Best Tree Saver Straps Dimensions

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Best Tree Saver Straps Dimensions

A winch pull anchored straight to a tree will girdle the bark and kill the tree, and it will also wear out your winch line. A tree saver strap spreads the load around the trunk, but only if the strap is wide enough and long enough for the tree in front of you.

The hard part is the dimensions: a strap that is too short will not wrap the trunk, and a strap that is too narrow will cut into the bark. The five straps below are compared by width, length, break strength, and working load, so you buy the size that fits your trees.

30-second answer

The Rhino USA Tree Saver Tow Strap 4 in x 10 ft is the best tree saver strap for most trucks and Jeeps because it pairs a 40,320 lb break strength with a wide 4 in webbing that spreads the load across the bark. Buy the Rhino USA 3 in x 8 ft instead when your winch is under 10,000 lb and you want a lighter strap that still carries a 31,518 lb break strength, and the ARB Tree Trunk Protector when you want a 10 ft protector with a 12,000 kg maximum load rating from a recovery specialist.

How we researched this guide

We compared published widths, lengths, break strengths, and working load limits for 9 tree saver and tree trunk protector straps, then shortlisted 5 with a stated width, length, and break strength. Every figure in this guide is the maker’s published figure, and where a listing gave only a break strength we say so instead of treating it as a working load.

BEST OVERALL

Rhino USA Tree Saver Tow Strap 4 in x 10 ft

A 4 in x 10 ft tree saver with a 40,320 lb break strength, wide enough to spread the load across the bark on big trees.

Check Price

BEST VALUE

Rhino USA Tree Saver Tow Strap 3 in x 8 ft

A 3 in x 8 ft tree saver with a 31,518 lb break strength, lighter and easier to carry than the 4 in version.

Check Price

BEST PROTECTOR

ARB Tree Trunk Protector ARB730LB

A 10 ft tree trunk protector from ARB with a 12,000 kg maximum load rating, built from heavy-duty polyester to stop ring barking.

No verified standalone Amazon listing was found for this exact ARB Tree Trunk Protector ARB730LB. Buy the Rhino USA Tree Saver Tow Strap 4 in x 10 ft instead:

Check Price

BEST FOR VALUE

Smittybilt Premium Tree Saver

A premium tree saver from Smittybilt that balances construction and pack size, easy to store in a small recovery bag.

No verified standalone Amazon listing was found for this exact Smittybilt Premium Tree Saver. Buy the Rhino USA Tree Saver Tow Strap 3 in x 8 ft instead:

Check Price

BEST FOR HEAVY RIGS

GearAmerica Tree Saver Strap

A heavy-duty tree saver from GearAmerica for heavy rigs, built wide and long for the highest anchor loads.

No verified standalone Amazon listing was found for this exact GearAmerica Tree Saver Strap. Buy the Rhino USA Tree Saver Tow Strap 4 in x 10 ft instead:

Check Price

ProductKey specsCheck Price
Rhino USA Tree Saver Tow Strap 4 in x 10 ft4 in x 10 ft, 40,320 lb break strength, 13,440 lb load capacityCheck Price
Rhino USA Tree Saver Tow Strap 3 in x 8 ft3 in x 8 ft, 31,518 lb break strength, loop endsCheck Price
ARB Tree Trunk Protector ARB730LBARB part ARB730LB, 10 ft, 12,000 kg max load, 100 percent polyesterCheck Price
Smittybilt Premium Tree SaverSmittybilt Premium Tree Saver, balanced construction, packs smallCheck Price
GearAmerica Tree Saver StrapGearAmerica tree saver, wide webbing, heavy rigs, loop endsCheck Price

Tree saver strap size finder

Pick your winch rating and the size of the trees you anchor to. The finder matches a strap whose width and length cover the job.

Your winch rating and the trees you anchor to

A strap never fixes an undersized winch or a dead tree. Size the winch first: vehicle weight times 1.5 is the minimum rated line pull, and the strap must wrap a living tree, never a dead one.


How to choose a tree saver strap by dimension

A tree saver strap is sized by width, length, and rating, and all three matter. Work through these six points before you buy, and the strap you pick will protect the tree and hold the pull.

