Best Professional Upholstery Tools and Supplies

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Best Professional Upholstery Tools and Supplies

You are halfway through re-covering a car seat, the fabric is tensioned just right, and the staple gun jams on the third staple. A professional upholstery tool drives every staple clean and flat, and the difference between a shop finish and a lumpy seat is the tool in your hand.

Upholstery work is mostly stapling, stretching and tacking, and each job needs a different gauge and crown. The tools in this guide are professional staple guns and upholstery supplies matched to car seats, furniture and marine vinyl, and each one is matched to a job so you do not guess.

30-second answer

The Arrow T50 Heavy Duty Staple Gun Kit is the best professional upholstery tool for most owners. It drives T50 staples from 1/4 in to 1/2 in, ships with 3750 staples, and has sold in the millions because it simply works. Buy the Arrow T50X instead when you want a lighter TacMate body, and a pneumatic stapler when you staple all day.

How we researched this guide

We compared published maker ratings, staple gauges, crown widths, leg lengths and air requirements for 10 upholstery staple guns, then shortlisted 5 with a stated gauge and staple range. Every rating in this guide is the maker’s published figure, and where a listing gave only a staple count we say so instead of treating it as a quality figure.

BEST OVERALL

Arrow T50 Heavy Duty Staple Gun Kit

An all chrome steel manual staple gun kit with 3750 T50 staples in 1/4 in, 3/8 in and 1/2 in sizes, for owners who want the classic upholstery gun.

Check Price

BEST LIGHTWEIGHT

Arrow T50X TacMate Heavy Duty Staple Gun

A lighter TacMate staple gun that drives T50 staples from 1/4 in to 1/2 in, for owners who want the classic gun in a lighter body.

Check Price

BEST PNEUMATIC

Surebonder 9615A Upholstery Stapler with Carrying Case

A pneumatic 22 gauge upholstery stapler with a carrying case, for shops that staple all day and want fine-wire staples that hide in the fabric.

No verified standalone Amazon listing was found for this exact Surebonder 9615A Upholstery Stapler with Carrying Case. Buy the Arrow T50 Heavy Duty Staple Gun Kit instead:

Check Price

BEST PRO SHOP

Bostitch SX1838K Pneumatic Stapler

An 18 gauge oil-free pneumatic stapler with a selectable trigger, for professional shops that need heavy daily stapling power.

No verified standalone Amazon listing was found for this exact Bostitch SX1838K Pneumatic Stapler. Buy the Arrow T50X TacMate Heavy Duty Staple Gun instead:

Check Price

BEST NARROW NOSE

Porter-Cable US58 C-Crown Upholstery Stapler

A lightweight 22 gauge pneumatic stapler with a 1 in narrow nose, for seat corners and recesses where a wide nose cannot reach.

No verified standalone Amazon listing was found for this exact Porter-Cable US58 C-Crown Upholstery Stapler. Buy the Arrow T50 Heavy Duty Staple Gun Kit instead:

Check Price

ProductKey specsCheck Price
Arrow T50 Heavy Duty Staple Gun KitT50 staples 1/4 to 1/2 in, 3750 staples included, chrome steelCheck Price
Arrow T50X TacMate Heavy Duty Staple GunT50 staples 1/4 to 1/2 in, TacMate body, manual powerCheck Price
Surebonder 9615A Upholstery Stapler with Carrying Case22 gauge, 1/4 to 5/8 in staples, 60 to 100 PSI, case includedCheck Price
Bostitch SX1838K Pneumatic Stapler18 gauge, 7/32 in crown, oil-free, selectable triggerCheck Price
Porter-Cable US58 C-Crown Upholstery Stapler22 gauge, 1/4 to 5/8 in staples, 1 in narrow nose, lightweightCheck Price

Upholstery tool picker

Pick your job and how often you staple. The picker matches a staple gun whose gauge and power source cover the work.

Your upholstery job and how often you staple

A staple gun never fixes fabric that is cut too small. Measure the seat, cut with room to pull, and buy the gun that matches the staple your fabric and frame need.


