Best Automotive Heat Shield Tape

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This comes at no extra cost to you.

Best Automotive Heat Shield Tape

Your intake pipe sits inches from the exhaust manifold, and the heat soak after a hot run is cooking the air your engine breathes. A strip of reflective tape is the cheapest fix in the engine bay, if you buy tape that can take the heat.

Heat shield tape is a simple product with a simple job: reflect radiant heat away from the part it covers. The five tapes below are all adhesive-backed and made for automotive heat, led by DEI Reflect-A-Gold, which reflects up to 80 percent of radiant heat in maker testing.

30-second answer

The DEI Reflect-A-Gold Tape 10396, 2 inch by 15 ft, is the best automotive heat shield tape for most owners. It is a metalized polyamide tape laminated to glass fiber cloth, it reflects up to 80 percent of radiant heat per the maker, and it sticks to intake pipes, airboxes, and firewalls. Buy the Thermo-Tec 13575 sheet instead when you need to cover a flat panel, and buy the DEI 10397 roll instead when you need 30 ft of tape for a long run.

How we researched this guide

We compared published maker specifications, tape widths, lengths, heat ratings, and backing materials for 10 heat shield tapes, then shortlisted 5 with a stated heat rating and an adhesive backing. Every figure in this guide is the maker’s published number, and where a tape gave only a radiant-heat figure we say so instead of treating it as a continuous-use temperature.

BEST OVERALL

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft

This tape fits owners who want to protect an intake pipe, fuel lines, or an airbox from engine bay heat with a tape that has a stated reflection figure.

Check Price

BEST SHEET

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch

This sheet fits owners who need to shield a flat panel, a firewall, an airbox, or a floor from radiant heat with a single adhesive-backed piece.

Check Price

BEST LONG ROLL

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft

This tape fits owners with a long intake run or several hoses to wrap, who need twice the tape of the standard roll.

Check Price

BEST SMALL SHEET

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch

This sheet fits owners who need to shield one flat panel, a firewall patch, or an airbox lid with a single adhesive-backed piece.

Check Price

BEST BUDGET

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold

This tape fits owners who need a budget gold tape for hose and intake protection on a tight budget.

Check Price

ProductKey specsCheck Price
DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft2 inch by 15 ft, reflects up to 80 percent radiant heat, adhesive backedCheck Price
Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch12 by 24 inch sheet, adhesive backed, radiant heat to 2000 degrees FCheck Price
DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft2 inch by 30 ft, reflects up to 80 percent radiant heat, adhesive backedCheck Price
DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch12 by 24 inch sheet, adhesive backed, reflects up to 80 percent radiant heatCheck Price
FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold2 inch by 15 ft, gold aluminum foil, fiberglass backed, self-adhesiveCheck Price

Heat shield tape picker

Pick the part you are protecting and the shape of the surface. The picker matches a tape whose width and form suit the job.

Which option matches your job?

Tape never fixes a missing heat shield. If the part sits against the exhaust, add a shield or move the part, and use tape as the second layer, not the only one.


How to choose a heat shield tape that stays stuck in the heat

A heat shield tape fails in two ways: it peels off, or it cannot take the heat. Work through these six points before you buy, and the tape you pick will stay stuck and keep reflecting heat for years.

Read the heat rating, not just the color

Gold tape looks the same from brand to brand, but the heat rating does not. DEI Reflect-A-Gold reflects up to 80 percent of radiant heat, while a cheap aluminum tape may only handle a fraction of that. Check whether the number is a radiant-heat reflection figure or a continuous-use temperature, because they are not the same thing.

Match the width to the part

A 2-inch tape wraps a hose or an intake pipe in one pass, while a 12-inch sheet covers a firewall or an airbox without seams. Buying a wide sheet for a narrow hose wastes tape and leaves edges that peel, and buying a narrow tape for a flat panel leaves seams that let heat through. Measure the part first.

Prepare the surface before you stick

Heat shield tape sticks to a clean, dry, grease-free surface, and it peels from an oily one. Wipe the part with a degreaser, then with isopropyl alcohol, and let it dry fully before you apply the tape. A tape that peels in a week was almost always applied to a dirty surface.

Wrap with overlap, not gaps

Wrap a hose with a half-width overlap, so no bare surface shows between turns. A gap in the tape is a gap in the shield, and heat finds every gap. Press each turn down firmly, and run a roller or a cloth over the tape to push out air bubbles.

