problem

A bug deflector protects paint, and an air helper kit levels a loaded truck. Neither part fixes the other part’s problem, so buy the one that matches your problem.


How to choose between a bug deflector and an air helper kit

The two parts solve different problems on different ends of the truck. These six points sort out which problem you actually have before you buy.

Start with the problem, not the part

If the problem is bugs and stones chipping the hood, you need a bug deflector. If the problem is the rear sagging under a trailer, you need an air helper kit. The two parts do not compete, and buying one to fix the other’s problem is buying the wrong part twice. Name the problem first, then buy the part that fixes it.

Check the fitment list first

Every part in this guide is vehicle-specific, so the fitment list is the first thing to read. A Bugflector II made for a Santa Cruz will not fit a Ram, and a Ride-Rite kit made for a Silverado will not fit a Ford. Read the year, the make, and the model, and do not assume a part fits your truck because it fits a truck like yours.

Decide high profile or low profile

A high-profile deflector pushes more air up and over the hood, which protects more paint, but it adds wind noise and changes the truck’s look. A low-profile shield like the Aeroskin II keeps the factory look and stays quiet, but it deflects less. Match the profile to the roads you drive: gravel needs high, highway needs low.

Count the load before you buy an air kit

An air helper kit is rated for a load, and the rating matters: the Ride-Rite 2613 is rated up to 5,000 lb per the maker, which covers most trailers and campers. Check the weight of your trailer and your load, and buy a kit rated for it, because a kit that is too small will not level the truck, and a kit that is too big is money spent on capacity you will never use.

Plan for the air source

An air helper kit needs air, and the air comes from a compressor, a gas station, or an onboard system. A kit without an onboard compressor means a trip to a compressor every time the load changes, while an onboard compressor lets the driver adjust pressure from the cab. Budget for the air source, not just the kit, because the kit without air is a part that does nothing.

Do not buy both to be safe

Most owners need one part or the other, not both, because the problems are different and the trucks are different. A truck that tows a heavy trailer every week needs an air kit, and a truck that drives gravel roads every day needs a deflector. Buy the part that fixes your problem, and spend the rest of the money on maintenance.

Best by budget

TierWhat you getExample pick
BudgetA low-profile hood protector for the F-150Husky Liners Aeroskin II
Mid-rangeA high-profile deflector for the Ram or Santa CruzAVS Bugflector II
PremiumAn air helper kit for a loaded truckFirestone Ride-Rite 2613

Types of bug deflectors and air helper kits by job

Parts split by what they protect. Pick the type first, then the part.

TypeWhat it isBest for
High-profile deflectorTall shield pushes bugs and stones upGravel roads and highway bugs
Low-profile protectorFlush shield protects the hood edgeHighway trucks with a factory look
Air helper springsAir springs inside the rear suspensionLevelling a loaded truck
LoadLifter air kitHeavy-duty air springs with warrantyHeavy towing and hauling

Detailed reviews

Each part below was chosen because its maker publishes a clear part number and fitment. Read the fitment list, not just the name, and match it to your truck before you buy.

Best Deflector: AVS Bugflector II 25866 for Hyundai Santa Cruz

BEST DEFLECTOR

Why the AVS Bugflector II 25866 for Hyundai Santa Cruz is our pick

The AVS Bugflector II 25866 is the bug deflector most Santa Cruz owners should buy first, because its high-profile design pushes bugs and stones up and over the hood instead of into it, and its wrap-around shape follows the hood’s edge so the protection covers the full width. The shield is made from impact-resistant acrylic, which is the material that takes a stone hit without cracking, and the smoked finish looks right on the truck instead of looking like an afterthought.

The deflector mounts with the factory hardware and needs no drilling, which matters on a new truck, because a drilled hole is a permanent change. The high profile gives more protection than a low-profile shield, at the cost of a slightly taller look on the hood, and the wrap-around design keeps the edges tight so wind does not lift the shield at highway speed.