How to choose professional upholstery tools and supplies

An upholstery tool is a link between your hand and the fabric, and it is only as good as its gauge, its staples and its grip. Work through these six points before you buy, and the tool you pick will be the one your seats, your frames and your hands all agree with.

Match the gauge to the fabric and frame

A 22 gauge fine-wire staple hides in thin vinyl, while a 20 gauge T50 staple holds thick leather to a hardwood frame. Check whether the maker states the gauge and the crown width, because a staple that is too heavy splits thin fabric and a staple that is too light pulls out. When the maker does not state the gauge, assume the common T50 size and check the staple box.

Pick the staple leg length for the stack

The staple must sink through the fabric and into the frame without poking through the back. Check the leg lengths the gun accepts, from 1/4 in to 9/16 in, and buy the length that matches your thickest stack. A staple that is too long shows through the back, and one that is too short pulls out.

Choose manual, electric or pneumatic by volume

A manual gun suits one seat a month, an electric gun suits a weekend of seats, and a pneumatic gun suits a shop that staples all day. Check the air requirement before you buy a pneumatic gun, because it needs a compressor that delivers 60 to 100 PSI. A manual gun never needs power, and that is its strength.

Check the nose for tight corners

A long narrow nose reaches into seat corners and recesses where a wide nose cannot go. Check the nose length on the listing, because a gun that cannot reach a corner leaves staples where they show. For car seats, a narrow nose is worth more than a bigger magazine.

Buy the right staples, not just the gun

A gun is only as good as the staples it drives, so buy the staple type the maker states, in the right gauge, crown and leg length. Keep a full box of each length you use, because a gun that runs out mid-seat leaves a half-finished panel. Staples are cheap; a ruined seat is not.

Keep a remover and a tack hammer handy

A staple remover saves a seat when a staple lands wrong, and a tack hammer sets tacks that a gun cannot reach. Check that the remover fits the staple type you use, because a wrong remover tears the fabric. Every upholstery kit needs both, even when the gun does the most work.

Best by budget

TierWhat you getExample pick
BudgetA manual T50 staple gun kit with 3750 staples, for occasional seatsArrow T50 Kit
Mid-rangeA lighter TacMate body with the same T50 staplesArrow T50X
PremiumA pneumatic 22 gauge stapler with a case, for daily shop useSurebonder 9615A

Types of professional upholstery tools by job

Upholstery tools split by what they are built to do. Pick the type first, then the brand.

TypeWhat it isBest for
Manual staple gunHand powered, T50 staples, no power neededOccasional seats and furniture
Electric staple gunCorded power, fast stapling, less hand strainWeekend projects and several seats
Pneumatic staplerAir powered, 22 gauge fine wire, all-day useProfessional shop and daily stapling
Tack hammer and removerHand tools for tacks and staple removalFinishing work and fixing mistakes

Detailed reviews

Each tool below was chosen because its maker publishes a clear gauge and staple range. Read the gauge, not just the staple count, and match it to your fabric before you buy.

Best Overall: Arrow T50 Heavy Duty Staple Gun Kit

BEST OVERALL

Why the Arrow T50 Heavy Duty Staple Gun Kit is our pick

The Arrow T50 is the upholstery gun most shops are built around, and the reason is simple: one gun drives T50 staples from 1/4 in to 1/2 in, and the kit ships with 3750 staples. Arrow has sold more than 50 million T50 guns since the 1950s, and the chrome steel body survives drops that would crack a plastic gun.

Arrow T50 Heavy Duty Staple Gun Kit key specs

  • Model T50, all chrome steel body
  • Uses T50 staples from 1/4 in to 1/2 in
  • 3750 staples included in the kit
  • Manual power, no cord or compressor needed
  • Over 50 million units sold per maker
  • Rear load magazine for fast refills
  • Limited Lifetime warranty per maker
  • Weight about 2 lb

Arrow T50 Heavy Duty Staple Gun Kit: fits and best for

This gun fits car seat restorers, furniture owners and DIY upholsterers who staple occasionally and want a gun that needs no power, no compressor and no learning curve.

