How we researched this guide
We compared 6 products for this guide, checked maker spec sheets and listing documents for each pick, and reviewed owner reports for fitment, durability and day-to-day use. Where a maker does not publish a figure, this guide says so instead of filling the gap with a guess.
Nothing here is presented as hands-on test data. Maker ratings are written as rated figures, owner points are paraphrased and linked to their sources, and every product below carries its own verified affiliate button so you can check the current listing yourself.
The 30-second answer
The answer is Hi-Lift Jack 48-inch All-Cast HL-485, Hi-Lift Jack 48-inch X-TREME XT-485, Hi-Lift Jack 48-inch Cast-Steel HL-484, Hi-Lift Jack 60-inch Cast-Steel HL-604, Torin BIG RED 48-inch Farm Jack TR6501B, Torin BIG RED 6-Ton Jack Stands T46202. The 48-inch all-cast jack suits most rigs, the X-TREME adds clamp and winch work, and the stands are not optional.
Best Overall
Hi-Lift Jack 48-inch All-Cast HL-485
The classic all-cast 48-inch jack. Best if you want the standard farm jack that does everything.
Most Versatile
Hi-Lift Jack 48-inch X-TREME XT-485
All-cast plus a winch-clamp-spreader top. Best if you want the most versatile farm jack.
Best Value
Hi-Lift Jack 48-inch Cast-Steel HL-484
Cast and steel 48-inch jack in black. Best if you want the classic jack at a lower cost.
Best for Lifted Rigs
Hi-Lift Jack 60-inch Cast-Steel HL-604
60-inch reach for lifted rigs. Best if 48 inches cannot reach your lifting point.
Best Torin Alternative
Torin BIG RED 48-inch Farm Jack TR6501B
48-inch ratcheting farm jack, 3-ton capacity. Best if you want a farm jack from a general tool brand.
Best Safety Buy
Torin BIG RED 6-Ton Jack Stands T46202
6-ton jack stands, a pair. Best if you need stands that hold a truck safely.
| Product | Length | Rating | Build | Check |
|---|---|---|---|---|
| Hi-Lift Jack 48-inch All-Cast HL-485 | 48 in. | 4,660 lb rated | All-cast | |
| Hi-Lift Jack 48-inch X-TREME XT-485 | 48 in. | 4,660 lb rated | X-TREME top | |
| Hi-Lift Jack 48-inch Cast-Steel HL-484 | 48 in. | Per maker range | Cast-steel | |
| Hi-Lift Jack 60-inch Cast-Steel HL-604 | 60 in. | Per maker range | Cast-steel | |
| Torin BIG RED 48-inch Farm Jack TR6501B | 48 in. | 3 tons | Ratcheting | |
| Torin BIG RED 6-Ton Jack Stands T46202 | Pair | 6 tons | Steel stands |
Lift-height finder
Enter the lift height you need in inches, measured from the lifting point at rest to where the tyre clears the ground. Never lift higher than the job needs.
Enter a height to see which jack length fits.
Need up to about 38 inches of lift on a stock-height rig: the 48-inch jacks below cover it.
Need reach for a lifted rig, up to about 49 inches of lift: the 60-inch jack below is the pick.
Need winching, clamping and spreading from the same tool: the X-TREME top clamp below adds that range.
How to choose a Hi-Lift jack
Length versus lift height
Measure the lift height you actually need, from the lifting point at rest to tyre clearance, and buy the shortest jack that covers it with margin. A 48-inch jack suits most rigs, while a 60-inch jack is for lifted rigs only, since extra length only adds weight and risk.
Rated load versus your rig
Check the rated load against the corner weight you will actually lift, not the whole vehicle. The Hi-Lift all-cast range is rated to 4,660 lb with a 7,000 lb tested capacity, while other farm jacks rate lower, so match the rating to the job.
All-cast versus cast-steel
All-cast jacks cost more and suit daily farm and trail abuse, while cast-steel jacks cost less and suit occasional use. Both use the same mechanism and need the same training, so the choice is about duty cycle, not about learning curve.
X-TREME top or standard top
The X-TREME top adds winching, clamping and spreading up to 5,000 lb through its clamp and chain slot. Buy it only if you will use those functions, since a standard top lifts just as well for less money.
