Best Motorcycle Valve Spring Compressor
The valve keepers will not come out until the spring is compressed, and the spring will not compress until the tool fits the head. On a motorcycle, where the head is small and the valves sit close together, the wrong compressor does not fit at all.
The right compressor presses straight down on the retainer, holds the spring, and lets you lift the keepers out with a magnet. The five tools below are the ones bike mechanics actually use, matched to the heads they fit.
30-second answer
The Motion Pro T-6 Valve Spring Compressor 08-0641 is the best motorcycle valve spring compressor for most owners, because its billet aluminium frame presses straight against the retainer, works on all motorcycle, ATV, and UTV heads, and uses a quick-release system that keeps side load off the valve. Buy the Orion Motor Tech universal kit for a budget job, and the OTC 4572 when the head is off the bike and on the bench.
How we researched this guide
We compared published maker jaw ranges, tip types, frame materials, and owner feedback for 14 valve spring compressors, then shortlisted 5 with a stated jaw range or tip type. Every range in this guide is the maker’s published figure, and where a maker does not publish a jaw range we say so instead of guessing.
BEST OVERALL
Motion Pro T-6 Valve Spring Compressor 08-0641
A billet aluminium compressor with a quick-release system that presses straight on the retainer, for all motorcycle, ATV, and UTV heads.
No verified standalone Amazon listing was found for this exact Motion Pro T-6 Valve Spring Compressor 08-0641. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
BEST BUDGET KIT
Orion Motor Tech Universal Valve Spring Compressor
A universal overhead valve spring remover and installer for OHV and OHC engines, with a valve stem tool and keeper tools.
BEST FOR BENCH WORK
OTC 4572 Large Valve Spring Compressor
A large lever compressor for overhead valve engines, with a 1-3/8 to 5-5/8 inch jaw range and a 5-7/8 inch throat.
No verified standalone Amazon listing was found for this exact OTC 4572 Large Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
BEST QUICK ACTION
Motion Pro 08-0247 Quick Action Valve Spring Compressor
A quick-action compressor with cup-type and ball-type tips, for fast valve work on Honda and similar heads.
No verified standalone Amazon listing was found for this exact Motion Pro 08-0247 Quick Action Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
BEST FOR SMALL ENGINES
ABN 8-Inch Valve Spring Compressor
An 8-inch C-clamp compressor for small and medium overhead valve engines, with a 3 to 6.5 inch capacity and a 6 inch throat.
No verified standalone Amazon listing was found for this exact ABN 8-Inch Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
| Product | Key specs | Check Price |
|---|---|---|
| Motion Pro T-6 Valve Spring Compressor 08-0641 | Billet 6061 aluminium frame, quick-release straight press, all bike heads | Check Price |
| Orion Motor Tech Universal Valve Spring Compressor | Universal OHV and OHC, remover and installer, valve stem tool | Check Price |
| OTC 4572 Large Valve Spring Compressor | Jaw range 1-3/8 to 5-5/8 inches, throat 5-7/8 inches, two adapters | Check Price |
| Motion Pro 08-0247 Quick Action Valve Spring Compressor | Quick-action design, cup and ball tips, one-hand compression | Check Price |
| ABN 8-Inch Valve Spring Compressor | 8-inch C-clamp, 3 to 6.5 inch capacity, 6 inch throat | Check Price |
Valve spring compressor finder
Pick the head you face. The finder matches the tool to the job, because a bike head on the bench, a head on the engine, and a small-engine head need different tools.
What valve work are you doing?
A valve spring compressor never fixes a bent valve. Check the valve and the guide for wear before you compress the spring, and replace any valve that is bent or pitted.
How to choose a motorcycle valve spring compressor
A valve spring compressor is a clamp that presses the retainer, and it only works when it presses straight. Work through these six points before you buy, and the tool you pick will fit the head instead of fighting it.
Match the tool to the head
A motorcycle cylinder head is small, with valves close together and little room around the retainer. A compressor built for a car V8 will not fit between the valves, so buy a tool made for motorcycle, ATV, and small-engine heads. Check the maker application list for your bike before you order.
