How we researched this guide
We compared five hitch steps for 2-inch receivers against their Amazon listing data and maker documents: Go Rhino specifications and instructions for the Dominator and HS-30, Bully fitment data for the BBS-1102, and listing specifications for the other two picks. Every ASIN here was verified on a listing page that prints it. Products with no verified ASIN were excluded.
For the Maverick side we checked Ford sources first: the 4K Tow Package receiver, the Ford Accessories receiver for 2022 to 2027 Mavericks, and CURT data for trucks without a factory hitch. Owner context came from Maverick Truck Club threads. We do not test hitch steps and we print no prices.
The 30-second answer
For most Maverick owners the Go Rhino Dominator D360T is the hitch step to buy, if your truck has the 2-inch receiver: it is the widest, most adjustable step here. The Go Rhino HS-30 is the compact step to store in the truck. The Bully BBS-1102 fits 1.25-inch and 2-inch receivers. The PM PERFORMOTOR 36.5-inch is the wide oval bar, and the POWERWORKS 24-inch is the flat toothed pad with a stated 220 lb listing capacity. No receiver, no step: check the fitment table first, then browse the Hitch Steps archive.
Top Pick: Best Wide Two-Tier Step
Go Rhino Dominator Hitch Step D360T
Best if you climb into the Maverick bed daily: a 36 in two-tier step with a 20 in rubberised top pad and a lower grated pad, three depth settings to clear the bumper, and an anti-rattle bracket in the box.
Best Compact Step to Store
Go Rhino HS-30 Rhino Hitch Step
Best if the step should live in the truck, not on it: a 12 in hex-tread step with an integrated handle that pulls out in seconds and stores under the seat or in the bed.
Best Classic Step, Dual-Size Fit
Bully BBS-1102 Hitch Step
Best if one step may move between vehicles: the BBS-1102 fits both 1.25 in and 2 in receivers, so it works in the Maverick 2 in receiver today and a smaller receiver later.
Best Wide Oval Bar
PM PERFORMOTOR 36.5-inch Hitch Step
Best if you want width without tiers: a 36.5 in oval bar with drop step pads at the doors of the bed, in black powder coat for a 2 in receiver.
Best Wide Flat Pad
POWERWORKS 24-inch Hitch Step
Best if you want one flat, toothed pad: about 24 in long and 6 in wide in forged carbon steel per its listing, with a stated 220 lb capacity and two length settings.
Quick compare: the five picks at a glance
| Product | Width | Step surface | Capacity | Check Price |
|---|---|---|---|---|
| Go Rhino Dominator D360T | 36 in | Two-tier, rubberised + grated | Not published | Check Price |
| Go Rhino HS-30 | 12 in | Moulded hex tread | Not published | Check Price |
| Bully BBS-1102 | 19 in class | Flat step pad | Not published | Check Price |
| PM PERFORMOTOR 36.5 in | 36.5 in | Oval bar, drop pads | 350 lb listing field | Check Price |
| POWERWORKS 24 in | About 24 in | Flat toothed pad | 220 lb per listing | Check Price |
Receiver fit: every pick fits a 2-inch receiver; the Bully BBS-1102 also fits 1.25-inch receivers per its family listing.
Capacity note: only two listings state any weight figure, and one is a pull-force field, not a standing rating. The receiver limit also applies: Ford guidance cited for the factory 4K receiver puts maximum tongue load at 400 lb. Never exceed the lowest limit.
Hitch step chooser for your Maverick
Tell us the main job, the heaviest person who will stand on the step, and the shape you prefer. Every result recommends one of the five picks in this guide, with its button. Every pick needs a 2-inch receiver on the truck.
How to choose a hitch step for a Ford Maverick
Start with the receiver, not the step
Every pick slides into a 2-inch receiver. A Maverick with the 4K Tow Package has one: Ford lists a Class III 2-inch receiver there. A Maverick without it may have no receiver at all. Check under the rear bumper before you shop.
Width decides how confident the step feels
The Maverick bed is short, so you step up at the tailgate and reach forward. A wide step, 24 inches or more, lets you place a foot, turn, and steady a load. A 12-inch step is a foothold, not a platform: fine occasionally, less kind with hands full or a wet pad.