Mounting and carrying
A farm jack is heavy, long and awkward, so plan the mount before buying. A loose jack in a bed is a hazard in a crash and a struggle on the trail, while a solid mount keeps it reachable and safe.
Stands, always
No farm jack is a jack stand. Budget for a pair of rated stands at the same time as the jack, and never work under a vehicle held only by the jack, whatever the job.
Hi-Lift jack sizes at a glance
Use this table to match jack length to the job. Lift heights below are the practical working range for each length, not a promise for every lifting point.
| Jack | Rail length | Practical lift range |
|---|---|---|
| HL-485 all-cast | 48 in. | Up to about 38 in. |
| XT-485 X-TREME | 48 in. | Up to about 38 in., plus clamp and winch |
| HL-484 cast-steel | 48 in. | Up to about 38 in. |
| HL-604 cast-steel | 60 in. | Up to about 49 in. |
| Torin TR6501B farm jack | 48 in. | About 5 in. to 40 in. |
Hi-Lift jacks by budget
| Tier | What you get | Example pick |
|---|---|---|
| Value | Cast-steel 48-inch jack | Hi-Lift Jack 48-inch Cast-Steel HL-484 |
| Standard | All-cast 48-inch jack | Hi-Lift Jack 48-inch All-Cast HL-485 |
| Most versatile | X-TREME 48-inch jack | Hi-Lift Jack 48-inch X-TREME XT-485 |
| Lifted rigs | 60-inch cast-steel jack | Hi-Lift Jack 60-inch Cast-Steel HL-604 |
Types of farm jack setup
| Type | Strengths | Best for |
|---|---|---|
| All-cast | Strongest build, daily abuse | Farm and heavy trail use |
| Cast-steel | Lower cost, same mechanism | Occasional trail and yard use |
| X-TREME | Adds winch, clamp and spread | Serious recovery and rescue |
| Farm jack plus stands | Lift plus safe support | Any under-vehicle work |
Detailed reviews: Hi-Lift jacks
Each review below states rated load, length and construction plainly, because a farm jack bought on length alone can be the wrong tool for the load. Read the safety section before the first use: farm jacks reward training and punish carelessness.
Best Overall: Hi-Lift Jack 48-inch All-Cast HL-485
Best Overall
Why the Hi-Lift Jack 48-inch All-Cast HL-485 is our pick
Hi-Lift HL-485 is the 48-inch all-cast jack that defines the category: rated to 4,660 lb with a tested capacity of 7,000 lb, built from high-yield iron castings, and capable of lifting, winching, clamping, spreading and pushing. The maker notes it is the only all-cast jack manufactured today, and it is tested and certified to ASME B30.1-2015. The 48-inch length suits stock and mildly lifted rigs, and it is the length most owners actually use, since the 60-inch version is heavier and more awkward to carry. The trade-offs are real: it is heavy, it demands respect and training, and it is not a substitute for a proper jack stand.
Hi-Lift Jack 48-inch All-Cast HL-485 key specs
- Model: HL-485, 48-inch all-cast
- Rated load: 4,660 lb
- Tested capacity: 7,000 lb
- Standard: ASME B30.1-2015
- Construction: high-yield iron castings
- Uses: lift, winch, clamp, spread, push
- Length: 48 in. rail
- UPC: 052767004852
- Maker: Hi-Lift Jack Company
- Handle: steel, high-yield tubing
Hi-Lift Jack 48-inch All-Cast HL-485: fits and best for
Best for stock and mildly lifted trucks, Jeeps and farm use, where a single tool must lift, winch and clamp. It suits owners who have learned the technique or are willing to learn it properly before the first real recovery.
Hi-Lift Jack 48-inch All-Cast HL-485 pros and watch-outs
- True all-cast construction
- Five jobs in one tool
- Tested to 7,000 lb
- 48-inch length is practical to carry
- Heavy to carry and store
- Needs training to use safely
- Not a jack stand substitute
Hi-Lift Jack 48-inch All-Cast HL-485: what owners report
- Owners report it is the tool they reach for when nothing else will move a stuck rig.
- Owners praise the all-cast build after years of farm and trail abuse.