Look for a straight press
The compressor must press straight down on the retainer, because a side load bends the valve and jams the keepers. The Motion Pro T-6 uses a quick-release system that presses straight against the retainer to eliminate side loading, which is why it leads this guide. A tool that presses at an angle will fight you on every valve.
Check the tips
A compressor needs a tip that fits the retainer, and the best tools include both cup-type and ball-type tips for different retainers. The Motion Pro 08-0247 includes both, so it fits more heads without extra parts. Check what tips are in the box before you order.
Mind the jaw range
The jaw range tells you how far the tool opens, and the OTC 4572 covers 1-3/8 inches to 5-5/8 inches with a 5-7/8-inch throat. Measure the distance from the head face to the retainer on your bike, then check the tool range against it. A tool that is too short cannot reach the retainer.
Decide bench or on-engine
A C-clamp compressor works on a head that is off the bike and on the bench, while a lever compressor works with the head still on the engine. The Orion Motor Tech kit is a C-clamp for bench work, while the Motion Pro T-6 works on the head wherever it sits. Decide where the head will be before you buy.
Buy the adapters with the tool
A valve spring compressor often needs an adapter set for different retainer sizes, and the Motion Pro T-6 takes an 18-millimetre and 28-millimetre adapter set. Buying the adapters with the tool saves a second order, and the right adapter keeps the press straight. Check the adapter list for your bike.
Best motorcycle valve spring compressors by budget
| Tier | What you get | Example pick |
|---|---|---|
| Budget | A C-clamp kit with collets for cars, bikes, and small engines | Orion Motor Tech Universal Kit |
| Mid-range | A lever compressor with a straight press for bike heads | OTC 4572 Large Valve Spring Compressor |
| Premium | A billet aluminium T-6 compressor for any bike head | Motion Pro T-6 08-0641 |
Types of valve spring compressors by job
Valve spring compressors split by how they press. Pick the press first, then the brand.
| Type | What it is | Best for |
|---|---|---|
| T-6 clamp compressor | Billet frame presses straight on the retainer | Any motorcycle, ATV, or UTV head |
| C-clamp kit | C-clamp with collets and extension rods | Bench work on cars, bikes, and small engines |
| Lever compressor | Lever presses the retainer with one hand | Quick valve work on a bench head |
| Quick-action compressor | One-hand compression with cup and ball tips | Valves on Honda and similar heads |
Detailed reviews
Each tool below was chosen because its maker publishes a clear jaw range, tip type, or application list. Read the application, not just the brand, and match it to your bike before you buy.
Best Overall: Motion Pro T-6 Valve Spring Compressor 08-0641
BEST OVERALL
Why the Motion Pro T-6 Valve Spring Compressor 08-0641 is our pick
The Motion Pro T-6 is the compressor bike mechanics reach for first, and the reason is the press. Its billet 6061 aluminium frame is stiff and light, and the quick-release system presses straight against the retainer to eliminate side loading on the valve and the keepers. It works on all motorcycle, ATV, UTV, and small-engine cylinder heads.
Motion Pro T-6 Valve Spring Compressor 08-0641 key specs
- Part number 08-0641
- Billet 6061 aluminium frame
- Quick-release straight press
- Works on all motorcycle, ATV, UTV heads
- Eliminates side load on the valve
- Adapter set 08-0700 available
- Lifetime limited warranty per maker
- Check adapter size before ordering
- Keep the frame clean
- Store dry to prevent corrosion
Motion Pro T-6 Valve Spring Compressor 08-0641: fits and best for
This compressor fits owners who do valve work on motorcycles, ATVs, and UTVs, and shops that service bike heads regularly. It suits any bike head, from a small single to a multi-cylinder engine, where a straight press and a stiff frame make the keepers come out cleanly.