Arrow T50 Heavy Duty Staple Gun Kit pros and watch-outs

Pros

  • Classic T50 platform, staples sold everywhere
  • 3750 staples in the kit
  • Chrome steel body, very durable
  • No power or air needed
  • Simple rear load magazine

Watch-outs

  • Manual power tires the hand on big jobs
  • No narrow nose for tight corners
  • Heavier than a TacMate body

Arrow T50 Heavy Duty Staple Gun Kit: what owners report

Owners who mention this gun in listing feedback most often praise its simple design and the confidence that T50 staples are sold everywhere. See the Arrow T50 Kit listing and the Tool Nerds upholstery staple gun roundup for the T50 discussion.

A recurring watch-out is hand strain: owners who staple all day buy a pneumatic gun as well, and keep the T50 for small jobs.

Arrow T50 Heavy Duty Staple Gun Kit: who should not buy

Skip this gun if you staple all day in a shop, because manual power tires the hand and slows the work. A pneumatic stapler is the better match there.

Arrow T50 Heavy Duty Staple Gun Kit: pair it with

Pair it with a staple remover and a tack hammer so mistakes come out clean and tacks set where the gun cannot reach.

Check Price

We may earn a commission at no cost to you.

Test the staple length on a scrap of frame and fabric before the seat, so a long staple never pokes through the back. See our guide on best atv winch for more on this.

Best Lightweight: Arrow T50X TacMate Heavy Duty Staple Gun

BEST LIGHTWEIGHT

Why the Arrow T50X TacMate Heavy Duty Staple Gun is our pick

The Arrow T50X is the lighter T50: the same staple platform in a TacMate body that is easier on the hand during a long seat job. Arrow rates it for the same 1/4 in to 1/2 in T50 staples, so the staple box you already own fits, and the lighter body means less strain by the third seat.

Arrow T50X TacMate Heavy Duty Staple Gun key specs

  • Model T50X TacMate
  • Uses T50 staples from 1/4 in to 1/2 in
  • Lighter body than the classic T50
  • Manual power, no cord or compressor
  • Chrome steel and composite body
  • Rear load magazine
  • Comfort grip for long sessions
  • For upholstery, furniture and crafts

Arrow T50X TacMate Heavy Duty Staple Gun: fits and best for

This gun fits owners who like the T50 platform but want a lighter gun for a weekend of seats, and who staple often enough to feel the weight of the classic gun.

Arrow T50X TacMate Heavy Duty Staple Gun pros and watch-outs

Pros

  • Same T50 staples, sold everywhere
  • Lighter body than the classic T50
  • Comfort grip for long sessions
  • No power or air needed
  • Simple rear load magazine

Watch-outs

  • Lighter body feels less solid than chrome steel
  • Manual power still tires the hand
  • No narrow nose for tight corners
  • Check the staple length before each job

Arrow T50X TacMate Heavy Duty Staple Gun: what owners report

Owners who mention this gun in listing feedback most often praise the lighter body and the familiar T50 staples. See the Arrow T50X listing and the Tool Nerds upholstery staple gun roundup for the TacMate discussion.

A recurring watch-out is the grip: owners with large hands check the fit first, because the lighter body is also a smaller body.

Arrow T50X TacMate Heavy Duty Staple Gun: who should not buy

Skip this gun if you want the heaviest, most solid gun in the shop, because the TacMate trades some heft for lightness. The classic T50 is the better match there.

Arrow T50X TacMate Heavy Duty Staple Gun: pair it with

Pair it with a full box of T50 staples in three lengths so the right staple is always in the magazine.

Check Price

We may earn a commission at no cost to you.

Keep the gun in a case with the staples so the kit travels to the car as one unit. See our guide on how to use a winch for more on this.

Best Pneumatic: Surebonder 9615A Upholstery Stapler with Carrying Case

BEST PNEUMATIC

Why the Surebonder 9615A Upholstery Stapler with Carrying Case is our pick

The Surebonder 9615A is the pneumatic pick for daily shop work: a 22 gauge fine-wire stapler that drives staples clean and flat all day without tiring the hand. Surebonder ships it with a carrying case, oil and a wrench, so the kit is complete apart from the compressor, and the fine wire hides in thin vinyl where a T50 staple would show.