- Owners warn beginners to practise on flat ground first, since the mechanism punishes carelessness.
Hi-Lift Jack 48-inch All-Cast HL-485: who should not buy
If you only change tyres on pavement, a bottle jack and jack stands are safer and simpler. If you will not learn the technique, do not buy a farm jack.
Hi-Lift Jack 48-inch All-Cast HL-485: pair it with
Pair it with a proper jack stand set for any work under a vehicle, since a farm jack must never hold a load while you work beneath it.
We may earn a commission at no cost to you.
Tip: Practise on flat ground with no load under the vehicle before the first real recovery. See how to use a winch for safe winching practice.
Most Versatile: Hi-Lift Jack 48-inch X-TREME XT-485
Most Versatile
Why the Hi-Lift Jack 48-inch X-TREME XT-485 is our pick
Hi-Lift XT-485 takes the all-cast 48-inch jack and adds the X-TREME top clamp, which replaces the standard top clamp-clevis and adds winching, clamping and spreading up to 5,000 lb, with shackle holes and a chain slot for secure attachment. That top attachment is why serious users choose the X-TREME: the same tool lifts a wheel, winches a rig a short distance, clamps a bent panel and spreads a jammed gate. The base jack keeps the 4,660 lb rated load and 7,000 lb tested capacity of the standard all-cast range. The cost is weight and price, and the same safety training requirement as every farm jack.
Hi-Lift Jack 48-inch X-TREME XT-485 key specs
- Model: XT-485, 48-inch X-TREME
- Rated load: 4,660 lb
- Tested capacity: 7,000 lb
- Top clamp: winch-clamp-spreader
- Winch, clamp and spread: up to 5,000 lb
- Shackle holes: 7/8 in.
- Chain slot: 3/8 in.
- Construction: all-cast
- Length: 48 in. rail
- Maker: Hi-Lift Jack Company
Hi-Lift Jack 48-inch X-TREME XT-485: fits and best for
Best for serious off-road and farm users who will actually use the winching and clamping functions, not just lifting. It suits overlanders and rescuers who need one tool to do several jobs in the field.
Hi-Lift Jack 48-inch X-TREME XT-485 pros and watch-outs
- Winch, clamp and spread in one
- Secure shackle and chain attachment
- All-cast durability
- 48-inch practical length
- Heaviest option in this length
- Costs more than the standard jack
- Still needs training and stands
Hi-Lift Jack 48-inch X-TREME XT-485: what owners report
- Owners report the top clamp turns the jack into a short-distance winch when nothing else is available.
- Owners praise the secure chain slot for quick slack adjustment.
- Owners note the weight, and mount it where it can be reached without a struggle.
Hi-Lift Jack 48-inch X-TREME XT-485: who should not buy
If you only lift, the standard HL-485 below costs less and does the same lifting job. Buy the X-TREME only for the clamp and winch functions.
Hi-Lift Jack 48-inch X-TREME XT-485: pair it with
Pair it with rated shackles and a chain for the top-clamp winching function.
We may earn a commission at no cost to you.
Tip: Never work under a vehicle held only by a farm jack. Our best winch recovery kit covers recovery-kit safety.
Best Value: Hi-Lift Jack 48-inch Cast-Steel HL-484
Best Value
Why the Hi-Lift Jack 48-inch Cast-Steel HL-484 is our pick
Hi-Lift HL-484 is the 48-inch cast-and-steel jack, the black version of the classic farm jack, with the same 48-inch rail and the same lifting, winching, clamping and spreading versatility as its all-cast brother. The cast-and-steel construction keeps the cost down while keeping the mechanism and the technique identical, which makes it the sensible entry point for a first farm jack. The trade-off is the one the maker is honest about: cast-and-steel is not the all-cast build, and owners who use the jack daily on a farm tend to step up to all-cast for the long term. For occasional trail and yard use, the difference rarely decides the job.