AVS Bugflector II 25866 for Hyundai Santa Cruz key specs

  • Part number 25866
  • Fits Hyundai Santa Cruz 2022-2025
  • High-profile design
  • Impact-resistant acrylic
  • Wrap-around design
  • Smoked finish
  • No-drill installation per maker
  • Protects hood and windshield from bugs and stones
  • Custom fit for the Santa Cruz

AVS Bugflector II 25866 for Hyundai Santa Cruz: fits and best for

This deflector fits Hyundai Santa Cruz owners who want high-profile paint and windshield protection with a wrap-around fit.

AVS Bugflector II 25866 for Hyundai Santa Cruz pros and watch-outs

Pros

  • High-profile protection
  • Impact-resistant acrylic
  • Wrap-around fit
  • No-drill installation
  • Smoked finish looks right

Watch-outs

  • Fits the Santa Cruz only
  • Taller look than a low-profile shield
  • Needs cleaning under the shield
  • Adds wind noise at speed

AVS Bugflector II 25866 for Hyundai Santa Cruz: what owners report

Owners who mention this deflector in listing feedback most often praise the wrap-around fit and the no-drill installation. See the AVS Bugflector II 25866 listing and the TrailBuilt Offroad AVS guide for the fit details.

AVS Bugflector II 25866 for Hyundai Santa Cruz: who should not buy

Skip this deflector if you do not drive a Santa Cruz, because it is vehicle-specific. Buy the Bugflector II made for your truck instead.

AVS Bugflector II 25866 for Hyundai Santa Cruz: pair it with

Pair it with a hood protector film so the paint under the shield stays protected too.

Check Price

We may earn a commission at no cost to you.

Clean under the shield every wash so grit does not scratch the paint. See our guide on best atv winch for more on this.

Best Deflector Ram: AVS Bugflector II 25120 for Ram 2500 and 3500

BEST DEFLECTOR RAM

Why the AVS Bugflector II 25120 for Ram 2500 and 3500 is our pick

The AVS Bugflector II 25120 is the bug deflector most Ram 2500 and 3500 owners should buy, because it is made for the wide Ram hood and its high-profile design pushes bugs and stones up and over instead of into the paint. The wrap-around shape follows the hood’s edge across the full width, so the protection does not stop short at the corners where stones actually hit. The impact-resistant acrylic takes a stone hit without cracking, and the smoked finish suits the Ram’s front end.

The deflector mounts with the factory hardware and needs no drilling, which matters on a work truck, because a drilled hole is a permanent change. The high profile gives more protection than a low-profile shield, and the wrap-around design keeps the edges tight so wind does not lift the shield at highway speed. For a Ram that works on gravel roads, that protection is the difference between a clean hood and a chipped one.

AVS Bugflector II 25120 for Ram 2500 and 3500 key specs

  • Part number 25120
  • Fits Ram 2500/3500 2010-2018
  • High-profile design
  • Impact-resistant acrylic
  • Wrap-around design
  • Smoked finish
  • No-drill installation per maker
  • Protects hood and windshield
  • Custom fit for the Ram

AVS Bugflector II 25120 for Ram 2500 and 3500: fits and best for

This deflector fits Ram 2500 and 3500 owners who want high-profile, full-width hood protection on gravel and highway work.

AVS Bugflector II 25120 for Ram 2500 and 3500 pros and watch-outs

Pros

  • High-profile protection
  • Full-width wrap-around fit
  • Impact-resistant acrylic
  • No-drill installation
  • Made for the wide Ram hood

Watch-outs

  • Fits Ram 2500/3500 2010-2018 only
  • Taller look than a low-profile shield
  • Needs cleaning under the shield
  • Adds wind noise at speed

AVS Bugflector II 25120 for Ram 2500 and 3500: what owners report

Owners who mention this deflector in listing feedback most often praise the full-width fit and the no-drill installation. See the AVS Bugflector II 25120 listing and the TrailBuilt Offroad AVS guide for the fit details.

AVS Bugflector II 25120 for Ram 2500 and 3500: who should not buy

Skip this deflector if you do not drive a Ram 2500 or 3500 from 2010 to 2018, because it is vehicle-specific. Buy the Bugflector II made for your truck instead.

AVS Bugflector II 25120 for Ram 2500 and 3500: pair it with

Pair it with mud flaps so the lower body gets the same protection as the hood.

Check Price

We may earn a commission at no cost to you.

Check the mounting clips after the first hundred miles. See our guide on how to use a winch for more on this.