Check the adhesive temperature

The adhesive is the weak point of any heat shield tape, because it must hold while the tape gets hot. DEI uses a high-temperature pressure-sensitive adhesive made for extreme temperature swings, which is why it stays stuck where a cheap tape peels. If the maker does not name the adhesive, assume it is ordinary and keep the tape away from the hottest parts.

Know where tape does not belong

Heat shield tape belongs on intake pipes, airboxes, fuel lines, and firewalls. It does not belong on an exhaust pipe itself, where the temperature is far higher than any tape can take. For exhaust heat, use a wrap or a shield made for that job, and keep tape on the parts that need protection from the exhaust.

Best by budget

TierWhat you getExample pick
BudgetA gold foil tape for hoses and intake pipes, 2 inch by 15 ftFIREWESS Aluminum Foil Heat Shield Tape
Mid-rangeA gold reflective tape with a stated 80 percent reflection figureDEI Reflect-A-Gold Tape 10396
PremiumA professional adhesive-backed barrier sheet for flat panelsThermo-Tec 13575 Adhesive Backed Heat Barrier

Types of heat shield tapes by job

Heat shield tapes split by form. Pick the form first, then the brand.

TypeWhat it isBest for
Gold reflective tapeMetalized polyamide on glass fiber, 2 inch rollsIntake pipes, hoses, and fuel lines
Adhesive barrier sheetAluminized sheet, 12 by 24 inch, sticks to flat panelsFirewalls, airboxes, and floors
Long roll tape2 inch by 30 ft roll for long runsFull intake runs and multiple hoses
Budget foil tapeAluminum foil tape, lower heat ratingLight-duty hose protection

Detailed reviews

Each pick below gets a full review, with its key specs, owner feedback, and who should skip it.

Best Overall: DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft

BEST OVERALL

Why the DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft is our pick

The DEI Reflect-A-Gold Tape 10396 is the heat shield tape most engine bays end up with, because it does the job with a published number behind it. The maker states it reflects up to 80 percent of radiant heat, and the metalized polyamide layer laminated to glass fiber cloth takes the temperature swings of an engine bay without cracking. A 2-inch by 15-ft roll covers an intake pipe and a few hoses in one buy.

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft key specs

  • Part number 10396
  • Size 2 inch by 15 ft
  • Reflects up to 80 percent radiant heat per maker
  • Metalized polyamide on glass fiber cloth
  • High-temperature pressure-sensitive adhesive
  • For intake pipes, airboxes, and firewalls
  • Made in America per maker
  • Cut to length with scissors
  • Press firmly after applying

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft: fits and best for

This tape fits owners who want to protect an intake pipe, fuel lines, or an airbox from engine bay heat with a tape that has a stated reflection figure.

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft pros and watch-outs

Pros

  • Reflects up to 80 percent radiant heat
  • Glass fiber cloth takes heat cycling
  • Adhesive made for temperature swings
  • 2-inch width wraps hoses in one pass
  • Made in America per maker

Watch-outs

  • Costs more than plain aluminum tape
  • Needs a clean surface or it peels
  • Not for exhaust pipes
  • 15 ft runs out fast on a long intake

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft: what owners report

Owners who mention this tape in roundup feedback most often praise the adhesion, because it stays stuck where cheaper tapes peel after the first hot run. See the DEI Reflect-A-Gold 10396 listing and the Brazetools heat shield roundup for the reflection figure.

A recurring watch-out is the cost: buyers say the roll is short for the price, and a long intake needs two rolls. That is a fair warning, and it is why we list the 30-ft roll in this guide for longer runs.

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft: who should not buy

Skip this tape if you need to cover a flat firewall, because a roll is the wrong form. Buy the Thermo-Tec sheet instead.

DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft: pair it with

Pair it with a degreaser and isopropyl alcohol, so the surface is clean enough for the adhesive to hold.

Check Price

We may earn a commission at no cost to you.

Wrap with a half-width overlap, so no bare surface shows between turns. See our guide on best heavy duty off road jacks website for more on this.

