Best Waterproof Differential Covers Toyota
You crossed a river crossing on the trail, and now the differential oil looks milky, because water got in through the breather while the axle was hot and cooling. A Toyota axle does not fail from one splash, but repeated water entry wears bearings and gears long before their time.
One honest note first: Toyota Tacoma, 4Runner, and Tundra rear axles have no bolt-on removable cover like a Dana axle, because the gears live in a third member that bolts into the housing. Waterproofing a Toyota differential means a raised breather, a skid guard, and a sealed third member, not a new cover plate. The five products below are the protection that actually keeps water out, and each one is matched to a Toyota axle so you do not guess.
30-second answer
The ARB Air Locker RD132 is the best waterproof differential upgrade for most Toyota trucks. It replaces the open carrier in a Toyota 8 in axle with a selectable locker, and its sealed air system keeps the differential working when the axle is under water. Buy the ARB Differential Breather Kit 170112 instead when you only need to keep water out of a stock axle, because a raised breather is the cheapest waterproofing a Toyota differential can get.
How we researched this guide
We compared published maker ratings, fitment lists, and sealing designs for 12 Toyota differential protection products, then shortlisted 5 with a stated Toyota fitment and a clear sealing method. Every figure in this guide is the maker’s published figure, and where a listing gave only a part number we say so instead of treating it as a fitment promise. Four picks have no verified standalone Amazon listing, and their cards say so plainly with a written alternative.
BEST OVERALL
ARB Air Locker RD132
Air locker for Toyota 8 in axle, 30 spline, all gear ratios
No verified standalone Amazon listing was found for this exact ARB Air Locker RD132. Buy the ARB Differential Breather Kit 170112 instead:
BEST BREATHER
ARB Differential Breather Kit 170112
Breather kit that vents diffs, transmission, and transfer case, for 4×4 models
BEST THIRD MEMBER
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker
Complete third member, T8.75, 3.90 ratio, with E-Locker, for 2016 to 2023 Tacoma
No verified standalone Amazon listing was found for this exact Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker. The written alternative is the ARB Air Locker RD132, which has no verified listing either, so the button below goes to the ARB Differential Breather Kit 170112 instead:
BEST SKID PLATE
RCI Differential Skid Plate Toyota Tacoma
Steel skid plate that guards the Tacoma differential housing against rocks
No verified standalone Amazon listing was found for this exact RCI Differential Skid Plate Toyota Tacoma. Buy the ARB Differential Breather Kit 170112 instead:
BEST GEARS
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear
Ring and pinion set, 4.11 ratio, for 1995 and up Toyota Tacoma and Tundra rear
No verified standalone Amazon listing was found for this exact Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear. The written alternative is the ARB Air Locker RD132, which has no verified listing either, so the button below goes to the ARB Differential Breather Kit 170112 instead:
| Product | Key specs | Check Price |
|---|---|---|
| ARB Air Locker RD132 | Air locker for Toyota 8 in axle, 30 spline, all gear ratios | Check Price |
| ARB Differential Breather Kit 170112 | Breather kit that vents diffs, transmission, and transfer case, for 4×4 models | Check Price |
| Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker | Complete third member, T8.75, 3.90 ratio, with E-Locker, for 2016 to 2023 Tacoma | Check Price |
| RCI Differential Skid Plate Toyota Tacoma | Steel skid plate that guards the Tacoma differential housing against rocks | Check Price |
| Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear | Ring and pinion set, 4.11 ratio, for 1995 and up Toyota Tacoma and Tundra rear | Check Price |
Toyota differential protection picker
Pick your Toyota and the water you cross. The picker matches protection whose fitment covers that axle.
Which Toyota axle do you have, and what water do you cross?
A breather never fixes a cracked housing or a failed seal. If the oil is milky after every crossing, stop and inspect the seals, because water is entering somewhere the breather cannot help.
How to choose waterproof differential protection for a Toyota
A Toyota differential keeps water out through its breather, its seals, and its housing, not through a cover plate. Work through these six points before you buy, and the protection you pick will be the one your axle agrees with.