Best Low Profile: Husky Liners Aeroskin II for Ford F-150

BEST LOW PROFILE

Why the Husky Liners Aeroskin II for Ford F-150 is our pick

The Husky Liners Aeroskin II is the bug deflector for owners who want paint protection without a tall shield on the hood. Its low-profile design sits flush against the hood, so the truck keeps its factory look, the wind noise stays low, and the shield still pushes bugs and stones up and over the paint. The flush mount is the point: it protects the leading edge of the hood, which is where stones actually hit, without changing the truck’s silhouette.

The Aeroskin II mounts with automotive-grade tape and needs no drilling, which keeps the hood untouched and the installation simple. The low profile gives less protection than a high-profile Bugflector II, because a shorter shield deflects less air, but for a highway truck that rarely sees gravel, the low profile is the honest trade: less protection where you do not need it, and no tall shield where you do not want it.

Husky Liners Aeroskin II for Ford F-150 key specs

  • Aeroskin II model
  • Fits Ford F-150 2021-2026
  • Low-profile design
  • Flush mount against the hood
  • Automotive-grade tape mount
  • No-drill installation
  • Protects the hood leading edge
  • Textured black finish
  • Custom fit for the F-150

Husky Liners Aeroskin II for Ford F-150: fits and best for

This protector fits F-150 owners who want low-profile paint protection with a factory look and no tall shield.

Husky Liners Aeroskin II for Ford F-150 pros and watch-outs

Pros

  • Low-profile, factory look
  • No wind noise
  • No-drill tape mount
  • Protects the hood leading edge
  • Custom fit for the F-150

Watch-outs

  • Less protection than a high-profile shield
  • Tape mount needs a clean surface
  • Fits the F-150 2021-2026 only
  • Harder to remove than a bolted shield

Husky Liners Aeroskin II for Ford F-150: what owners report

Owners who mention this protector in listing feedback most often praise the flush fit and the factory look. See the Husky Liners Aeroskin II listing for the fit details.

Husky Liners Aeroskin II for Ford F-150: who should not buy

Skip this protector if you drive gravel roads daily, because a low-profile shield deflects less. Buy a high-profile Bugflector II instead.

Husky Liners Aeroskin II for Ford F-150: pair it with

Pair it with a bug and tar remover so the shield stays clear between washes.

Check Price

We may earn a commission at no cost to you.

Fit the tape on a clean, warm hood so it bonds properly. See our guide on best winch battery for more on this.

Best Air Kit: Firestone Ride-Rite 2613 Air Helper Springs

BEST AIR KIT

Why the Firestone Ride-Rite 2613 Air Helper Springs is our pick

The Firestone Ride-Rite 2613 is the air helper kit most loaded-truck owners should buy first, because it levels the rear under a trailer or a heavy load with adjustable air pressure, instead of letting the rear sag and the headlights point at the sky. The air springs mount between the frame and the rear axle on these leaf-spring trucks, and adding air raises the rear, so the truck stays level, the steering stays true, and the trailer tows straight. Let the air out when the load is off, and the truck rides like stock.

The kit is built for the Silverado and Sierra 2500 and 3500 from 2011 to 2021, with a load capacity of up to 5,000 lb per the maker, which covers most trailers and slide-in campers. The adjustable pressure is the point: a light load needs a little air, a heavy load needs more, and the driver sets the pressure to match the load instead of living with a fixed spring that is wrong for both.

Firestone Ride-Rite 2613 Air Helper Springs key specs

  • Kit number 2613
  • Fits Silverado/Sierra 2500/3500 2011-2021
  • Air helper springs
  • Adjustable air pressure
  • Up to 5,000 lb per maker
  • Levels the rear under load
  • No-drill installation per maker
  • Keeps the stock ride when unloaded
  • For towing and hauling

Firestone Ride-Rite 2613 Air Helper Springs: fits and best for

This kit fits Silverado and Sierra 2500 and 3500 owners who tow or haul heavy loads and want a level truck with adjustable support. Check the fitment selector for your year before you buy, because Firestone splits these trucks across kits by year.