Capacity: read the chain, not one number
A standing person loads step, receiver and truck in a chain, and the lowest rating governs. Only two listings here state a figure, and Ford guidance cited for the factory receiver puts maximum tongue load at 400 lb. One person, centred, no bouncing, never two people plus cargo.
Step surface and grip in bad weather
Moulded hex tread, rubberised pads, grated aluminium and raised teeth all aim at the same wet boot. Smooth painted steel is the surface to avoid: the step will be used in rain, frost and slush, not just on dry summer driveways.
Rattle, pins and locks
A loose step knocks over bumps and worries its pin hole over time. Prefer an anti-rattle bracket or add a tightener, use pin and clip every time, and consider a locking pin if the step lives on the truck. Our hitch locks archive covers the lock side, and the hitch receivers archive covers the receiver side.
Departure angle, sensors and the tailgate
The Maverick is a low, unibody truck. A long step hangs behind the bumper, can meet a steep driveway first, and sits in the rear sensor and camera zone. Test tailgate swing, sensors and camera after fitting, and remove a step that confuses the truck.
Ford Maverick receiver and towing data
The rows below are the fitment facts this guide stands on, each with its source in the row. The aftermarket-versus-Ford rating conflict is printed, not hidden.
| Configuration | Receiver | Tow rating | Source |
|---|---|---|---|
| Standard Maverick, properly equipped | Receiver depends on equipment; no step fits without one | 2,000 lb | Jalopnik 4K explainer |
| Maverick with 4K Tow Package | Class III 2-inch receiver, 4/7-pin | 4,000 lb with AWD | Ford Authority package list |
| Ford Accessories receiver, 2022-2027 Maverick | 2-inch, bolts in, no drilling | Vehicle powertrain limits apply | Ford Accessories |
| CURT 13504 receiver, 2022-2026 Maverick | Class 3, 2-inch, concealed | 4,000 lb GTW, 600 lb TW (CURT) | CURT data via Advance Auto |
| Factory 4K receiver tongue limit | 2-inch Class III | 400 lb max tongue load (Ford, cited) | TorqueNews citing Ford guide |
Read the last two rows together: CURT rates its hardware higher than Ford rates the truck. The truck wins. That lowest-limit rule is why our Maverick bed cover guide and receiver hitch mount guide both start with the receiver, not the accessory.
Hitch steps by budget
| Tier | What you get | Example pick |
|---|---|---|
| Lowest commitment | A compact step that stores in the truck | Go Rhino HS-30 |
| Classic mid tier | A flat step that fits two receiver sizes | Bully BBS-1102 |
| Wide flat pad | One toothed pad with a stated capacity | POWERWORKS 24-inch |
| Wide bar | An oval bar across the back of the bed | PM PERFORMOTOR 36.5-inch |
| Widest, most adjustable | Two tiers, three depths, anti-rattle kit | Go Rhino Dominator D360T |
Types of hitch steps
| Type | Pros | Cons | Best for |
|---|---|---|---|
| Wide two-tier bar | Widest footing, two heights | Hangs widest behind bumper | Daily bed access: Dominator |
| Compact single step | Stores in truck, quick in and out | A foothold, not a platform | Occasional use: HS-30 |
| Flat pad / oval bar | Simple, one-level footing | No second tier | Steady one-step climbs: POWERWORKS, PM |
Detailed reviews: the five picks in full
Each review follows the same pattern: why it earned its award, listing specs with conflicts printed, Maverick fit, watch-outs, and paraphrased owner reports.
Top Pick: Go Rhino Dominator Hitch Step D360T
Top Pick: Best Wide Two-Tier Step, for daily Maverick bed access
Why the Go Rhino Dominator Hitch Step D360T is our pick
It solves the Maverick bed problem best: step up, turn, and work from the tailgate. Its 36-inch two-tier bar gives a wide rubberised top pad, a lower grated foothold, and three shaft positions for bumper clearance.