Best Sheet: Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch

BEST SHEET

Why the Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch is our pick

The Thermo-Tec 13575 is the heat shield for flat panels, because a sheet covers a firewall or an airbox in one piece with no seams. The maker rates its radiant-heat tolerance at up to 2000 degrees F, and the adhesive backing bonds directly to the panel, which is why it is the professional choice for engine bays, generator enclosures, and any flat surface that faces heat.

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch key specs

  • Part number 13575
  • Size 12 inch by 24 inch
  • Adhesive backed aluminized barrier
  • Radiant heat tolerance to 2000 degrees F per maker
  • For firewalls, hoods, doors, and floors
  • Cut to any shape with scissors
  • Peel and stick application
  • Woven silica barrier with aluminized finish

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch: fits and best for

This sheet fits owners who need to shield a flat panel, a firewall, an airbox, or a floor from radiant heat with a single adhesive-backed piece.

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch pros and watch-outs

Pros

  • Covers a flat panel in one piece
  • Radiant tolerance to 2000 degrees F per maker
  • Adhesive bonds directly to the panel
  • Cut to any shape with scissors
  • No seams for heat to leak through

Watch-outs

  • Wrong form for wrapping a hose
  • One sheet covers only 288 square inches
  • Costs more than a roll of tape
  • Needs a flat, clean surface

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch: what owners report

Owners who mention this sheet in roundup feedback most often praise the adhesive, because it bonds to a firewall and stays put through heat cycles. See the Thermo-Tec 13575 listing and the NerdTechy heat shield roundup for the heat rating.

A recurring watch-out is the size: buyers say one sheet is small for a full firewall, and a big panel needs two sheets. Measure the panel first, because a sheet that is too small leaves bare edges where heat gets through.

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch: who should not buy

Skip this sheet if you need to wrap a hose or a pipe, because a flat sheet cannot wrap a curve. Buy the DEI tape roll instead.

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inch: pair it with

Pair it with a roller, so the sheet presses down fully with no air trapped underneath.

Check Price

We may earn a commission at no cost to you.

Cut the sheet a little large, then trim the edges after it is stuck down. See our guide on underbody protection reviews for trucks for more on this.

Best Long Roll: DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft

BEST LONG ROLL

Why the DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft is our pick

The DEI Reflect-A-Gold Tape 10397 is the same tape as the 10396, in a 30-ft roll for owners who need more of it. A long intake run, a set of fuel lines, and a few hoses can eat a 15-ft roll before the job is half done, and the 30-ft roll means one buy covers the whole engine bay. The reflection figure and the adhesive are the same, so the choice is only about length.

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft key specs

  • Part number 10397
  • Size 2 inch by 30 ft
  • Reflects up to 80 percent radiant heat per maker
  • Metalized polyamide on glass fiber cloth
  • High-temperature pressure-sensitive adhesive
  • For long intake runs and multiple hoses
  • Made in America per maker
  • Cut to length with scissors
  • Press firmly after applying

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft: fits and best for

This tape fits owners with a long intake run or several hoses to wrap, who need twice the tape of the standard roll.

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft pros and watch-outs

Pros

  • 30 ft covers a whole engine bay
  • Same 80 percent reflection figure
  • Same high-temperature adhesive
  • 2-inch width wraps hoses in one pass
  • Made in America per maker

Watch-outs

  • Costs more than the 15-ft roll
  • A long roll is easy to waste
  • Needs a clean surface or it peels
  • Not for exhaust pipes

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft: what owners report

Owners who mention this roll in listing feedback most often praise the length, because one roll finally covers the intake, the fuel lines, and the hoses without a second order. See the DEI Reflect-A-Gold 10397 listing for the roll size.

A recurring watch-out is waste: buyers say a long roll is easy to cut too long and throw away. Measure each run before you cut, and the roll will cover more jobs than you expect.

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft: who should not buy

Skip this roll if you only need to wrap one short hose, because 30 ft will sit on the shelf for years. Buy the 15-ft roll instead.

DEI Reflect-A-Gold Tape 10397 2 inch by 30 ft: pair it with

Pair it with a sharp pair of scissors and a cloth, so every cut is clean and every turn presses down flat.

Check Price

We may earn a commission at no cost to you.

Measure each hose before you cut, and add a little extra for the overlap. See our guide on how to use a winch for more on this.