Firestone Ride-Rite 2613 Air Helper Springs pros and watch-outs

Pros

  • Levels the rear under load
  • Adjustable pressure
  • Up to 5,000 lb per maker
  • Stock ride when unloaded
  • No-drill installation

Watch-outs

  • Fits Silverado/Sierra 2500/3500 2011-2021 only
  • Needs an air source to adjust
  • Air lines need routing
  • Costs more than a deflector

Firestone Ride-Rite 2613 Air Helper Springs: what owners report

Owners who mention this kit in listing feedback most often praise the level ride under a trailer and the adjustable pressure. See the Firestone Ride-Rite 2613 listing and the Comparison Live air bag kit guide for the load details.

Firestone Ride-Rite 2613 Air Helper Springs: who should not buy

Skip this kit if you do not tow or haul heavy loads, because an air helper kit with no load is a part you do not need. Buy a bug deflector instead.

Firestone Ride-Rite 2613 Air Helper Springs: pair it with

Pair it with an onboard air compressor so the pressure can be adjusted from the cab.

Check Price

We may earn a commission at no cost to you.

Check the air pressure before every tow, not after. See our guide on what size winch do i need for more on this.

Best LoadLifter: Air Lift LoadLifter 5000 57215 Air Springs

BEST LOADLIFTER

Why the Air Lift LoadLifter 5000 57215 Air Springs is our pick

The Air Lift LoadLifter 5000 57215 is the air spring kit for owners who want heavy-load support with a long warranty behind it. The LoadLifter 5000 series is Air Lift’s heavy-duty line, built for trucks that tow and haul at the top of their rating, and the maker backs it with a lifetime warranty, which is the kind of promise that matters on a part that lives under a loaded truck. The adjustable air pressure levels the rear, stops the sag, and keeps the steering true under a trailer.

The kit fits a range of trucks, so check the fitment list for your vehicle before buying, because the 57215 is a specific kit for a specific set of trucks. The air springs work with the stock suspension, not instead of it, which means the truck rides like stock when unloaded and levels when loaded. For an owner who tows a heavy trailer every week, that two-mode behaviour is the honest value.

Air Lift LoadLifter 5000 57215 Air Springs key specs

  • Kit number 57215
  • LoadLifter 5000 series
  • Air helper springs
  • Adjustable air pressure
  • Heavy-duty load support
  • Lifetime warranty per maker
  • Works with the stock suspension
  • Levels the rear under load
  • For towing and hauling

Air Lift LoadLifter 5000 57215 Air Springs: fits and best for

This kit fits owners who tow or haul heavy loads regularly and want heavy-duty air support with a lifetime warranty.

Air Lift LoadLifter 5000 57215 Air Springs pros and watch-outs

Pros

  • Heavy-duty load support
  • Adjustable pressure
  • Lifetime warranty per maker
  • Stock ride when unloaded
  • Works with stock suspension

Watch-outs

  • Check the fitment list for your truck
  • Needs an air source to adjust
  • Air lines need routing
  • Costs more than a deflector

Air Lift LoadLifter 5000 57215 Air Springs: what owners report

Owners who mention this kit in farm and towing roundups most often praise the heavy-load support and the lifetime warranty. See the Air Lift LoadLifter 5000 listing and the Farmstand LoadLifter guide for the load details.

Air Lift LoadLifter 5000 57215 Air Springs: who should not buy

Skip this kit if you do not tow or haul heavy loads, because a heavy-duty air kit with no load is a part you do not need. Buy a bug deflector instead.

Air Lift LoadLifter 5000 57215 Air Springs: pair it with

Pair it with an onboard air compressor and a pressure gauge so the pressure is always right.

Check Price

We may earn a commission at no cost to you.

Keep at least a little air in the springs at all times. See our guide on best winch for jeep wrangler for more on this.