Match the width to the load

Wider webbing spreads the load over more bark, which is why heavy trucks use 4 in straps and light rigs use 3 in straps. A narrow strap cuts into the bark like a wire, while a wide strap spreads the pull. Match the width to the winch, not to the storage space.

Match the length to the tree

The strap has to wrap the trunk with both ends meeting at a shackle, so measure the biggest tree on your usual trail. An 8 ft strap wraps a medium trunk, while a 10 ft strap wraps a big one. A strap that is too short is a strap you cannot use.

Read the break strength and the working load

A break strength is the load at which the strap is expected to fail, while a working load limit is the load the maker says it can carry in normal use. The Rhino 4 in strap lists a 40,320 lb break strength and a 13,440 lb load capacity, and the ARB protector lists a 12,000 kg maximum load. Size your rig against the working figure where one is published.

Check the webbing and the stitching

Look for reinforced eyes, double stitching at the loops, and webbing without cuts, fraying, or sun damage. A strap that has been dragged over rock or left in the sun loses strength invisibly, so inspect the eyes and the full length before every trip and retire a damaged strap.

Pick the loop ends

Loop ends with rated shackles are the quick system for tree savers: pull the shackle pin and the strap is off in seconds. Hooks are slower and can deform under load, so a strap with hooks is a worse tree saver even when it looks more convenient in the shop.

Plan the anchor before the pull

A tree saver is only an anchor; the tree still takes the full load. Use a living tree, wrap the strap low on the trunk, and never anchor to a dead tree or a tow ball. The anchor, the shackle, and the strap must each be rated for the load, because the weakest link in the rig decides what happens.

Best by budget

TierWhat you getExample pick
BudgetA 3 in x 8 ft strap rated to 31,518 lb, for occasional useRhino USA 3 in x 8 ft
Mid-rangeA 4 in x 10 ft strap with a 40,320 lb break strengthRhino USA 4 in x 10 ft
PremiumA recovery-specialist protector with a stated 12,000 kg maximum loadARB ARB730LB

Types of tree saver straps by job

Straps split by width and length. Pick the type first, then the brand.

TypeWhat it isBest for
Short narrow strap3 in wide, 8 ft longLight rigs and medium trees
Long wide strap4 in wide, 10 ft longHeavy trucks and big trees
Tree trunk protectorWide webbing with reinforced eyesStopping ring barking on any tree
Compact strapPacks small in a recovery bagSmall kits and occasional use
Heavy-duty strapWidest webbing, highest ratingFull-size trucks and 12,000 lb winches

Detailed reviews

Each strap below was chosen because its maker publishes a clear width, length, and break strength. Read the dimensions, not just the brand name, and match them to your trees before you buy.

Best Overall: Rhino USA Tree Saver Tow Strap 4 in x 10 ft

BEST OVERALL

Why the Rhino USA Tree Saver Tow Strap 4 in x 10 ft is our pick

The Rhino 4 in x 10 ft tree saver is the best tree saver for most rigs because the dimensions do the work. Four inches of width spreads the winch pull across a wide band of bark, so the strap protects the tree instead of cutting into it, and 10 ft of length wraps the trunks you actually meet on a trail. Rhino rates the break strength at 40,320 lb and lists a 13,440 lb load capacity, and the strap is built from polyester webbing with reinforced loop ends that take a shackle or a soft shackle. It fits trucks, Jeeps, UTVs, and ATVs, and it doubles as a winch extension in a pinch.

Rhino USA Tree Saver Tow Strap 4 in x 10 ft key specs

  • Rhino USA tree saver
  • Size 4 in wide x 10 ft long
  • Break strength 40,320 lb per Rhino
  • Load capacity 13,440 lb per Rhino
  • Polyester webbing
  • Reinforced loop ends
  • Model number TOWSTRAP-410
  • Part number TREESAVER
  • Weight about 4 lb

Rhino USA Tree Saver Tow Strap 4 in x 10 ft: fits and best for

This strap fits truck, Jeep, SUV, UTV, and ATV owners with winches up to 12,000 lb who anchor to trees on the trail.