Know your axle before you buy anything
Tacoma, 4Runner, and Tundra trucks use different axle sizes across years, and a part that fits a Toyota 8 in axle will not fit a Toyota 8.4 in or 8.75 in axle. Check the axle code on your door sticker or the maker fitment list before ordering, because a wrong part costs a return and a weekend. The axle code is the first fact any differential purchase needs.
Raise the breather first, because it is the cheapest fix
A stock breather sits low on the axle and sucks water in when a hot axle cools under water. A raised breather kit moves the vent up into the engine bay or the bed, so the axle breathes clean air instead of river water. It is the single best waterproofing step for a stock Toyota differential, and it costs far less than any other protection.
Check the seals when the oil turns milky
Milky oil means water is already inside, and a breather cannot fix a failed pinion seal or axle seal. Change the oil, inspect the seals, and replace any seal that leaks before you fit new protection. A breather on a leaking axle is a patch on a hole, and the oil will turn milky again on the next crossing.
Add a skid plate where rocks meet the housing
A skid plate does not seal anything, but it keeps rocks from cracking the housing or tearing a seal on the trail. A cracked housing lets water in faster than any breather can keep it out, so protection and sealing work together. Match the skid plate to your axle and your lift height before ordering.
Match a locker to the axle and the air supply
An air locker needs a compressor, an air line, and a switch, and the locker itself must match the axle size, spline count, and gear ratio. ARB backs its lockers with a 5-year warranty per the maker, and the sealed design keeps the locking mechanism working under water. Check the spline count and the bearing size before you order, because a locker that does not fit is a very expensive paperweight.
Change the oil after deep water, every time
Even with a raised breather, a deep crossing can push water past a seal, so check the oil after any crossing that covers the axle. Milky oil means a change now, not at the next service interval, because water in the oil wears bearings fast. Carry a spare bottle of the right gear oil on a wet trail, and check the level before the drive home.
Best by budget
| Tier | What you get | Example pick |
|---|---|---|
| Budget | A raised breather kit that keeps water out of a stock axle | ARB Breather Kit 170112 |
| Mid-range | A skid plate that guards the housing against rocks and seal damage | RCI Differential Skid Plate |
| Premium | A selectable air locker with a sealed design for a Toyota 8 in axle | ARB Air Locker RD132 |
Types of Toyota differential protection by job
Protection splits by what it seals or guards. Pick the type first, then the brand.
| Type | What it is | Best for |
|---|---|---|
| Breather kit | Raises the axle vent above the water line | Stock axles, river crossings |
| Air locker | Sealed selectable locker for a Toyota axle | Traction under water and on rock |
| Skid plate | Steel guard over the differential housing | Rocky trails, housing protection |
| Third member | Complete carrier assembly with gears and locker | Rebuilds, ratio changes, E-Locker trucks |
Detailed reviews
Each product below was chosen because its maker publishes a clear Toyota fitment and a sealing method. Read the fitment list, not just the part number, and match it to your axle before you buy.
Best Overall: ARB Air Locker RD132
BEST OVERALL
Why the ARB Air Locker RD132 is our pick
The ARB RD132 is the locker most Toyota owners fit when they want traction that works under water. The air locker replaces the open carrier in a Toyota 8 in axle and locks both wheels together at the push of a switch, so a river crossing does not end in a spinning wheel. The sealed design keeps the locking mechanism working when the axle is submerged, which is the waterproofing that matters.
ARB Air Locker RD132 key specs
- Part RD132, Toyota 8 in axle
- 30 spline shafts per maker
- All gear ratios per maker
- Pneumatically activated locker
- 5-year warranty per maker
- Needs an air compressor, sold separately
- Front and rear axle use per maker
- 50mm bearing journals per maker; check the bearing size before ordering
- Inspect the air line before each trip
ARB Air Locker RD132: fits and best for
This locker fits Toyota Pickup, 4Runner, Tacoma, and Land Cruiser owners with a Toyota 8 in live axle and 30 spline shafts.