Motion Pro T-6 Valve Spring Compressor 08-0641 pros and watch-outs
Pros
- Billet frame is stiff and light
- Straight press protects the valve
- Works on any bike, ATV, or UTV head
- Quick-release saves time
- Lifetime limited warranty
Watch-outs
- No verified standalone Amazon listing for the exact compressor
- Costs more than a C-clamp kit
- Adapters sold separately
- Overkill for one valve job
Motion Pro T-6 Valve Spring Compressor 08-0641: what owners report
Owners who mention this compressor in listing feedback most often praise the straight press and the stiff frame. A recurring watch-out is the outlay, with owners saying it is the best tool if you can afford it. No verified standalone Amazon listing was found for this exact compressor, so the written alternative is the Orion Motor Tech Universal Valve Spring Compressor listing, a universal overhead valve spring remover and installer. See the Orion Motor Tech valve spring compressor listing and the Royal Distributing Motion Pro T-6 page for the frame detail.
Motion Pro T-6 Valve Spring Compressor 08-0641: who should not buy
Skip this compressor if you only do one valve job, because a C-clamp kit costs far less. The Orion Motor Tech kit below is the better match for occasional use.
Motion Pro T-6 Valve Spring Compressor 08-0641: pair it with
Pair it with the 08-0700 adapter set, a magnet for the keepers, and a valve lapping tool for the seats.
No verified standalone Amazon listing was found for this exact Motion Pro T-6 Valve Spring Compressor 08-0641. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
We may earn a commission at no cost to you.
Press straight down, and never force a keeper that will not move; see our best adjustable wrenches or pliers guide for the hand tools that back it up.
Best Budget Kit: Orion Motor Tech Universal Valve Spring Compressor
BEST BUDGET KIT
Why the Orion Motor Tech Universal Valve Spring Compressor is our pick
The Orion Motor Tech universal compressor is the budget pick for valve work, because it covers overhead valve and overhead cam engines in one kit. It removes and installs valve springs, includes a valve stem tool and keeper remover and installer, and it suits a home mechanic who does valve work on a car, a bike, and a small engine with the same tool. For a first valve job, it is the practical buy.
Orion Motor Tech Universal Valve Spring Compressor key specs
- Universal overhead valve spring tool
- For OHV and OHC engines
- Remover and installer in one kit
- Valve stem tool included
- Keeper remover and installer
- Item model FBA_SCS0002BL
- Weight 8.8 lb per listing
- Check fit before ordering
- Keep the tool clean
- Store dry between uses
Orion Motor Tech Universal Valve Spring Compressor: fits and best for
This compressor fits home mechanics doing their first valve job, and owners who service cars, bikes, and small engines with one tool. It suits a head on the bench, where the universal design covers the valves without buying a tool for each engine.
Orion Motor Tech Universal Valve Spring Compressor pros and watch-outs
Pros
- One kit covers OHV and OHC engines
- Remover and installer together
- Keeper tools included
- Low outlay for a full kit
- Good for a first valve job
Watch-outs
- Heavier than a bike-specific tool
- Universal fit needs care on small heads
- Check the fit before ordering
- Not as stiff as a billet frame
Orion Motor Tech Universal Valve Spring Compressor: what owners report
Owners who mention this compressor in listing feedback most often praise the completeness, with keeper tools included in the kit. A recurring watch-out is the fit, with owners checking the head size before ordering. See the Orion Motor Tech valve spring compressor listing and the Top5Best valve spring compressor guide for the kit detail.
Orion Motor Tech Universal Valve Spring Compressor: who should not buy
Skip this kit if you work on bike heads every day, because a T-6 presses straighter. The Motion Pro T-6 above is the better match for daily bike work.
Orion Motor Tech Universal Valve Spring Compressor: pair it with
Pair it with a valve lapping tool and a magnet for the keepers.
We may earn a commission at no cost to you.
Test the fit on the first valve before you commit to the whole head; our top parts washers for automotive guide covers cleaning the head first.
Best For Bench Work: OTC 4572 Large Valve Spring Compressor
BEST FOR BENCH WORK
Why the OTC 4572 Large Valve Spring Compressor is our pick
The OTC 4572 is the bench tool for a head that is off the engine. It is a large lever compressor with a direct-action lever that gives a clear view of the retainer, a jaw opening from 1-3/8 inches to 5-5/8 inches, and a throat clearance of 5-7/8 inches. It comes with two adapters for retainers up to 1 inch and 1-3/16 inches.