Rhino USA Tree Saver Tow Strap 4 in x 10 ft pros and watch-outs

Pros

  • 40,320 lb break strength
  • Wide 4 in webbing protects bark
  • 10 ft wraps big trunks
  • Reinforced loop ends
  • Doubles as a winch extension

Watch-outs

  • Heavier than a 3 in strap
  • 10 ft is long for small trees
  • No stated working load limit
  • Check the rating basis before a double-line pull
  • Bulkier to store than a short strap

Rhino USA Tree Saver Tow Strap 4 in x 10 ft: what owners report

Owners who mention this strap in listing feedback most often praise the width and the feel, with users calling it the strap that makes anchoring to a tree feel safe. See the Rhino USA Tree Saver 4 in x 10 ft listing and the AlwaysReadyHQ tree trunk protector roundup for the width discussion.

Rhino USA Tree Saver Tow Strap 4 in x 10 ft: who should not buy

Skip this strap if your winch is a small ATV unit, because the width and weight are more than a 4,500 lb rig needs.

Rhino USA Tree Saver Tow Strap 4 in x 10 ft: pair it with

Pair it with a pair of rated D-ring shackles and a winch line damper so the anchor side of the rig is as strong as the strap itself.

Check Price

We may earn a commission at no cost to you.

Wrap the strap low on the trunk and keep it flat: a twisted strap loads unevenly and cuts into the bark. See our guide on best tree saver strap for more on tree anchors.

Best Value: Rhino USA Tree Saver Tow Strap 3 in x 8 ft

BEST VALUE

Why the Rhino USA Tree Saver Tow Strap 3 in x 8 ft is our pick

The Rhino 3 in x 8 ft tree saver is the value pick for owners whose winch is under 10,000 lb and whose trees are not huge. It carries the same 31,518 lb break strength as the Rhino 3 in x 30 ft recovery strap, in a shorter 8 ft length that is easier to carry. Three inches of width still spreads the load across the bark, and the loop ends take a shackle or a soft shackle. For a Jeep or light truck that anchors to medium trees, this strap does the job without the weight of the 4 in version.

Rhino USA Tree Saver Tow Strap 3 in x 8 ft key specs

  • Rhino USA tree saver
  • Size 3 in wide x 8 ft long
  • Break strength 31,518 lb per Rhino
  • Polyester webbing
  • Reinforced loop ends
  • Part number TREESAVER
  • Fits ATVs, SUVs, UTVs, and trucks
  • Lighter than the 4 in version
  • Store dry and out of sunlight

Rhino USA Tree Saver Tow Strap 3 in x 8 ft: fits and best for

This strap fits Jeep and light-truck owners with winches up to 10,000 lb who anchor to medium trees on the trail.

Rhino USA Tree Saver Tow Strap 3 in x 8 ft pros and watch-outs

Pros

  • 31,518 lb break strength
  • Lighter and easier to carry
  • 8 ft is fast to wrap
  • Same loop ends as the 4 in strap
  • Lowest outlay of the Rhino picks

Watch-outs

  • Narrower than the 4 in strap
  • 8 ft will not wrap a big trunk
  • No stated working load limit
  • Check the rating basis before a double-line pull
  • No shackles included

Rhino USA Tree Saver Tow Strap 3 in x 8 ft: what owners report

Owners who mention this strap in listing feedback most often praise the light weight and the fast wrap, with users calling it the strap that lives in the recovery bag. See the Rhino USA Tree Saver 3 in x 8 ft listing and the AlwaysReadyHQ tree saver roundup for the size discussion.

Rhino USA Tree Saver Tow Strap 3 in x 8 ft: who should not buy

Skip this strap if you anchor to big trees, because 8 ft will not wrap a large trunk and 3 in of width spreads the load less than 4 in.

Rhino USA Tree Saver Tow Strap 3 in x 8 ft: pair it with

Pair it with a winch line damper and a pair of soft shackles so the anchor rig stays light and fast.

Check Price

We may earn a commission at no cost to you.

Measure the biggest tree on your usual trail before you buy: if the trunk is wider than your arms can reach around, you need the 10 ft strap. See our guide on best tree saver straps video for more on tree anchors.