Best Small Sheet: DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch

BEST SMALL SHEET

Why the DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch is our pick

The DEI Reflect-A-Gold Sheet 10392 is the small-sheet version of the same gold tape, made for a firewall patch or an airbox lid. It gives the same 80 percent reflection figure in a form that covers a flat panel in one piece, and it is the right buy when a roll would leave seams across the panel. For a single patch, it is cheaper than a full roll.

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch key specs

  • Part number 10392
  • Size 12 inch by 24 inch
  • Reflects up to 80 percent radiant heat per maker
  • Metalized polyamide on glass fiber cloth
  • High-temperature pressure-sensitive adhesive
  • For firewalls, airboxes, and small panels
  • Made in America per maker
  • Cut to any shape with scissors
  • Press firmly after applying

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch: fits and best for

This sheet fits owners who need to shield one flat panel, a firewall patch, or an airbox lid with a single adhesive-backed piece.

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch pros and watch-outs

Pros

  • Covers a flat panel in one piece
  • Same 80 percent reflection figure
  • Cheaper than a full roll for one patch
  • Cut to any shape
  • Made in America per maker

Watch-outs

  • One sheet covers only 288 square inches
  • Wrong form for wrapping a hose
  • Needs a flat, clean surface
  • Edges can lift if not pressed firmly

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch: what owners report

Owners who mention this sheet in listing feedback most often praise the single-piece coverage, because a firewall patch with no seams keeps heat out better than a taped-together one. See the DEI Reflect-A-Gold 10392 listing for the sheet size.

A recurring watch-out is the edge: buyers say the corners lift if they are not pressed firmly after the first hot run. Press the edges down again after the engine has been hot, and they will stay put.

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch: who should not buy

Skip this sheet if you need to wrap a hose, because a flat sheet cannot wrap a curve. Buy the DEI tape roll instead.

DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inch: pair it with

Pair it with a roller, so the sheet presses down fully with no air trapped underneath.

Check Price

We may earn a commission at no cost to you.

Lay the sheet from one edge, so air pushes out ahead of it instead of getting trapped. See our guide on best winch battery for more on this.

Best Budget: FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold

BEST BUDGET

Why the FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold is our pick

The FIREWESS Aluminum Foil Heat Shield Tape is the budget gold tape in this guide, for owners who need to wrap a hose without paying for a premium brand. It is a 2-inch by 15-ft gold foil tape with a fiberglass backing and a self-adhesive back, and it suits light-duty hose and intake protection where the heat is moderate and the budget is tight.

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold key specs

  • 2 inch by 15 ft roll
  • Gold aluminum foil tape
  • Fiberglass heat shield backing
  • Self-adhesive, sticks to hoses and intake
  • For hose and auto use per maker
  • Heat resistant per maker
  • Cut to length with scissors
  • Ships from Amazon per listing
  • Budget gold tape option

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold: fits and best for

This tape fits owners who need a budget gold tape for hose and intake protection on a tight budget.

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold pros and watch-outs

Pros

  • Low cost for a 15-ft roll
  • Gold foil reflects heat
  • Fiberglass backing adds strength
  • Self-adhesive, easy to apply
  • 2-inch width wraps hoses in one pass

Watch-outs

  • No published reflection figure
  • Adhesive weaker than premium tapes
  • Not for the hottest parts
  • Heat rating less clearly stated

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold: what owners report

Owners who mention this tape in listing feedback most often praise the low cost, because a 15-ft roll for hose work is cheap enough to keep on the shelf. See the FIREWESS Heat Shield Tape listing for the tape size.

A recurring watch-out is the adhesive: buyers say it can lift on the hottest hoses, and a premium tape holds better there. Use this tape on cooler hoses, and keep DEI for the parts nearest the exhaust.

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold: who should not buy

Skip this tape if the part sits next to the exhaust manifold, because the adhesive may not hold. Buy DEI Reflect-A-Gold instead.

FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft Gold: pair it with

Pair it with a degreaser, so the surface is clean enough for the adhesive to hold.

Check Price

We may earn a commission at no cost to you.

Use it on cooler hoses first, and save the premium tape for the hottest parts. See our guide on best atv winch for more on this.