Go Rhino Dominator Hitch Step D360T key specs
- Part number: D360T
- Receiver fit: 2-inch
- Length: 36 in
- Design: two-tiered hitch step
- Lower step: 3 in drop
- Top pad: 20 in rubberised step pad
- Bottom pad: removable grated aluminium step pad
- Depth settings: 3 hitch shaft positions
- Construction conflict: Amazon table says mild steel; maker text on same listing says 0.065 in tubular stainless steel
- Finish: textured black powder coat
- Item weight: 11 lb
- In the box: step, hitch pin and clip, anti-rattle bracket and knob, end caps, storage bag
- Warranty: 5-year on textured black finish per Go Rhino promise on listing
- Standing capacity: Not published
Go Rhino Dominator Hitch Step D360T: fits and best for
Mavericks with a 2-inch receiver whose owners climb into the bed most days. The width helps when you step up carrying something, because your free foot has somewhere to land. Pair it with our truck bed cover guide.
Go Rhino Dominator Hitch Step D360T pros and watch-outs
- Widest footing in this guide, with two step heights
- Three depth positions clear the Maverick bumper
- Anti-rattle bracket, pin, clip and storage bag included
- Lower grated pad removes for cleaning
- Standing capacity is Not published
- Listing contradicts itself on steel type; both versions printed
- 36 inches of steel behind a compact truck is noticeable when parking
- Lockable only with a hitch lock sold separately
Go Rhino Dominator Hitch Step D360T: what owners report
Owner coverage for the Dominator family, reflected in Go Rhino material and its installation instructions, centres on two points: the anti-rattle knob makes a wide step livable, and depth settings matter because receivers sit at different distances from bumpers. Maverick-specific reports are thin, and we say so.
Go Rhino Dominator Hitch Step D360T: who should not buy
Your Maverick has no 2-inch receiver, you need a published standing capacity, or you park in tight spaces where a wide bar is a liability. Fit a receiver first, or take the POWERWORKS below for its stated figure.
Go Rhino Dominator Hitch Step D360T: pair it with
Pair it with a locking hitch pin from our hitch locks archive if it lives on the truck, and with the cargo organisation in our cargo baskets archive for camping.
We may earn a commission at no cost to you. Fits a 2-inch receiver. Confirm your Maverick has one before ordering.
Set depth so your foot centres on the top pad with your toe clearing the bumper, tighten the anti-rattle knob, and re-check after the first drive. More discipline lives in our hitch mount guide.
Best Compact: Go Rhino HS-30 Rhino Hitch Step
Best Compact Step to Store, for occasional bed and roof-height jobs
Why the Go Rhino HS-30 Rhino Hitch Step is our pick
It is the step for owners who want nothing living behind the truck: twelve inches of hex tread with an integrated handle. Slide it in for a foothold at the tailgate, pull it out, and store it in the cab or bed.
Go Rhino HS-30 Rhino Hitch Step key specs
- Part number: HS3012T
- Receiver fit: 2-inch
- Length: 12 in
- Step pad: injection-moulded hex tread
- Handle: integrated
- Construction conflict: title says mild steel; spec field says stainless steel
- Finish: textured black powder coat
- In the box: hitch step
- Warranty: 5-year per manufacturer warranty description on listing
- Standing capacity: Not published
- Item weight: Not reliably published (listing field reads 16 ounces, which is inconsistent with a steel step)
Go Rhino HS-30 Rhino Hitch Step: fits and best for
Maverick owners who need a step a few times a month: loading a cooler, reaching the middle of the bed, or reaching the rear of the cab roof to wash it. It also suits tight garages, because nothing protrudes when stored.
Go Rhino HS-30 Rhino Hitch Step pros and watch-outs
- Smallest and easiest step here to remove and store
- Hex tread pad is moulded for grip in wet weather
- Integrated handle makes one-handed fitting realistic
- Backed by a stated 5-year warranty description
- A 12-inch foothold is not a platform for working from
- Standing capacity is Not published
- Material fields on the listing conflict with each other
- No anti-rattle device is listed in the box
Go Rhino HS-30 Rhino Hitch Step: what owners report
Go Rhino positions the HS-30 around storage and grip, and owner themes follow that: compact steps get used because they are in the truck, not left in a garage. The recurring caution is width: owners stepping up with both hands full prefer a wide bar. That is why this is our compact pick, not our top pick.