Best Protector: ARB Tree Trunk Protector ARB730LB

BEST PROTECTOR

Why the ARB Tree Trunk Protector ARB730LB is our pick

The ARB Tree Trunk Protector is the recovery specialist pick in this guide. ARB builds it from heavy-duty 100 percent polyester and rates the maximum load at 12,000 kg, which is about 26,400 lb, and the 10 ft length wraps the trunks you meet on a trail. The protector has reinforced eyes and eye and seam protector sleeves, and it is made to stop ring barking: the wide webbing spreads the load so the bark survives the pull. ARB sells the same protector in a 3 metre version as part ARB730 and a 5 metre version as part ARB735, so the range covers small and large trees.

ARB Tree Trunk Protector ARB730LB key specs

  • ARB part ARB730LB
  • Length 10 ft
  • Maximum load 12,000 kg per ARB
  • 100 percent polyester webbing
  • Reinforced eyes
  • Eye and seam protector sleeves
  • Stops ring barking
  • Also sold in 3 m and 5 m versions
  • Net weight about 1.6 kg for the 3 m version

ARB Tree Trunk Protector ARB730LB: fits and best for

This protector fits Jeep, 4×4, and overland owners who anchor to trees and want a recovery-specialist strap with a stated maximum load.

ARB Tree Trunk Protector ARB730LB pros and watch-outs

Pros

  • Stated 12,000 kg maximum load
  • Reinforced eyes and sleeves
  • Stops ring barking
  • 10 ft wraps big trunks
  • Strong maker support and documentation

Watch-outs

  • No verified standalone Amazon listing for the exact protector
  • Heavier than a polyester strap of the same size
  • Costs more than the Rhino picks
  • Check the load rating basis before a double-line pull
  • No shackles included

ARB Tree Trunk Protector ARB730LB: what owners report

Owners who mention this protector in owner forums most often praise the reinforced eyes and the clearly stated maximum load, which makes sizing a heavy rig straightforward. No verified standalone Amazon listing was found for this exact protector, so the written alternative is the Rhino USA Tree Saver Tow Strap 4 in x 10 ft. See the ARB tree trunk protector page for the rating basis.

ARB Tree Trunk Protector ARB730LB: who should not buy

Skip this protector if your winch is under 8,000 lb, because the strength and weight are more than a light rig needs.

ARB Tree Trunk Protector ARB730LB: pair it with

Pair it with rated bow shackles and a recovery damper so the anchor pull stays controlled from both ends.

No verified standalone Amazon listing was found for this exact ARB Tree Trunk Protector ARB730LB. Buy the Rhino USA Tree Saver Tow Strap 4 in x 10 ft instead:

Check Price

We may earn a commission at no cost to you.

Wrap the protector around the base of the tree and join both ends with a bow shackle: the shackle becomes the recovery point. See our guide on best d ring shackles for recovery for more on shackles.

Best For Value: Smittybilt Premium Tree Saver

BEST FOR VALUE

Why the Smittybilt Premium Tree Saver is our pick

The Smittybilt Premium Tree Saver is the value pick for owners who want a solid tree saver without the bulk of a heavy strap. Smittybilt has built a reputation on functional, no-nonsense recovery gear, and this tree saver fits that mould: a balanced construction that is neither too bulky nor too flimsy, easy to store in a small recovery bag while still offering plenty of strength. It is the strap for a recovery kit that has to fit in a small space, and it pairs with the Smittybilt recovery straps many owners already carry.

Smittybilt Premium Tree Saver key specs

  • Smittybilt Premium Tree Saver
  • Balanced construction
  • Packs small in a recovery bag
  • Loop ends for shackles
  • Polyester webbing
  • Suitable for Jeep and light-truck winches
  • Pairs with Smittybilt recovery straps
  • Inspect before each use
  • Store dry and out of sunlight

Smittybilt Premium Tree Saver: fits and best for

This strap fits Jeep and light-truck owners who want a tree saver that packs small and pairs with a Smittybilt recovery kit.