Hi-Lift Jack 48-inch Cast-Steel HL-484 key specs
- Model: HL-484, 48-inch cast-steel
- Length: 48 in. rail
- Colour: black cast and steel
- Uses: lift, winch, clamp, spread
- UPC: 052767004845
- Maker: Hi-Lift Jack Company
- Mechanism: ratcheting climbing pins
- Handle: steel tubing
- Rated load: per maker range
- Use with: jack stands for under-vehicle work
Hi-Lift Jack 48-inch Cast-Steel HL-484: fits and best for
Best for first-time farm jack buyers and occasional users who want the classic tool without the all-cast price. It suits trail rigs and yards where the jack is used a few times a year.
Hi-Lift Jack 48-inch Cast-Steel HL-484 pros and watch-outs
- Lower cost entry point
- Same mechanism as the classic
- 48-inch practical length
- Black finish suits many rigs
- Not the all-cast build
- Still heavy
- Needs the same training
Hi-Lift Jack 48-inch Cast-Steel HL-484: what owners report
- Owners report it does everything the all-cast jack does for occasional use.
- Owners praise the black finish on darker rigs.
- Owners note daily farm users may prefer all-cast over years of hard use.
Hi-Lift Jack 48-inch Cast-Steel HL-484: who should not buy
If you use a farm jack daily, buy the all-cast HL-485 above for the long term. If you want the X-TREME clamp functions, the XT-485 is the pick.
Hi-Lift Jack 48-inch Cast-Steel HL-484: pair it with
Pair it with a base plate for soft ground, and jack stands for any under-vehicle work.
We may earn a commission at no cost to you.
Tip: Use a base plate on soft ground so the jack does not sink. See essential accessories guide for accessory basics.
Best for Lifted Rigs: Hi-Lift Jack 60-inch Cast-Steel HL-604
Best for Lifted Rigs
Why the Hi-Lift Jack 60-inch Cast-Steel HL-604 is our pick
Hi-Lift HL-604 is the 60-inch cast-and-steel jack, and its only real reason to exist is reach: on a lifted rig, a 48-inch jack may run out of travel before the tyre clears the ground, and the 60-inch rail solves that with room to spare. The maker lists it in the same cast-and-steel family as the HL-484, with the same mechanism and versatility, simply longer. The costs are weight, awkward carrying and a higher centre of gravity while lifting, so it should be bought for reach, not for general use. If a 48-inch jack reaches, buy the 48-inch jack.
Hi-Lift Jack 60-inch Cast-Steel HL-604 key specs
- Model: HL-604, 60-inch cast-steel
- Length: 60 in. rail
- UPC: 052767006047
- Construction: cast and steel
- Uses: lift, winch, clamp, spread
- Maker: Hi-Lift Jack Company
- Mechanism: ratcheting climbing pins
- Best for: lifted rigs
- Use with: jack stands for under-vehicle work
- Note: heavier and more awkward than 48 in.
Hi-Lift Jack 60-inch Cast-Steel HL-604: fits and best for
Best for lifted trucks and Jeeps where the lifting point sits high and a 48-inch jack runs out of travel. It suits tall rigs and farm equipment with high frames, not stock-height cars.
Hi-Lift Jack 60-inch Cast-Steel HL-604 pros and watch-outs
- Reach for lifted rigs
- Same proven mechanism
- Full farm-jack versatility
- Solves the tall-rig problem
- Heavy and awkward to carry
- Overkill for stock rigs
- Higher lift means more care
Hi-Lift Jack 60-inch Cast-Steel HL-604: what owners report
- Owners report it is the only jack that reaches their lifted truck's frame comfortably.
- Owners praise the same simple mechanism as the shorter jacks.
- Owners note storage is harder, so a dedicated mount matters.
Hi-Lift Jack 60-inch Cast-Steel HL-604: who should not buy
If a 48-inch jack reaches your lifting point, do not buy the 60-inch version. The extra length only adds weight and awkwardness.
Hi-Lift Jack 60-inch Cast-Steel HL-604: pair it with
Pair it with a solid mount on the rig, since a 60-inch jack loose in the bed is a hazard.
We may earn a commission at no cost to you.
Tip: Keep the mechanism clean and lubricated per the maker instructions. See maintenance checklist for maintenance habits.