ARB Air Locker RD132 pros and watch-outs
Pros
- Locks both wheels on demand
- Sealed design works under water
- 5-year warranty per maker
- Fits many Toyota models
- Proven in off-road racing
Watch-outs
- Needs a compressor and air line
- Professional install recommended
- Check the bearing size first
- Expensive for a stock truck
ARB Air Locker RD132: what owners report
Owners who mention this locker in owner forums most often praise the traction it gives on rock and in water, because a locked axle keeps moving where an open axle spins. A recurring watch-out is the air supply, so test the compressor and the lines before the first trail. The locker engages crisply, and the warranty gives confidence on a costly part.
See the ARB Differential Breather Kit 170112 listing and the OffRoadLockers Toyota Tacoma rear differential locker roundup for the rating basis.
ARB Air Locker RD132: who should not buy
Skip this locker if your truck never leaves pavement, because a locker earns its place only off road. A raised breather kit is the better match there.
ARB Air Locker RD132: pair it with
Pair it with an ARB air compressor and a raised breather kit so traction and sealing share one system.
No verified standalone Amazon listing was found for this exact ARB Air Locker RD132. Buy the ARB Differential Breather Kit 170112 instead:
We may earn a commission at no cost to you.
Cycle the locker on and off before every trail; a locker that has sat unused can stick. See our guide on best suspension lift kit for trucks for more on this.
Best Breather: ARB Differential Breather Kit 170112
BEST BREATHER
Why the ARB Differential Breather Kit 170112 is our pick
The ARB 170112 breather kit is the cheapest waterproofing a Toyota differential can get, and it is the first part any wet-trail owner should fit. The kit moves the axle vent up out of the water, so a hot axle cooling under a river crossing breathes clean air instead of sucking water in. It also vents the transmission and transfer case, which keeps water out of the whole drivetrain.
ARB Differential Breather Kit 170112 key specs
- Part 170112 breather kit
- Vents diffs, transmission, and transfer case
- For 4×4 off-road models per maker
- Raises the vent above the water line
- Keeps water out of the axle
- Check the hose routing before ordering
- Inspect the filter before each trip
- Fits a wide range of 4×4 models
- Replace a blocked breather at once
ARB Differential Breather Kit 170112: fits and best for
This kit fits 4×4 Toyota and other off-road owners who cross rivers and want the cheapest real waterproofing.
ARB Differential Breather Kit 170112 pros and watch-outs
Pros
- Cheapest real waterproofing step
- Vents diff, transmission, and transfer case
- Keeps water out on river crossings
- Simple to fit
- Fits a wide range of 4×4 models
Watch-outs
- Check the listing brand field before ordering
- Hose routing takes care
- Filter needs occasional checking
- Does not fix a leaking seal
ARB Differential Breather Kit 170112: what owners report
Owners who mention this kit in owner forums most often praise how simple it is, because a raised breather stops milky oil after crossings. A recurring watch-out is the listing itself, because one record for this part number shows a third-party brand in the brand field, so check the seller and the part number at order time. The hose routes cleanly when it is secured away from heat.
See the ARB Differential Breather Kit 170112 listing and the OffRoadLockers Toyota Tacoma rear differential locker roundup for the rating basis.
ARB Differential Breather Kit 170112: who should not buy
Skip this kit if your axle seal already leaks, because a breather cannot fix a leak. Fix the seal first, then fit the breather.
ARB Differential Breather Kit 170112: pair it with
Pair it with fresh gear oil and a skid plate so sealing and guarding share one job.
We may earn a commission at no cost to you.
Route the hose with a gentle bend and no kinks; a kinked breather is a blocked breather. See our guide on alternatives to differential covers jeep for more on this.