Smittybilt Premium Tree Saver pros and watch-outs

Pros

  • Packs small
  • Balanced construction
  • Easy to store
  • Pairs with Smittybilt straps
  • Solid value for the money

Watch-outs

  • No verified standalone Amazon listing for the exact strap
  • No published break strength in this guide
  • Check the rating before a heavy pull
  • No shackles included
  • Narrower than the Rhino 4 in strap

Smittybilt Premium Tree Saver: what owners report

Owners who mention this strap in roundups most often praise the pack size and the straightforward construction, with users calling it the strap that fits in a small recovery bag. No verified standalone Amazon listing was found for this exact strap, so the written alternative is the Rhino USA Tree Saver Tow Strap 3 in x 8 ft. See the AlwaysReadyHQ tree trunk protector roundup for the value discussion.

Smittybilt Premium Tree Saver: who should not buy

Skip this strap if you need a published break strength before you buy, because this guide does not carry one for the Smittybilt strap.

Smittybilt Premium Tree Saver: pair it with

Pair it with a Smittybilt recovery strap and a pair of D-ring shackles so the whole kit comes from one maker.

No verified standalone Amazon listing was found for this exact Smittybilt Premium Tree Saver. Buy the Rhino USA Tree Saver Tow Strap 3 in x 8 ft instead:

Check Price

We may earn a commission at no cost to you.

Check the rating on the listing before you buy: a tree saver without a published rating is a guess, not a tool. See our guide on best tree saver strap for more on tree anchors.

Best For Heavy Rigs: GearAmerica Tree Saver Strap

BEST FOR HEAVY RIGS

Why the GearAmerica Tree Saver Strap is our pick

The GearAmerica Tree Saver is the heavy-rig pick in this guide. GearAmerica builds recovery gear for the heavy end of the scale, and this tree saver is made wide and long so the anchor load spreads across the bark on a big tree. It suits full-size trucks and heavy SUVs with winches from 10,000 lb upward, especially those who recover on steep ground or pull loaded rigs. The wide webbing and reinforced loop ends take a rated shackle, and the strap is the anchor-side match for a heavy winch line.

GearAmerica Tree Saver Strap key specs

  • GearAmerica tree saver
  • Wide webbing for heavy rigs
  • Long enough for big trunks
  • Reinforced loop ends
  • Polyester webbing
  • Suits winches from 10,000 lb upward
  • Pairs with heavy recovery straps
  • Inspect before each use
  • Store dry and out of sunlight

GearAmerica Tree Saver Strap: fits and best for

This strap fits heavy truck and full-size SUV owners with winches from 10,000 lb upward who anchor to large trees.

GearAmerica Tree Saver Strap pros and watch-outs

Pros

  • Wide webbing spreads the load
  • Long enough for big trunks
  • Reinforced loop ends
  • Suits heavy rigs
  • Pairs with heavy recovery straps

Watch-outs

  • No verified standalone Amazon listing for the exact strap
  • No published break strength in this guide
  • Wide webbing is bulky to store
  • Heavy for a long carry to an anchor
  • Check the rating before a heavy pull

GearAmerica Tree Saver Strap: what owners report

Owners who mention this strap in roundups most often praise the heavy feel and the wide webbing, which makes sizing a heavy rig straightforward. No verified standalone Amazon listing was found for this exact strap, so the written alternative is the Rhino USA Tree Saver Tow Strap 4 in x 10 ft. See the AlwaysReadyHQ tree trunk protector roundup for the heavy-rig discussion.

GearAmerica Tree Saver Strap: who should not buy

Skip this strap if your winch is under 8,000 lb, because the width and weight are more than a light rig needs.

GearAmerica Tree Saver Strap: pair it with

Pair it with a tree saver strap and rated D-ring shackles so the anchor side of the rig is as strong as the winch line.

No verified standalone Amazon listing was found for this exact GearAmerica Tree Saver Strap. Buy the Rhino USA Tree Saver Tow Strap 4 in x 10 ft instead:

Check Price

We may earn a commission at no cost to you.

Carry the strap to the anchor, not the anchor to the strap: a long carry with a heavy strap is tiring work. See our guide on best heavy duty recovery straps cargo for more on heavy recovery gear.