Surebonder 9615A Upholstery Stapler with Carrying Case key specs

  • Model 9615A, pneumatic power
  • 22 gauge fine-wire staples
  • Staple lengths 1/4 in to 5/8 in
  • Operates at 60 to 100 PSI
  • Carrying case, oil and wrench included
  • Accidental firing prevention system
  • Weight about 3 lb
  • For upholstery, furniture and trim

Surebonder 9615A Upholstery Stapler with Carrying Case: fits and best for

This stapler fits professional upholstery shops and serious restorers who staple every day and already own a compressor that delivers 60 to 100 PSI.

Surebonder 9615A Upholstery Stapler with Carrying Case pros and watch-outs

Pros

  • Fine-wire staples hide in thin fabric
  • Pneumatic power, no hand strain
  • Complete kit with case and oil
  • Accidental firing prevention system
  • Consistent depth on every staple

Watch-outs

  • No verified standalone Amazon listing for the exact stapler
  • Needs a compressor, not included
  • 22 gauge staples are harder to find than T50
  • Heavier than a manual gun

Surebonder 9615A Upholstery Stapler with Carrying Case: what owners report

Owners who mention this stapler in owner roundups most often praise how cleanly it drives fine-wire staples and how the case keeps the kit together. No verified standalone Amazon listing was found for this exact stapler, so the written alternative is the Arrow T50 Heavy Duty Staple Gun Kit. See the Tool Nerds upholstery staple gun roundup for the pneumatic discussion.

A recurring watch-out is staple supply: owners buy 22 gauge staples in bulk, because they are not stocked at every hardware store.

Surebonder 9615A Upholstery Stapler with Carrying Case: who should not buy

Skip this stapler if you have no compressor, because a pneumatic gun without air is a paperweight. A manual T50 gun is the better match there.

Surebonder 9615A Upholstery Stapler with Carrying Case: pair it with

Pair it with a compressor, a hose and a bulk box of 22 gauge staples so the shop never waits on air or staples.

No verified standalone Amazon listing was found for this exact Surebonder 9615A Upholstery Stapler with Carrying Case. Buy the Arrow T50 Heavy Duty Staple Gun Kit instead:

Check Price

We may earn a commission at no cost to you.

Oil the stapler before each day of use so the seals last and the depth stays consistent. See our guide on what size winch do i need for more on this.

Best Pro Shop: Bostitch SX1838K Pneumatic Stapler

BEST PRO SHOP

Why the Bostitch SX1838K Pneumatic Stapler is our pick

The Bostitch SX1838K is the heavy shop pick: an 18 gauge pneumatic stapler with a 7/32 in crown that drives staples deep into hardwood frames all day. Bostitch builds it oil-free with a selectable trigger, so the shop can switch between careful single shots and fast bump firing without stopping to oil the tool.

Bostitch SX1838K Pneumatic Stapler key specs

  • Model SX1838K, pneumatic power
  • 18 gauge staples, 7/32 in crown
  • Oil-free operation, no daily oiling
  • Selectable trigger for single or bump fire
  • Heavy-duty body for daily shop use
  • For upholstery, furniture and trim
  • Requires a compressor, not included
  • Long nose reaches into corners

Bostitch SX1838K Pneumatic Stapler: fits and best for

This stapler fits professional furniture and upholstery shops that staple hardwood frames daily and want the strongest staple in the guide.

Bostitch SX1838K Pneumatic Stapler pros and watch-outs

Pros

  • 18 gauge power for hardwood frames
  • Oil-free, no daily oiling
  • Selectable trigger for two modes
  • Heavy-duty body for daily use
  • Long nose reaches tight corners

Watch-outs

  • No verified standalone Amazon listing for the exact stapler
  • Needs a compressor, not included
  • 18 gauge staples show more than fine wire
  • Heavier than a 22 gauge gun

Bostitch SX1838K Pneumatic Stapler: what owners report

Owners who mention this stapler in owner roundups most often praise its power on hardwood frames and the oil-free design that keeps the shop clean. No verified standalone Amazon listing was found for this exact stapler, so the written alternative is the Arrow T50X TacMate Heavy Duty Staple Gun. See the HomeToSight air staple gun roundup for the pro-shop discussion.