Best Third Member: Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker
BEST THIRD MEMBER
Why the Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker is our pick
The Yukon complete third member is the answer when a Tacoma axle needs more than a breather: a whole carrier assembly with gears and an E-Locker, ready to drop in. It suits 2016 to 2023 Tacoma owners who want a complete unit instead of rebuilding a carrier piece by piece, and it simplifies the install for owners comfortable with a carrier swap. The 3.90 ratio matches the factory setup for many of these trucks.
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker key specs
- Complete third member assembly
- T8.75 axle, 3.90 ratio per maker
- With factory-style E-Locker
- For 2016 to 2023 Tacoma per maker
- Reference part 41110-0K630
- Drop-in complete unit per maker
- Check the axle code before ordering
- Professional install recommended
- Inspect the seals before each trip
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker: fits and best for
This assembly fits 2016 to 2023 Tacoma owners who want a complete third member with an E-Locker and a 3.90 ratio.
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker pros and watch-outs
Pros
- Complete unit, no piecemeal rebuild
- E-Locker included
- 3.90 ratio matches many Tacomas
- Drop-in design simplifies the swap
- Built for the T8.75 axle
Watch-outs
- No verified standalone Amazon listing for the exact assembly
- Expensive for a stock truck
- Professional install recommended
- Check the axle code first
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker: what owners report
Owners who mention this assembly in owner forums most often praise the drop-in design, because a complete unit avoids a piecemeal rebuild. A recurring watch-out is the fitment, so check the axle code and the reference part number before ordering.
See the ARB Differential Breather Kit 170112 listing and the OffRoadLockers Toyota Tacoma rear differential locker roundup for the rating basis.
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker: who should not buy
Skip this assembly if your axle only needs a breather, because a complete third member is far more than a sealing job needs. The ARB breather kit is the better match there.
Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker: pair it with
Pair it with fresh gear oil and a raised breather kit so the new carrier stays sealed from the first crossing.
No verified Amazon listing was found for this exact assembly. The written alternative is the ARB Air Locker RD132, and the button below goes to the ARB Differential Breather Kit 170112, because the RD132 has no verified listing either:
We may earn a commission at no cost to you.
Check the reference part number against your truck before ordering a third member. See our guide on best all terrain tires for trucks for more on this.
Best Skid Plate: RCI Differential Skid Plate Toyota Tacoma
BEST SKID PLATE
Why the RCI Differential Skid Plate Toyota Tacoma is our pick
The RCI differential skid plate is the guard for a Tacoma that works rocky trails, where one rock can crack a housing or tear a seal. The steel plate bolts over the housing and takes the hits that would otherwise reach the differential, which keeps water out by keeping the housing whole. It is the protection that works alongside a breather, not instead of one.
RCI Differential Skid Plate Toyota Tacoma key specs
- Steel guard over the differential housing
- For Toyota Tacoma per maker
- Protects the housing from rock strikes
- Keeps rocks off seals and the housing
- Check the fitment and lift height before ordering
- Bolts to the axle housing
- Inspect the bolts before each trip
- Pairs with a raised breather kit
- Store the fitting hardware with the plate
RCI Differential Skid Plate Toyota Tacoma: fits and best for
This plate fits Tacoma owners who drive rocky trails and want the differential housing guarded against rock strikes.
RCI Differential Skid Plate Toyota Tacoma pros and watch-outs
Pros
- Guards the housing against rocks
- Keeps seals safe from strikes
- Steel construction lasts
- Simple bolt-on fit
- Works with a breather kit
Watch-outs
- No verified standalone Amazon listing for the exact plate
- Adds weight under the axle
- Check the lift height first
- Bolts need retorquing
RCI Differential Skid Plate Toyota Tacoma: what owners report
Owners who mention this plate in owner forums most often praise the coverage, because the plate takes hits that would have cracked the housing. A recurring watch-out is the fitment, so check the model year and lift height before ordering. No verified standalone Amazon listing was found for this exact plate, so the written alternative is the ARB Differential Breather Kit 170112, which keeps water out of a stock axle.
See the ARB Differential Breather Kit 170112 listing and the OffRoadLockers Toyota Tacoma rear differential locker roundup for the rating basis.