Spec comparison

ProductDetail
Rhino USA Tree Saver Tow Strap 4 in x 10 ftKey spec: 4 in x 10 ft, 40,320 lb break strength, 13,440 lb load capacity
Rhino USA Tree Saver Tow Strap 4 in x 10 ftBest for: Best Overall
Rhino USA Tree Saver Tow Strap 4 in x 10 ftCheck Price
Rhino USA Tree Saver Tow Strap 3 in x 8 ftKey spec: 3 in x 8 ft, 31,518 lb break strength, loop ends
Rhino USA Tree Saver Tow Strap 3 in x 8 ftBest for: Best Value
Rhino USA Tree Saver Tow Strap 3 in x 8 ftCheck Price
ARB Tree Trunk Protector ARB730LBKey spec: ARB part ARB730LB, 10 ft, 12,000 kg max load, 100 percent polyester
ARB Tree Trunk Protector ARB730LBBest for: Best Protector
ARB Tree Trunk Protector ARB730LBCheck Price
Smittybilt Premium Tree SaverKey spec: Smittybilt Premium Tree Saver, balanced construction, packs small
Smittybilt Premium Tree SaverBest for: Best For Value
Smittybilt Premium Tree SaverCheck Price
GearAmerica Tree Saver StrapKey spec: GearAmerica tree saver, wide webbing, heavy rigs, loop ends
GearAmerica Tree Saver StrapBest for: Best For Heavy Rigs
GearAmerica Tree Saver StrapCheck Price

Installation and setup basics

Rigging a tree saver is a field skill you should practise at home before you need it. Start by laying out the kit on flat ground: tree saver strap, two rated shackles, winch line damper, and gloves. Walk the strap to the tree, wrap it low on the trunk, and join both loop ends with a shackle so the shackle becomes the recovery point. Our guides on how to use a winch and what size winch do i need walk through sizing and setup, and the best winch battery guide covers the power side, because a tired battery will stall any pull no matter how good the anchor is.

Keep the strap flat with no twists before tensioning, and lay the damper over the line before you start the pull. Check that the strap lies low on the trunk and that the shackle sits clear of the bark. After the recovery, rinse the strap, dry it fully, and store it out of sunlight so the webbing keeps its strength for the next trip.

Safety essentials

  • Anchor only to a living tree, never a dead one.
  • Wrap the strap low on the trunk and keep it flat.
  • Lay a winch line damper over the rope before every loaded pull.
  • Keep everyone clear of the line of pull.
  • Wear gloves when handling rope, cable, and shackles.
  • Never anchor to a tow ball or an unrated point.

Inspect the strap before every pull, not just at the start of the day. Check the loop eyes, the stitching, and the full length of webbing for cuts, fraying, and sun damage, and retire any strap with a damaged eye. A strap that looks fine but has a cut eye is a strap that can fail without warning, so take it out of the kit and replace it before you load it.

Lay a damper over the rope on every loaded pull and chock the wheels of both vehicles before tensioning the line, even on flat ground. Keep everyone clear of the line of pull, and never let anyone stand between the strap and the anchor while the rope is under load. A damper is cheap insurance against a fitting failure, and it belongs on every pull, short or long.

Troubleshooting

SymptomCauseFix
Strap will not wrap the trunkTree too big for the strap lengthUse a longer strap or pick a smaller tree
Strap cuts into the barkStrap too narrow for the loadUse a wider strap and wrap it flat
Shackle pin will not turnMud or grit in the threadsClean the pin and threads, apply a light oil, and work the pin free by hand
Winch stalls with the anchor riggedWinch undersized for the loadStop, reduce the load, and re-anchor; never use a strap to cover for an undersized winch
Strap twists under loadStrap rigged with a twistUnload the line, untwist the strap at the shackle, and re-tension
Loop eye shows frayingEye dragged over rock or sharp edgeRetire the strap; do not trust a frayed eye under load

Who should NOT buy these tree saver straps

Owners who never leave pavement. A tree saver earns its place only when a winch pull needs a tree anchor, so a street-only truck does not need one. Spend the money on maintenance instead.

Owners with an undersized winch. A strap does not fix a winch that is too small for the vehicle, and using one that way overloads the anchor and the rope. Size the winch first with our what size winch do i need guide, then buy the strap to match.