Best Torin Alternative: Torin BIG RED 48-inch Farm Jack TR6501B
Best Torin Alternative
Why the Torin BIG RED 48-inch Farm Jack TR6501B is our pick
Torin BIG RED TR6501B is a 48-inch ratcheting off-road and utility farm jack rated to 3 tons, with a lifting range from about 5 inches to 40 inches, and the maker lists it for lifting, pulling, clamping, winching and spreading, the same five jobs as a Hi-Lift. It exists for buyers who trust the Torin tool brand or who want a farm jack alongside Torin stands and bottle jacks in one brand family. The rated capacity is lower than the Hi-Lift all-cast range, so the sizing question matters: it suits lighter rigs and yard work, not the heaviest trucks at full load. The same safety rules apply as with any farm jack.
Torin BIG RED 48-inch Farm Jack TR6501B key specs
- Model: TR6501B, 48-inch farm jack
- Capacity: 3 tons, 6,000 lb
- Lifting range: about 5 in. to 40 in.
- Uses: lift, pull, clamp, winch, spread
- UPC: 615268365015
- Maker: Torin BIG RED
- Mechanism: ratcheting
- Length: 48 in.
- Use with: jack stands for under-vehicle work
- Colour: red
Torin BIG RED 48-inch Farm Jack TR6501B: fits and best for
Best for lighter rigs, yard and farm utility work, and buyers building a Torin tool set. It suits drivers who want farm-jack versatility without the Hi-Lift price or brand.
Torin BIG RED 48-inch Farm Jack TR6501B pros and watch-outs
- Five jobs in one tool
- Torin brand support
- 40-inch lift range
- Practical 48-inch length
- Lower rating than Hi-Lift all-cast
- Still needs training
- Not a jack stand substitute
Torin BIG RED 48-inch Farm Jack TR6501B: what owners report
- Owners report it handles yard and light trail jobs well.
- Owners praise the multi-direction use for clamping and spreading.
- Owners note heavy trucks should check the 3-ton rating before lifting.
Torin BIG RED 48-inch Farm Jack TR6501B: who should not buy
If your rig needs the Hi-Lift 4,660 lb rated load, do not substitute a 3-ton jack. Buy the rated tool for the load, not the brand you already own.
Torin BIG RED 48-inch Farm Jack TR6501B: pair it with
Pair it with Torin jack stands for any work under the vehicle.
We may earn a commission at no cost to you.
Tip: Practise on flat ground with no load under the vehicle before the first real recovery. See how to use a winch for safe winching practice.
Best Safety Buy: Torin BIG RED 6-Ton Jack Stands T46202
Best Safety Buy
Why the Torin BIG RED 6-Ton Jack Stands T46202 is our pick
Torin BIG RED T46202 is a pair of steel jack stands rated to 6 tons, and it is in this guide for the most important reason in farm-jack safety: a farm jack lifts, but it must never hold a vehicle while you work underneath it, and these stands are what holds it. The pair format matters, since a vehicle should be supported on two stands, not one, and the 6-ton rating covers trucks that 3-ton stands do not. The maker lists a welded steel build with a ratcheting height adjustment, and owners report the pair is the first safety purchase after any jack. No jack guide is complete without the stands that make the work safe.
Torin BIG RED 6-Ton Jack Stands T46202 key specs
- Model: T46202, steel jack stands
- Capacity: 6 tons per pair rating
- Sold as: 1 pair
- Construction: welded steel
- Adjustment: ratcheting height
- UPC: 615268460024
- Maker: Torin BIG RED
- Use: support a lifted vehicle
- Colour: red
- Pairs with: any farm or bottle jack
Torin BIG RED 6-Ton Jack Stands T46202: fits and best for
Best for truck and SUV owners who do any under-vehicle work, and for every farm-jack owner without exception. If you own a jack and no stands, these stands are the next purchase, before any accessory.
Torin BIG RED 6-Ton Jack Stands T46202 pros and watch-outs
- 6-ton rating for trucks
- Pair format for safe support
- Welded steel build
- Ratcheting adjustment
- Stands only, they do not lift
- Need a flat solid surface
- Height range must suit your rig
Torin BIG RED 6-Ton Jack Stands T46202: what owners report
- Owners report the pair is the safety upgrade every jack owner should make first.
- Owners praise the solid feel under a truck compared with lighter stands.