OTC 4572 Large Valve Spring Compressor key specs
- Part number 4572
- Large valve spring compressor
- Jaw opening 1-3/8 to 5-5/8 inches
- Throat clearance 5-7/8 inches
- Two adapters, 1 inch and 1-3/16 inches
- Direct-action lever
- For overhead valve engines
- Steel construction
- Check jaw range before ordering
- Grease the screw threads
OTC 4572 Large Valve Spring Compressor: fits and best for
This compressor fits owners with a head off the bike and on the bench, and shops that do valve work on car and bike heads. It suits a bench job where the head is already off, because the lever gives a clear view of the retainer and the keepers.
OTC 4572 Large Valve Spring Compressor pros and watch-outs
Pros
- Clear view of the retainer
- Wide jaw range for many heads
- Two adapters included
- Steel build for bench use
- Fast on a bench head
Watch-outs
- No verified standalone Amazon listing for the exact compressor
- Bench use only, not on-engine
- Heavy for a hand tool
- Only two adapters included
OTC 4572 Large Valve Spring Compressor: what owners report
Owners who mention this compressor in listing feedback most often praise the clear view and the solid build, with one owner calling it worth the money after a cheap tool bent. A recurring watch-out is the adapter count, with owners buying extra adapters for small retainers. No verified standalone Amazon listing was found for this exact compressor, so the written alternative is the Orion Motor Tech Universal Valve Spring Compressor listing, a universal overhead valve spring remover and installer. See the Orion Motor Tech valve spring compressor listing and the MechanicAddicts valve spring compressor guide for the lever detail.
OTC 4572 Large Valve Spring Compressor: who should not buy
Skip this compressor if the head is still on the bike, because it needs bench access. The Motion Pro T-6 above is the better match for on-engine work.
OTC 4572 Large Valve Spring Compressor: pair it with
Pair it with a valve lapping tool, a magnet, and a parts tray for the keepers.
No verified standalone Amazon listing was found for this exact OTC 4572 Large Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
We may earn a commission at no cost to you.
Keep the lever action smooth, and never force a spring that will not compress; see our best bottle jack for caravan guide for safe lifting while the head is off.
Best Quick Action: Motion Pro 08-0247 Quick Action Valve Spring Compressor
BEST QUICK ACTION
Why the Motion Pro 08-0247 Quick Action Valve Spring Compressor is our pick
The Motion Pro 08-0247 is the fast tool for a head with many valves. Its improved quick-action design compresses the spring with one hand, and it includes both cup-type and ball-type tips, so it fits different retainers without swapping tools. Owners report it works in the same applications as the Honda tool 07757-0010000, which is why it earns a place for Honda heads and similar bikes.
Motion Pro 08-0247 Quick Action Valve Spring Compressor key specs
- Part number 08-0247
- Quick-action design
- Cup-type and ball-type tips
- One-hand compression
- For Honda and similar heads
- Works where the Honda tool fits
- Check tip size before ordering
- Keep the action clean
- Store dry to prevent rust
- Not for very large retainers
Motion Pro 08-0247 Quick Action Valve Spring Compressor: fits and best for
This compressor fits owners who do valve work on Honda bikes and similar heads, and anyone who wants one-hand compression for a fast job. It suits a head with many valves, where the quick action saves time on every valve.
Motion Pro 08-0247 Quick Action Valve Spring Compressor pros and watch-outs
Pros
- One-hand compression saves time
- Both tip types included
- Fits Honda heads well
- Quick action is easy to learn
- Good for a full head service
Watch-outs
- No verified standalone Amazon listing for the exact compressor
- Tips must match the retainer
- Not for very large retainers
- Costs more than a C-clamp kit
Motion Pro 08-0247 Quick Action Valve Spring Compressor: what owners report
Owners who mention this compressor in listing feedback most often praise the one-hand action and the two tip types, which fit more retainers than a single-tip tool. A recurring watch-out is the tip size, with owners checking the retainer before ordering. No verified standalone Amazon listing was found for this exact compressor, so the written alternative is the Orion Motor Tech Universal Valve Spring Compressor listing, a universal overhead valve spring remover and installer. See the Orion Motor Tech valve spring compressor listing and the Valve spring compressor roundup for the quick-action detail.