Go Rhino HS-30 Rhino Hitch Step: who should not buy
You climb into the bed daily, carry loads up the step, or want to stand and work at the tailgate. Take the Dominator. The HS-30 is a foothold for moments, not a workstation.
Go Rhino HS-30 Rhino Hitch Step: pair it with
Pair it with the bed organisation in our cargo organisers archive so the step, straps and small kit live in one place, and see our tire inflator and gauge guide from today wave for the other small kit that belongs in a Maverick.
We may earn a commission at no cost to you. Fits a 2-inch receiver. Confirm your Maverick has one before ordering.
Store it wrapped in an old towel or its bag: a loose steel step sliding in a Maverick bed will announce itself on every corner and chip its own powder coat. The same store-it-secured rule runs through our rolling tool cart alternatives guide.
Best Classic: Bully BBS-1102 Hitch Step
Best Classic Step, for owners who may move it between vehicles
Why the Bully BBS-1102 Hitch Step is our pick
The BBS-1102 earns its place on flexibility: its family listing states it fits both 1.25-inch and 2-inch receivers, so one step works in the Maverick and in a smaller household vehicle. It is a compact flat pad on a receiver tube, in black powder coat.
Bully BBS-1102 Hitch Step key specs
- Part number: BBS-1102
- OEM part number: BBS-1102
- UPC: 757558274017
- Receiver fit: 1.25-inch and 2-inch per family listing
- Dimensions: 19 x 11.25 x 3.75 in
- Item weight: 5.4 lb
- Finish: powder coated, black
- Construction conflict: Amazon table material field says plastic; selected variant name says powder coated stainless steel
- Fit type: universal fit per listing
- Standing capacity: Not published
- Warranty: Not published in the listing evidence
Bully BBS-1102 Hitch Step: fits and best for
Households with a Maverick plus a smaller 1.25-inch-receiver vehicle, and owners who want a simple flat step without tiers. On the Maverick it is a one-foot step at the tailgate centre, best for access rather than standing work.
Bully BBS-1102 Hitch Step pros and watch-outs
- Only pick that fits both 1.25-inch and 2-inch receivers
- Light at 5.4 lb, so fitting and removing it is easy
- Compact dimensions keep rear overhang small
- Long-running Bully part with a printed UPC and part number
- Listing contradicts itself on material; we print both versions
- Standing capacity and warranty are Not published in the evidence
- The Amazon page is a combined family listing whose title names the LED variant, so check the variant before ordering
- Narrower footing than the wide picks
Bully BBS-1102 Hitch Step: what owners report
Bully lists the BBS-1102 across its hitch accessories range and its hitch step pages, and the owner theme for this class is consistency: a simple pad that is there when the tailgate is down. Maverick-specific reports for the BBS-1102 are thin: this pick stands on fit flexibility and printed dimensions.
Bully BBS-1102 Hitch Step: who should not buy
You want the widest or most confidence-inspiring footing, or a published capacity and warranty before you buy. The Dominator gives the footing; the POWERWORKS gives the stated capacity figure.
Bully BBS-1102 Hitch Step: pair it with
Pair it with a receiver cover when the step is off, and with the receiver basics in our trailer hitches archive if the same receiver also tows.
We may earn a commission at no cost to you. Selected variant on the listing is BBS-1102. Fits 1.25-inch and 2-inch receivers per the family listing.
Confirm the tube is fully seated and pinned in the Maverick 2-inch receiver before anyone steps on it; a dual-size fit is only safe when it is not loose. Our running boards guide makes the same seated-and-pinned point for side steps.
Best Wide Oval: PM PERFORMOTOR 36.5-inch Hitch Step
Best Wide Oval Bar, for a one-level wide step at the tailgate
Why the PM PERFORMOTOR 36.5-inch Hitch Step is our pick
Some owners want width without tiers. This 36.5-inch oval bar puts drop step pads across the back of the truck on one level, in black powder coat, for a 2-inch receiver: the wide, simple alternative to the Dominator.