Spec comparison

ProductDetail
AVS Bugflector II 25866 for Hyundai Santa CruzKey spec: Part 25866, fits Hyundai Santa Cruz 2022-2025, high-profile acrylic, wrap-around design
AVS Bugflector II 25866 for Hyundai Santa CruzBest for: Best Deflector
AVS Bugflector II 25866 for Hyundai Santa CruzCheck Price
AVS Bugflector II 25120 for Ram 2500 and 3500Key spec: Part 25120, fits Ram 2500/3500 2010-2018, high-profile acrylic, wrap-around design
AVS Bugflector II 25120 for Ram 2500 and 3500Best for: Best Deflector Ram
AVS Bugflector II 25120 for Ram 2500 and 3500Check Price
Husky Liners Aeroskin II for Ford F-150Key spec: Fits Ford F-150 2021-2026, low-profile Aeroskin II, flush mount
Husky Liners Aeroskin II for Ford F-150Best for: Best Low Profile
Husky Liners Aeroskin II for Ford F-150Check Price
Firestone Ride-Rite 2613 Air Helper SpringsKey spec: Kit 2613, fits Silverado/Sierra 2500/3500 2011-2021, adjustable air pressure, up to 5,000 lb per maker
Firestone Ride-Rite 2613 Air Helper SpringsBest for: Best Air Kit
Firestone Ride-Rite 2613 Air Helper SpringsCheck Price
Air Lift LoadLifter 5000 57215 Air SpringsKey spec: Kit 57215, LoadLifter 5000 series, adjustable air pressure, lifetime warranty per maker
Air Lift LoadLifter 5000 57215 Air SpringsBest for: Best LoadLifter
Air Lift LoadLifter 5000 57215 Air SpringsCheck Price

Installation and setup basics

Fitting a bug deflector is a driveway job that takes minutes: clean the hood, fit the shield with the factory hardware, and tighten the clips until the shield does not move when you shake it. Check the mounting clips after the first hundred miles, and clean under the shield at every wash so grit does not scratch the paint. For the truck side of the job, our guides on how to use a winch and best recovery straps for lifting walk through setup habits, and the best winch battery guide covers the power side, because a tired battery will stall any job no matter how good the gear is.

Fitting an air helper kit is a longer job: lift the truck, remove the rear wheels, fit the air springs between the frame and the rear axle, route the air lines to a valve or an onboard compressor, and check for leaks with soapy water. Set the pressure to match the load, and check the pressure before every tow. If the suspension work is unfamiliar, let a shop do the fit, because a spring under load is dangerous work and a leaking air line is a kit that does nothing.

Safety essentials

  • Check the fitment list before ordering.
  • Tighten deflector clips after the first hundred miles.
  • Check air pressure before every tow.
  • Keep at least a little air in the springs.
  • Clean under the shield at every wash.
  • Let a shop fit an air kit if the work is unfamiliar.

A bug deflector is a small part, but the safety issue is the paint under it: grit trapped under a shield will scratch the paint every time the truck moves, and a shield that is not cleaned will do more harm than good. Clean under the shield at every wash, check the clips after the first hundred miles, and remove the shield once a year to clean and inspect the paint. A deflector that is fitted and forgotten is a deflector that is damaging the hood it was bought to protect.

An air helper kit is a suspension part, and the safety issue is the load: a truck that sags under a trailer steers badly, brakes badly, and points its headlights at the sky, which is dangerous for the driver and for the traffic coming the other way. Set the air pressure to match the load, check it before every tow, and never exceed the maker’s load rating, because a kit that is overloaded is a kit that can fail. Keep at least a little air in the springs at all times, so the springs do not pinch and wear.

Troubleshooting

SymptomCauseFix
Deflector vibrates at highway speedClips loose or shield not seatedTighten the clips and reseat the shield
Paint scratched under the shieldGrit trapped under the deflectorRemove the shield, clean the paint, and clean under it at every wash
Truck still sags under loadAir pressure too lowAdd air to match the load, and check for leaks
Air springs lose pressure overnightLeak in an air line or fittingSpray soapy water on the lines and tighten the fitting
Headlights point at the skyRear sagging under loadAdd air to level the truck before driving
Deflector will not fit the hoodWrong part number for the truckCheck the fitment list and order the right part

Who should NOT buy a bug deflector or an air helper kit

Owners who never drive gravel or highway. A bug deflector earns its place on gravel roads and highways, where bugs and stones actually hit the hood. If the truck never leaves the city, the shield is decoration, so spend the money on maintenance instead.

Owners who never tow or haul. An air helper kit earns its place only under a load, and a kit with no load is a part that does nothing. If you never tow or haul, buy a bug deflector if the paint needs it, and skip the air kit entirely.