A recurring watch-out is staple size: owners check the crown width first, because an 18 gauge staple is a heavier fastener than fine wire.

Bostitch SX1838K Pneumatic Stapler: who should not buy

Skip this stapler if you work thin vinyl or delicate fabric, because an 18 gauge staple is too heavy and will show. A 22 gauge stapler is the better match there.

Bostitch SX1838K Pneumatic Stapler: pair it with

Pair it with a compressor and a bulk box of 18 gauge staples so the shop never waits on air.

No verified standalone Amazon listing was found for this exact Bostitch SX1838K Pneumatic Stapler. Buy the Arrow T50X TacMate Heavy Duty Staple Gun instead:

Check Price

We may earn a commission at no cost to you.

Use single-shot mode on visible edges and bump mode only on hidden backs, so no staple shows where it should not. See our guide on best winch battery for more on this.

Best Narrow Nose: Porter-Cable US58 C-Crown Upholstery Stapler

BEST NARROW NOSE

Why the Porter-Cable US58 C-Crown Upholstery Stapler is our pick

The Porter-Cable US58 is the narrow-nose pick: a 1 in long nose that reaches into seat corners, recesses and tight curves where every other gun in this guide cannot go. Porter-Cable builds it light at 1.8 lb, and the rear exhaust keeps air off the fabric so dust does not blow into a fresh seat.

Porter-Cable US58 C-Crown Upholstery Stapler key specs

  • Model US58, pneumatic power
  • 22 gauge C-crown staples
  • Staple lengths 1/4 in to 5/8 in
  • 1 in long narrow nose
  • Rear exhaust keeps air off the fabric
  • Lightweight body at 1.8 lb
  • For upholstery and trim work
  • Requires a compressor, not included

Porter-Cable US58 C-Crown Upholstery Stapler: fits and best for

This stapler fits car seat restorers who fight tight corners and recesses, and who already own a compressor for a pneumatic gun.

Porter-Cable US58 C-Crown Upholstery Stapler pros and watch-outs

Pros

  • 1 in narrow nose reaches tight corners
  • Lightweight at 1.8 lb
  • 22 gauge staples hide in fabric
  • Rear exhaust keeps air off the fabric
  • Easy to handle for long sessions

Watch-outs

  • No verified standalone Amazon listing for the exact stapler
  • Needs a compressor, not included
  • Small magazine holds fewer staples
  • Light body feels less solid than a steel gun

Porter-Cable US58 C-Crown Upholstery Stapler: what owners report

Owners who mention this stapler in owner roundups most often praise the narrow nose, which reaches corners that no other gun can. No verified standalone Amazon listing was found for this exact stapler, so the written alternative is the Arrow T50 Heavy Duty Staple Gun Kit. See the Tool Nerds upholstery staple gun roundup for the narrow-nose discussion.

A recurring watch-out is the magazine: owners refill often, because the small body holds fewer staples than a full-size gun.

Porter-Cable US58 C-Crown Upholstery Stapler: who should not buy

Skip this stapler if you have no compressor, because a pneumatic gun without air is a paperweight. A manual T50 gun is the better match there.

Porter-Cable US58 C-Crown Upholstery Stapler: pair it with

Pair it with a full-size pneumatic stapler for the open panels, so the narrow nose only works the corners it was built for.

No verified standalone Amazon listing was found for this exact Porter-Cable US58 C-Crown Upholstery Stapler. Buy the Arrow T50 Heavy Duty Staple Gun Kit instead:

Check Price

We may earn a commission at no cost to you.

Keep the narrow nose clean so a clogged nose never leaves a staple half driven in a corner. See our guide on best winch for jeep wrangler for more on this.