Spec comparison

ProductDetail
DEI Reflect-A-Gold Tape 10396 2 inch by 15 ftKey spec: 2 inch by 15 ft, reflects up to 80 percent radiant heat, adhesive backed
DEI Reflect-A-Gold Tape 10396 2 inch by 15 ftBest for: Best Overall
DEI Reflect-A-Gold Tape 10396 2 inch by 15 ftCheck Price
Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inchKey spec: 12 by 24 inch sheet, adhesive backed, radiant heat to 2000 degrees F
Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inchBest for: Best Sheet
Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier 12 inch by 24 inchCheck Price
DEI Reflect-A-Gold Tape 10397 2 inch by 30 ftKey spec: 2 inch by 30 ft, reflects up to 80 percent radiant heat, adhesive backed
DEI Reflect-A-Gold Tape 10397 2 inch by 30 ftBest for: Best Long Roll
DEI Reflect-A-Gold Tape 10397 2 inch by 30 ftCheck Price
DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inchKey spec: 12 by 24 inch sheet, adhesive backed, reflects up to 80 percent radiant heat
DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inchBest for: Best Small Sheet
DEI Reflect-A-Gold Sheet 10392 12 inch by 24 inchCheck Price
FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft GoldKey spec: 2 inch by 15 ft, gold aluminum foil, fiberglass backed, self-adhesive
FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft GoldBest for: Best Budget
FIREWESS Aluminum Foil Heat Shield Tape 2 inch by 15 ft GoldCheck Price

Installation and setup basics

Installing heat shield tape takes twenty minutes and no tools beyond a pair of scissors and a cloth. Start by cleaning the part with a degreaser, then with isopropyl alcohol, and let it dry fully. Cut the tape to length, peel the backing a little at a time, and press the tape down as you go, so no air gets trapped underneath. Wrap a hose with a half-width overlap, and press each turn down firmly with a cloth.

For a flat panel, cut the sheet to size with a little extra around the edges, peel the backing, and lay the sheet down from one edge so air pushes out ahead of it. Run a roller or a cloth over the whole surface, then trim the edges with a sharp blade. Let the tape sit for a day before you run the engine hard, so the adhesive sets fully before the heat arrives.

Safety essentials

  • Let the engine cool fully before you work in the engine bay.
  • Wear gloves when you cut tape, because the edges are sharp.
  • Never apply tape to an exhaust pipe or a catalytic converter.
  • Keep tape away from moving parts like belts and fans.
  • Check that the tape does not block a drain or a vent.
  • Inspect the tape after the first hot run, and re-press any lifted edge.

Inspect the tape after the first hot run, not just when you install it. Check that every edge is still stuck, that no corner has lifted, and that the tape has not slid toward a moving part. A strip of tape that peels off and lands on a belt can wrap around a pulley, and a strip that lands on the exhaust can smoke and smell for days.

Keep the tape away from the exhaust itself, because no adhesive tape can take exhaust temperatures. If the tape is discolored, brittle, or peeling after a short time, the part is hotter than the tape is rated for, and you need a shield or a wrap made for that temperature. Tape is a shield for nearby parts, not a wrap for the heat source itself.

Troubleshooting

SymptomCauseFix
Tape peels after a weekSurface was oily, or adhesive too weak for the heatClean with degreaser and alcohol, and use a high-temperature tape
Tape bubbles under heatAir trapped under the tape during installPrick the bubble, press it flat, and re-press the edges
Edges lift on a curved hoseTape too wide for the curve, or no overlapUse a narrower tape and wrap with a half-width overlap
Tape discolors and turns brittlePart hotter than the tape ratingMove the part, or add a shield made for higher heat
Tape slides toward a beltTape applied too close to a moving partTrim the tape back and check clearance with the engine running
Adhesive leaves residue on removalAdhesive baked on over timeWarm the tape with a heat gun and peel slowly, then clean with alcohol

Who should NOT buy these heat shield tapes

Owners wrapping an exhaust pipe. Heat shield tape cannot take exhaust temperatures, and it will burn, peel, and smoke. Buy an exhaust wrap or a heat shield made for exhaust heat instead, and keep tape on the parts that need protection from the exhaust.

Owners with a stock car and no heat problem. If your intake temperatures are fine and nothing is melting, tape adds nothing. Spend the money on maintenance instead, and only add tape when a real heat problem shows up.

Owners who will not clean the surface. Tape sticks to a clean surface and peels from an oily one. If you will not degrease the part first, the tape will fail in a week, and you will blame the tape for a preparation problem.