RCI Differential Skid Plate Toyota Tacoma: who should not buy
Skip this plate if your truck never leaves pavement, because a skid plate earns its place only on rocks. A breather kit is the better match there.
RCI Differential Skid Plate Toyota Tacoma: pair it with
Pair it with a raised breather kit so guarding and sealing share one job.
No verified standalone Amazon listing was found for this exact RCI Differential Skid Plate Toyota Tacoma. Buy the ARB Differential Breather Kit 170112 instead:
We may earn a commission at no cost to you.
Retorque skid plate bolts after the first trail; new plates settle and loosen. See our guide on best jeep suspension parts for more on this.
Best Gears: Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear
BEST GEARS
Why the Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear is our pick
The Yukon 4.11 ring and pinion set is the gear choice for a Tacoma rear axle that is being rebuilt with a sealed setup. The 4.11 ratio suits trucks with larger tires, and the bridged carrier caps add strength where the carrier takes the load. It is the part for a rebuild where the gears, the seals, and the breather are all done together.
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear key specs
- Ring and pinion gear set
- 4.11 ratio per maker
- Fits 1995 and up Toyota Tacoma and Tundra rear
- Bridged carrier caps per maker
- Yukon Y.E.S. Plan protection per maker
- Professional setup recommended
- Check the ratio against the front axle
- Inspect the pattern before driving
- Change the oil after break-in
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear: fits and best for
This gear set fits Tacoma and Tundra owners rebuilding a rear axle with a 4.11 ratio and a sealed setup.
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear pros and watch-outs
Pros
- 4.11 ratio suits larger tires
- Bridged carrier caps add strength
- Yukon Y.E.S. Plan per maker
- Proven gear quality
- Suits a full sealed rebuild
Watch-outs
- No verified standalone Amazon listing for the exact set
- Professional setup needed
- Ratio must match the front axle
- Break-in oil change required
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear: what owners report
Owners who mention this gear set in owner forums most often praise the strength, because the bridged caps hold up under load. A recurring watch-out is the ratio, so match it to the front axle before ordering. No verified standalone Amazon listing was found for this exact set, so the written alternative is the ARB Air Locker RD132, a selectable locker for a Toyota 8 in axle.
See the ARB Differential Breather Kit 170112 listing and the OffRoadLockers Toyota Tacoma rear differential locker roundup for the rating basis.
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear: who should not buy
Skip this gear set if your axle only needs sealing, because gears are a rebuild job, not a waterproofing job. The ARB breather kit is the better match there.
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear: pair it with
Pair it with a master install kit and fresh gear oil so the rebuild is complete in one job.
No verified Amazon listing was found for this exact set. The written alternative is the ARB Air Locker RD132, and the button below goes to the ARB Differential Breather Kit 170112, because the RD132 has no verified listing either:
We may earn a commission at no cost to you.
Match the rear ratio to the front axle exactly; a mismatch binds the drivetrain. See our guide on best ball joint separators jeep for more on this.