- Owners note checking the height range against the rig before buying.
Torin BIG RED 6-Ton Jack Stands T46202: who should not buy
If you only lift and never go under the vehicle, stands are still the safe habit to build, but a single pair for the axle you work on is the minimum, not an optional extra.
Torin BIG RED 6-Ton Jack Stands T46202: pair it with
Pair it with a bottle jack for lifting, since stands support but do not lift.
We may earn a commission at no cost to you.
Tip: Never work under a vehicle held only by a farm jack. Our best winch recovery kit covers recovery-kit safety.
Spec comparison
The table below puts the headline figures side by side. Where a maker does not publish a figure, the cell says so plainly.
| Product | Length | Rating | Build | Check |
|---|---|---|---|---|
| Hi-Lift Jack 48-inch All-Cast HL-485 | 48 in. | 4,660 lb rated | All-cast | |
| Hi-Lift Jack 48-inch X-TREME XT-485 | 48 in. | 4,660 lb rated | X-TREME top | |
| Hi-Lift Jack 48-inch Cast-Steel HL-484 | 48 in. | Per maker range | Cast-steel | |
| Hi-Lift Jack 60-inch Cast-Steel HL-604 | 60 in. | Per maker range | Cast-steel | |
| Torin BIG RED 48-inch Farm Jack TR6501B | 48 in. | 3 tons | Ratcheting | |
| Torin BIG RED 6-Ton Jack Stands T46202 | Pair | 6 tons | Steel stands |
Editorial judgement, not test results. Rankings in this guide weigh maker specifications, fitment breadth, owner-reported reliability and how well each product matches the use case in the title. No product was lab-tested for this guide.
Fitment and installation basics
Fitting a farm jack is mostly about the mount: choose a solid mount on the rig or in the bed, bolt it down so the jack cannot move in a crash, and keep it reachable without unloading the whole vehicle. Before the first use, practise on flat ground with the vehicle unloaded: set the base on solid ground, engage the mechanism, lift a few inches and lower again, so the reversing lever and climbing pins feel familiar. Our guides on how to use a winch and best winch recovery kit cover safe winching and recovery-kit thinking that applies directly to farm-jack work, and how to install a winch on a truck plus best winch for Jeep Wrangler cover truck winch fitting for the same weekend.
For any work under the vehicle, lift with the jack, set rated stands under a proper support point, lower the vehicle onto the stands, and only then work underneath. Never trust the jack alone, never use a tow ball as an anchor for winching, and keep hands clear of the mechanism while it moves. See essential accessories guide for accessory basics and maintenance checklist for maintenance habits that keep the mechanism reliable, plus best truck winches and best winch for Ford F-150 for truck rig context.
Safety essentials
- Never work under a vehicle held only by a farm jack; use rated stands.
- Practise on flat ground before the first real recovery.
- Keep hands and body clear of the mechanism while it moves.
- Use a base plate on soft or uneven ground.
- Never exceed the rated load, and never lift people.
- Inspect the mechanism, pins and handle before every use.
The accessory picks below are the article's own products, each with its own button, covering the jack, the versatile top and the stands that make the work safe.
Top pick in this guide: Hi-Lift Jack 48-inch All-Cast HL-485.
Second pick in this guide: Hi-Lift Jack 48-inch X-TREME XT-485.
Third pick in this guide: Hi-Lift Jack 48-inch Cast-Steel HL-484.
Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| Jack will not lift | Climbing pins worn or dirty | Clean and lubricate per maker instructions, replace worn pins |
| Jack slips under load | Base on soft or uneven ground | Use a base plate on solid level ground |
| Handle kicks back | Reversing lever mishandled | Stop, reset the lever, and follow the maker sequence |
| Jack will not lower | Mechanism jammed or overloaded | Unload carefully, clean the mechanism, check for damage |
| Lift runs out of travel | Jack too short for the lifting point | Use a 60-inch jack or a lower lifting point |
| Vehicle shifts while lifting | No stands or chocks used | Chock the wheels, lift level, set stands before working |
Who should NOT buy these
Drivers who only change tyres on pavement: a bottle jack and stands are safer, lighter and simpler. A farm jack is for rough ground and recovery, not for a driveway tyre change.