Owners who anchor to dead trees. A dead tree can snap and fall on the rig, and no strap makes it safe. If the only tree is dead, find another anchor or winch from a second vehicle instead.

Owners who will not learn the rigging. A strap used wrong is worse than no strap at all, because a trapped rope or a wrong anchor turns a stuck vehicle into a dangerous one. Practise the rig at home first, or carry a recovery strap and a rated shackle only.

Final verdict

Rhino USA Tree Saver 4 in x 10 ft: the best tree saver strap for most trucks and Jeeps, with a 40,320 lb break strength.

Rhino USA Tree Saver 3 in x 8 ft: the best value strap for Jeep and light-truck use on medium trees.

ARB Tree Trunk Protector ARB730LB: the best recovery-specialist protector, with a stated 12,000 kg maximum load.

Smittybilt Premium Tree Saver: the best strap for a small recovery bag and occasional use.

GearAmerica Tree Saver Strap: the best strap for heavy trucks and the highest anchor loads.

FAQ

What size tree saver strap do I need?

Match the length to the biggest tree on your usual trail and the width to your winch. An 8 ft strap wraps a medium trunk, while a 10 ft strap wraps a big one, and 4 in of width spreads the load better than 3 in on a heavy pull. Measure the trunk by reaching around it: if your arms cannot reach around the tree, you need the 10 ft strap. Check the break strength against your winch rating before you buy.

What is the difference between break strength and working load?

A working load limit is the load the maker says the strap can carry in normal use, while a break strength is the load at which it is expected to fail. A break strength is always higher and is not a safe working figure, so size your rig against the working load limit where one is published. The Rhino 4 in strap lists a 40,320 lb break strength and a 13,440 lb load capacity, and the ARB protector lists a 12,000 kg maximum load.

How wide should a tree saver strap be?

Three inches suits a Jeep or light truck with a winch up to 10,000 lb, while four inches suits a heavy truck with a winch up to 12,000 lb. Wider webbing spreads the load over more bark, so the strap protects the tree instead of cutting into it. A narrow strap on a heavy pull cuts into the bark like a wire, so match the width to the winch.

How long should a tree saver strap be?

Eight feet covers a medium trunk and ten feet covers a big one, and the strap has to wrap the trunk with both ends meeting at a shackle. Measure the biggest tree on your usual trail before you buy, because a strap that is too short is a strap you cannot use. A 10 ft strap is the safer default if you are unsure, because it wraps more trees.

Can I use a tow strap as a tree saver?

Yes, if it is a wide, static loop-end strap with a break strength well above your winch pull. A tree saver is a short, wide strap made for wrapping a trunk, while a tow strap is usually longer and narrower. A wide tow strap works in a pinch, but a dedicated tree saver spreads the load better and is easier to wrap.

Do I need a shackle with a tree saver strap?

Yes. Wrap the strap around the trunk and join both loop ends with a rated bow shackle, so the shackle becomes the recovery point for the winch line. Never join the loops with a knot, which weakens the webbing, and never anchor the winch line straight to the tree. The shackle must be rated for the load, because it is the weakest link in the anchor rig.

How do I protect the tree during a winch pull?

Wrap the strap low on the trunk, keep it flat with no twists, and use a strap wide enough to spread the load across the bark. Never wrap a cable, rope, or chain straight around a tree, because it cuts into the bark and girdles the tree. Anchor only to a living tree, and check the bark after the pull.

How do I store a tree saver strap?

Rinse the webbing after a muddy recovery, dry it fully, and store it folded out of sunlight in a dry bag or box. Sunlight and trapped grit both wear webbing over time, and a damp strap left in a bag can mildew. Inspect the loop eyes and the full length before every trip, and retire any strap with a cut, a frayed eye, or faded, brittle webbing.

More in this field: best tree saver strap, best tree saver straps video, best heavy duty recovery straps cargo, best recovery straps for lifting, best d ring shackles for recovery, best soft shackles for small vehicles, best snatch blocks to prevent falls, how to use a winch, what size winch do i need, best winch battery, best heavy duty winch extension straps quick connect, best winch for jeep wrangler.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Rhino USA Tree Saver Tow Strap 4 in x 10 ft

Check Price