PM PERFORMOTOR 36.5-inch Hitch Step key specs
- Receiver fit: 2-inch
- Width: 36.5 in
- Design: oval bar with drop step pads
- Product name construction: oval steel
- Material field conflict: listing Features field says aluminium
- Finish: powder coated, black
- Listing pull-force field: 350 lb (a listing field, not a certified standing-step rating)
- Listing maximum towing capacity field: 350 lb
- Fit type: universal fit per listing
- Warranty description on listing: 30-day refund or replacement
- Standing capacity as a step rating: Not published as such
PM PERFORMOTOR 36.5-inch Hitch Step: fits and best for
Maverick owners who want a wide target at the tailgate for loading and unloading rather than standing work. The one-level layout suits owners who dislike a lower tier catching on driveways or clothing.
PM PERFORMOTOR 36.5-inch Hitch Step pros and watch-outs
- 36.5 inches wide, the joint-widest footing here
- One-level design is simple to use and to clean
- Drop pads sit at the natural stepping points
- Black powder coat matches the Maverick rear trim
- The only weight figure is a pull-force listing field, not a step rating
- Listing contradicts itself on material: steel in the name, aluminium in a field
- Warranty description on the listing is only a 30-day refund or replacement
- Brand support and manuals are thinner than Go Rhino or Bully
PM PERFORMOTOR 36.5-inch Hitch Step: what owners report
Owner coverage for this exact bar is thin, and we say so plainly: the pick stands on its printed width, receiver fit and pad layout. The general wide-bar theme is that width gets used daily. Treat the 350 lb figure as a listing field only.
PM PERFORMOTOR 36.5-inch Hitch Step: who should not buy
You need a maker-published standing capacity, a multi-year warranty, or a step to stand and work from. The POWERWORKS states a capacity; the Dominator is the working platform.
PM PERFORMOTOR 36.5-inch Hitch Step: pair it with
Pair it with the bed protection in our camping bed cover guide if the wide step is for camp loading, and with our cargo roof rack guide only if your Maverick actually carries a rack system.
We may earn a commission at no cost to you. Fits a 2-inch receiver. The 350 lb figure is a listing pull-force field, not a step rating.
Check pad tightness and the pin after the first week. Wide bars give a loose fitting more leverage to knock, and the fix is a tightener or a re-seated pin, not ignoring it. See the rattle rows in the troubleshooting table below.
Best Flat Pad: POWERWORKS 24-inch Hitch Step
Best Wide Flat Pad, for one toothed platform with a stated capacity
Why the POWERWORKS 24-inch Hitch Step is our pick
It is the only pick whose listing states a weight capacity plainly: 220 lb. A single flat pad, about 24 by 6 inches, with anti-skid teeth, in high-strength solid carbon steel per its listing, with two length settings.
POWERWORKS 24-inch Hitch Step key specs
- Manufacturer part number: PW-165-9
- Receiver fit: 2-inch
- Step pad: 61 cm long x 15 cm wide (about 24 x 6 in)
- Capacity: 220 lb per listing
- Construction: high-strength solid carbon steel forging per listing
- Step surface: anti-skid teeth
- Length adjustment: 2 holes
- Hitch hole: 1/2 in per listing
- Package: 1 hitch step
- Warranty: Not published in the listing evidence
POWERWORKS 24-inch Hitch Step: fits and best for
Lighter users who want a single flat platform rather than a bar or tiers, and who prefer a stated capacity figure, even a modest one, over a stronger-looking step that publishes nothing. It suits tailgate access for loading and reaching the front of the bed.
POWERWORKS 24-inch Hitch Step pros and watch-outs
- Only pick with a plainly stated capacity: 220 lb per listing
- Wide flat pad, about 24 by 6 inches, with anti-skid teeth
- Two length settings help position it at the bumper
- Forged carbon steel construction per its listing
- 220 lb is the lowest stated figure here and rules out heavier users
- Warranty is Not published in the evidence
- Brand documentation is thinner than the established names
- A single pad centres the step; no footing at the bed corners
POWERWORKS 24-inch Hitch Step: what owners report
Owner coverage for this exact step is thin, and we say so rather than inventing a consensus. The listing itself is the evidence: pad dimensions, the 220 lb figure and the toothed surface are printed there. For Maverick owner context on receiver loads, the Maverick Truck Club tongue-weight discussion is the useful read: owners there work through why the truck limit, not the hardware number, governs.