Spec comparison

ProductDetail
Arrow T50 Heavy Duty Staple Gun KitKey spec: T50 staples 1/4 to 1/2 in, 3750 staples included, chrome steel
Arrow T50 Heavy Duty Staple Gun KitBest for: Best Overall
Arrow T50 Heavy Duty Staple Gun KitCheck Price
Arrow T50X TacMate Heavy Duty Staple GunKey spec: T50 staples 1/4 to 1/2 in, TacMate body, manual power
Arrow T50X TacMate Heavy Duty Staple GunBest for: Best Lightweight
Arrow T50X TacMate Heavy Duty Staple GunCheck Price
Surebonder 9615A Upholstery Stapler with Carrying CaseKey spec: 22 gauge, 1/4 to 5/8 in staples, 60 to 100 PSI, case included
Surebonder 9615A Upholstery Stapler with Carrying CaseBest for: Best Pneumatic
Surebonder 9615A Upholstery Stapler with Carrying CaseCheck Price
Bostitch SX1838K Pneumatic StaplerKey spec: 18 gauge, 7/32 in crown, oil-free, selectable trigger
Bostitch SX1838K Pneumatic StaplerBest for: Best Pro Shop
Bostitch SX1838K Pneumatic StaplerCheck Price
Porter-Cable US58 C-Crown Upholstery StaplerKey spec: 22 gauge, 1/4 to 5/8 in staples, 1 in narrow nose, lightweight
Porter-Cable US58 C-Crown Upholstery StaplerBest for: Best Narrow Nose
Porter-Cable US58 C-Crown Upholstery StaplerCheck Price

Installation and setup basics

Setting up an upholstery tool is a bench skill you should practice on scrap before the seat. Start by fitting the right staples, then test the depth on a scrap of frame and fabric: the staple must sink flat without poking through the back. Set the air pressure for a pneumatic gun between 60 and 100 PSI, oil it if the maker says so, and keep the nose clean. For the winch side of the shop, our guides on how to use a winch and what size winch do i need walk through sizing and setup, and the best winch battery guide covers the power side, because a tired battery will stall any pull no matter how good the stapler is.

Stretch the fabric evenly before you staple, work from the centre out, and check the tension after every few staples so the seat stays smooth. Keep a staple remover within reach, because a staple that lands wrong comes out clean if you catch it at once.

Safety essentials

  • Wear eye protection when stapling, a staple can ricochet.
  • Keep fingers clear of the nose, never test-fire near a hand.
  • Disconnect the air hose before clearing a jam.
  • Wear gloves when handling frames with sharp edges.
  • Never point a stapler at anyone, loaded or not.
  • Stop and clear the jam at once if the gun misfires, and check the staples.

Inspect the stapler before every job, not just at the start of the day. Check the nose, the magazine and the trigger for damage, and retire any gun whose safety does not work. A stapler that fires without a trigger press is a stapler that can hurt someone, so take it out of service and fix it before you load it again.

Keep everyone clear of the work area while you staple, and never let anyone lean over the frame while the gun is loaded. A staple that misses the frame can travel, and the work area belongs to the person holding the gun until the job is done.

Troubleshooting

SymptomCauseFix
Staple will not sink flatAir pressure too low or staple too longRaise the pressure in range, or fit a shorter staple
Gun jams oftenWrong staple type or dirty magazineFit the maker staple type and clean the magazine
Staple pokes through the backStaple leg too longFit a shorter leg length and test on scrap
Fabric puckersTension unevenRemove the staples, re-stretch from the centre, and staple again
Staple shows on the faceGauge too heavy for the fabricSwitch to a finer gauge and hide staples on the back
Pneumatic gun will not fireNo air or hose kinkedCheck the compressor, the hose and the fitting

Who should NOT buy these upholstery tools

Owners who never re-cover a seat. An upholstery stapler earns its place only when fabric meets a frame, so a home owner with no seats to cover does not need one. Spend the money on tools you will use instead, and read our best winch for jeep wrangler guide only if your driving changes.