Owners who need a structural shield. Tape is a thin reflective layer, not a rigid shield. If the part needs protection from flying stones or physical damage, buy a metal shield instead, and use tape as the reflective layer on top of it.

Final verdict

DEI Reflect-A-Gold Tape 10396: the best automotive heat shield tape for most owners.

Thermo-Tec 13575: the best adhesive-backed barrier sheet for flat panels.

DEI Reflect-A-Gold Tape 10397: the best long roll for a full intake run.

DEI Reflect-A-Gold Sheet 10392: the best small sheet for a firewall patch.

FIREWESS Aluminum Foil Heat Shield Tape: the best budget gold tape for hoses.

FAQ

What is heat shield tape used for in a car?

Heat shield tape reflects radiant heat away from parts that sit near a hot exhaust or a hot engine. Owners wrap it around intake pipes, fuel lines, and wiring, and stick it to airboxes, firewalls, and floors. It lowers the temperature of the part it covers, which keeps intake air cooler and stops plastic and rubber parts from aging early in the heat.

Does DEI Reflect-A-Gold really reflect 80 percent of radiant heat?

Yes, the maker states that Reflect-A-Gold reflects up to 80 percent of radiant heat, based on laboratory testing of the metalized polyamide surface. The figure is for radiant heat, not for conduction, so the tape works best on parts that face a hot surface across an air gap. A part that touches the exhaust directly needs a shield, not just tape.

Can I put heat shield tape on an exhaust pipe?

No, heat shield tape is not made for exhaust temperatures, and it will burn, peel, and smoke if you wrap an exhaust pipe with it. Tape belongs on the parts that need protection from the exhaust, such as intake pipes, fuel lines, and firewalls. For the exhaust itself, use an exhaust wrap or a metal heat shield made for that temperature.

How do I apply heat shield tape so it stays stuck?

Clean the surface with a degreaser, then with isopropyl alcohol, and let it dry fully before you apply the tape. Peel the backing a little at a time, press the tape down as you go, and wrap hoses with a half-width overlap. Press the tape firmly with a cloth to push out air bubbles, and let the adhesive set for a day before you run the engine hard.

What is the difference between gold tape and aluminum tape?

Gold tape like DEI Reflect-A-Gold uses a metalized polyamide layer laminated to glass fiber cloth, which reflects more radiant heat and takes higher temperatures. Plain aluminum foil tape is cheaper and suits light-duty hose protection, but it reflects less heat and its adhesive is usually weaker. Buy gold tape for the hottest parts and aluminum tape for the cooler ones.

Will heat shield tape lower my intake air temperature?

Yes, wrapping an intake pipe with reflective tape lowers the temperature of the air inside it, because the pipe absorbs less heat from the engine bay. The gain is largest on a hot day after a heat soak, when an unwrapped pipe can be far hotter than the air it carries. The tape will not fix a poorly routed intake, but it helps a good intake stay cool.

How long does heat shield tape last?

A well-applied tape lasts for years, because the reflective layer does not wear out and the adhesive is made for heat cycling. The tape fails first at the edges, where heat and vibration lift a corner, so check the edges after the first hot run and re-press any that have lifted. A tape that was applied to a dirty surface can peel within a week.

Can I use heat shield tape on a fuel line?

Yes, fuel lines are one of the best uses for heat shield tape, because a hot fuel line can cause vapor lock and poor running. Wrap the fuel line with a half-width overlap, keep the tape away from the exhaust itself, and check that the tape does not trap water against the line. A wrapped fuel line stays cooler and the engine runs more consistently on a hot day.

More in this field: best snatch blocks to prevent falls, best heavy duty winch extension straps quick disconnect, best ball joint separators for trucks, best clutch alignment tools comparison, best contact cleaners on the market, best air compressor silencer, cordless commercial tire inflators review consumer reports, cordless tire inflators review for cars, best heavy duty winch covers for trucks, best heavy duty snatch blocks vs regular.

Sources


By Leo, Founder, WinchInsider

Leo founded WinchInsider and writes about winches, recovery gear, and roadside tools, drawing on maker specifications and owner feedback to help readers choose gear that fits their vehicle and their job.

Related guides

Top pick: DEI Reflect-A-Gold Tape 10396 2 inch by 15 ft

Check Price