POWERWORKS 24-inch Hitch Step: who should not buy
You weigh more than the stated 220 lb figure allows once boots and a carried load are counted, or you want footing across the whole tailgate. Heavier users and daily workers belong on the Dominator, with the receiver limit in mind.
POWERWORKS 24-inch Hitch Step: pair it with
Pair it with a hitch tightener if the two-hole fit leaves play, and with the small-load organisation in our rooftop cargo box guide if the step is mainly for loading height.
We may earn a commission at no cost to you. Fits a 2-inch receiver. Stated capacity is 220 lb per its listing.
Count honestly against the 220 lb figure: body weight plus boots plus whatever is in your arms is the load. If the total is close, choose a different pick instead of hoping the figure is conservative.
Spec comparison: all five picks side by side
| Product | Width | Design | Surface | Stated figure |
|---|---|---|---|---|
| Dominator D360T | 36 in | Two-tier | Rubber + grated | Not published |
| HS-30 | 12 in | Compact | Hex tread | Not published |
| Bully BBS-1102 | 19 in class | Flat step | Flat pad | Not published |
| PM PERFORMOTOR | 36.5 in | Oval bar | Drop pads | 350 lb field |
| POWERWORKS | About 24 in | Flat pad | Anti-skid teeth | 220 lb |
| Product | Check Price |
|---|---|
| Dominator D360T | Check Price |
| HS-30 | Check Price |
| Bully BBS-1102 | Check Price |
| PM PERFORMOTOR | Check Price |
| POWERWORKS | Check Price |
No score row: a single number would hide what decides this category: whether the truck has a receiver, how wide a footing you need, and whether any capacity figure is actually published.
Fitment & installation
Fitting is the simplest job in this guide, and the Maverick adds one check first: confirm the receiver exists. Trucks without one need a receiver first: Ford Accessories sells a 2-inch receiver for 2022 to 2027 Mavericks that bolts into existing holes, and CURT makes a Maverick-specific Class 3 receiver. Our hitch receivers archive and Truck Accessories archive organise those parts. With a receiver present, slide the step in, choose the depth hole that centres your foot on the pad with your toe clearing the bumper, fit the pin and clip, and tighten any anti-rattle device. Then check three Maverick-specific things: tailgate clearance, rear camera view, and parking sensors tested at walking pace in an empty space. If a sensor complains constantly, remove the step when not needed, which is what the compact HS-30 is designed for. Re-check the pin and knob after the first drive, the same first-week discipline our install guide applies to any bolted truck hardware.
Safety essentials
One person, centred, no bouncing. A hitch step is a foothold, not a platform or a trampoline.
Respect the lowest limit. Step figure, receiver rating and Ford vehicle guidance all apply; the smallest number governs.
Pin and clip every time. An unpinned step can walk out of the receiver in transit.
Dry, clean pads grip. Clear mud, ice and grit from the pad before you trust it with a load in your arms.
Watch the tailgate and sensors. Confirm clearance and sensor behaviour after fitting, before relying on either.
Remove a damaged step. A bent tube or cracked pad is retired, not straightened and reused.
Three safety-relevant picks, with buttons: the Dominator (anti-rattle bracket), the HS-30 (removing it removes the hazard), and the Bully (light, easy removal).
Lock and receiver context: hitch locks, hitch balls and electric truck winch guide for owners whose receiver does more than carry a step.
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Step rattles over bumps | Pin play, no tightener | Fit anti-rattle bracket or tightener |
| Step sits too close to bumper | Wrong depth hole | Use a different shaft position |
| Foot slips when wet | Mud or ice on pad | Clean pad, wear treaded boots |
| Tailgate touches step | Step set too high or deep | Reset depth, retest tailgate swing |
| Sensors beep constantly | Step in sensor zone | Remove step when not in use |
| Pin will not line up | Debris in receiver | Clean receiver tube, inspect holes |
Who should NOT buy these
Owners with no receiver. If your Maverick has no 2-inch receiver, a hitch step is the second purchase, not the first. Fit the Ford or CURT receiver in the fitment section first.
Anyone over a stated figure. If you plus boots and load pass 220 lb, the POWERWORKS is not your step, and no unpublished figure on another step should be read as permission.
Owners who tow weekly. The step occupies the receiver your trailer needs. A compact removable step like the HS-30, or no hitch step at all, fits a towing life better. See our bed swing case guide for storage that leaves the receiver free.