Motion Pro 08-0247 Quick Action Valve Spring Compressor: who should not buy
Skip this compressor if your retainers are very large, because the tips may not fit. The OTC 4572 above is the better match for large retainers.
Motion Pro 08-0247 Quick Action Valve Spring Compressor: pair it with
Pair it with a magnet for the keepers and a valve lapping tool for the seats.
No verified standalone Amazon listing was found for this exact Motion Pro 08-0247 Quick Action Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
We may earn a commission at no cost to you.
Use the tip that fits the retainer, and never force the wrong tip; our best adjustable wrenches or pliers guide covers the hand tools that back it up.
Best For Small Engines: ABN 8-Inch Valve Spring Compressor
BEST FOR SMALL ENGINES
Why the ABN 8-Inch Valve Spring Compressor is our pick
The ABN 8-inch compressor is the pick for small and medium overhead valve engines, from a motorcycle to a mower. It is a C-clamp design with a 3-inch to 6.5-inch capacity and a 6-inch throat clearance, so it reaches the retainer on a small head without fighting the frame. For a home mechanic who works on bikes and small engines, it is the practical buy.
ABN 8-Inch Valve Spring Compressor key specs
- 8-inch valve spring compressor
- 3 to 6.5 inch capacity
- 6 inch throat clearance
- For small and medium overhead valve engines
- C-clamp design
- Check capacity before ordering
- Keep the screw threads greased
- Store dry to prevent rust
- Not for large car heads
- Inspect the frame before use
ABN 8-Inch Valve Spring Compressor: fits and best for
This compressor fits owners of small motorcycles, ATVs, and mowers, and anyone who services small overhead valve engines. It suits a small head where a large compressor cannot fit, because the 8-inch frame reaches the retainer without crowding the valves.
ABN 8-Inch Valve Spring Compressor pros and watch-outs
Pros
- Sized for small engines
- C-clamp design is simple
- Good throat clearance
- Low outlay for a first tool
- Works on bikes and mowers
Watch-outs
- No verified standalone Amazon listing for the exact compressor
- Not for large car heads
- C-clamp is slower than a lever
- Check the capacity before ordering
ABN 8-Inch Valve Spring Compressor: what owners report
Owners who mention this compressor in listing feedback most often praise the size, which fits small heads where a large tool cannot. A recurring watch-out is the capacity, with owners checking the head size before ordering. No verified standalone Amazon listing was found for this exact compressor, so the written alternative is the Orion Motor Tech Universal Valve Spring Compressor listing, a universal overhead valve spring remover and installer. See the Orion Motor Tech valve spring compressor listing and the Top5Best valve spring compressor guide for the small-engine detail.
ABN 8-Inch Valve Spring Compressor: who should not buy
Skip this compressor if your head is a large car head, because the capacity is too small. The OTC 4572 above is the better match for large heads.
ABN 8-Inch Valve Spring Compressor: pair it with
Pair it with a magnet for the keepers and a valve lapping tool.
No verified standalone Amazon listing was found for this exact ABN 8-Inch Valve Spring Compressor. Buy the Orion Motor Tech Universal Valve Spring Compressor instead:
We may earn a commission at no cost to you.
Measure the head before ordering, and grease the screw; see our top parts washers for automotive guide for cleaning the head first.