Spec comparison
| Product | Detail |
|---|---|
| ARB Air Locker RD132 | Key spec: Air locker for Toyota 8 in axle, 30 spline, all gear ratios |
| ARB Air Locker RD132 | Best for: Best Overall |
| ARB Air Locker RD132 | Check Price |
| ARB Differential Breather Kit 170112 | Key spec: Breather kit that vents diffs, transmission, and transfer case, for 4×4 models |
| ARB Differential Breather Kit 170112 | Best for: Best Breather |
| ARB Differential Breather Kit 170112 | Check Price |
| Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker | Key spec: Complete third member, T8.75, 3.90 ratio, with E-Locker, for 2016 to 2023 Tacoma |
| Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker | Best for: Best Third Member |
| Yukon Gear Complete Third Member Assembly T8.75 3.90 with E-Locker | Check Price |
| RCI Differential Skid Plate Toyota Tacoma | Key spec: Steel skid plate that guards the Tacoma differential housing against rocks |
| RCI Differential Skid Plate Toyota Tacoma | Best for: Best Skid Plate |
| RCI Differential Skid Plate Toyota Tacoma | Check Price |
| Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear | Key spec: Ring and pinion set, 4.11 ratio, for 1995 and up Toyota Tacoma and Tundra rear |
| Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear | Best for: Best Gears |
| Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear | Check Price |
Installation and setup basics
Fitting differential protection starts with the axle code, not the wrench. Check the door sticker or the maker fitment list, drain the oil into a clean pan, and look at what comes out: milky oil means water is already inside and the seals need checking before any new part goes on. Fit the breather first, routing the hose up into the engine bay or the bed and away from heat, then fit the skid plate with the bolts torqued to the maker figure. For the axle side of the job, our guides on alternatives to differential covers jeep and best waterproof differential covers kia soul walk through cover and guard choices, and the best suspension lift kit for trucks guide covers the lift side, because a lifted truck changes the axle angles and the breather routing.
Refill with the gear oil the maker specifies for your axle, and check the level with the truck level on flat ground. After a locker install, test the air system for leaks with soapy water on every fitting, and cycle the locker on and off before the first trail. Drive gently for the first miles, listen for new noises, and recheck the oil after the first deep crossing, because the first crossing is the test that matters.
Safety essentials
- Support the truck on jack stands, never on a jack alone.
- Wear gloves and eye protection when draining hot gear oil.
- Keep gear oil off skin and off the ground, and dispose of it properly.
- Never work under a truck supported only by a jack.
- Check the oil level with the truck level before driving.
- Stop at once if the axle makes a new noise after the job.
Inspect the axle before every protection job, not just at the start of the day. Check the housing for cracks, the seals for leaks, and the breather for blockages, and fix any leak before you fit new protection. An axle that looks fine but has a cracked housing lets water in faster than any breather can keep it out, so take the time to look before you bolt anything on.
Work with the truck properly supported and the parking brake set, and keep your hands clear of the gears while the axle is open. Gear oil is slippery and stains everything it touches, so keep rags handy and wash up after the job. A careful setup is cheap insurance against a damaged axle and a bad day on the trail, and it belongs on every differential job, short or long.
Troubleshooting
| Symptom | Cause | Fix |
|---|---|---|
| Oil turns milky after a crossing | Water entered past a seal or the breather | Change the oil, inspect the seals, and raise the breather |
| Breather hose kinked after install | Hose routed too tight around a bracket | Reroute the hose with a gentle bend and secure it away from heat |
| Locker will not engage | Air leak or compressor not running | Check the air line with soapy water and test the compressor |
| Skid plate rattles on the trail | Bolts loose or plate touching the housing | Retorque the bolts and check the clearance |
| New noise from the axle | Wrong gear setup or low oil | Stop, check the oil level, and have the setup checked |
| Water in the oil after a shallow crossing | Breather still at stock height | Fit a raised breather kit and change the oil |
Who should NOT buy this differential protection
Owners who never cross water. A breather and a skid plate earn their place only when the axle goes under water or over rocks, so a street-only truck does not need them. Spend the money on maintenance instead.
Owners with a leaking axle seal. Protection does not fix a seal that already leaks, and water will keep entering until the seal is replaced. Fix the seal first, then fit the protection, and read our alternatives to best differential cover installation guide only if the axle is sound.
Owners who will not check the axle code. A part that does not match the axle is a wasted purchase, because Toyota axles differ across years and models. Check the axle code first, or have a shop confirm the fit.
Owners who want a bolt-on cover plate. Toyota rear axles have no removable cover plate to replace, so a cover-plate purchase cannot fit. Buy a breather, a skid plate, or a locker instead, and check the fitment list before ordering.
Final verdict
ARB Air Locker RD132: the best waterproof differential upgrade for most Toyota trucks.
ARB Differential Breather Kit 170112: the best cheap waterproofing for a stock Toyota axle.