Anyone wanting a work platform. Standing to work for minutes at a time belongs on a rated platform or in the bed itself, not on any hitch step in this guide.
Final verdict
Top Pick: Go Rhino Dominator Hitch Step D360T — Check its price
Best Compact Step to Store: Go Rhino HS-30 Rhino Hitch Step — Check its price
Best Classic Step, Dual-Size Fit: Bully BBS-1102 Hitch Step — Check its price
Best Wide Oval Bar: PM PERFORMOTOR 36.5-inch Hitch Step — Check its price
Best Wide Flat Pad: POWERWORKS 24-inch Hitch Step — Check its price
FAQ
Does every Ford Maverick have a 2-inch hitch receiver?
No. The 4K Tow Package includes a Class III 2-inch receiver, and Ford Accessories sells a 2-inch receiver for 2022 to 2027 Mavericks, but a Maverick can have no receiver at all. Look under the rear bumper before buying any hitch step in this guide.
Will a hitch step fit a Maverick with the 4K Tow Package?
Yes, if it fits a 2-inch receiver, which every pick here does. The 4K package receiver is a Class III 2-inch receiver with 4-pin and 7-pin connectors. Fit the step with its pin and clip, set a depth that centres your foot, then check tailgate clearance, camera view and sensor behaviour.
How much weight can a hitch step hold on a Maverick?
Only as much as the lowest limit in the chain. One pick here states 220 lb, most publish no standing figure, and Ford guidance cited for the factory receiver puts maximum tongue load at 400 lb. One person, centred, with no bouncing, is the rule for every step.
Can I tow with a hitch step fitted?
No. The step occupies the receiver and is not a towing device. Remove it and fit proper towing hardware from the trailer hitches archive before towing anything. Never tow from a step, its pin, or its tube. The same receiver tows only with proper hardware fitted, within the truck rating.
Will a hitch step set off Maverick parking sensors?
It can. A step sits directly in the rear sensor and camera zone of a compact truck. Test at walking pace in an empty space after fitting, and check the camera view too. If the alerts are constant, choose a compact step you remove between uses, like the HS-30.
Does a hitch step stop bumper damage?
A wide steel step can take a light parking nudge, but it is not crash protection, and a step that has taken a real impact should be retired if bent or cracked. Do not straighten and reuse a bent tube or cracked pad: check the pin and receiver after any nudge.
How do I stop a hitch step rattling?
Use the anti-rattle bracket if the step includes one, as the Dominator does, or add a tightener. A loose step knocks over bumps and can worry its pin hole over time, so use the pin and clip every time. Re-check tightness after the first drive and first wash.
Can I leave a hitch step on all year?
You can, with care: keep the pad clean, the pin locked or clipped, and chips touched up against road salt. Clear mud, ice and grit from the pad before use, because clean, dry pads grip. Many owners remove the step in winter or when towing.
What if my Maverick has a 1.25-inch receiver?
Factory and Maverick-specific aftermarket receivers in our research are 2-inch, so a 1.25-inch receiver on a Maverick is unusual. If yours truly is 1.25-inch, the Bully BBS-1102 is the pick here whose family listing states it fits both 1.25-inch and 2-inch receivers. Confirm it is fully seated and pinned before use.
Sources & changelog
Manufacturer and vehicle sources: Ford Accessories Maverick 2-inch receiver; Ford Authority on the 4K Tow Package; Jalopnik 4K explainer; CURT 13504 data; Bully hitch accessories; Go Rhino installation instructions.
Owner and secondary sources: Maverick Truck Club tongue-weight discussion; TorqueNews on the Ford 400 lb tongue figure; BestReviews hitch step roundup. Product specs are from the Amazon listings linked by each button, checked October 22, 2026.
Changelog — October 22, 2026: guide first published.
By Leo, Founder, WinchInsider
Leo researches truck gear from maker documents, manuals and owner reports, and writes the guides he would want before spending his own money.
Related guides
- Hitch Steps archive
- Best truck bed cover for Ford Maverick
- Hitch locks archive
- Hitch receivers archive
- Best receiver hitch winch mount
- Best truck running boards