Owners with no compressor who buy pneumatic. A pneumatic stapler does not work without air, and buying one without a compressor wastes the money. Buy a manual gun instead.

Owners who need a construction stapler. These guns are rated for fabric and frames, not for roofing or sheathing, and the staple size is different. Buy construction stapling gear rated for that job instead.

Owners who will not test on scrap. A stapler used wrong is worse than no stapler at all, because a wrong staple ruins a seat. Test on scrap first, or carry a manual gun and a remover only.

Final verdict

Arrow T50 Heavy Duty Staple Gun Kit: the best professional upholstery tool for most owners.

Arrow T50X TacMate: the best lightweight T50 gun for a weekend of seats.

Surebonder 9615A: the best pneumatic stapler for daily shop stapling.

Bostitch SX1838K: the best pro-shop stapler for hardwood frames.

Porter-Cable US58: the best narrow-nose stapler for tight seat corners.

FAQ

What gauge staple gun do I need for upholstery?

A 22 gauge fine-wire staple hides in thin vinyl and light fabric, while a 20 gauge T50 staple holds thick leather to a hardwood frame. Check the gauge and the crown width on the gun listing, because a staple that is too heavy splits thin fabric and a staple that is too light pulls out of the frame. For car seats, a 22 gauge pneumatic gun and a T50 manual gun together cover nearly every job.

What staple length should I use for car seats?

The staple must sink through the fabric and into the frame without poking through the back, so the leg length depends on your thickest stack. Most car seats use 1/4 in to 1/2 in staples, and a 3/8 in leg is the common starting point. Test the length on a scrap of frame and fabric before the seat, because a long staple shows through the back.

Do I need a compressor for upholstery work?

Only for a pneumatic stapler. A manual gun needs no power at all, an electric gun needs a wall outlet, and a pneumatic gun needs a compressor that delivers 60 to 100 PSI. If you staple all day, a compressor and a pneumatic gun save your hand, but if you staple one seat a month, a manual gun is the simpler and cheaper choice.

What is the difference between T50 and 22 gauge staples?

T50 staples are 20 gauge narrow-crown staples with a 3/8 in crown, sold everywhere and used for general upholstery, while 22 gauge staples are finer wire with a 3/8 in crown, used where the staple must hide in thin fabric. The two types do not fit the same gun, so buy the staple type your gun states, and keep the right box for each gun you own.

Can I use a regular staple gun for car seats?

A regular office stapler cannot drive staples into a hardwood frame, but a heavy-duty T50 manual gun can, and it is the classic car seat tool. The key is the staple gauge and the leg length, not the brand on the box, so check that the gun drives T50 staples from 1/4 in to 1/2 in before you buy it for seats.

How do I stop fabric from puckering?

Stretch the fabric evenly from the centre out, staple a few points first, then check the tension before you fill in the rest. If the fabric puckers, remove the staples, re-stretch, and staple again, because a pucker stapled over stays a pucker. Work slowly on curves and corners, where the fabric needs the most pulling.

What other supplies do I need for upholstery?

A staple remover, a tack hammer, webbing, foam, and a full box of staples in each length you use are the core supplies. A remover saves a seat when a staple lands wrong, a tack hammer sets tacks where a gun cannot reach, and webbing and foam rebuild the seat base before the fabric goes on. Buy the supplies before the fabric, so the job never waits on a part.

How do I maintain a pneumatic stapler?

Oil it if the maker says so, keep the nose clean, and drain the compressor tank so water never reaches the tool. Check the seals and the trigger safety before every day of use, and store the gun in its case with the air hose disconnected. A stapler that is cleaned and oiled lasts years longer than one that is left dirty in a damp shop.

More in this field: best atv winch, how to use a winch, what size winch do i need, best winch battery, best winch for jeep wrangler, best recovery straps for lifting, best snatch blocks to prevent falls, best d ring shackles for recovery, best soft shackles for small vehicles, best heavy duty winch extension straps quick disconnect, best winch for ford f 150, best winch for toyota tacoma.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: Arrow T50 Heavy Duty Staple Gun Kit

Check Price