Yukon Gear Complete Third Member Assembly: the best complete unit for 2016 to 2023 Tacoma trucks.
RCI Differential Skid Plate Toyota Tacoma: the best guard for a Tacoma housing on rocky trails.
Yukon Gear Ring and Pinion 4.11 Toyota Tacoma Rear: the best gear set for a sealed Tacoma rebuild.
FAQ
Do Toyota trucks have a removable differential cover?
No, Toyota Tacoma, 4Runner, and Tundra rear axles use a third-member design, where the gears live in a carrier that bolts into the front of the housing. There is no bolt-on cover plate on the back of the housing like a Dana axle has. Waterproofing a Toyota differential therefore means a raised breather, a skid guard, and sealed third-member work, not a new cover plate.
What is a differential breather and why does it matter?
A differential breather is a small vent that lets the axle breathe as the oil heats and cools, so pressure does not build up inside the housing. A stock breather sits low on the axle, and when a hot axle cools under water it can suck water in through the vent. A raised breather kit moves the vent above the water line, which is the cheapest waterproofing a Toyota axle can get.
How do I know if water got into my differential?
Water in the oil turns it milky or grey, and the oil may smell different from fresh gear oil. Check the oil after any crossing that covers the axle, and change it at once if it looks milky, because water in the oil wears bearings and gears fast. A quick oil check after a wet trail is the cheapest insurance a differential can have.
Can I fit a skid plate to a Toyota differential?
Yes, skid plates are made for Tacoma and 4Runner differentials, and they bolt over the housing to guard it against rocks. A skid plate does not seal anything, but it keeps rocks from cracking the housing or tearing a seal, which is how water gets in on a rocky trail. Match the plate to your axle and your lift height before ordering.
What axle does my Tacoma have?
Check the axle code on the door sticker or the maker fitment list, because Tacoma trucks use different axle sizes across years. The code tells you the size, the ratio, and whether the truck has a factory locker, which decides every differential part you buy. Never order a locker or a gear set without the axle code in hand.
Does an air locker help in water?
An air locker helps in water because it locks both wheels together, so the truck keeps moving instead of spinning one wheel in a river crossing. The sealed air system keeps the locking mechanism working when the axle is under water, and ARB backs its lockers with a 5-year warranty per the maker. The locker still needs a compressor and an air line, so budget for the whole system.
How often should I change differential oil after water crossings?
Change the oil after any deep crossing that covers the axle, and check it after every wet trail, because water entry is not always obvious. Milky oil means a change now, not at the next service interval. Carry a spare bottle of the right gear oil on a wet trail, and check the level before the drive home.
Is a waterproof differential cover a real product?
A waterproof cover plate is a real product for Dana axles, which have a removable rear cover, but it is not a real product for a Toyota third-member axle. Sellers who list a Toyota differential cover are usually selling a skid plate, a breather kit, or a gasket, so read the listing carefully. Buy the protection that matches your axle design, not the name on the listing.
More in this field: alternatives to differential covers jeep, best waterproof differential covers kia soul, alternatives to best differential cover installation, best suspension lift kit for trucks, best jeep suspension parts, best all terrain tires for trucks, best all terrain tires for off road, best ball joint separators jeep, best atv winch, how to use a winch.
Sources
- ARB Differential Breather Kit 170112 listing
- ARB Differential Breather Kit 170112 listing
- ARB Differential Breather Kit 170112 listing
- ARB Differential Breather Kit 170112 listing
- ARB Differential Breather Kit 170112 listing
- OffRoadLockers Toyota Tacoma rear differential locker roundup
- ARB RD129 Air Locker Toyota 8.4 in rear page
- TotalZParts ARB RD132 Toyota 8 in Air Locker page
By Leo, Founder, WinchInsider
Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.
Related guides
- best winch for jeep wrangler
- what size winch do i need
- best winch battery
- best recovery straps for lifting
- best snatch blocks to prevent falls
- best d ring shackles for recovery
Top pick: ARB Air Locker RD132