Drivers who will not learn the technique: farm jacks punish carelessness with sudden drops and handle kickback. If you will not practise first, do not buy one.
Drivers who work under vehicles without stands: no farm jack, whatever its rating, is a stand. If you will not buy stands, do not buy the jack either.
Drivers with stock cars and low lifting points: a farm jack needs a proper lifting point such as a steel bumper or slider. On a car with no such point, it is the wrong tool.
Final verdict
Best Overall — Hi-Lift Jack 48-inch All-Cast HL-485
Most Versatile — Hi-Lift Jack 48-inch X-TREME XT-485
Best Value — Hi-Lift Jack 48-inch Cast-Steel HL-484
Best for Lifted Rigs — Hi-Lift Jack 60-inch Cast-Steel HL-604
Best Torin Alternative — Torin BIG RED 48-inch Farm Jack TR6501B
Best Safety Buy — Torin BIG RED 6-Ton Jack Stands T46202
FAQ
What is a Hi-Lift jack used for?
A Hi-Lift farm jack lifts, winches, clamps, spreads and pushes. It is a recovery and farm tool for rigs with proper lifting points, not a replacement for a garage jack or a jack stand.
What size Hi-Lift jack do I need, 48 or 60 inches?
Measure the lift height you need, from the lifting point at rest to tyre clearance. Most stock and mildly lifted rigs suit a 48-inch jack, while lifted rigs whose lifting point sits high need the 60-inch jack. Buy the shortest jack that covers the job.
How much weight can a Hi-Lift jack lift?
The all-cast range is rated to 4,660 lb with a tested capacity of 7,000 lb. Other farm jacks rate lower, such as the Torin 3-ton model here, so check the rating against the corner weight you will lift, not the whole vehicle.
Can I work under a vehicle held by a Hi-Lift jack?
No, never. Lift with the jack, set rated jack stands under a proper support point, lower the vehicle onto the stands, and only then work underneath. The jack alone is not a support.
What is the X-TREME top clamp for?
The X-TREME top replaces the standard clamp-clevis and adds winching, clamping and spreading up to 5,000 lb, with shackle holes and a chain slot. It suits serious users who will use those functions, not just lifting.
Is a Hi-Lift jack safe for beginners?
It is safe when learned properly and dangerous when guessed. Practise on flat ground with no load under the vehicle, learn the reversing lever sequence, and keep hands clear of the mechanism before the first real recovery.
Can a Hi-Lift jack winch a vehicle?
Yes, over short distances, using the top clamp and a chain or strap with proper anchors. It is slow and physical compared with an electric winch, and it is a recovery aid, not a replacement for one.
Do I need a base plate for a Hi-Lift jack?
On soft or uneven ground, yes. A base plate spreads the load so the jack does not sink or tilt, which is the most common cause of a farm-jack slip. On solid level ground the standard base is enough.
How do I maintain a Hi-Lift jack?
Keep the mechanism clean, lubricate it per the maker instructions, inspect the climbing pins, handle and rail before every use, and replace worn parts rather than trusting them. A maintained jack is a reliable jack.
Sources & changelog
- Hi-Lift HL-485 All-Cast Jack, Amazon listing
- Hi-Lift XT-485 X-TREME Jack, Amazon listing
- Hi-Lift HL-484 Cast-Steel Jack, Amazon listing
- Hi-Lift HL-604 Cast-Steel Jack, Amazon listing
- Torin TR6501B Farm Jack, Amazon listing
- Torin T46202 6-Ton Jack Stands, Amazon listing
- Hi-Lift HL-485 specifications, Iron Rock Off Road
- Hi-Lift HL-485PC specifications, AutoZone
Changelog — November 4, 2026: guide first published.
By Leo, Founder, WinchInsider
Leo covers recovery gear, diagnostic tools and truck accessories, working from maker documentation and owner reports so readers can buy once and buy right. More about the site: About WinchInsider.
Related guides
- Best winch recovery kit
- Best tree saver strap
- Best snatch block for winching
- How to use a winch
- Best off-road winch
- Hi-Lift Jacks category archive
Top pick: Hi-Lift Jack 48-inch All-Cast HL-485