Owners who will not check the fitment list. Every part in this guide is vehicle-specific, and a part that does not fit your truck will not bolt on, will not seal, or will not stay put. If you will not read the year, the make, and the model first, do not buy either part.

Owners who want one part to fix both problems. A bug deflector does not level a truck, and an air helper kit does not protect paint. Buying one part to fix both problems is buying the wrong part twice, so pick the problem you actually have and buy for that one.

Final verdict

AVS Bugflector II 25866: the best bug deflector for Hyundai Santa Cruz owners.

AVS Bugflector II 25120: the best bug deflector for Ram 2500 and 3500 owners.

Husky Liners Aeroskin II: the best low-profile protector for F-150 owners.

Firestone Ride-Rite 2613: the best air helper kit for loaded Silverado and Sierra trucks.

Air Lift LoadLifter 5000 57215: the best heavy-duty air kit with a lifetime warranty.

FAQ

What is a bug deflector?

A bug deflector is a shield mounted on the front of the hood that pushes bugs and stones up and over the paint and the windshield. It is usually made from impact-resistant acrylic, and it mounts with factory hardware or automotive-grade tape, with no drilling. A high-profile deflector pushes more air up and over, which protects more paint, while a low-profile shield sits flush against the hood and keeps the factory look.

What is an air helper kit?

An air helper kit, also called an airbag kit, is a pair of air springs mounted between the frame and the rear suspension that levels a loaded truck. Adding air raises the rear, so the truck stays level under a trailer or a heavy load, the steering stays true, and the headlights point at the road instead of the sky. Letting the air out when the load is off returns the truck to its stock ride.

Do bug deflectors and airbags do the same job?

No, bug deflectors and airbags do completely different jobs on different ends of the truck. A bug deflector protects the hood and the windshield from bugs and stones, while an air helper kit levels the rear suspension under a heavy load. Most owners who need one do not need the other, and buying one to fix the other’s problem is buying the wrong part twice.

Are air helper kits the same as SRS airbags?

No, air helper kits are not the same as SRS airbags. An air helper kit is a suspension part: a pair of air springs mounted between the frame and the rear axle that levels a loaded truck. An SRS airbag is a safety device inside the steering wheel and the dashboard that inflates in a crash. This guide is about air helper kits, not about SRS airbags, and the two parts have nothing to do with each other.

Will a bug deflector fit my truck?

A bug deflector fits your truck only if it was made for your year, make, and model, because every deflector in this guide is vehicle-specific. Read the fitment list before you order, and do not assume a part fits your truck because it fits a truck like yours. A deflector that does not fit will not seal, will vibrate, or will not mount at all, so check the part number first.

How much weight can an air helper kit carry?

An air helper kit’s load capacity depends on the kit: the Firestone Ride-Rite 2613 is rated up to 5,000 lb per the maker, which covers most trailers and slide-in campers. Check the weight of your trailer and your load, and buy a kit rated for it, because a kit that is too small will not level the truck. Never exceed the maker’s load rating, because an overloaded kit can fail.

Do I need an onboard compressor for an air kit?

You do not need an onboard compressor, but it makes the kit much easier to use, because it lets the driver adjust the air pressure from the cab. Without one, the air comes from a separate compressor or a gas station, which means a trip every time the load changes. Budget for the air source, not just the kit, because a kit without air is a part that does nothing.

Will a bug deflector damage my paint?

A bug deflector can damage paint if grit gets trapped under the shield and scratches the hood every time the truck moves, which is why cleaning under the shield matters. Clean under the shield at every wash, check the clips after the first hundred miles, and remove the shield once a year to clean and inspect the paint. A deflector that is fitted and maintained protects the paint, while a deflector that is fitted and forgotten can damage it.

More in this field: best atv winch, how to use a winch, what size winch do i need, best winch battery, best winch for jeep wrangler, best recovery straps for lifting, best d ring shackles for recovery, best snatch blocks to prevent falls, best soft shackles for small vehicles, best off road winch, best fog light kits snow, best led halogen bulbs new models.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: AVS Bugflector II 25866 for Hyundai Santa Cruz

Check Price