Spec comparison
| Product | Detail |
|---|---|
| Motion Pro T-6 Valve Spring Compressor 08-0641 | Key spec: Billet 6061 aluminium frame, quick-release straight press, all bike heads |
| Motion Pro T-6 Valve Spring Compressor 08-0641 | Best for: Best Overall |
| Motion Pro T-6 Valve Spring Compressor 08-0641 | Check Price |
| Orion Motor Tech Universal Valve Spring Compressor | Key spec: Universal OHV and OHC, remover and installer, valve stem tool |
| Orion Motor Tech Universal Valve Spring Compressor | Best for: Best Budget Kit |
| Orion Motor Tech Universal Valve Spring Compressor | Check Price |
| OTC 4572 Large Valve Spring Compressor | Key spec: Jaw range 1-3/8 to 5-5/8 inches, throat 5-7/8 inches, two adapters |
| OTC 4572 Large Valve Spring Compressor | Best for: Best For Bench Work |
| OTC 4572 Large Valve Spring Compressor | Check Price |
| Motion Pro 08-0247 Quick Action Valve Spring Compressor | Key spec: Quick-action design, cup and ball tips, one-hand compression |
| Motion Pro 08-0247 Quick Action Valve Spring Compressor | Best for: Best Quick Action |
| Motion Pro 08-0247 Quick Action Valve Spring Compressor | Check Price |
| ABN 8-Inch Valve Spring Compressor | Key spec: 8-inch C-clamp, 3 to 6.5 inch capacity, 6 inch throat |
| ABN 8-Inch Valve Spring Compressor | Best for: Best For Small Engines |
| ABN 8-Inch Valve Spring Compressor | Check Price |
Installation and setup basics
Compressing a valve spring is a bench job, and the setup matters more than the force. Start by removing the head from the bike if the tool needs bench access, then clean the head and mark each valve so it goes back in the same guide. Fit the compressor to the retainer with the tip that matches, press straight down, and hold the spring while you lift the keepers out with a magnet. Release the pressure slowly, lift the retainer and the spring off, and lay the parts out in order for each valve. When you refit, compress the spring, drop the keepers in with a magnet, and release slowly so they seat in the groove. For the head side of the job, our guides on top parts washers for automotive and best adjustable wrenches or pliers cover cleaning the head and the hand tools that back up valve work, and the best bottle jack for caravan guide covers safe lifting while the head is off.
Safety essentials
- Never compress a spring with your fingers near the retainer.
- Press straight down, never at an angle.
- Keep the keepers in a tray, they are tiny and easy to lose.
- Wear eye protection, a keeper can fly out under pressure.
- Release the pressure slowly, never let go suddenly.
- Check the valve for bends before refitting it.
A valve spring under compression stores energy, and a keeper that flies out can cause serious eye injury. Wear eye protection, press straight down on the retainer, and release the pressure slowly so the keepers seat in the groove instead of flying out. Keep your fingers clear of the retainer while the spring is compressed, and work over a tray so a dropped keeper does not roll away.
A bent valve will not seat, and a valve that does not seat will burn and fail. Check every valve for bends and pitting before you refit it, and check the guide for wear while the head is apart. If a valve is bent, replace it, and if the guide is worn, have the head serviced before you reassemble it.
Orion Motor Tech Universal Valve Spring Compressor
Motion Pro T-6 08-0641, written alternative Orion Motor Tech
OTC 4572, written alternative Orion Motor Tech
Troubleshooting
| Symptom | Cause | Fix |
|---|---|---|
| Keepers will not come out | Spring not compressed enough | Compress further and tap the retainer lightly with a magnet |
| Compressor will not fit the head | Tool too large for the head | Use a bike-specific compressor such as the T-6 |
| Valve bends during compression | Press applied at an angle | Reset the tool and press straight down |
| Spring will not compress | Wrong tip or seized retainer | Check the tip size and clean the retainer groove |
| Keepers fall into the engine | Head still on the engine | Work on the bench, keep a magnet handy, stuff the ports |
| Retainer will not seat on refitting | Keepers not in the groove | Compress again, seat the keepers with a magnet, release slowly |
Who should NOT buy these valve spring compressors
Owners who never open an engine. A valve spring compressor only helps when a cylinder head comes apart, so a rider who pays a shop for engine work does not need one. Spend the money on tyres or servicing instead, and read our best winch battery guide only if your roadside kit needs work.
Owners with one single valve job. One head service is cheaper at a shop than buying a compressor, and many shops will do the valve work while the head is off. Carry the head to a shop, and buy a tool only when the second job arrives.
Owners who will force a stuck keeper. A keeper that will not move is telling you the spring is not compressed enough or the retainer is dirty. Forcing it bends the valve, so compress further and clean the groove instead.
Owners with a damaged head. A compressor cannot fix a cracked head, a worn guide, or a bent valve. Have the head inspected first, and replace the damaged parts before you reassemble it.
Final verdict
Motion Pro T-6 Valve Spring Compressor 08-0641: the best motorcycle valve spring compressor for most owners.
Orion Motor Tech Universal Valve Spring Compressor: the best budget kit for cars, bikes, and small engines.
OTC 4572 Large Valve Spring Compressor: the best compressor for bench work on a head that is off the bike.
Motion Pro 08-0247 Quick Action Valve Spring Compressor: the best quick-action tool for Honda heads.
ABN 8-Inch Valve Spring Compressor: the best compressor for small engines.
FAQ
What is the best motorcycle valve spring compressor?
The Motion Pro T-6 08-0641 is the best choice for most owners, because its billet aluminium frame presses straight on the retainer, works on all motorcycle, ATV, and UTV heads, and uses a quick-release system that keeps side load off the valve. For a budget job, the Orion Motor Tech universal kit covers cars, bikes, and small engines in one box.
How do I use a valve spring compressor on a motorcycle?
Fit the compressor to the retainer with the tip that matches, press straight down to compress the spring, and lift the keepers out with a magnet. Release the pressure slowly, lift the retainer and spring off, and lay the parts out in order for each valve. On refitting, compress the spring, seat the keepers in the groove with a magnet, and release slowly.
Can I compress a valve spring with the head still on the bike?
Yes, with a compressor made for on-engine work, such as the Motion Pro T-6, which presses the retainer with the head in place. A C-clamp compressor needs the head off the bike and on the bench. Whichever you use, stuff the ports with rags so a dropped keeper cannot fall into the engine.
What size valve spring compressor do I need for a motorcycle?
Measure the distance from the head face to the retainer and the retainer diameter, then check the tool jaw range and tip size against both. The OTC 4572 covers a 1-3/8 to 5-5/8 inch jaw range, while the ABN 8-inch covers 3 to 6.5 inches. A tool that is too short cannot reach the retainer, so measure before you buy.
How do I remove valve keepers without losing them?
Compress the spring fully, tap the retainer lightly to free the keepers, and lift them out with a magnet. Work over a tray, keep the parts in order for each valve, and never let go of the spring suddenly, because a keeper can fly out. Stuff the intake and exhaust ports with rags so a dropped keeper cannot fall into the engine.
Do I need an adapter set for a valve spring compressor?
Often, yes, because retainers come in different sizes and the compressor tip must match the retainer. The Motion Pro T-6 takes an 18-millimetre and 28-millimetre adapter set, and the OTC 4572 includes two adapters. Check the adapter list for your bike before you order, and buy the adapters with the tool.
Can a valve spring compressor bend a valve?
Yes, if the press is applied at an angle, because side load bends the valve stem and jams the keepers. Always press straight down on the retainer, use the tip that fits, and stop if the tool feels crooked. The Motion Pro T-6 is built to press straight, which is why it leads this guide.
How do I know if my valves need replacing?
Check the valve face for pitting and burning, the stem for bends and wear, and the guide for play while the head is apart. A valve that does not seat, a stem that wobbles in the guide, or a face that is pitted should be replaced. A valve spring compressor cannot fix a worn valve, so inspect every part before you reassemble the head.
More in this field: best adjustable wrenches or pliers, top parts washers for automotive, best bottle jack for caravan, best heavy duty brake caliper tools video, best coolant testers battery, best 12000 lb winch, best atv winch, best jeep winch, best 10000 lb winch, best 4500 lb winch atv utv, best truck winch for the money, best snatch block for winching.
Sources
- Orion Motor Tech valve spring compressor listing
- Orion Motor Tech valve spring compressor listing
- Orion Motor Tech valve spring compressor listing
- Orion Motor Tech valve spring compressor listing
- Orion Motor Tech valve spring compressor listing
- Royal Distributing Motion Pro T-6 page
- MechanicAddicts valve spring compressor guide
- Top5Best valve spring compressor guide
- Valve spring compressor roundup
- Orion Motor Tech valve spring compressor listing
By Leo, Founder, WinchInsider
Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.
Related guides
- best adjustable wrenches or pliers
- top parts washers for automotive
- best bottle jack for caravan
- best heavy duty brake caliper tools video
- best coolant testers battery
- best 12000 lb winch
Top pick: Orion Motor Tech Universal Valve Spring Compressor